@@carsandbeatzofficial7545 did u buy the Chinese part or genuine Audi? I’m worried about the Chinese stuff being sub par. That code left me stranded but a reset cleared the code and allowed me to get out of limo mode for now.
@@living9377Put the car back in PARK turn it off. Wait a few seconds restart it and go from PARK to DRIVE and see if it stays out of limp mode. It will stay in limp mode at any malfunction until you restart the car. Of course replace the part but dont get stuck anymore once it resets
Did it resolve the problem, I have the same fault code on my 55plate C5 v6 2.5 trip, the same symptoms and my PRNDS are illuminated in red as well as the clunk in D and R plus it won’t change gear when it’s doing all this which it does after a short time driving it, I’m currently not driving it because of the issue. I've owned the car a month or so and driven it 2or 3 times and I’m desperate to get it fixed hence my opening question. Thanks, great vid too.😊
I have this code on an 04 Audi A4 V6 but I’m experiencing inability to shift gears while in motion sometimes being stuck in 2nd or 4th even from a stop. Would this still help?
do you have the part number, the name or the general information about this sensor?? .... it will be very helpfull for us .... thanks for all my friend .... regards
We scan my audi allroad 2002 and there were 4 fault codes detected. One is P0706, P0741, P1824 and P1819. My question is,if we replace the sensor does it gonna fix the other fault codes.? Thanks
I have no clue if my audi is in limp mode. I can go through every gear but none engages. Anyone knows why? The car was involved in an accident with front end damage. 2017 Audi Q3 FWD
Just happened to me today. I Uber myself to nearest autozone to buy a cheap obd scanner and cleared the code. Limp mode gone but I feel like I’m driving a ticking time bomb
@@living9377 update... Did a scan using Ross Tech software, turns out i had two bad solenoids. Changed those out and replaced with new ones. Second scan..same damn issue. Seems like the (TCM) transmission control module isnt communicating with the solenoids. Bought new TCM now awaiting its arrival
@@josephfahie8147 come to think of it....I think I had a cooler on my passenger seat fall and water fell on the chair. The TCM is right under the passenger side. When you get in there check for moisture and any corrosion. If that is not addressed, (moisture or corrosion) the same thing will happen to your new TCM. There tons of these cars at the junk yard so I will grab a TCM for $15 to see if this fixes it for me if the codes come back. Appreciate the update. People don’t understand my love affair with Audi’s I love them but when they act like this it is nerve wracking. Please update again. I would love to hear if yours got fixed once the TCM arrives. Good luck!
Was a big help. Shops wanted to charge $$. For something easy as that
That’s how it is. Greedy summbitches. Thank God for guys likes and youtube. I’m empowered to tackle this myself
You are best! 😊now i need to see where is located my sensor on my audi 2.4 v6 petrol from 2005!
You video helped out but that bracket above the mount has three bolts and was a pain to get the top out
Thank you
ITS very help full for me
🙏🙏👍👍👍
Did it solve the clunking
2003 Audi A4- Why is everyone telling me it's going to cost me $3000 to fix this? Did you take the transmission out to get to the part?
Finally , thanks bro
easy instructions and good visuals!
Im having trouble finding this part? Can you provide a link for the replacement?
If I remember correctly I think I ordered this one through Amazon. It replaces part number 01V-919-821B.
@@carsandbeatzofficial7545 did u buy the Chinese part or genuine Audi? I’m worried about the Chinese stuff being sub par. That code left me stranded but a reset cleared the code and allowed me to get out of limo mode for now.
@@living9377Put the car back in PARK turn it off. Wait a few seconds restart it and go from PARK to DRIVE and see if it stays out of limp mode. It will stay in limp mode at any malfunction until you restart the car. Of course replace the part but dont get stuck anymore once it resets
@@landonparham9602 and
@@Bossofbossesnyc and then put the car in drive. Is that what you mean?
Thank you very much !
what side did you take it out of passenger side or driver
Did it resolve the problem, I have the same fault code on my 55plate C5 v6 2.5 trip, the same symptoms and my PRNDS are illuminated in red as well as the clunk in D and R plus it won’t change gear when it’s doing all this which it does after a short time driving it, I’m currently not driving it because of the issue. I've owned the car a month or so and driven it 2or 3 times and I’m desperate to get it fixed hence my opening question. Thanks, great vid too.😊
I have this code on an 04 Audi A4 V6 but I’m experiencing inability to shift gears while in motion sometimes being stuck in 2nd or 4th even from a stop. Would this still help?
Hey bro. I'm struggling to locate mine on the 2006 Audi A6 3.0 TDI Quattro. Please make a video on how to find it
Do you know where this part is located on a 2010 Audi A5 2.0?
do you have the part number, the name or the general information about this sensor?? .... it will be very helpfull for us .... thanks for all my friend .... regards
If I remember correctly I ordered the part through Amazon. It replaces part number
01V-919-821B.
2003 and lower don’t have this sensor. Have to replace the whole TCM to fix it.
Incorrect, certain models vary, i just took one off my 2000 Audi A4
We scan my audi allroad 2002 and there were 4 fault codes detected. One is P0706, P0741, P1824 and P1819. My question is,if we replace the sensor does it gonna fix the other fault codes.? Thanks
…..did it sort any of your problems ?
Is the same for the code P07B600?
Is there a follow up video??
Where is the PRND switch in the 1.8 CRV tranny??anybody know?
Hi does the 2003 Audi A4 b6 3.0L Qauttro also use this sensor?
It uses a similar Neutral Safety Switch. Getting to the switch is not as easy though
Where would mine be I have a 2005 A4 1.8T, but my sensor is not where you show yours. Any idea where it might be located? Much appreciated
@Mason Gilbert I have same question, Audi A4 2003 1.8T (B6) FWD, Right Hand Drive Avant..Multitronic, I cant find where this goes on mine
What is the part number?
My triptonic is not working in my a6 audi and drive has a delay
I would check your magnets on your shifter, very simple check around TH-cam for videos on how to take your trim prices off to get to the magnet
I have no clue if my audi is in limp mode. I can go through every gear but none engages. Anyone knows why? The car was involved in an accident with front end damage. 2017 Audi Q3 FWD
Just happened to me today. I Uber myself to nearest autozone to buy a cheap obd scanner and cleared the code. Limp mode gone but I feel like I’m driving a ticking time bomb
@@living9377 update... Did a scan using Ross Tech software, turns out i had two bad solenoids. Changed those out and replaced with new ones. Second scan..same damn issue. Seems like the (TCM) transmission control module isnt communicating with the solenoids. Bought new TCM now awaiting its arrival
@@josephfahie8147 come to think of it....I think I had a cooler on my passenger seat fall and water fell on the chair. The TCM is right under the passenger side. When you get in there check for moisture and any corrosion. If that is not addressed, (moisture or corrosion) the same thing will happen to your new TCM. There tons of these cars at the junk yard so I will grab a TCM for $15 to see if this fixes it for me if the codes come back. Appreciate the update. People don’t understand my love affair with Audi’s I love them but when they act like this it is nerve wracking. Please update again. I would love to hear if yours got fixed once the TCM arrives. Good luck!
@@josephfahie8147 did replacing the TCM help?
@@papas_lapas I replaced the mechatronic unit in the transmission. Works fine now.
I car will not go in reverse