I love our Launch Scan Pad we have at work. Makes finding ABS wheel speed sensor problems easy. You can graph each sensor then lay each graph on top of each other. Makes seeing differences in wheel speed easy.
I bought a ThinkCar Mini 2 as a DIYer. At it's price point, it is amazing. Software must be the same as your Launch because watching your screens and menus, mine looks just like yours. Mine is bluetooth, which is great. And, talking about programing key fobs, my Mini2 programmed new fob for my 1996 Jeep GC. I couldn't find a Jeep dealer or a locksmith that could do it. I could never find a shop or person that had the factory DRB to do it either. Amazing what the offshore aftermarket manufacturers can do. Good video, thanks.
I have several scanners, but my go to is the Thinktool ProS. It’s the same launch software and the capabilities are as good or better than my snap on or autel, and for around $1300, you can’t beat it.
Same here but if I could do it again I would have gotten the next model up from that which is only a few hundred more...i had to turn down a job on a 16 e series Mercedes that needed a new headlight assembly coded and the proS won't do coding other than pcm/tcm and injectors and such...the next model up would have coded the headlamps, my autel 906 and snap on verus couldn't do it
This scan tool will program transponder keys. I have the mobile model scan tool and i can verify it will do it. I think it's a decent scan tool, so far it's done everything i need it to do, but will not flash ECU's/ECM's/PCM's... whatever you wanna call it. It can pull body module codes too, which i think is a must to have with today's vehicles. Only difference between yours and the one i have, is the screen size, but the software still has the same bidirectional options. It's like comparing a phone to a tablet, they still do the same things.
I like my little Topdon ArtiDiag800 BT. About the same price but uses a Bluetooth dongle to connect and free lifetime updates. It is NOT bi-directional but it does have 28 service functions and resets. I have other tools if I need to go deeper.
Thank you, Thank you Ken. I have a stumble in my truck and replacing the Mass Air flow sensor did not fix it. I went by the Blue Driver info. You're right, the cheap scanners have their place. But I need something to check the injectors, misfire, and the throttle body data. You are great Tech and again thank you. I probably will buy this to help me figure out what's wrong with my POS Ford lol.
Thanks for giving us a live visual of the scanner in action. It does seem to do a lot of functions? The speed or loading times are usually faster the more dough you spend, but for a home scanner, I would love to have that? I have a Actron live data unit, but no way to actually figure out, which of the 13 DTC's on my car, are all generic in nature and no Bi-directional functions to test components properly? I may just have to get me one, to at least fix my own car, and having the ability to fix others as well? Thanks again, Kenny.
I was beside myself…airbag code on my ‘07 Subaru Tribeca. Did everything I could do without a Subaru SSM. Dealer wanted $175 to plug it in. Hmm. Found the XTool D7 on Amazon. Literature said it covered Subaru. Really? I wrote to them thru Amazon and a lady responded within a day, assuring me that their engineers guaranteed it would work. And, it was going to offered on one of those “flash” sales for $75 off in a day or two. $300 and it told me the exact component that had faulted! Very fast loading. Free updates for all makes and models for 3-years. Customer support is in China, but they answer as soon as they wake up after you write. I don’t know $#i+ but this thing has been amazing with every vehicle I’ve used it on.
what's the D7 have to do with the x431 review? I've seen a lot of people hate on the xtools, lock ups, error pops when trying to write to vehicle, not supporting as many cars, etc.
Geez, I’m reading my comment and wondering the same thing. I guess I was just…heck I don’t know what I was doing. Certainly wasn’t trying to step on Kenny.
On record test, with the engine cold and off, check to see if the CTS is similar to the outside temperature. If not, the CTS is bad. If the CTS thinks it's freezing when it's actually 88°, the mixture can be rich. That'll affect fuel trims.
I think the 6 pin is used on the 2018 and later gateway port due to the TH-cam channel that hacked into a Jeep over vehicle internet connection. I have the xtool due to the quick scanning on my Toyota hybrid system. Ability to program keys pays for itself.
@@dans_Learning_Curve I know with mine I can do all the actuation feature on wife 2004 ram and my Prius but need to tap into a gateway port supposably located on right firewall on my company 2019caravan haven't ordered adapter yet but looks a lot like the jeep hook up for my old snap on brick for the obd 1
You do need to purchase add ons for certain applications. Unfortunately, I don't know if that is one off the top of my head. You may find the info somewhere in the Amazon listing. Sorry I couldn't be of more help. Keep wrenching 🔧
Good demonstration of what the launch can do. But what do you recommend for older vehicles such as a 94 Dodge Ram 2500 or a 63 Dodge C700 or a 55 Chrysler New Yorker Deluxe St Regis
This looks like a good scanner, Does it access mode 6 data? I have an 02 Ranger 4.0 that seems to be missing around 3200 RPM no fault codes or pending codes
Good question. I will assume it does , but I'll verify it for you . If you could , email me at wrenchingwithkenny@gmail.com so I have your email, Otherwise the message may get lost on my end
I just bought a Thinktool Pro Platinum & it's great & will do a shit load more than an X431 although I I do have an X431 Pro 5 & an Autel MK808 but again the Thinktool walks all over them, anyway Ken G'day from from OZ been a mechanic & electronics tech for over 40yrs.
Need to tell viewers to ring that pesky bell to get notifications. Many people don't know and think that they'll be notified with just a subscription.... Sure wish TH-cam would have notifications on by default when someone subscribes. 🤔
hi Mr Kenny i have a snapon modis ultra and a autel elite on different cars they can swap at which one is faster ford snapon faster on vw autel is faster there is no one after market good multi car make scan tool pick your poison or poisons unless you work on one brand then factory tool is the way to go KEEP WRENCHING PS DONT FORGET TO LET VEIWERS KNOW SUBSCRIPTION IS FREE
I love our Launch Scan Pad we have at work. Makes finding ABS wheel speed sensor problems easy. You can graph each sensor then lay each graph on top of each other. Makes seeing differences in wheel speed easy.
I bought a ThinkCar Mini 2 as a DIYer. At it's price point, it is amazing. Software must be the same as your Launch because watching your screens and menus, mine looks just like yours. Mine is bluetooth, which is great. And, talking about programing key fobs, my Mini2 programmed new fob for my 1996 Jeep GC. I couldn't find a Jeep dealer or a locksmith that could do it. I could never find a shop or person that had the factory DRB to do it either. Amazing what the offshore aftermarket manufacturers can do. Good video, thanks.
Thinktool and Topdon software was written by Launch. Thinktool updates ruined mine. So do not update Thinktool.
Awesome Scanner, and at a decent price point, too! Easy on the wallet, for many folks. Another interesting clip, Kenny! Thanks! 👍🦾👏👏👏
👍
Thanks for the video Kenny great info on the scanner. Take care of yourself and family and be Blessed and have a great Easter day ❤️❤️❤️.
I have several scanners, but my go to is the Thinktool ProS. It’s the same launch software and the capabilities are as good or better than my snap on or autel, and for around $1300, you can’t beat it.
Same here but if I could do it again I would have gotten the next model up from that which is only a few hundred more...i had to turn down a job on a 16 e series Mercedes that needed a new headlight assembly coded and the proS won't do coding other than pcm/tcm and injectors and such...the next model up would have coded the headlamps, my autel 906 and snap on verus couldn't do it
Great job explaining Functionality of this Scanner
"before do it" reminded me of a lady at a chinese restaurant explaining to the laundry man that "towel broken" (torn) lol! Great video!
I bought a launch X431 diagun IV and have successfully programed keys for my 2003 lexus
Lightning Deal for $372 right now on this scanner
I have an 03 Ram and it can program new or extra fobs without a scanner.
BTW, you need to wash that nice motorhome!
Thanks for reviewing this scanner, really want one. All the things,resets it can do.😎☮️✌️
This scan tool will program transponder keys. I have the mobile model scan tool and i can verify it will do it. I think it's a decent scan tool, so far it's done everything i need it to do, but will not flash ECU's/ECM's/PCM's... whatever you wanna call it. It can pull body module codes too, which i think is a must to have with today's vehicles. Only difference between yours and the one i have, is the screen size, but the software still has the same bidirectional options. It's like comparing a phone to a tablet, they still do the same things.
I like my little Topdon ArtiDiag800 BT. About the same price but uses a Bluetooth dongle to connect and free lifetime updates. It is NOT bi-directional but it does have 28 service functions and resets. I have other tools if I need to go deeper.
theres a door kit you can buy that can be replaced through the blower motor w/o pulling the dash
The parking light output circuit open sounds like an open filament, lamp change perhaps.
Thank you, Thank you Ken. I have a stumble in my truck and replacing the Mass Air flow sensor did not fix it. I went by the Blue Driver info. You're right, the cheap scanners have their place. But I need something to check the injectors, misfire, and the throttle body data. You are great Tech and again thank you. I probably will buy this to help me figure out what's wrong with my POS Ford lol.
Dear sir, Lightning Deal for $372 right now on this scanner
@@kingbolen_official That's what I got it for.
I think rather than a longer cord a blue tooth would be better so you can carry it under the hood if you need too.
blutooth is awesome but if the battery goes bad in unit and you cant connect by cable it sucks
They released a blue tooth version. Makes me go Hmmm…
"..yeah i gotta shave too..." i felt that on a personal level 😆
😂😂😂 thanks for watching 🔧
Thanks for giving us a live visual of the scanner in action. It does seem to do a lot of functions? The speed or loading times are usually faster the more dough you spend, but for a home scanner, I would love to have that? I have a Actron live data unit, but no way to actually figure out, which of the 13 DTC's on my car, are all generic in nature and no Bi-directional functions to test components properly? I may just have to get me one, to at least fix my own car, and having the ability to fix others as well? Thanks again, Kenny.
The CRP919E have bidirectional test features.
I was beside myself…airbag code on my ‘07 Subaru Tribeca. Did everything I could do without a Subaru SSM. Dealer wanted $175 to plug it in. Hmm. Found the XTool D7 on Amazon. Literature said it covered Subaru. Really? I wrote to them thru Amazon and a lady responded within a day, assuring me that their engineers guaranteed it would work. And, it was going to offered on one of those “flash” sales for $75 off in a day or two. $300 and it told me the exact component that had faulted! Very fast loading. Free updates for all makes and models for 3-years. Customer support is in China, but they answer as soon as they wake up after you write. I don’t know $#i+ but this thing has been amazing with every vehicle I’ve used it on.
what's the D7 have to do with the x431 review? I've seen a lot of people hate on the xtools, lock ups, error pops when trying to write to vehicle, not supporting as many cars, etc.
Geez, I’m reading my comment and wondering the same thing. I guess I was just…heck I don’t know what I was doing. Certainly wasn’t trying to step on Kenny.
does it have support for the 2006 Pontiac torrent? alot do not ucanic does not and its a 1,000 bucks and nada coverage bud good vid thou
On record test, with the engine cold and off, check to see if the CTS is similar to the outside temperature. If not, the CTS is bad. If the CTS thinks it's freezing when it's actually 88°, the mixture can be rich. That'll affect fuel trims.
i always use a break out box for an extension plus it tells me right away for grounds and power at obd plug
I think the 6 pin is used on the 2018 and later gateway port due to the TH-cam channel that hacked into a Jeep over vehicle internet connection. I have the xtool due to the quick scanning on my Toyota hybrid system. Ability to program keys pays for itself.
Do tell more!
@@dans_Learning_Curve I know with mine I can do all the actuation feature on wife 2004 ram and my Prius but need to tap into a gateway port supposably located on right firewall on my company 2019caravan haven't ordered adapter yet but looks a lot like the jeep hook up for my old snap on brick for the obd 1
@@DavidLeslie65 I have the red brick!
Thanks Kenny, great video! Does anyone know the capabilities with TPMS sensors with this unit? Do you need to purchase another add on? Thanks 🇺🇸
You do need to purchase add ons for certain applications. Unfortunately, I don't know if that is one off the top of my head. You may find the info somewhere in the Amazon listing. Sorry I couldn't be of more help. Keep wrenching 🔧
Santa is that you 😮
Can it program keys, and retract emergency brake motor on the caliper, diesel regeneration, code diesel injectors
Hello sir, if you can tell us your car model& year, we can check for you whether the scanner is supported or not.
Great review!
Good demonstration of what the launch can do. But what do you recommend for older vehicles such as a 94 Dodge Ram 2500 or a 63 Dodge C700 or a 55 Chrysler New Yorker Deluxe St Regis
I have a 05 2500 with the diesel, and have the same wiper problem. I will be waiting to see what you find out about it.
Which launch code reader is that and is it blue tooth or hard wired to the ibd2 port? Oh my bad us see it's in ur description, thanks for adding it .
This version have the OBD2 cable, But we will have Bluetooth version in near future.
@kingbolen_official I heard that being hard wired to the obd2 port the reader works better or faster anyways
New toys are always a ton of fun. $600 Launch vs. 10 Kazillion dollar snap on.
Tempted to get this. I have an Innova RS3100, which is decent, but II need something with a bit more options.
Hurry up！ Lightning Deal for $372 right now on this scanner
love the grammar Before do it
This looks like a good scanner, Does it access mode 6 data? I have an 02 Ranger 4.0 that seems to be missing around 3200 RPM no fault codes or pending codes
they have one now for $199 that is wireless that does all that as well
I have a question can it work on light 24volt trucks?
I would also like to know how it works on a Dodge diesel from 2005.
Do you know if this scanner can do power balance on 2013 f-150 also wondering if it can read miss fire data live
Hi Kenny dos this scanner show misfire data.
Good question. I will assume it does , but I'll verify it for you . If you could , email me at wrenchingwithkenny@gmail.com so I have your email,
Otherwise the message may get lost on my end
Dear sir, The scanner shows misfire data.
I dont understand the tmps i press tmps but says scanning bt but i dont have the Bluetooth version
Does it do ABS brake bleed?
of course, the Launch CRP919E can do that.
How do you get to the misfire. Had this thing 4 months and can't get to it. Frustrating
Cut the case so you can leave the connector on.
How much do they cost
Lightning Deal for $372 right now on this scanner
@@kingbolen_official and what all will do
I have software available for rolling back odometers if your interested in adding that to your services?
Thievin' car flipper
"It's decent". Not great, not terrible.
WHAT
No
" What are we working on now"???
It would be faster if you had the wifi connected
I wonder if it'd scan a 95 Toyota T100?
That would be OBD1, don't think any new scanners will do anything but OBD2?
Dear sir, This scanner is capable of supporting your vehicle if you have an adapter.
I just bought a Thinktool Pro Platinum & it's great & will do a shit load more than an X431 although I I do have an X431 Pro 5 & an Autel MK808 but again the Thinktool walks all over them, anyway Ken G'day from from OZ been a mechanic & electronics tech for over 40yrs.
pro Platinum is $3200... I would hope it does more than a $465 scan tool
@@tomday8352 I got mine for AU$2200 & yeah it does do a shitload more, it's a great scantool especially for the price I paid.
Mine didn't want to clear code P0430
This model is newer than the 919x
Need to tell viewers to ring that pesky bell to get notifications. Many people don't know and think that they'll be notified with just a subscription.... Sure wish TH-cam would have notifications on by default when someone subscribes. 🤔
Nut'n wrong with looking homeless.. 🤣
🤣🤣🤣🤣
hi Mr Kenny i have a snapon modis ultra and a autel elite on different cars they can swap at which one is faster ford snapon faster on vw autel is faster there is no one after market good multi car make scan tool pick your poison or poisons unless you work on one brand then factory tool is the way to go KEEP WRENCHING PS DONT FORGET TO LET VEIWERS KNOW SUBSCRIPTION IS FREE
Hahaha maybe