Chad, before you button up the truck bed here is a possible idea for you. I don't know where you are planning on putting the fuel tank, but it looks like you have an opportunity to add a secrete storage area under the bed just behind the cab. Have done plenty of El Camino beds that way by adding a hinge on front bed panel. Looks like you have enough room to make a box big enough to carry a floor jack, toolbox & cables, something every shop truck should have. Just something to think about........ Scott from the high desert, just down the road from Gene W.
That old seat frame will work just fine whit a little bit of finishing off, good thinking on it chad,,with pading on the seat an the back it will sit about right,,I think it will work out just fine,,I had to laugh out loud with you an Jolene when you sat inside the truck with no cousin,,😂😂😂,, luv you two,,👍👍😀
Really enjoying the pick up truck . So sorry that you are going to stop working on this creation. I would love to see you continue on this build for awhile longer !
I have been watching your show for quite some time so instead of buying some metal brackets, I decided to make them. I worked with metal years ago building airboats and swamp buggies and have the tools I need but haven't worked with them in years. Your skills make things look so easy but mine leave a lot to be desired. I made the brackets. You could have made them in about a hour. It took me most of the day! Your skill with tools made the difference. I had to do and redo them several times.
No where else have I seen a four-door car go in the shop as a four door and eventually drive out as a very nice pick - up truck . Looks AWSOME you guys !!
This truck build is a beauty and I would love love love to have something like this. Bad Chad and Jolene you did a beautiful job and God bless you. 🙏❤️✌🏼😎🥂
Awesome Bad Chad!!. I've been laid up since August and look so forward to your show each and every day. It's keeping me from going completely bat shit crazy. You and Queen Jolene do an amazing job together. The truck is amazing also. Thank you folks very much for the opportunity to watch you and learn so much! God bless and catch you tomorrow 🙏
This truck keep's getting better day by day. It could be an awful same not to see it come to fruition. you and the viewers have had a lot of fun watching this one and it is so precise it looks factory built. Doing a tremendous job and everything has been going so smooothlly, Would love to see il finished. 🎆👍👍
Looking at this truck chad,it looks like it just rolled off the production line.. superb great fabrication and hard work chad 👍 Jolene thanks for your excellent filming and showing us the process etc . Hi Final
Every time I hear you say" thanks for coming back everyone" it reminds me to hit the like button. Thank you for your time and effert in teaching us your skills.
This was me and my wife’s favorite episode in awhile. It was fun to laugh with you both and see the love, but fun you two have with each other. I know it is a car show, but you two also lead with communication, compassion and respect for each other. What a breath of fresh air. Keep up the great work you are appreciated in Oklahoma!
These kind of trucks, rock ! Any 30's truck like this, is perfect for someone just retireded ! Keep it clean, and criuse up to the hardware-store...! 👍🏻
Maybe a split seat that flips the but part up for underneath storage box and so you can get to the battery box easily. Just an idea. Even if you put seat slide guides for behind the seat storage and adjustment. Definetly lift the seat. Think armrest/ window height like in you daily driver pickup. Jolene needs to be able to see over the long hood and see out mirrors.
Chad looks like a ten year old boy sitting in that truck!!! I almost pissed my pants from laughing so hard!!! That's why I love this guy, he cracks everyone up!! Thanks for that, I needed someone to lift my spirits!!!
You looked like a little old man with just the cushion on the seat it was so funny that seat is perfect for the truck you guys are amazing fan from Alabama
Hi Chad and Jolene A idea with the seat, you could make the area between the floor of the seat frame and the plywood base of the seat to store your emergency recovery equipment, like bottle Jack's, jumper cables, wheel brace for the wheel nuts, a first-aid kit, fire extinguisher, plus direct access to the vehicles battery / batteries. But most of all you Chad and Jolene always come up with a solution to a quandary. Great work on the truck, it is looking great.
This is probably my favorite build that you have done. I still think it would look a little better with those door corners rounded off. I know you found the pic at Jim's with another truck that had sharp corners there but that's why we like what you do, cuz you don't do what everyone else does and you make it different. Plus it would be good content. Regardless, you two are awesome and this is absolutely my favorite build to date. Keep on keeping on \m/ (>
"..... that's why we like what you do, cuz you don't do what everyone else does....." @mikilroy556 ....I agree that is one reason I watch Chad and Jolene. But food for discussion.....Chad found ONE photo of an old truck with the square door corner, right? Have you looked at that same location on the '35-'42 Dodge pickups, or the '37-'42 Plymouth pickups? In both cases, that location is rounded. And I have seen many comments in these videos, wanting that area on this pickup, to be rounded. Well, if the factory look was rounded... and viewers are insisting that it be rounded...if Chad were to round them, how would THAT make his work stand out and be the uniqueness that brings us back to watch his fabrication/build? I'm sure that it probably seems that I am trying to argue. However, I am not. I am simply attempting to provide a counterpoint, for thought and discussion. That's the beauty of automotive customization. We all can see things differently, yet no matter what the idea is, or how it is done, there's always more than a single "right way" for something to look. Or at least I think so.🙂 Merry Christmas!⛄
@@willhorting5317 you're right but I'm just giving an opinion and I never really looked at the other trucks to be honest. In my opinion it just looks a little out of place and I'm not trying to tell Chad how to build his truck.... Just giving my belly button as Chad says lol. Either way the truck is amazing regardless of what he decides to do. I mean it was a four door sedan not that long ago. That's crazy
Trimvthat ply just a bit more and hinge it at fhe rear. That will provide good battery access and a tool box the other side. Nice job, and fitting for the truck; looks right at home in there.
Hi from cold n snowy MB guyys - I have been a car guy for 50 yrs and u never cease to amaze me. This is one of the nicest builds that you have done bro. Sending love and thanks to both of you!
Hi friends!!! Love this build, we watch your show every day!! Jolene does amazing camera work, love the details she captures while things are being cut or welded. Can we get more Fina?! Thanks!! 💜💜💜
I didn't even notice how low the seat was because I was so amazed how well that piece of foam fit. I think that you have one of the best eyecrometers on TH-cam.
Hey Chad, I know it’s hard to read all comments but I wanted to say this build is turning out to be my favorite, so far. I was wondering on the back of the truck are you going to do a roll pan? I look at the side of the truck and it flows so nice to the rear, just thinking about the back of the fender how you would fill that little gap on the side to flow on to the roll pan? Great job now watching your channel more than tv.
On to the interior. This is your best project to date in my opinion. Thanks for having us along!
This truck and Elvis for me!
Comments are never complaints just other conscience never a bad thing just take it or leave it.
@@chrissweet6298 very true!
I love to watch what ever you are doing because you are so positive,you and Julien make my day
For me personally this is the best build I've ever seen I'm a truck guy and never thought this is possible. . Till now . Nice build
That’s so cool how you even found a cool seat pan like that I live in Massachusetts them are long gone it’s so cool to see this
Thanks for the interesting & entertaining videos Chad & Jolene. The truck project is your best one. A Merry Christmas season's greetings to you. 🌲
Bench seat is the right style. Chad will make it work. Jolene is doiong a great job with the videos as always.
Watching every day and love it. Making others happy is a gift you give. All the best, Happy Holiday's everyone!!!
Chad, before you button up the truck bed here is a possible idea for you. I don't know where you are planning on putting the fuel tank, but it looks like you have an opportunity to add a secrete storage area under the bed just behind the cab. Have done plenty of El Camino beds that way by adding a hinge on front bed panel. Looks like you have enough room to make a box big enough to carry a floor jack, toolbox & cables, something every shop truck should have. Just something to think about........ Scott from the high desert, just down the road from Gene W.
I agree, a friend of mine made one in his old Ute for his trade tools because it was a decent size. Loving this build
Under seat way he is fabrication it storage
That old seat frame will work just fine whit a little bit of finishing off, good thinking on it chad,,with pading on the seat an the back it will sit about right,,I think it will work out just fine,,I had to laugh out loud with you an Jolene when you sat inside the truck with no cousin,,😂😂😂,, luv you two,,👍👍😀
Hey man it's time to work on Jolene's car don't you think . I can't wait to see it finished.
You think Chad could use round rod on the seat bottom instead of the plywood ?
Absolutely best project to date ....love to see him laugh and have fun cause life is not always that serious...Great job to the both of you.....
Really enjoying the pick up truck . So sorry that you are going to stop working on this creation. I would love to see you continue on this build for awhile longer !
I'm really enjoying your work, and great ideas.‼️😎👍
Too Blessed to be stressed. God Bless you two. Have a very Merry Christmas. And a Happy Safe New Year.
I have been watching your show for quite some time so instead of buying some metal brackets, I decided to make them. I worked with metal years ago building airboats and swamp buggies and have the tools I need but haven't worked with them in years. Your skills make things look so easy but mine leave a lot to be desired. I made the brackets. You could have made them in about a hour. It took me most of the day! Your skill with tools made the difference. I had to do and redo them several times.
This is some of Chad's best metal fabrication. Great job on this Plymouth truck.
I am really liking the way the truck is going, you are an artist in my opinion. Can't wait to see it finished keep up the great work.
No where else have I seen a four-door car go in the shop as a four door and eventually drive out as a very nice pick - up truck . Looks AWSOME you guys !!
looking good!!! Love the use of shop material, very creative!!!!
I think this seat is perfect! You add the foam pad and it will be real close to being spot on!
I love this truck more and more every day, awesome job, both of you. 😀
This truck build is a beauty and I would love love love to have something like this. Bad Chad and Jolene you did a beautiful job and God bless you. 🙏❤️✌🏼😎🥂
One of my favourite builds so far! Hope to see you go to day 60 with this one
That seat bit had me dying
That was a great video, the seat fits like a glove
Bob Ross painting happy little clouds,Chad andJolene building a happy little truck! Beautiful guys just simply beautiful!
LOL that seat with Chad in it makes him look about 10 years old. Made my day, thanks Bad Chad.
I couldn't stop laughing.
😄
Love the truck, You and Jolene are both Blessed.
Looking really good ...awesome stuff Chad & Jolene
This is a great project and on to the interior , thk you Jolene great job filming
To stressed to be blessed🤷😂 I watch your show everyday. Thank you! Keeps me motivated.👍
Haven’t seen the front of the truck in awhile. Its got alot of character. Can’t wait to see it with lights and bumpers
Awesome Bad Chad!!. I've been laid up since August and look so forward to your show each and every day. It's keeping me from going completely bat shit crazy. You and Queen Jolene do an amazing job together. The truck is amazing also. Thank you folks very much for the opportunity to watch you and learn so much! God bless and catch you tomorrow 🙏
I am currently restoring a 1987 Mustang LX. How do you keep your projects from flash rusting? Thanks for teaching me so much.
Chad you and Jolene are one of a kind team love watching you every day merry Christmas!
This truck keep's getting better day by day. It could be an awful same not to see it come to fruition. you and the viewers have had a lot of fun watching this one and it is so precise it looks factory built. Doing a tremendous job and everything has been going so smooothlly, Would love to see il finished. 🎆👍👍
Love the seat style.all smiles.👍👍👍👍👍
Great video of having fun and building on the fly with the stuff you have around, thumbs up
Chad sitting in the truck was hilarious 😂😅..I know what Jolene was laughing about and yes that made my day...👍😁
Made me chuckle.
Enjoy watching your show . You both do a great job.
Looking at this truck chad,it looks like it just rolled off the production line.. superb great fabrication and hard work chad 👍 Jolene thanks for your excellent filming and showing us the process etc . Hi Final
Watching your channel always makes me feel better. I love you guys,awsome every day. Thankyou😊
Every time I hear you say" thanks for coming back everyone" it reminds me to hit the like button. Thank you for your time and effert in teaching us your skills.
Wow! That seat is pretty much perfect for the truck. Looks like it was made for it 👍
This was me and my wife’s favorite episode in awhile. It was fun to laugh with you both and see the love, but fun you two have with each other. I know it is a car show, but you two also lead with communication, compassion and respect for each other. What a breath of fresh air. Keep up the great work you are appreciated in Oklahoma!
Yeah, me too! Happy to see the Chad/Jolene team continuing work on the sedan/truck.
Yeah, you have done a awesome job with the truck. It takes talent to be able to look at the old car and see a truck in it.
Awesome work by awesome people.
Looks like that seat was made for the truck. Another great video!
great seat for truck looks like it was made for it great job.
These kind of trucks, rock !
Any 30's truck like this, is perfect for someone just retireded ! Keep it clean, and criuse up to the hardware-store...! 👍🏻
Bad Chad ur the man The way you do things gives me confidence that I could also do it thanks
That is actually a great seat pan for that truck. It gives you access to the battery and you could have storage under three passenger side
I believe this seat was almost made for the truck. Glad to see this one worked out nice. Nice to see Chad and Jolene laughing while still working.
Too blessed to be stressed, love the motto; I have never heard of it before! Keep up the good work.....
I'm glad the seat works...you're the Mann Chad....let's not forget The Queen
i laughed so much when you sat in it on the foam. you looked 5 yrs old it was brilliant
The seat looks good in the truck thanks for sharing
Maybe a split seat that flips the but part up for underneath storage box and so you can get to the battery box easily. Just an idea. Even if you put seat slide guides for behind the seat storage and adjustment. Definetly lift the seat. Think armrest/ window height like in you daily driver pickup. Jolene needs to be able to see over the long hood and see out mirrors.
Chad looks like a ten year old boy sitting in that truck!!! I almost pissed my pants from laughing so hard!!! That's why I love this guy, he cracks everyone up!! Thanks for that, I needed someone to lift my spirits!!!
Oh my God. I laughed so hard my stomach hurt. Chad sitting in the truck he looked like a little kid in there.
LMFAO
Looks great. Thanks for the hard work you two
The Bob Ross of hot rod 😎. Bad Chad … there are no mistakes just happy little grinder marks 😉
You looked like a little old man with just the cushion on the seat it was so funny that seat is perfect for the truck you guys are amazing fan from Alabama
To help keep the dust down in the shop I have a box fan with a furnace filter taped to the back.
Hi Chad and Jolene
A idea with the seat, you could make the area between the floor of the seat frame and the plywood base of the seat to store your emergency recovery equipment, like bottle Jack's, jumper cables, wheel brace for the wheel nuts, a first-aid kit, fire extinguisher, plus direct access to the vehicles battery / batteries.
But most of all you Chad and Jolene always come up with a solution to a quandary.
Great work on the truck, it is looking great.
Hopefully you will come back to the truck when you're ready to paint and do the finishing touches on it! Awesome, Awesome build! 😁👍
Like everyone else... this is my favorite build to date!
It's a "Cruck", no, it's a "Tar"!? I love it!
Your parts yard has been really good to you the seat was waiting for your truck
Great videos. We can appreciate your honesty and creativity! 👍🏻
you both put a smile on my face thanks guys cheers☺
"Too blessed to be stressed."...I like that!!! You're doing a fine job. 👍
Well done man that's a good looking truck
Loving the channel. Here is wishing you much success. Keep them rolling.
There is not a good end of the day if I don't watch your work . Thank you Chad and Joline. 💝
Awesome work I THINK THE SEAT NEEDS TO COME UP A COUPLE OF INCH'S
Chad, I LMAO when you sat in the truck for the first time 😂😂😂😂! You guys are awesome brother 👏👏👍.
Just coming along great. Perfect seat👍🏻
Jolene can see it. You need to have the seat high enough that you can see out of the back glass and look over the steering wheel.
In my opinion this is the best build yet.
This is probably my favorite build that you have done. I still think it would look a little better with those door corners rounded off. I know you found the pic at Jim's with another truck that had sharp corners there but that's why we like what you do, cuz you don't do what everyone else does and you make it different. Plus it would be good content. Regardless, you two are awesome and this is absolutely my favorite build to date. Keep on keeping on \m/ (>
"..... that's why we like what you do, cuz you don't do what everyone else does....."
@mikilroy556 ....I agree that is one reason I watch Chad and Jolene.
But food for discussion.....Chad found ONE photo of an old truck with the square door corner, right?
Have you looked at that same location on the '35-'42 Dodge pickups, or the '37-'42 Plymouth pickups?
In both cases, that location is rounded.
And I have seen many comments in these videos, wanting that area on this pickup, to be rounded.
Well, if the factory look was rounded... and viewers are insisting that it be rounded...if Chad were to round them, how would THAT make his work stand out and be the uniqueness that brings us back to watch his fabrication/build?
I'm sure that it probably seems that I am trying to argue.
However, I am not.
I am simply attempting to provide a counterpoint, for thought and discussion.
That's the beauty of automotive customization.
We all can see things differently, yet no matter what the idea is, or how it is done, there's always more than a single "right way" for something to look.
Or at least I think so.🙂
Merry Christmas!⛄
@@willhorting5317 you're right but I'm just giving an opinion and I never really looked at the other trucks to be honest. In my opinion it just looks a little out of place and I'm not trying to tell Chad how to build his truck.... Just giving my belly button as Chad says lol. Either way the truck is amazing regardless of what he decides to do. I mean it was a four door sedan not that long ago. That's crazy
@@mikilroy556 I understand.
Maybe I came across a little grumpy? If so, wasn't my intention.
As I said, it was just food for thought.
I had to laugh out loud when Chad was sitting inside. Great stuff!
Trimvthat ply just a bit more and hinge it at fhe rear. That will provide good battery access and a tool box the other side.
Nice job, and fitting for the truck; looks right at home in there.
That is a perfect seat for that Truck,neat idea.
Hi from cold n snowy MB guyys - I have been a car guy for 50 yrs and u never cease to amaze me. This is one of the nicest builds that you have done bro. Sending love and thanks to both of you!
The seat looks like it was made for the truck, WOW
Man, that seat is a great find. Fits the cab perfectly 💥👍
That's a happy little seat...!!! And tomorrow, Chad and Jolene, will do some more happy little odds and ends. 😉
I was cracking up with you guys - lol. Having fun wile you build, right on !
Turned out fantastic 👏 👌 ✨️ 😀
Had a Christmas party , Mist half the show today . The Caruck is looking awesome
Truck is looking amazing. Great work.
Would the slider assemblies raise the seat too much?
That made a gorgeous pickup!!
Real S*** !
Thanks Y'all
👍
I'm a sign painter/installer, for your plywood seat base use a template like you do with metal .
Truly blessed - "too blessed to be stressed". I need to start believing that and reminding myself.
Thanks Chad.
Your work is amazing great job chad👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Hi friends!!! Love this build, we watch your show every day!! Jolene does amazing camera work, love the details she captures while things are being cut or welded. Can we get more Fina?! Thanks!! 💜💜💜
I didn't even notice how low the seat was because I was so amazed how well that piece of foam fit. I think that you have one of the best eyecrometers on TH-cam.
Watching from Yorkshire England,love your work, quality.
Great job you guys are awesome....
Thanks for another day of Bad Chad
Awesome would love to see how to trim out the in side of the cab
Hey Chad, I know it’s hard to read all comments but I wanted to say this build is turning out to be my favorite, so far. I was wondering on the back of the truck are you going to do a roll pan? I look at the side of the truck and it flows so nice to the rear, just thinking about the back of the fender how you would fill that little gap on the side to flow on to the roll pan? Great job now watching your channel more than tv.