I've put a lot of time and effort into creating this video, so I'd really appreciate it if you could show your support by liking, sharing, and subscribing to our channel for more content like this. You can also find us on Facebook, so please show your support there as well: facebook.com/proknow.official
I appreciate you and also your creative mind and I know how much expensive this project is because I'm also a drone maker and the battery is most expensive part keep it bro
Good work. I definitely recommend mounting the motors facing the inside though, now if you hit a curb or obstacle going backwards, your motors are taking the hit
Brother, I like your content very much as always, but if you want to make any project, what challenges did you face while making it, and how did you fix it, please tell in the video (like yt/ddelectrotech). So that we learn from that mistakes. I think doing this will improve your video quality more. Btw I appriciate your efforts and hard work❤️.
You have great engineering skills! Nice to watch. I learned that we can change the drive shaft position of the brush-less motors which was interesting. The drone motors want to spin at high RPM and thus low torque maybe with less range of speed control than brushed motors I think.
You need to change your channel name to "ESP Pro Know" as you are the king of using these things! Every build you make has me wanting one. I have only dabbled with one ESP8266 for making a scaler for gaming and it hosts it's own website. You though, you make things with them! Love this one!
Thank you so much for the awesome suggestion😁😁 and the kind words! I'm thrilled to hear you enjoy my builds. Your ESP8266 project sounds amazing too! Keep experimenting and creating-there's so much potential with these little devices. 😊
Hello vishal, I had bought your Arduino course a few days ago, I liked it very much, you understood very well, I learned a lot from it, but I have a request to you that you should make a 3D designing course also. Will help us a lot. please replay❤️
Ottimo lavoro! 2 cose sicuramente migliorabili, mettere spessori nelle basette degli attacchi delle ruote per alzare l'altezza da terra della tavola oppure ruote più grandi caso mai gommate.. e due protezioni per i motori elettrici!
Just discovered this video and I really love it. Please keep continue project like this. It inspires me to build more electronic project for myself! Will subscribe for more for sure!
thats a wonderful effort bro, keep up the good work. I wish all of our young generation must do something like that instead of making pranks and fun videos all the time. Best wishes from Pakistan.
Thank you so much for such a nice video. One can only imagine the hardwork you are putting to create this video! I really appriciate your service to the electronics community! On the same note, the tools you are using are quite interesting. Can you make a video on the tools that you have? Ofcourse with prices and sources of them. You gave the list of components/parts and the sources from where you got them. But along with it, a flash list of prices will be very easy for people to estimate the budget for the project at a glance!
Very nice work ! I tried since longtime to make one but I have no enought experience in electronic. If one day you make a step by step tutorial to build a project, let's me know !
Hi, the project is super cool! Plus the result is magnificent, you did a very good job!! Do you plan to make the STL files available, it would be great to try to recreate this at home!! Thanks :)
try to make the battery cover from harder materials , as PLA tends to get soft at temperatures close to 50 degrees and we cannot trust indian roads to be smooth so there will be something or the other that might hit the battery cover
I would add brass inserts to all the screw points on the skateboard frame/chasse so because the plastic threads are gonna strip sooner then later depending on how many times you have to undo the screws to get access to all the electronics under the skateboard chasse and maybe some washers on the screws that are small and may need to deal with all the skateboard movement while it's is use on the Road.
Great project btw But I would also like to say that although I understand the reason for choosing JLCPCB, there are a lot of great Indian alternatives as well. I would much rather have Indian creators promote Make in India instead of using Chinese services. This is not a hate comment; it's just an opinion of mine, that is all.
@@proknow Ok, that's nice. I'm thinking about building that too, but I'm a student yet and I don't have much money.. Do u think 100€ or I think ~ ₹9000 is enough?
My friend, instead of dealing with it like this, it would have been better if you had hidden the electronic unit on top of each other. The covers are very close to the ground and are a big problem, and I can't imagine passing through a wet place.
bro video is so good and explaining each thing ,giving information about the products, but my suggestion is don't you so much English in the videos , you our mother tongue so we can also understand other languages , always make this type of videos
along with ground clearance, you are also subjecting the BLDCs to a major amount of debris drawn towards them by the wheels. I don't think these motors will stand the test of time, there will be fragements of magnetic and non magnetic particles in the motors
Bro i made a hc05 bluetooth car and when i connect the app it works good for like few seonds and then it stops working or responding and blink tx light on arduino i need ro rerun the code to work it again. Any suggestion sir pls pls pls pls reply 😢😢
We should find the place over the skate to put all the batteries... Because this cant't be good... Maybe in our clothes... maybe via satelite ... But this will break before holidays
This skateboard can only go straight because it has low ground clearance. The quality of the materials is terrible! Even for my child. I wouldn't make one with such quality materials!
I've put a lot of time and effort into creating this video, so I'd really appreciate it if you could show your support by liking, sharing, and subscribing to our channel for more content like this. You can also find us on Facebook, so please show your support there as well: facebook.com/proknow.official
@@proknow ❤️❤️❤️❤️❤️
I can see the effort. good job
Sir aapko kya dikkat hai Hindi language se 😢 💔
First Indian channel I have come across with this quality of brilliant content. Kudos man. Keep it up
Thanks man! Your support means a lot🙂
Fantastic work as always, my friend! I admire every bit of effort you put into making your video quality stand out.
Loved the skateboard! 😁🦾
Thanks a ton, brother! Your kind words always inspire me. So happy you liked the skateboard! 🛹😁 Looking forward to your next video too!
One big commercial
9:27 that little green bug is on the project lol
Good to know, this is an Indian channel...keep working bro on amazing project 👍
1:13 Brooo Epic Transition 😍😍😍 really really love it ❤️🩹
Glad you like it😊
Mind-blowing Skateboard 🤯
You are a Great Maker Vishal Bhaiya 😍🔥
Video Editing is soo sooo Good 💯❤👏👏👏👏👏👏👏👏👏👏
Thanks a lot, Sahil! I'm really glad you enjoyed the skateboard and the video editing. Your support means a lot, brother! 😊🛹
mark rober of India, great bro.. just for economical cause we lag behind
@Mr.geniusCreation rip bhai😭😭😭😭
This is My India... Good Job...Great Video.!!
The video editing on this is crazy good.
Glad you think so, Thank you very much!😊
Really good project.
Move the electronics to a backpack or "fanny pak" and just run wires from the ESC down to the motors. No more clearance issues.
you can upgrade it by desining a wooden board and make it a little higher to avoide any proplem at the road'
your project is fantastic❤
I appreciate you and also your creative mind and I know how much expensive this project is because I'm also a drone maker and the battery is most expensive part keep it bro
Good work. I definitely recommend mounting the motors facing the inside though, now if you hit a curb or obstacle going backwards, your motors are taking the hit
This was pure engineering heaven. What an amazing video and showcase of your design skills and creativity :) sooooo good!
Thank you very much for your kind words🙏
Brother, I like your content very much as always, but if you want to make any project, what challenges did you face while making it, and how did you fix it, please tell in the video (like yt/ddelectrotech). So that we learn from that mistakes. I think doing this will improve your video quality more. Btw I appriciate your efforts and hard work❤️.
Thank you very much for your kind words and suggestions, I will try my best to make more detailed videos as you suggested.
You have great engineering skills! Nice to watch. I learned that we can change the drive shaft position of the brush-less motors which was interesting. The drone motors want to spin at high RPM and thus low torque maybe with less range of speed control than brushed motors I think.
My brother is artist❤
I think you also need to check the temperature of the battery too.
You need to change your channel name to "ESP Pro Know" as you are the king of using these things! Every build you make has me wanting one. I have only dabbled with one ESP8266 for making a scaler for gaming and it hosts it's own website. You though, you make things with them! Love this one!
Thank you so much for the awesome suggestion😁😁 and the kind words! I'm thrilled to hear you enjoy my builds. Your ESP8266 project sounds amazing too! Keep experimenting and creating-there's so much potential with these little devices. 😊
Bro's content and it's quality is next level
Hello vishal, I had bought your Arduino course a few days ago, I liked it very much, you understood very well, I learned a lot from it, but I have a request to you that you should make a 3D designing course also. Will help us a lot. please replay❤️
Video Bahut achha laga..... Ground clearance thoda kam hain but It can be upgraded ❤.... Awesome Project
aapane sahee kaha...Thank you very much🙏😊
Ottimo lavoro!
2 cose sicuramente migliorabili, mettere spessori nelle basette degli attacchi delle ruote per alzare l'altezza da terra della tavola oppure ruote più grandi caso mai gommate.. e due protezioni per i motori elettrici!
Just discovered this video and I really love it. Please keep continue project like this. It inspires me to build more electronic project for myself! Will subscribe for more for sure!
What a great video. Excellent build 😀🤗
I have a suggestion instead of keeping battery downside of skateboard keep it above then ground clearance will b more 🎉
thats a wonderful effort bro, keep up the good work. I wish all of our young generation must do something like that instead of making pranks and fun videos all the time.
Best wishes from Pakistan.
Thank you so much for such a nice video. One can only imagine the hardwork you are putting to create this video! I really appriciate your service to the electronics community! On the same note, the tools you are using are quite interesting. Can you make a video on the tools that you have? Ofcourse with prices and sources of them. You gave the list of components/parts and the sources from where you got them. But along with it, a flash list of prices will be very easy for people to estimate the budget for the project at a glance!
Very nice work ! I tried since longtime to make one but I have no enought experience in electronic. If one day you make a step by step tutorial to build a project, let's me know !
Can we also use gears to reduce the output kv rating and getting high torque ?? ❤❤
Love the vedio
I was expecting w solid animation,and here it is
This is the first video of your's that I saw and I saw your professionalism and you just earned a sub
Welcome🤗 to our channel.
Love from 🇧🇩
Content and Video editing 💥👌
Simply amazing.
Dear which camera 📸 you are using to record such a quality content ⁉️
This is so good! super inspiring man.
Finally some competition to vishal skater
Wait, are you talking about me or someone else? 😅 Funny coincidence-my name's Vishal too!
La edición de este video es genial, muy buen trabajo 😎
انا لازم اكسب المره دي 😂😂❤
Hi, the project is super cool! Plus the result is magnificent, you did a very good job!!
Do you plan to make the STL files available, it would be great to try to recreate this at home!!
Thanks :)
mark rober of India, great bro.. just for economical cause we lag behind
Insane engineering
Thanks 😊
mark rober of India, great bro.. just for economical cause we lag behind
Glad you think so🙂, Thank you very much for your support🙏
@@proknow bro u replied me or whom 😂, I think it's me 🥲
@mr-x-003 Yes, I replied you, Sorry I forget to tag you.
What program are you use for 3d modelling?
try to make the battery cover from harder materials , as PLA tends to get soft at temperatures close to 50 degrees and we cannot trust indian roads to be smooth so there will be something or the other that might hit the battery cover
I would add brass inserts to all the screw points on the skateboard frame/chasse so because the plastic threads are gonna strip sooner then later depending on how many times you have to undo the screws to get access to all the electronics under the skateboard chasse and maybe some washers on the screws that are small and may need to deal with all the skateboard movement while it's is use on the Road.
Great project btw
But I would also like to say that although I understand the reason for choosing JLCPCB, there are a lot of great Indian alternatives as well. I would much rather have Indian creators promote Make in India instead of using Chinese services.
This is not a hate comment; it's just an opinion of mine, that is all.
max speed achieved
How fast is the skateboard? Very nice project!
I didn't measure the speed, but I didn't use throttle more than 50% since I'm a beginner at skateboarding. But it can go faster.
@@proknow Ok, that's nice. I'm thinking about building that too, but I'm a student yet and I don't have much money.. Do u think 100€ or I think ~ ₹9000 is enough?
Robu is ❤
My friend, instead of dealing with it like this, it would have been better if you had hidden the electronic unit on top of each other. The covers are very close to the ground and are a big problem, and I can't imagine passing through a wet place.
Man! You're the maker
Thanks a ton! 🙌 It’s the passion for making that keeps me going. Glad you enjoyed it!
@@proknow why don't you start a startup for tech like these? Or do you have one already?
@@yugalsharma13 You guessed it right, work is in process🚀😁
Thank you for your video. Fantastic!
overall project was amazing, but you could have done better with the battery and BMS in a better places, constantly rubbing with the greound
can you bulid 300w power station for outdoor camping.or in light cut
what is maximum speed of the board
super mechanism
Great Project Bro,
Good Looking
Glad you like it!😊
Bro can you plz make a video on Diy mini arduino drone with coreless brushed motors which can be controlled using Mobile, under budget 🔥 ✨
Nice,thank you :)
Bro 3548 790kv motor use to making a rc plane build video and testing video upload please 🙏
Ok, I will make it very soon, Thank you for the suggestion🙏😊
love your efforts and presentation!
Bro what do you for living?
He do money laundering
Scamming Americans bro
Hoe the fluff @@Schjoenz
Smuggling 😅
How far it can go on single charge ?
what full cost this project. and also tell me if i want to buy the product form you ?
i like your skills and your creation too
Your words mean a lot to me. Thank you very much!
Brother where did you got that soldering iron ??
what is the max speed and is the torque is enough to handle small bumps and hill ??
you should build something to protect the motors so it doesn't get damaged by rocks
Thank you for the suggestion
@@proknow your welcome
Indians are cooking 🚀
bro video is so good and explaining each thing ,giving information about the products, but my suggestion is don't you so much English in the videos , you our mother tongue so we can also understand other languages , always make this type of videos
It is the best channel in the world
Glad you think so, Thank you very much for your support😊
Bro you are genius 🎉
How much will it cost to build this project ? btw awsm video
Bro acsilent quality video 🎉
Thumbnail looks real good ✨
the 3d printed motor mount might not hold for long
along with ground clearance, you are also subjecting the BLDCs to a major amount of debris drawn towards them by the wheels. I don't think these motors will stand the test of time, there will be fragements of magnetic and non magnetic particles in the motors
man I hvae been planning to make one from past month
Amazing creation brother
Thank you so much 😀
i saw the board flex a little
Amazing absolutely stunning innovation ❤
Thank you very much brother🙏😊
Ur video quality and editing is too good
Thank you so much 😀
What is the music name between 9:09 and 10:00, I could't find it from the list or by shazam
Bro i made a hc05 bluetooth car and when i connect the app it works good for like few seonds and then it stops working or responding and blink tx light on arduino i need ro rerun the code to work it again. Any suggestion sir pls pls pls pls reply 😢😢
Amazing
How you charge the Battery?
muito bom
I wanna buy your remote for my handmade electric skateboard ☺
Really cool project!
Proud of you my Man
Thank you very much sir, your support means a lot🙏😊
can i know the budget of this project?
We should find the place over the skate to put all the batteries... Because this cant't be good... Maybe in our clothes... maybe via satelite ... But this will break before holidays
cool project 👍
This skateboard can only go straight because it has low ground clearance. The quality of the materials is terrible! Even for my child. I wouldn't make one with such quality materials!
Womp womp.
Humre yhan k rood pe to iska motor , battery,chakka sb alg alg ho jaega 😂😂
Namashkar, and jai shree ram.🔥🔱🕉️
Jai Shree ram🙏
@@proknow ❤️❤️❤️
you are a legend bro
Wow, thanks a lot! 😄 Just doing what I love. Your support makes it all worth it!
after a long time you upload video
hey . is it possible to buy the pcb of this project from you?