Why does adding stickers to cubicle custom increase the price by $10? Before cubicle custom was made, the price increase to add stickers was only $3. I feel like $5 or $6 is reasonable but $10 seems overpriced.
If you have a lube preference, then it would save a fortune to buy the lube. But I can understand getting it for the magnets. The target of premium cubes is people who don't know how to make the cube good.
To be fair you need to check the wording you merely asked them if they had the ability to draw one, they just answered your question. To have a better chance you could have said, "may I have a drawing of a firebreathing penguin, you can put it in the box" or something like that.
@@DDHDTV I'm planning to use RAID 5. I know there's a bit of controversy about it in terms of how well it rebuilds, but I'd say the vast majority of professional editors I know use RAID 5 and have used it for ages. I also keep backups that aren't at my house in case my house burns down. So even if the RAID failed to rebuild, I'd still have backups of those files.
My Angstrom Huanglong M came with so many air bubbles. EVEN I could do better. Sadly, I requested for a logo change on green, which I have seen many people do, was denied. After I did 100 solves to break in the cube, and it popped 7 times. I have a light turning style btw. I will try speedcubeshop later.
A Huanglong with Gravitas, DNM-37 and light magnets? Sounds like a lubed fidget spinner to me... how did you control that? EDIT: and Lubicle black.. Does it spin endlessly when you set it down on an angled surface?
Gravitas actually slows down the cube because it is thick like Vaseline. The Huanglong is my main and I have basically the same setup, as long as you put enough lube the cube will not be too fast.
Regarding 11:00 ~, part of the fact that the price was only $10 more is that you got stickerless- they charge around $10 just to resticker a cube Edit: oh NVM you talked about that
24 fps is standard for film. Never use 60 unless it's for slow motion, it looks too smooth and not life like. If you do all of your videos in 60 then you need a camera that can shoot higher fps than 60 for any slow-motion
Just received my YJ MGC 3x3 its my first magnetic cube . My question : is there alternative to lube my cube? Not the ones they sell in cubes market , something to find home or buy from walmart.
Enigma You can buy Traxxas 50k from Walmart I believe - it’s for remote control cars but it works well in cubes just the same. It won’t be as good as Angstrom and Cubicle lube but it’s still great. You just have to make sure you don’t put too much in it or else it’ll slow down your cube. Or you could just order it from amazon for under $10. Cubicle lubes are still the best tho
@@StevenWintringham Little magic is a budget cube and also the mgc and mf3rs2 they customize it because it has a lot of potential. 356R is a budget cube too and has a lot of potential.
@@migzy6931 let me rephrase that. The other inexpensive cubes for which a customer is in is available are all widely considered grape Cubes, but I don't know of any notable cubers that use the R
Hey Olson ! Do you have any tips to get faster at 3x3 ? I average around 18 seconds and I use CFOP. I use 2 look OLL and I don't know G and R perms of PLL. I learned CFOP 5 months ago .
All the way back when I first heard the cubicle announce cubicle custom "Customize your own cube", it made me think that they added the ability to customize any WCA NxNxN cube from the cubicle, so I thought I would be able to do that to any cube I wanted, but, unfortunately, you can't, I wish at least you could do it to any budget 3x3 that they have. Just disappointed that the cubicle has not been adding any more cubes to Cubicle Custom.
I feel like the new lube service is a little pointless. I'm one of the people that owns most of the cubicle's lubes and likes to set up my own. I think that who don't set up their own cubes would have no clue how to use the service, as they would have no clue what lube combinations work the best to fit their turning styles, and they would probably end up picking a preset. This basically means that the old set up would do the exact same thing, just for at least $10 cheaper. People like me who understand what different lube combos do have no use for the service. In short, I can't really figure out what type of person benefits from this.
I mean, you probably used your personal address so if they're not dumb, they'll realize you were ordering that cube. So they could really well purposely make it better than the others they send. But they didn't respect the approximated processing time
@@N04HB0T I highly doubt any of the employees recognize my address. I only used all different information because I knew people would complain otherwise. There's hundreds if not thousands of orders and addresses that come in a day. A random cube maker in pro shop isn't going to just recognize my address out of the blue. Especially since I don't place orders.
I've had a pretty bad experience using cubicle custom. I ordered a Yuxin Huanglong from them that was black but they sent me a stickerless version that was horrible and required my own setup to get good. Has this happened for anyone else?
@@cyotheking I didn't have the time and I thought that for as long as I waited everything would have been completed correctly the first time. But its no big deal and thank you for the suggestion if I have future issues.
No fire penguin? I'm disappointed.
Your from scs
@@Cubetin_2005 why?
@@hammie4530 he mostly buy at scs but not in cubicle
@@Cubetin_2005 so?
@@cubewiki8371 what?
I've never thought of my discount code as 'juicy' before...
JRCuber ✔️what’s your discount code
Edit: sorry I saw this comment before that part in the video
This not scam?
Incognito mode... i see you chris... i see you
Zezorak you see me...
No you don’t- that’s the point of incognito mode
69 likes lol
Brian McEntee #21 that’s the joke idiot
Hehe
Why does adding stickers to cubicle custom increase the price by $10? Before cubicle custom was made, the price increase to add stickers was only $3. I feel like $5 or $6 is reasonable but $10 seems overpriced.
Stickers only cost about $3, so why would they charge $7 just to sticker a cube? I would rather sticker it myself than pay $7 extra for stickers.
What if I want stickers on my stickerless cube
Waiting for Kian to comment about using keyboard
Welcome to 2018 where ordering a cube is like ordering a pizza
Why are the angstrom cubes discontinued
Because Cubicle Custom is a thing
They are on the new website
Bennett Capelle can you link it
FaZe Ocean thecubicle.com
FaZe Ocean You can still buy them in their new website. thecubicle.com
I really want a 356 X Cubicle Custom too! Can’t wait for it!!!
TheCuberCubes the price would be really high. 😬
@@nawabsahab04 I like your vids.
@TheCuberCubes thanks a lot! It really means a lot to me
It's gonna be at least $100 lol
If you have a lube preference, then it would save a fortune to buy the lube. But I can understand getting it for the magnets. The target of premium cubes is people who don't know how to make the cube good.
Wish there was a cubicle custom square 1
Don’t use JRcuber use “pockets”
use "brodythecuber"
Colorfulpockets is cringey, Brody is annoying and clickbaits
Pigiesrool exactly
OGCrimson well at least you get 5% of and your not supporting JRcuber (Jerk-off cuber)
@@cubert8880 he uses scs
To be fair you need to check the wording you merely asked them if they had the ability to draw one, they just answered your question. To have a better chance you could have said, "may I have a drawing of a firebreathing penguin, you can put it in the box" or something like that.
8-10 days for shipment for the new cubicle custom.for me i took 1 day to ship
How many hard drives do you have on the side? That looks like almost 20TBs. I have a drive like that and I use it as a NAS
DeepCubed To the left was 32TB. I just recently ordered 68 more TB that I’m putting in a ThunderBay 6 RAID box.
cyotheking Holy crap
WOW! I’m jealous lol
@cyotheking which Raid level will you go with?
@@DDHDTV I'm planning to use RAID 5. I know there's a bit of controversy about it in terms of how well it rebuilds, but I'd say the vast majority of professional editors I know use RAID 5 and have used it for ages. I also keep backups that aren't at my house in case my house burns down. So even if the RAID failed to rebuild, I'd still have backups of those files.
My Angstrom Huanglong M came with so many air bubbles. EVEN I could do better. Sadly, I requested for a logo change on green, which I have seen many people do, was denied. After I did 100 solves to break in the cube, and it popped 7 times. I have a light turning style btw. I will try speedcubeshop later.
A Huanglong with Gravitas, DNM-37 and light magnets? Sounds like a lubed fidget spinner to me... how did you control that?
EDIT: and Lubicle black.. Does it spin endlessly when you set it down on an angled surface?
Gravitas actually slows down the cube because it is thick like Vaseline. The Huanglong is my main and I have basically the same setup, as long as you put enough lube the cube will not be too fast.
Um it’s dnm 37 dude
@@c4-turtle984 I used to use vaseline in my Rubiks cube :(
*Standard magnets
@@willgregor8043 Standard magnets are pretty much light magnets
Regarding 11:00 ~, part of the fact that the price was only $10 more is that you got stickerless- they charge around $10 just to resticker a cube
Edit: oh NVM you talked about that
Hey Chris i received my package from the cubicle but I got the wrong puzzle. I've been trying to contact them but no one's responding
How long has it been and where did you contact?
@@cyotheking it's been about a week now and I contacted both sites
I messaged them on instagram today
can you please suggest me some piece lube for the cubicle custom rs3m 2020 ..i want my cube to be very fast and smooth at the same time cntrollable
I definitely agree with Chris on Cubicle Custom. It's a great service that gives you a lot of flexibility to customize your cube.
Why do you use 24fps? I don't think that's the right framerate for cubing videos. 30, or preferably 60fps would be better.
24 fps is standard for film. Never use 60 unless it's for slow motion, it looks too smooth and not life like. If you do all of your videos in 60 then you need a camera that can shoot higher fps than 60 for any slow-motion
Why did you not video yourself at Fargo fall 2018 just wondering
5:05 "Freddie Mercury" what the famous singer
Nice video Chris!
Just received my YJ MGC 3x3 its my first magnetic cube . My question : is there alternative to lube my cube? Not the ones they sell in cubes market , something to find home or buy from walmart.
Enigma You can buy Traxxas 50k from Walmart I believe - it’s for remote control cars but it works well in cubes just the same. It won’t be as good as Angstrom and Cubicle lube but it’s still great. You just have to make sure you don’t put too much in it or else it’ll slow down your cube. Or you could just order it from amazon for under $10. Cubicle lubes are still the best tho
@@jral6395 thank you.
You asked for a fire breathing penguin, I asked for grass...
The only problem I have with the price is $10 for stickers
I don't think it's likely, but would they have recognized your address?
Isn't cubicle labs back on the new website?????
Are those external hard drives? 8:23
Yup!
Hmmm let me estimate... 39 tb??
The only reason you didn't get a fire breathing penguin is that you didn't tell them to send it.
did anyone try emailing macky johnson
Did u notice that on the card it said Freddie Mercury forged signature boi
why cubicle custom does not have 356R?
They don't customize budget cubes
@@StevenWintringham Little magic is a budget cube and also the mgc and mf3rs2 they customize it because it has a lot of potential. 356R is a budget cube too and has a lot of potential.
@@migzy6931 let me rephrase that. The other inexpensive cubes for which a customer is in is available are all widely considered grape Cubes, but I don't know of any notable cubers that use the R
Is the cubicle custom logo a sticker?
Hey Olson !
Do you have any tips to get faster at 3x3 ?
I average around 18 seconds and I use CFOP. I use 2 look OLL and I don't know G and R perms of PLL. I learned CFOP 5 months ago .
Is the 356X your new main?
If so what ges and GM's do you have in the cube
Any idea when other cubes (other than 3x3) will be released?
What timer do you use?
Cstimer.net
Thanks
I always use discount code "pockets" since I started buying from the cubicle.
but why would you use incognito?
What is the size/make of that monitor? Looks really nice.
Carter Bitz Cubing Acer Predator x34p
Cyo what other comps are you going to?
Great video 👍 😀
I know that you’re not participating in it, but are you going to West Branch 2019? (Cause Sarah’s going)
Brainleeiac's World I forgot to register :/ doubt I’ll be there
You got the cube on my birthday
You know the cubicle moved websites right?
What happened to the color neutrality????
All the way back when I first heard the cubicle announce cubicle custom "Customize your own cube", it made me think that they added the ability to customize any WCA NxNxN cube from the cubicle, so I thought I would be able to do that to any cube I wanted, but, unfortunately, you can't, I wish at least you could do it to any budget 3x3 that they have. Just disappointed that the cubicle has not been adding any more cubes to Cubicle Custom.
Is that a gan 345 for your logo
How do you get that camera angle? I’m wanting to do more professional looking videos but I can’t seem to get my camera like that
Just a tripod very close to my table pointing down.
hi chris I remember seeing you at Fargo fall do you remember me im that short Asian kid that asked you to critique my solve
The screen is way too big and the words are super small and I can't see no nuts
Wait... 20$ for magnets?
$20 for magnets+labor of install.
DNM-37 in a Huanglong? Jeez, that would be way too fast for me.
I feel like the new lube service is a little pointless. I'm one of the people that owns most of the cubicle's lubes and likes to set up my own. I think that who don't set up their own cubes would have no clue how to use the service, as they would have no clue what lube combinations work the best to fit their turning styles, and they would probably end up picking a preset. This basically means that the old set up would do the exact same thing, just for at least $10 cheaper. People like me who understand what different lube combos do have no use for the service. In short, I can't really figure out what type of person benefits from this.
Cyo's address is still on there?!?! which can sort of give clues
Doesn’t your card have your name on it
the font is so small
I never order cubes... 😢
Don't you still work for the cubicle?
ModdedDarts I do!
I mean, you probably used your personal address so if they're not dumb, they'll realize you were ordering that cube.
So they could really well purposely make it better than the others they send.
But they didn't respect the approximated processing time
My only address that is currently logged is my old home address which was my moms, not my current apartment.
So they all know where he lives kind of creepy
Noah Gibson Retailers are obliged to for an obvious reason
cyotheking
Okok
@@N04HB0T I highly doubt any of the employees recognize my address.
I only used all different information because I knew people would complain otherwise. There's hundreds if not thousands of orders and addresses that come in a day. A random cube maker in pro shop isn't going to just recognize my address out of the blue. Especially since I don't place orders.
What timer do u use
He use Cs timer
Woah your screen is like 3 times the size of my computer screen
Honestly i really wanted to see a fire breathing penguin 🐧
Orders a custom cube built for purpose and receives an unevenly tensioned cube.. Eek!
I've had a pretty bad experience using cubicle custom. I ordered a Yuxin Huanglong from them that was black but they sent me a stickerless version that was horrible and required my own setup to get good. Has this happened for anyone else?
Why didn't you contact customer service to get the proper cube?
@@cyotheking I didn't have the time and I thought that for as long as I waited everything would have been completed correctly the first time. But its no big deal and thank you for the suggestion if I have future issues.
Yup I went to speedcubeshop.com instead
They can make a fire penguin but they dont have to
Dang! that is a nice desktop what is it?
NHCuber A mac of some kind. It's running MacOS.
A custom built Mac.
*incognito mode intensifies*
nice incognito ;)
hi
Cool
Nice
Good vid Chris! 🤓🤓🤓🤓
you get so loud at 2:19 lol great video though!
nice
When it's supposed to to be premium but it's unevenly tensioned
what a rapid typing
Nice Video
I bet the stickering person was relieved
He Went Incognito 😏😏😏😏
You should do some podcasts.
Logo kinda looks like Firefox.
cubicle custom is like cubicle hacker shop
Sup
The only downside about cubicle custom is the price increase from the cubicle premium.
He is in incognito
HMMMMMMMMMMMMM🤔🤔
maybe freddie mercury was the fire breathing dragon
The ultrawide omegalul
Hey that’s my name.
Macky Johnson strikes again
Incognito 😏
Please make a video addressing how poorly the cubing community has handled Yushengs record. If anyone can stir up this community its you.
Ewww incognito... That doesn't cover you up from the website. it just makes ur history clear as u surf in the internet with incognito
Incognito (Lenny)
Hentai
Icestrike Cubing geez dude lol
@@twistiicuber1055 lel
Yay Im number 490!
Incognito......Kowalski analysis
Eh that crapy keyboard sounds!!!
Good until the lube drys out...