How to Replace O2 Oxygen Sensor 97-03 Buick LeSabre
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- Buy Now!
New O2 Oxygen Sensor from 1AAuto.com 1aau.to/ia/1AEO...
1A Auto shows you how to remove, install, change or replace an oxygen O2 sensor. This video is applicable to the Buick LeSabre, model years 97, 98, and 99.
🔧 List of tools used:
• 7/8 Inch Spark Plug Socket 1aau.to/oX/1AXA...
• 3/8 Inch Breaker Bar
• Socket Extensions 1aau.to/o8L/1AX...
For More Info visit us at 1aau.to/h/bpz/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
![โรงเรียนตอนตี 2 โคตรหลอน..!! [โรงเรียนไดเม่]](http://i.ytimg.com/vi/2MAEMwqVYh8/mqdefault.jpg)
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
I bought this part from advance auto for 63.00 dollars then I went on your website and found it for 35.00 dollars so I bought it from you and will be returning the one from advance. Thanks for all you do to help us save money
i love you guys. helped me save a ton of money on my 99 lesabre, yet again. took literally 5 minutes to swap my fried o2 sensor, didnt even need pb blaster or a cheater bar.
+spammemang Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/1A/oxygen-sensors/Buick/LeSabre/1AEOS01008?TH-cam&CTA+Comment&VKWlHUDDo
This 1AAuto video helped me put this new part in my car effectively (Buick Custom LeSabre 2005). Be warned though, the video shows an older Buick pre-2003. In the "newer" Buicks like mine, the whole engine is about 6 inches further into the car frame.
This means I had to buy a 3/8" swivel for my ratchet set in order to reach the O2 Sensor with a tool. It is doable on the newer Buicks, you just need an extra piece. Swivels can be bought at a typical hardware store for around $15.
+Brady Fish Thanks for the feedback!
I know it’s been a while but if anyone’s curious about how to do this without a swivel, attach your socket with the wrench on (I used a 3/8) angle it so the handle is sticking out left, wrap a small rope around the handle and pull backwards while holding down the ratchet. I heard it pop and I could unscrew it with my hand
I needed this! Thanks! Saved me $300
+Kenny205 Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com:
1aau.to/m/Shop-1AAuto-c
Got the socket and sensor from your site & video really helped 🤟noticed a big difference right away
In a 2002 lasabre theres more of a angle and the metal and heater core tube is in the way you have to have the exact right extension boy do they make it look easy
Thanks for this video guys. It helps me. I bought your O2 Sensor listed at 1AAuto and looks to be the right part. The sockets you have posted to the description do not have the cut away needed to take off the O2 Sensor though right?
+Brady Fish Thanks for your order! That is correct, if you need the specialty socket to install and remove the old sensor please check out this link: www.1aauto.com/7-8-in-3-8-in.-drive-oxygen-sensor-install-socket/i/1aast00001
Really appreciate your videos 😁🙏❤️
Does this take 5 mins?
I have an 03 buick lesabre most likely has the original o2 sensors in it.
Do you have any pointers on getting it out? I need to replace both o2 sensors and the cat intermidate pipe and muffler?
Any tips are helpfull,,,
You could try to spray a little penetrating oil on them such as PB Blaster. It may make it a little easier to remove them. 1aauto.com 888-844-3393
Thanks so much for the great videos!
Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +sue cook
lol No wonder why I couldn't find it underneath! Thanks!!
+Chas Gantz Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Soooo like I know this was 9 years ago but I'm just coming across this now, lol 😅 is this the same location for a 1995 Buick LeSabre as well?
Are both O2 sensors the same? Up stream/downstream?
I have a 2004 lesabre struggling to find a difference in sensor, just different manufacturers.
Great job very helpful Thanks
You have this video for 2010-2014 lacrosse? Not sure how to get to it
Do you change it when the muffler is hot or cold?
Hey gd afternoon.. Do you have any videos on replacing the fuel tank pressure sensor on a 2000 buick lesabre??
+Rayvon Mccarroll We don't have a video for that specific model, however, the steps will be similar to this video: th-cam.com/video/LLxPfeAGL3U/w-d-xo.html 1aauto.com
my lights on the dash board dont flicker on and off ..it starts up good but after i drive it for a few blocks and when i put it in park it kind of idles up on Rpm's like if im stepping on the accelerator when its running and i have it in park..
Is this the same process for the bank 1 sensor 1 o2 sensor on the 2004 Buick lesabre?
+Jeremy Suls We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
I got a 2001 buick lesabre and i cant even find the 02 sensor in the location yours is in, I have so many wires i cant even feel for it
On my 93 Buick Park Ave 3800 there is enough room to get it off with a wrench. I have done so before.
Is the o2 bank 1 sensor 2 the same as the bank 1 sensor 1 for a 2000 Buick Regal GS Supercharged?
+Erick L Thanks for checking us out! Yes, these should be the same upstream sensor used in both locations. 1aauto.com
I broke two 3/8 wrenches trying ti do this and broke the o2 sensor 😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
what else do you recommend i use if i don't have a pipe
A bfh.
Anyone know how many o2 sensors a Buick Park Avenue Ultra has?
Should I need to move my engine or anything else to get to the sensor? I have a 2000 buick lesabre.
+Robby Hatch You shouldn't have to. We currently do not have an auto repair video on this particular year make and model. 1aauto.com
1A Auto Parts do you recommend coming in from the top or underneath for this model?
Thank you very much for your help!
How many O2 sensors does a 2000 Buick LeSabre have?
Did you ever find out how many is on the 2000 Buick lesabre?
I want to do this repair for my daughter's 1997 Firebird that we want to sell. The diagnostic tester indicated the heater 02, Bank 1 Sensor 1. I'm wondering how do I know which sensor should be changed.
HI Don, It should be the upstream sensor (before the catalytic converter). Here's a link to the O2 sensors that we carry on our website for her Firebird if you need one. We offer FREE SHIPPING on all orders in the lower 48 states. Hope this helps you out. www.1aauto.com/1A/oxygen-sensors/Pontiac/Firebird/-/-/1997?VideoReply&TH-cam&ATony
1A Auto Parts
Thanks for the quick reply and your help.
Hello 👋
You forgot the anti-seize
Kent Brian nope already comes on the threads
they were charging me 85 dollars ,now i can save that towards my car for other parts
Hello does this car have two o2 sensor ?
+howtocustomcosplay - collectors league 4 Yes, they would be in the exhaust pipe. 1aauto.com
+1A Auto Parts thank you
Could you just cut the old wire on the broken sensor so you can just use a normal socket since the old sensor is trash?
Thank you for watching. Yes you can cut the wire then use a Deep socket. That trick is useful if the sensor is seized because you can use a 6 point socket and it will have a stronger grab on the sensor.
1aauto.com 888-844-3393
The how do you get the new sensor on? You will still need the o2 socket
What about putting on the anti seize to the threads... Video is too fast... Slow down ...
I was just gonna comment that. Good catch.
The new one comes with anti seize already on it
Why don't you say how the car will run when it needs this done
Joe Rico the check engine light will come on and you’re gas mileage will get worse