How to replace the Front CV Axle 2009-2018 Dodge RAM 1500 🚗
ฝัง
- เผยแพร่เมื่อ 4 ก.ค. 2024
- Find the parts used in the video on CarParts.com just there carparts.solutions/RAM1500
⚙️ NEEDED CARPARTS AND PRODUCTS
- CV Axle : carparts.solutions/CVAxle_RAM...
- Penetrating oil
- Brake cleaner : carparts.solutions/BrakeCleaner
- Grease
- Silicone grease
💪 TIGHTENING TORQUES
- Lower control arm ball joint nut : 37 Ft-lbs + additional 90 degrees
- Upper control arm ball joint : 40 Ft-lbs + additional 200 degrees
- Tie rod end holding nut : 78 Ft-lbs
- Brake cliper mount bolts : 130 Ft-lbs
- Wheel hub nut : 185 Ft-lbs
🛠 TOOLS
The toolbox recommended by CARPARTS.COM to repair your Dodge RAM 1500 :
- carparts.solutions/ToolBox
List of the tools we used to replace the driveshaft on a Dodge RAM 1500 :
- Hydraulic jack : carparts.solutions/FloorJack
- Jack stands : carparts.solutions/JackStands
- Wheel lug wrench
- Breaker bar
- 35mm socket
- Ratchet
- 21mm socket
- Fork
- Hammer
- Wire brush
- 24mm socket
- Crowbar
- Paper towel
- Plastic mallet
- 12mm socket
- Torque wrench : carparts.solutions/TorqueWren...
- Flat head screwdriver
Don't forget to subscribe : / @carpartscomofficial
🛻 COMPATIBLE VEHICLES
The operation and tools displayed in the video should be available on the following vehicles :
- 2009 RAM 1500
- 2010 RAM 1500
- 2011 RAM 1500
- 2012 RAM 1500
- 2013 RAM 1500
- 2014 RAM 1500
- 2015 RAM 1500
- 2016 RAM 1500
- 2017 RAM 1500
- 2018 RAM 1500
📽 🛠 USEFUL VIDEOS 🛠 📽
- How to jack your RAM1500 safely : • How to jack your 2009-...
- How to replace the Outer Tie Rod 2009-2018 Dodge RAM 1500 🚗 : • How to replace the Out...
⚠️ CARPARTS.COM'S INFOS
- Don't forget to remove the cable that you used to hold the caliper assembly together.
🚨 DISCLAIMER
This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area.
📚 CHAPTERS
0:00 Intro
0:10 Loosen the wheel hub
0:30 How to pull up your RAM 1500
1:07 Remove the brake system
2:06 Remove the control arms ball joints
3:21 Remove the outer tie rod
3:31 Remove the steering knuckle
4:21 Remove the CV Axle
4:41 Remove the stub shaft
4:53 Clean the elements
5:18 Put the stub shaft back
5:31 Put the CV axle back
5:58 Put the steering knuckle back + tightening torques
7:13 Put the outer tie rod back
7:44 Put the brake system back
8:51 Replace the hub nut
9:23 Put your RAM 1500 back on the ground - ยานยนต์และพาหนะ
From all of the videos I have watched on TH-cam on how to fix vehicles. This is one of the best very descriptive. Great video. Thank you for posting.
Hello Jamieamy ! Thanks for your great comment. We're glad we could help. 😀👌
This is extremely well done - all the information you need (including socket sizes ), great lighting, put together in a concise manner!
Hello JohnPaul! Thank you very much for your comment, it's a real pleasure to read. We try to make the most educational videos possible 😁
Good description
Thanks David! We're glad the video helped you 😄✌
Also, what is the reason for not greasing the cone? Cheers!
Where you used grease for where the joints and tie-rod are seated against the steerong knuckle, would anti-seize not be just as good?
On the end of the transmission
Yea I was like wait a minute lol
Better inspect or replace stub shaft.
NOT for 2010 FWD. This is probably for 2012 or 2013 or even newer.
Plus, the passenger side is different.