Why this is EMMC Problem? not The CPU nor the IC Power Issue? I am a beginner in mobile phone repair, but this issue has identically identified and done.
First thank you so much ❤ I learnt from U if gage power supply on 0.1-0.6 that means the problem on emmc to be sure from that we connect test point and during phone connected with pc if I find port 9008 or mediateck or usb1.0 Huawei...I will conclude the cpu and power circuit work good...is this correct? my English is weak please tell me by replying to me
Hi brother. I have samsung a5 2017 (SM-A520F). The phone is stuck in downloading mode, it says ( Downloading.... Do not turn off target). And im trying to fix it with flashed using Odin, But its always fail. And get notice in odin like "Repartition operation failed". I tried many time but getting that problem. Did you know what the issues? Thats doesnt get problem with the Emmc? Or what Please help me
Hi bro. Emmc lifetime issue causes some failures, etc. stuck logo, keep restarting, lagging, and dead. If you have tried to flash but it failed, thats 99% needs emmc chip peplacement or repartition. But repartition will not last long, in some cases it last only 3 days usage. So replacement is better. The Replacement of emmc is so much technical, you can't do on your own unless you have the tool and the emmc programmer box.
sir my old samsung note phone shown kernel problem msg at start and no working ..so i tried to install frimware using odin.........but it stuck and stopped during step of chash memory....and stopped in download mode....then i also try to do that again...but a blur download mode screen came and dissapeear....now my phone is only black screen no download mod no kernel msg.....no start ...is it emcc problem or cpu or other problem?
Try the next step, flashing using 'Muslim odin' it's more powerful than any other flasher software. If the problem persist happen, maybe your internal memory is weak and need replacement.
Hi friend very well video. I have a cell xiaomi redmi 5 that when you power on it goes 125ma then it stay or stuck sometimes 65ma others 43ma. I have check all voltages pmic and are fine only miss a 0.8volts that goes to cpu. But not exactly know if it goes later activated for RF or modem. Also have to check this of your video or check if i have comunication cpu emmc with osciloscope tomorrow. What do you think?? Emmc!!!
@@edgaralbo6433 open the phone cover, remove the battery and then connect it to the computer, and see the status on the Device Manager window on your computer screen.
@@nuhacell9970 the status Is like an error. That the computer see It buy as of It were driver problem.if the emmc or with the emmc It Is Always the same. For me Is the emmc. Tell me something. Doesn't worth buying a new emmc.? I have to reprogram the emmc putting the rom or software inside.
Nice explanation based on your experience i have the same symptoms on a samsung device when powered on or removed from charger it's stuck on 100mA and nothing shows on screen it takes 0.6A on charge but before was taking 1.6A. It's a water damaged device it was showing a warning message for overheating issue and the recent/return buttons don't work either i am glad that i saved the whole data off of it when i had the chance to boot it after i removed some thermistor off the board but now it's just dead, so is the warning message for overheating was due to the emmc itself and does a dead emmc prevent the phone from starting? (someone told me if the emmc is dead it will show a green screen when the phone turns on) also i sprayed the board with lighter gas to freeze it and powered it on and the emmc showed up with heat starting from upper side corner, i may try a reflow as a last attempt
It happens because when the phone is over heat, the CPU is slightly disconnect some pins because the CPU is attached with glue which can make it loosing easily.
If i take off eMMC from Motorola one vision and solder it to exactly same model Motorola One vision. Wil the eMMC with existing data work on new Motorola one vision?
I never done that, so I am not sure it wil work or not, but it is worth it to give it a try. However, It depends on the model as well. May be it will work o mediatek chipset.
@@nuhacell9970 thanks for replying. I don’t know what mediatek chip set is. I’m just trying to rescue my data by buying exactly same model Motorola one Vision and to put my water damaged phones eMMC on this new working One Vision. I watched a ton of videos how to transfer the eMMC, but no one can answer if the eMMC will work on the new phone/motherboard.
@@nuhacell9970 Im not a technician at all. Never done it before. But so far i bought: - multimeter - solder station - solder iron - flux - desoldering iron - Same model phone - 99.9% alcohol - a new battery to replace the old one - a phone repair set
![[UNCUT] ชาวบ้านถาม “นายกอุ๊งอิ๊งค์” ประชาชนมีกิน มีใช้ กี่โมง? I คนดังนั่งเคลียร์ I 16 ส.ค. 67](http://i.ytimg.com/vi/tKZvOzLIJJc/mqdefault.jpg)
Thank you so much for sharing your knowledge and experiences with us. In English especially. Great video
Nice ane clearly get the point. Your English is also well understood. Keep up the great work.
Thanks for the English learning most Indian Tech not speak English
Thank you, hope it useful. I am Indonesian.
Thanks so much brother upload more videos please
Wow,I have learnt a lot today, I am very grateful.
Thanks bro
Thanks here in Uganda
Super explained. Make other videos like cpu, power and network also. how can identify problems
This is the best tutorial so far
Thank you. Hope it will be useful for you.
Atlast i found english repairing video.
I am stuck with hindi language cause i live in india.
That's great
@@nuhacell9970what about, connect and disconnect loop problem?
@@dr.mobilefree-knowledge5968 What mobile phone sir? And what's the problem of the phone?
Wow... I like your video... I am a new subscriber... I like it bcoz it is in English... God bless u sir
Excellent work thanks for sharing your knowledge
Thanks. Exactly informative.
good information
Thanks brother
Very informative thanks.. keep sharing
your learn is very good ❤
Thanks bro
God bless you very good video
Thank you very much for your lesson. from GHANA.. kEEP IT UP
You're welcome. Good luck to you.
Great lesson 👌👌👌, thank you so much 🥳🥳🥳
You’re welcome 😊
Well, I see . Clear enough to understand the issue.
Best point
i love your video sir clearly understood
Thank you sir
Thank u sir❤❤❤
Most welcome brother
Nice video bro ❤
Thank bro.
First thank you so much ❤
I learnt from U if gage power supply on 0.1-0.6 that means the problem on emmc to be sure from that we connect test point and during phone connected with pc if I find port 9008 or mediateck or usb1.0 Huawei...I will conclude the cpu and power circuit work good...is this correct? my English is weak please tell me by replying to me
99.99% true.
Thank you so much😊
We wait more
@@Alaa.891 my pleasure, good luck.
Shop location?
Indonesia sir
Helpful ❤
Okay it seems easy method but need much learning and experience yeah
Appreciate your work. Can you guide me about a phone,👍
Sure. Thanks.
Nice video sir learnt alot..please i have an isssue when you press power it reads 0.007 when you release power it returns to 0.000 please help
What type of phone? Have you checked it correctly with the correct battery connection?
@@nuhacell9970 infinix x627
I wish all these videos were in English
Thank you Sir
Hi brother. I have samsung a5 2017 (SM-A520F).
The phone is stuck in downloading mode, it says ( Downloading.... Do not turn off target).
And im trying to fix it with flashed using Odin, But its always fail. And get notice in odin like "Repartition operation failed". I tried many time but getting that problem.
Did you know what the issues? Thats doesnt get problem with the Emmc? Or what
Please help me
Hi bro. Emmc lifetime issue causes some failures, etc. stuck logo, keep restarting, lagging, and dead. If you have tried to flash but it failed, thats 99% needs emmc chip peplacement or repartition. But repartition will not last long, in some cases it last only 3 days usage. So replacement is better. The Replacement of emmc is so much technical, you can't do on your own unless you have the tool and the emmc programmer box.
What about EDL(Flash mode) disconnect after 1 second but fastboot doesn't have problem
Might be bad connection. Make sure it has firm connection for each socket. What type of phone btw ?
Ngopi dulu bang😂☕
Ashiap suhu
sir my old samsung note phone shown kernel problem msg at start and no working ..so i tried to install frimware using odin.........but it stuck and stopped during step of chash memory....and stopped in download mode....then i also try to do that again...but a blur download mode screen came and dissapeear....now my phone is only black screen no download mod no kernel msg.....no start ...is it emcc problem or cpu or other problem?
Try the next step, flashing using 'Muslim odin' it's more powerful than any other flasher software. If the problem persist happen, maybe your internal memory is weak and need replacement.
My question is no functions the power supply we connect the phone dead.what the problem
To analyse the symptoms of dead phone.
Sir plz don't smoke
Thanks brother. Just stopped smoking. Been running for about a month. I hope I will be able to stop smoking.
Alhamdulillah. I just stopped smoking after your 2 years comment.
Hi friend very well video. I have a cell xiaomi redmi 5 that when you power on it goes 125ma then it stay or stuck sometimes 65ma others 43ma. I have check all voltages pmic and are fine only miss a 0.8volts that goes to cpu. But not exactly know if it goes later activated for RF or modem. Also have to check this of your video or check if i have comunication cpu emmc with osciloscope tomorrow. What do you think?? Emmc!!!
Hi. Thanks.
So the phone is dead? Try to connect it to the computer without battery, then tell me what happens. Have a great day.
@@nuhacell9970
It Is reconize by the computer. Connect disconect on computer
@@edgaralbo6433 open the phone cover, remove the battery and then connect it to the computer, and see the status on the Device Manager window on your computer screen.
@@nuhacell9970 the status Is like an error. That the computer see It buy as of It were driver problem.if the emmc or with the emmc It Is Always the same. For me Is the emmc. Tell me something. Doesn't worth buying a new emmc.? I have to reprogram the emmc putting the rom or software inside.
@@edgaralbo6433 have you installed the Qualcomm driver on your computer?
How to conferm where in fault in pmic or cpu
Have a deep look at how the needle of the power supply surges.
thanks for qul.. what about mtk brother?
For MTK it will show mediatek USB on Device Manager
Nice explanation based on your experience i have the same symptoms on a samsung device when powered on or removed from charger it's stuck on 100mA and nothing shows on screen it takes 0.6A on charge but before was taking 1.6A. It's a water damaged device it was showing a warning message for overheating issue and the recent/return buttons don't work either i am glad that i saved the whole data off of it when i had the chance to boot it after i removed some thermistor off the board but now it's just dead, so is the warning message for overheating was due to the emmc itself and does a dead emmc prevent the phone from starting? (someone told me if the emmc is dead it will show a green screen when the phone turns on) also i sprayed the board with lighter gas to freeze it and powered it on and the emmc showed up with heat starting from upper side corner, i may try a reflow as a last attempt
Green screen in samsung mostly caused by CPU, you just need to reball the CPU.
It happens because when the phone is over heat, the CPU is slightly disconnect some pins because the CPU is attached with glue which can make it loosing easily.
How about cpu problem analys masteee😁🙏
Press the power button and see the surge, it normally stop at 0.8-1 ampere.
Hello boss can we chart private on this tutorial
Yes, of course
How will you reach me?
If i take off eMMC from Motorola one vision and solder it to exactly same model Motorola One vision. Wil the eMMC with existing data work on new Motorola one vision?
I never done that, so I am not sure it wil work or not, but it is worth it to give it a try. However, It depends on the model as well. May be it will work o mediatek chipset.
You will never know the result until you try it.
@@nuhacell9970 thanks for replying.
I don’t know what mediatek chip set is. I’m just trying to rescue my data by buying exactly same model Motorola one Vision and to put my water damaged phones eMMC on this new working One Vision. I watched a ton of videos how to transfer the eMMC, but no one can answer if the eMMC will work on the new phone/motherboard.
@@lafriguisara8014Emmc working is technically done by a technician. Are you one of those?
@@nuhacell9970
Im not a technician at all. Never done it before.
But so far i bought:
- multimeter
- solder station
- solder iron
- flux
- desoldering iron
- Same model phone
- 99.9% alcohol
- a new battery to replace the old one
- a phone repair set
You have soms bugs there men
Yes there are some bugs here.
@@nuhacell9970 i sent you message in the comment. Have you read M.
brother need little speed
Thank you brother, you can use play speed feature on your screen. Sorry for the inconvenience