All the subjects playlist of Engineering Funda is available in comment section. Share it with your friends to support us. Your positive comments motivates me and person like me get boosted by my students feedback. Thanks and welcome 🙏
All the subjects playlist of Engineering Funda is available in comment section. Share it with your friends to support us. Your positive comments motivates me and person like me get boosted by my students feedback. Thanks and welcome 🙏
Your Appreciations, care and share matters a lot to me. #EnginneringLove. All the subjects playlist of Engineering Funda is available in comment section. Share it with your friends to support us. Your positive comments motivates me and person like me get boosted by my students feedback. Thanks and welcome 🙏
All the subjects playlist of Engineering Funda is available in comment section. Share it with your friends to support us. Your positive comments motivates me and person like me get boosted by my students feedback. Thanks and welcome 🙏
Thank you so much sir for these video. You explain complicated topics in so simple and easy manner. Thank you so much for the whole series of lectures.🙇
Your Appreciations, care and share matters a lot to me. #EnginneringLove. All the subjects playlist of Engineering Funda is available in comment section. Share it with your friends to support us. Your positive comments motivates me and person like me get boosted by my students feedback. Thanks and welcome 🙏
Your positive comments motivates me. Teachers like me just wants positive comment from student. Love from you guys means a lot to me. My goal is to create largest community of engineers in entire globe. Please help me by sharing this playlist with your friends.
Bro.... Its better for us... If u give us time to take the screenshot at last of the whole page... So that we can make the print out and we can have that notes with us for future use...
Good Explanation sir.. I want some clarification in this concept . 1) How to anode current comes to zero ? and again go to negative peak ? (shall we decrease supply voltage for this?) 2) How to remove charge carries at junctions (J1,J2,J3). (for this shall we apply any voltages (forward or reverse voltages) across junctions. 3) While removing charge carries at J1,J3, why it come to negative peak and again goes towards the steady state but while removing charge carries at J2 this is not happen why?
Your Appreciations, care and share matters a lot to me. #EnginneringLove. All the subjects playlist of Engineering Funda is available in comment section. Share it with your friends to support us. Your positive comments motivates me and person like me get boosted by my students feedback. Thanks and welcome 🙏
All the subjects playlist of Engineering Funda is available in comment section. Share it with your friends to support us. Your positive comments motivates me and person like me get boosted by my students feedback. Thanks and welcome 🙏
Your positive comments motivates me, my goal is to create largest community of engineers in entire globe, so please help me for that by sharing this lecture series(playlist) with your friends in social media (watsapp, telegram etc). Thanks and welcome 🙏
Your positive comments motivates me. Teachers like me just wants positive comment from student. Love from you guys means a lot to me. My goal is to create largest community of engineers in entire globe. Please help me by sharing this playlist with your friends.
Your positive comments motivates me, my goal is to create largest community of engineers in entire globe, so please help me for that by sharing this lecture series(playlist) with your friends in social media (watsapp, telegram etc). Thanks and welcome 🙏
Your positive comments motivates me. Teachers like me just wants positive comment from student. Love from you guys means a lot to me. My goal is to create largest community of engineers in entire globe. Please help me by sharing this playlist with your friends.
next level of ads , try to reduce them , i also have a youtube channel it's not huge but try to keep ads at the start and end only , there is a option for that
19:33 When Thyristor is in OFF condition again, then how is it possible to have anode voltage=0 ... It should be "Ve" again... Pls Clear my doubt... Although very helpful video !!!
Vbo=(Break over voltage). Sir,As we know that to turn ON SCR ,the three junctions must be in forward,also known that to turn ON we have to provide gate signal. Without gate signal to turn ON SCR we provide Vbo .Sir I want to know that when we want to turn ON without gate signal using Vbo. Is in this condition j2 remain in forward baise yes or not. If yes then how
J2 is in reverse bias when anod is +very with respect to cathode , and when j2 breaks down SCR conducts . If you increase gate current then break down voltage of j2 goes low.
Why tc is btw 1st instant of anode current nd last instant of anode voltage.......?? Why cant it be at the ending instant of anode current that is where it reached zero na?
Sigh. Just not a fan of the midstream ads. I understand your need to generate revenue, but it's like sitting in a lecture where every few minutes someone comes in and disrupts the lecture to sell a product. I find it impossible to keep watching. Thanks anyway, I appreciate the level of detail in your presentation. Cheers
Your Appreciations, care and share matters a lot to me. #EnginneringLove. All the subjects playlist of Engineering Funda is available in comment section. Share it with your friends to support us. Your positive comments motivates me and person like me get boosted by my students feedback. Thanks and welcome 🙏
*🔥All Premium Courses Link of Engineering Funda🔥*
docs.google.com/spreadsheets/d/1LeLxZPGiMB_ZDZggbZp3P7fK516pXYhVgZA__djNkWM/edit#gid=0
Layers are arranged as per P1-N1-P2-N2, it is not P1-N1-P2-P2, its bit writing error.
Yes right
Haa haa chal maalum hai
⬇ *Premium Courses of Engineering Funda* ⬇
✅ *༺🚩ARM Processor 🚩༻* - th-cam.com/play/PLgwJf8NK-2e7nFEozQhZDZDSm09SwqbGP.html
✅ *༺🚩Microprocessor 8085 🚩༻* - th-cam.com/play/PLgwJf8NK-2e5vHwmowy_kGtjq9Ih0FzwN.html
✅ *༺🚩Microprocessor 8086 🚩༻* - th-cam.com/play/PLgwJf8NK-2e4oAeDid0hwuiol_RJdscrp.html
✅ *༺🚩AVR Microcontroller 🚩༻* - th-cam.com/play/PLgwJf8NK-2e55CdbY_WnY6pejPHoojCkJ.html
✅ *༺🚩8051 Microcontroller 🚩༻* - th-cam.com/play/PLgwJf8NK-2e49i6neo70aGtFLvKeZ3IQD.html
✅ *༺🚩80386 & Pentium Processor 🚩༻* - th-cam.com/play/PLgwJf8NK-2e7f4yPj6AbrUoburKwX0fFA.html
✅ *༺🚩Embedded System 🚩༻* - th-cam.com/play/PLgwJf8NK-2e5xvXygtghfi-tzyeACx7CO.html
✅ *༺🚩VLSI 🚩༻* - th-cam.com/play/PLgwJf8NK-2e6au9bX9P_bA3ywxqigCsaC.html
✅ *༺🚩Digital Electronics 🚩༻* - th-cam.com/play/PLgwJf8NK-2e7nYSG31YWEUfwgAp2uIOBY.html
✅ *༺🚩Network Theory 🚩༻* - th-cam.com/play/PLgwJf8NK-2e7AccPu8mUhhsJNol9uIKTJ.html
✅ *༺🚩Control Engineering 🚩༻* - th-cam.com/play/PLgwJf8NK-2e43et6qbo4IqYSJCv-6kN90.html
✅ *༺🚩Electromagnetic Theory 🚩༻* - th-cam.com/play/PLgwJf8NK-2e4I_YltJja47CwZJkzNWK89.html
✅ *༺🚩Power Electronics 🚩༻* - th-cam.com/play/PLgwJf8NK-2e5Hnu82T1CYLZ8kbZs4Jx8x.html
✅ *༺🚩Basic Electronics 🚩༻* - th-cam.com/play/PLgwJf8NK-2e5G05PTgyTTSVyzTOKRfmTn.html
✅ *༺🚩Signal and System 🚩༻* - th-cam.com/play/PLgwJf8NK-2e7VdLw7PebRTcZXb_4nKeVh.html
✅ *༺🚩Optical Communication 🚩༻* - th-cam.com/play/PLgwJf8NK-2e7CDIWsh61eItP9iRw1EIQc.html
✅ *༺🚩Analog Communication 🚩༻* - th-cam.com/play/PLgwJf8NK-2e7uyUYrpgUUQowmRuKxRdwp.html
✅ *༺🚩Digital Communication 🚩༻* - th-cam.com/play/PLgwJf8NK-2e5PngHbdEadEun5XPvnn00N.html
✅ *༺🚩Antennas & wave Propagation 🚩༻* - th-cam.com/play/PLgwJf8NK-2e7tzLIDL4aXUbtRFY3ykmkT.html
✅ *༺🚩Microwave Engineering 🚩༻* - th-cam.com/play/PLgwJf8NK-2e6A4Mtxud6xPHE1UecxWsHW.html
✅ *༺🚩RADAR Engineering 🚩༻* - th-cam.com/play/PLgwJf8NK-2e4KmA52Jw3-JhDhFIDQZ9Bv.html
✅ *༺🚩Audio Video System / TV 🚩༻* - th-cam.com/play/PLgwJf8NK-2e7EJcPI0P_DMw49ufTYfuOz.html
✅ *༺🚩Engineering Drawing/ Graphics 🚩༻* - th-cam.com/play/PLgwJf8NK-2e79xuABrIQeXYlGuuickEz7.html
✅ *༺🚩Basic Mechanical Engineering 🚩༻* - th-cam.com/play/PLgwJf8NK-2e7Fe4vAYDaL0bpseGNhc9on.html
✅ *༺🚩Mechanics of Solid 🚩༻* - th-cam.com/play/PLgwJf8NK-2e53xcLCS7ay2iLRolNxyxFk.html
✅ *༺🚩Theory of Computation 🚩༻* - th-cam.com/play/PLgwJf8NK-2e6GfXdwqWX5YmszV2KGv-yl.html
✅ *༺🚩Java Programming 🚩༻* - th-cam.com/play/PLgwJf8NK-2e5BeN1WTXg1ENPtkRR3SfCI.html
✅ *༺🚩Python Programming 🚩༻* - th-cam.com/play/PLgwJf8NK-2e5pY2eB-Lht2_CerQue0Xo4.html
✅ *༺🚩Placement Test series on C 🚩༻* - th-cam.com/play/PLgwJf8NK-2e5ovLgoJkv0Pn58UrucrTPt.html
✅ *༺ Please Share it with your friends to support us. ༻*
👉 *༺ You can also support us by joining us ༻* : th-cam.com/channels/dlnqMpRrMcClK2fT6z8EEw.htmljoin
Itna easy way me college prof ne bhi nahi sikhaya tha sir thank you❤
All the subjects playlist of Engineering Funda is available in comment section. Share it with your friends to support us.
Your positive comments motivates me and person like me get boosted by my students feedback. Thanks and welcome 🙏
I am very thankful to you for explaining whole switching characteristics in easy way......🙌
All the subjects playlist of Engineering Funda is available in comment section. Share it with your friends to support us.
Your positive comments motivates me and person like me get boosted by my students feedback. Thanks and welcome 🙏
Muth marega
love from ladakhi student...
Your Appreciations, care and share matters a lot to me. #EnginneringLove.
All the subjects playlist of Engineering Funda is available in comment section. Share it with your friends to support us.
Your positive comments motivates me and person like me get boosted by my students feedback. Thanks and welcome 🙏
This video is really helpful. iam very grateful to you sir .you doing such a great thing . Thanks
your explanation is very fundamental thank's alot sir.
All the subjects playlist of Engineering Funda is available in comment section. Share it with your friends to support us.
Your positive comments motivates me and person like me get boosted by my students feedback. Thanks and welcome 🙏
Simple easy way explanation of each and every point , respect to you sir . Also u start lect without much time wasting in intro and all other stuff.
Love and happiness of students is my ultimate goal, God bless you 🙏, keep learning and keep progressing.
@@EngineeringFunda ❤️
Thank you so much sir for these video. You explain complicated topics in so simple and easy manner. Thank you so much for the whole series of lectures.🙇
Your Appreciations, care and share matters a lot to me. #EnginneringLove.
All the subjects playlist of Engineering Funda is available in comment section. Share it with your friends to support us.
Your positive comments motivates me and person like me get boosted by my students feedback. Thanks and welcome 🙏
Sir! You deserve something more than this "🙏🏼"!
1 of best lecture series on you tube!
easy to understand !
Thanks a ton
It is now clear to me Sir, thank you very much
Your positive comments motivates me.
Teachers like me just wants positive comment from student.
Love from you guys means a lot to me.
My goal is to create largest community of engineers in entire globe. Please help me by sharing this playlist with your friends.
Very well explained. Thankyou for this!
Bro.... Its better for us... If u give us time to take the screenshot at last of the whole page... So that we can make the print out and we can have that notes with us for future use...
Resume kar and screenshot lele
Bakchodi ghar rakh ke aya kar
Thankq veryyyyy much sir....... 😀
Wish I had seen dis during ma clg days
Your welcome dear 🙏
Thank you prof. 19:30 shouldn't the anode voltage increase again to a value as before switching ON ?
Good Explanation sir.. I want some clarification in this concept .
1) How to anode current comes to zero ? and again go to negative peak ? (shall we decrease supply voltage for this?)
2) How to remove charge carries at junctions (J1,J2,J3). (for this shall we apply any voltages (forward or reverse voltages) across junctions.
3) While removing charge carries at J1,J3, why it come to negative peak and again goes towards the steady state but while removing charge carries at J2 this is not happen why?
Did u get answer??
Same doubt..if u got the answer please reply
sir..u r doing awesome job ....god bless uh..😃
Very good explanation sir.Thank you😊
Your Appreciations, care and share matters a lot to me. #EnginneringLove.
All the subjects playlist of Engineering Funda is available in comment section. Share it with your friends to support us.
Your positive comments motivates me and person like me get boosted by my students feedback. Thanks and welcome 🙏
thanks a lot sir you explain is amazing clear and also easy to understand i like it very much keep going!!!!!!!!!
this lecture series is very helpful for me gthankyou very much sir
kya baat hai.... umda pradarshan
THQ SIR FOR MAKING SUCH A GERAT VIDEO
All the subjects playlist of Engineering Funda is available in comment section. Share it with your friends to support us.
Your positive comments motivates me and person like me get boosted by my students feedback. Thanks and welcome 🙏
awesome explanation never read such details, great work sir.
Your positive comments motivates me, Thanks and welcome 🙏
Nice explanation tq for giving this video to us
Your positive comments motivates me, Thanks and welcome 🙏
Toff is till anode voltage attains zero right?
Thank you sir
I have query what is the direction of charge carrrier when current flow in negative direction
Direction of electrons will be in opposite direction to the flow of current and holes will be in the direction of flow of current.
Sir i mean from P1 to N2 or N2 to P1
Very nicely explained..sir
Your positive comments motivates me, my goal is to create largest community of engineers in entire globe, so please help me for that by sharing this lecture series(playlist) with your friends in social media (watsapp, telegram etc). Thanks and welcome 🙏
Great and useful.
Thanks sir
Your positive comments motivates me, Thanks and welcome 🙏
Clear explanation tq ....sir
beautiful explaination !
Your positive comments motivates me.
Teachers like me just wants positive comment from student.
Love from you guys means a lot to me.
My goal is to create largest community of engineers in entire globe. Please help me by sharing this playlist with your friends.
Very well explained 👏
Your positive comments motivates me, my goal is to create largest community of engineers in entire globe, so please help me for that by sharing this lecture series(playlist) with your friends in social media (watsapp, telegram etc). Thanks and welcome 🙏
@@EngineeringFunda sure I'll share your video!hope you'll be successful whatever you want!😇
Sir why voltage is negative when current is decreases initially when voltage is increases current is minimum
sir when ia reached maximum negative value why spikes is voltage occured??could u pls explain.
Nice explain sir
Your positive comments motivates me.
Teachers like me just wants positive comment from student.
Love from you guys means a lot to me.
My goal is to create largest community of engineers in entire globe. Please help me by sharing this playlist with your friends.
Is spread time and settling time is same?
does thyristor switching characteristics is same as scr switching characteristics?
SCR is thyristor only
What will happen to Ig in the turn off case?
Excellent explanation bro
Wonderful explanation sir....
Love and happiness of students is my ultimate goal, God bless you 🙏, keep learning and keep progressing.
Good explaination sir
Super 👌👌👌👌 sir
Nice explanation
Your welcome 🙏
Too good sir
how are you changing the anode current while turning SCR OFF?
Thanks u so much sir
your welcome
Please upload the videos of numerical problems as in Engineering syllabus.
supeer teaching
Good explanation, thanks
Your positive comments motivates me.
sir please try to bring down the number of ads. it is some times too much annoying and infact it affects the flow of this tutorial
next level of ads , try to reduce them , i also have a youtube channel it's not huge but try to keep ads at the start and end only , there is a option for that
Thank you sir .
Sir can you please tell how you made this video
still nice tut... thanq sir
Why the anode current will go negative max value in turn off time characteristics.
Thanks sir
@devesh: your welcome
Super bro
Thanks a lot......
19:33
When Thyristor is in OFF condition again, then how is it possible to have anode voltage=0 ...
It should be "Ve" again...
Pls Clear my doubt...
Although very helpful video !!!
Its clearly explained, I don't see any error
how about the graph for 'vg' during turn off.. i know it would be zero.. but ya:))
When SCR is off how will the anode Village be maximum?
Lol
Vbo=(Break over voltage).
Sir,As we know that to turn ON SCR ,the three junctions must be in forward,also known that to turn ON we have to provide gate signal.
Without gate signal to turn ON SCR we provide Vbo .Sir I want to know that when we want to turn ON without gate signal using Vbo. Is in this condition j2 remain in forward baise yes or not. If yes then how
J2 is in reverse bias when anod is +very with respect to cathode , and when j2 breaks down SCR conducts . If you increase gate current then break down voltage of j2 goes low.
Sir plz power electronics ke numerical bhi sikhaye na
Engineering funda can you take youtube live of our webinar on October 3
I have to see my schedule
Why tc is btw 1st instant of anode current nd last instant of anode voltage.......?? Why cant it be at the ending instant of anode current that is where it reached zero na?
🔥👻
Your welcome 🙏
Sir I am not able to understand the characteristics of scr and v-i characteristics of scr
Superp 👍
There is no video on Heat sink design and calculation
My god. Thnx sir.
A mistake at 4:00 in the circuit diagram of scr.The lowest section in the scr would be n region, and you have shown it as p.
I have pinned my comment in this video, you can see that.
Explain how the curves came
Why that delay takes place what's the reason.
Sigh. Just not a fan of the midstream ads. I understand your need to generate revenue, but it's like sitting in a lecture where every few minutes someone comes in and disrupts the lecture to sell a product. I find it impossible to keep watching. Thanks anyway, I appreciate the level of detail in your presentation.
Cheers
Same here Bhai .
Very Disillusioned.
Why don't you use youtube premium
Sir ones scr is turned on how can we off without gate
By decreasing anode current below holding current.
@@EngineeringFunda thank you sir
Plz sir Pulse transformer ki video bnaona
❤
Your Appreciations, care and share matters a lot to me. #EnginneringLove.
All the subjects playlist of Engineering Funda is available in comment section. Share it with your friends to support us.
Your positive comments motivates me and person like me get boosted by my students feedback. Thanks and welcome 🙏
at 1:12
the layer must be P1 N1 P2 N2. But there is a mistake I think, You have mentioned P1 N1 P2 P2 .
yes
How to reduce anode current by keeping anode voltage constant
Use current source
@@EngineeringFunda there is no practical current source
For high input impedance it could be realistic
Sir aap hindi me bhi videos banate to aur Better hota .Sir please hindi me series video banaye
How to remove charge Carriers at J1 J3 and J2??
scr is shown as P1N1P2P2 which is wrong i think.it would be P1N1P2N2
Type erro
is Toff = Tc?
sir ye notes kahan milenge
🔥🔥
💟💟💟💟
Ceretain amount
Sir Kai khabr j nai padti 😅
nyc but you take p2 p2 same so circuit is totally wrong
Not clearly understand this topic 🧠🤯
Not understand
Ya to padhalo ya adv krlo
thanks sir
Thanks sir