Hi Chad & Jolene, how are you two today? This is one time I probably would have gone a different direction and stopped the running board at the back of the cab. Then I would have been able to taper the rear fender front pipes more like the front fender and it would have been easier. As you always say Chad you do you and we can do ourselves. I also am guessing you wanted a more vertical front to the rear fender. You and Jolene are both true artists each in your own way and I love watching both of you work. Chad you are doing a great job on upgrading this older project it is really looking good and when it is finished it will be a true work of art. When you get done with this project it would be great to see paint go on the Bugatti before your next project starts or resumes! I will be back tomorrow as always.
Some times with the amount of muffler pipe you use a muffler pipe bender would be a handy tool in the shop. As far as the fenders I would have liked soft radius curves and a little tip down on the front and the back maybe matching the curves in the cab shape some . Good job anyways Chad and Jolene its another great video 📹 👍.Smiles 😃 from Huntsville Ontario Canada 🇨🇦
He has a vision in his head and the steps necessary to get there, I usually catch up to where he is when he is almost done. I agree I would like to see more curves the art deco style from the period.
I agree I love the build and what Chad and Jolene do but I don't think the sharp angles of the running board and fenders match the curved lines of the truck.
When Jolene sneezed @ 44:38 mark, I naturally said (out loud 🔊), "Bless you"...as if I was right there with you guys. That's just how good of a job you do filming. It's as if we are right there with you.👍
Looking good maybe an easier way with the tight exhaust corners is to 45 then weld it then slice the peak at 45 and bend that flap over. To be honest the front section of the fender looks good. The rear not so, never seen a fender on the rear look like a front fender of a jeep put on backwards. If the exhaust started from the bottom all one piece and was bent with not so tight of a radius then a nice gradual radius over the rear of the tire maybe ending half way down the tire. Cutting and starting over is not fun but sometimes is the best way. This might be one of those times.
As always Chads way I love it yes it could be this or even be that but this is what makes Chad and his build SO BAD CHAD SPECIAL ! Everybody seems to have a thought yes it could it different it could even perfect like it was built in a factory. But its not ! THATS WHY we are here every day knowing we are about to learn something amazing from this BAD CHAD! Thank you
I am not a creator or fabricator but after looking at several pictures of 1930’s c cab tankers it seems your use of exhaust pipe will make the fender and running board assembly much heavier than need be. After looking at those pictures it seems that square stock could be used as a frame to support sheet metal which could be formed to whatever shape you desire. Either way, however, would be a challenge. This isn’t a criticism just a thought. You’re ultra-creative and to a fantastic job. Although I don’t fabricate cars I do learn many things from you that I can use in other applications. Keep on truckin!
@@grahamsatherley7996 ............ #1) Most of the time, Chad does do additional work on these fabrications (and builds in general) during the rest of his day. They just don't film it. #2) Could you do the thinking, then the cutting, bending and welding that Chad does, in only an hour or hour and half? WITH the tools that he uses? Maybe YOU can. I have no embarrassment in admitting, that I couldn't do that. Heck, as thoughtful and analytical as I am, I would most likely still be making my plan 45 minutes into a video.😁
I think that was a great lesson in how to overcome any miscalculation. A great lesson for the average person. If everything went without mistakes we would never learn how to recover and proceed. You are a true master!
This is coming along swimmingly. As of right now I can see the truck 3 different ways. Ya got my crazy creative juices flowing. I can't wait to see the complete vision of yours rolling out for its maiden voyage!!!
Chad I love the way you fabricate on the fly. It is amazing how it always turns out perfect in the end. Great job Chad, great camera work Jolene, great security work Fina. Bill
Really liking the how it's coming together...went from straight pipe to more fluid design, so cool! Hi to Fina from Lucy the husky! Learning so much to use down the road on my own projects.
Love your creativity. I'm thinking all those straight lines on the fenders and running boards would look better with flowing curves. But again, it's your build.
It's really building on the fly i would say, you're doing it the way you have in your brain and not everyone is gonna like it but it's your build and as always you're getting the job done ,and as always great filming Jolene, thanks for sharing
Love the look of the front fenders but not so much the rear but as always fabrication on the go in real time for Chad. Once sheeted i may change my mind. Great video Queen Jolene
I think his eye measurements are better than most people’s measurements with a tape measure!!!! Good job keep up the good work!! Remember metal on metal😂😂
Well, if he had a shop with all kinds of fancy equipment in, he would do that. But the thing that makes bad Chad special in my book is because he builds all these cars with no special tools, and the final results are the same.
As a structural designer for industrial facilities I never did my best work when someone was looking over my shoulder. Bad Chad is doing this right before our eyes with no edits Or skip-aheads.I give him a lot of credit for that.
Your mind on this build is amazing. Keep it up.
Fabrication of a genius Chad you always find a way to make things work
Fantastic camera work on the welding. Thank you
Chad, you are an artist, a sculptor. You put pieces together and turn them into a work of art.
Look at what you guys do together your both artists !!!!!
It's great watching you solving the problems as you go
Love it, I like how you don’t get frustrated and just keep plowing forward.
👍 tricky work. impressive results 👍
Great fab work along with the camera work
Hi Chad & Jolene, how are you two today? This is one time I probably would have gone a different direction and stopped the running board at the back of the cab. Then I would have been able to taper the rear fender front pipes more like the front fender and it would have been easier. As you always say Chad you do you and we can do ourselves. I also am guessing you wanted a more vertical front to the rear fender. You and Jolene are both true artists each in your own way and I love watching both of you work. Chad you are doing a great job on upgrading this older project it is really looking good and when it is finished it will be a true work of art. When you get done with this project it would be great to see paint go on the Bugatti before your next project starts or resumes! I will be back tomorrow as always.
10:57 hi you all, GREAT WORK CHAD . Always amazing watching an artist at work . All the best vinni from uk.
Great camera work Jolene!
Some times with the amount of muffler pipe you use a muffler pipe bender would be a handy tool in the shop. As far as the fenders I would have liked soft radius curves and a little tip down on the front and the back maybe matching the curves in the cab shape some . Good job anyways Chad and Jolene its another great video 📹 👍.Smiles 😃 from Huntsville Ontario Canada 🇨🇦
You're winging it freestyle, my man..
Hey neighbour. Cheers from Parry Sound
He has a vision in his head and the steps necessary to get there, I usually catch up to where he is when he is almost done. I agree I would like to see more curves the art deco style from the period.
I agree I love the build and what Chad and Jolene do but I don't think the sharp angles of the running board and fenders match the curved lines of the truck.
I agree
Can't wait to see the complete job
Great work! Doesn’t look like the easiest project!
When Jolene sneezed @ 44:38 mark, I naturally said (out loud 🔊), "Bless you"...as if I was right there with you guys.
That's just how good of a job you do filming.
It's as if we are right there with you.👍
I just started watching 🎊 and I’m hooked😁😃😀👍🏻
Great 👍 job guys I appreciate all your Tips and awesome videos
Chad and Queen Jolene kicking ass on the wild side once again
You've been gifted with great visual acuity and the talented ability to wing it freestyle..
That Chad comes up with the coolest 😁
You guys are doing a great job
Good job thank you for sharing 👍😎
Good job u. Are doing a great job
I like it! Nice job, Chad.
BAD CHAD - YOU SAVED THE JOB! YOU GOT IT LOOKING GOOD 👍😊
Artists have the vision in there head. He knows what he wants and in the end, it will be one of a kind amazing. Love what you both do. 👍👍
Looking good maybe an easier way with the tight exhaust corners is to 45 then weld it then slice the peak at 45 and bend that flap over. To be honest the front section of the fender looks good. The rear not so, never seen a fender on the rear look like a front fender of a jeep put on backwards. If the exhaust started from the bottom all one piece and was bent with not so tight of a radius then a nice gradual radius over the rear of the tire maybe ending half way down the tire. Cutting and starting over is not fun but sometimes is the best way. This might be one of those times.
Just wanted to say bad Chad fabricating like mad creating his art to feel our heart
Well Done Chad the artist comes through every time!!
I think that 45degree bends might look a little better but I really like this truck
I was gonna mention needs to have a bunch of 90 and 45° bends laying around, make the transitions smoother
As always Chads way I love it yes it could be this or even be that but this is what makes Chad and his build SO BAD CHAD SPECIAL ! Everybody seems to have a thought yes it could it different it could even perfect like it was built in a factory. But its not ! THATS WHY we are here every day knowing we are about to learn something amazing from this BAD CHAD! Thank you
I must say Chad, you can make a silk purse from a sows ear! Nice fabrication on the "45's" !! Great close ups on the camera work!
Love your designs great ideas come from a great mind .awesome work
Great job on the fender Hi Chad & Jolene
I am not a creator or fabricator but after looking at several pictures of 1930’s c cab tankers it seems your use of exhaust pipe will make the fender and running board assembly much heavier than need be. After looking at those pictures it seems that square stock could be used as a frame to support sheet metal which could be formed to whatever shape you desire. Either way, however, would be a challenge. This isn’t a criticism just a thought. You’re ultra-creative and to a fantastic job. Although I don’t fabricate cars I do learn many things from you that I can use in other applications. Keep on truckin!
Looking Awesome!!
Thanks Chad and Jolene for sharing this build. How ever it comes out Im pleased you sharing the day with us.
Cant wait to see the metal over lay great job
Thanks Chad for working hard every day. Always enjoy your vids👍🏼🏆🍺
@@grahamsatherley7996 ............
#1) Most of the time, Chad does do additional work on these fabrications (and builds in general) during the rest of his day. They just don't film it.
#2) Could you do the thinking, then the cutting, bending and welding that Chad does, in only an hour or hour and half?
WITH the tools that he uses?
Maybe YOU can.
I have no embarrassment in admitting, that I couldn't do that.
Heck, as thoughtful and analytical as I am, I would most likely still be making my plan 45 minutes into a video.😁
Excellent job today Chad thanks jolene for sharing. Hi Fina
Keep up the good work mate.
That looks good.
Such a great, unique design. Chad will get it done!
Persistence determination and drive.
✔✔ Good Job, Chad you have very good skills in metalwork. you did a Great Job on the Fabricating 😎 I enjoy the Longer videos👍
Looks tricky 😎👍
Good job!
I love your imagination... keep up the good work :-)
Now that's what I call making a elbow ! Nice job Chad! Thumbs-up !
lookin great bud
The finders are looking great Chad and Jolene 👍
Awesome fabrication.✌️👌👌
What an artist you are and Jolene has been great with the camera work. 👍👍
Big fenders eh ? All that metal wow . Thumbs-up guys on all the hard work I'd give ya both a gold star ⭐
every high school shop class needs a bad chad.
You had to fight a bit but you're getting a good result.
Great work guys 😎👍
Hello from France !
Gona be a cool looking truck 👍👍
Patience and perseverance will always win..... great work guys.Jolene as always great video....👍🇨🇦
It sure is coming together now, Bad chad, and queen Jolene.
Loving it ❤️
More fabrication lessons , looks great and Jolene excellent camera work
Great camera work.
I think that was a great lesson in how to overcome any miscalculation. A great lesson for the average person. If everything went without mistakes we would never learn how to recover and proceed. You are a true master!
You will come through with another masterpiece.
That's going to look pretty nice 👍
That corner piece reminds me of people all polished and sleek on the outside but a complete mess on the inside .😆
You have turned out some awesome work! Some of these cars are too cool to be driven!
Metal has a mind of its own, but so does Chad. Lol
Chad is the Boss that's for sure!
I find that a pretty amazing outcome considering you did it with what you have.
This is coming along swimmingly.
As of right now I can see the truck 3 different ways. Ya got my crazy creative juices flowing. I can't wait to see the complete vision of yours rolling out for its maiden voyage!!!
When I was still a teen (many years ago), I worked for a bit in a muffler shop. I have to say, a pipe bender is a mighty useful tool to have!
exactly what he needs
I think the rear fender should be curved to follow the tire
Chad I love the way you fabricate on the fly. It is amazing how it always turns out perfect in the end. Great job Chad, great camera work Jolene, great security work Fina. Bill
Your the man Chad, and also thank you Jolene for all that you do too.
Once you got it figured out you just keep on trucking, great job man you’re a warrior..🇨🇦❤️✅😎
Looking amazing Chad and by the way Jolene is soo amazing at showing us the right angles thats for sure !!!
It's looking good Chad
Really liking the how it's coming together...went from straight pipe to more fluid design, so cool! Hi to Fina from Lucy the husky! Learning so much to use down the road on my own projects.
Coming along very Nice Chad and Jolene
Love your creativity. I'm thinking all those straight lines on the fenders and running boards would look better with flowing curves. But again, it's your build.
Hope to meet you at the Carralbyn drag display in a few weeks mate!
Looking good
Quite a puzzle! It's getting somewhere.
Chad and Jolene's theme song should be Sinatra's song "I did it my way."
Looking better everyday. This was definitely a challenge. A pipe bender would come in handy on this one. On to the next part. Keep up the great work.
Just another day in the shop for Chad and Jolene
It's really building on the fly i would say, you're doing it the way you have in your brain and not everyone is gonna like it but it's your build and as always you're getting the job done ,and as always great filming Jolene, thanks for sharing
Hey Chad your truck is looking cooler than dang it we love it from Weston West Virginia
I’ve always been impressed by your zip cut skills Chad, I’m pretty sure I’d be picking up a finger or two off the floor 🤘😳 🤣
😂
We think chad talking to us! Nope talking to himself to make sure it is the right fit! Love
It!!
Love the look of the front fenders but not so much the rear but as always fabrication on the go in real time for Chad. Once sheeted i may change my mind. Great video Queen Jolene
I think his eye measurements are better than most people’s measurements with a tape measure!!!! Good job keep up the good work!! Remember metal on metal😂😂
Chad is a zip cut genious.
That was a real battle but in the end you prevailed good outcome. Can't wait for tomorrow 🤗 😍.
Would it have been better to make the outside of the running board and the fenders out of one piece and use a bender for the shape?
Well, if he had a shop with all kinds of fancy equipment in, he would do that. But the thing that makes bad Chad special in my book is because he builds all these cars with no special tools, and the final results are the same.
He has a bender been on before
Awesome, Thanks
As a structural designer for industrial facilities I never did my best work when someone was looking over my shoulder.
Bad Chad is doing this right before our eyes with no edits Or skip-aheads.I give him a lot of credit for that.
Chad continues the fabrication of the fenders. Taking shape and looking good. Great video every day by Queen Jolene
I love the coat hanger technique, your miggin and tiggin at the same time :0)