50k is my favorite lube, i have a lot of other lubes but this is my favorie one, it makes the cube more stable, easier to control, slower or faster and extremly soomth, and it aslo last a really long time
The only lube I’ve ever tried is 50 k and I love it. It is all you need. Start with one drop and from there you can keep adding small amounts to get your cube where you like it
I like to use 30K on the core and a mixture of 30K, DNM-37, and Speedy on the pieces. This lubing method makes your cube quite fast after a bit of break-in and is very smooth.
Here's my opinion: I've used four lubes: Traxxas 30k, DNM-37, Lubicle Silk, and Martian. Traxxas is very good for the core, but I normally use it for the pieces. If used correctly, it can give a very smooth feel and potentially make your cube even faster, but if you put too much of it in your cube, it gums it up and makes it really sluggish, so don't be too generous with it. DNM is awesome; I ran out in a matter of months due to me using it so often. Just 1 drop makes your cube a lot faster, which I personally enjoy, and DNM lasts a while, too. In my experiences DNM has typically lasted me around two weeks. Silk is pretty similar to DNM as it also speeds up your cube. It also makes it feel a lot smoother, and I'd normally use it if my cube feels a bit dry. Martian is apparently one of SCS's fastest lubes, but it honestly doesn't do too much. It's slower than both DNM and Silk, but Martian still does make your cube a bit faster. You need to put in about 3-4 drops of Martian in order for it to compare to just 1 drop of DNM-37. If you don't really like super fast cubes but still don't want anything super sluggish, Martian works for that.
DNM-37 is water-based while Martian is silicone based and I think is less than weight 0.1 so that it lasts long as silicone-based lubes lasts longer than water-based lubes. Martian use to be the fastest out of the Cosmic Lubes line but then just made an even faster one recently which is called Lunar.
omg thank you this is exactly what i was looking for, i have an mf3rs and from what i have heard 30k matchs what i want perfectly but i don't know if i should put it in the core or in the pieces.
So obviously as a SCS sponsored cuber I'm biased, but their Cosmic Lube line is really good, especially Martian and Galaxy! They are so nice, and they last quite a long time! But not being brand specific I really like weight 1-3 best. Good video Chris!
I only use 2 lubes, DNM and silk, but that's enough for me. If a cube is feeling dry or slow, I put 1-2 drops of silk, and then if I want it to be faster, I add 1-2 drops of DNM and this creates a nice, smooth and semi-fast cube which I really like.
I just wanted to say THANKS. I started ROUXbing 14 months ago at the age of 50 and a lot of this stuff is new to me. My cubes were dry as hell! I sought advice from the young cubing masters of YT and found you...again. I studied this video and tried to understand the concept...watched a few other videos...found a local hobby shop that had some lubes matching your descriptions. I played it smart by disassembling, cleaning, mostly reassembling and VERY lightly lubing (a drop) on a few very specific internal areas. Broke the cube in...wiping off any excess...the first cube was the worst since it was...my trial and error cube. Once again...THANKS. I now have two really nice cubes and my times are dropping. 3 New PB singles standing at 31.19 - almost sub-30; that's my next goal. All of my averages are dropping, too. I can't give all of the credit to the lube but it does help, big time!
My PB Single is 26.76 My Ao5 is 36.34 My Ao12 is 38.76 My Ao50 is 40.77, dropping, just not at slow as Ao100 My Ao100 is 42.76, still dropping cubepb.com/user/232689 Any yours?
From what I have been able to learn, there aren't anywhere as many algorithms to learn with ROUX if you want to really drop your times. I don't expect to ever compete with the young guys/kids but the simple thought of continuously improving my times and maybe competing (once) keeps me going. I met one of my goals..Sub-30. Time to set some new ones.
When I get a new cube, I immediately wipe the pieces and drop in two drops of Lubicle-1. It fills in the cracks of your puzzle and makes the break in process before you lube it all out much easier. Break in with 50-100 solves so the Teflon can fill in the cracks. Then I do Lubicle Black on the core and a touch of Weight 5 on the pieces. Break that in, and add Silk or DNM-37.
I've used weight 3, weight 5, Maru Lube and Silk to lube my cubes. Usually I use weight 5 on cores or if I want to slow cubes down, I use a mix of weight 3, maru lube, and silk on the pieces. Usually I put weight 3 on the corner base/bottom of the pieces, maru lube where there is the most contact, break it in for a bit, then after a few solves add a drop or 2 of silk. Sometimes I skip out on one of the 3 lubes for pieces if I like how it feels after putting each lube, but usually I use a mix of them.
I loved this video! It was VERY well set up and just amazing! I have some Gan Magic Lube and Qiyi Lube as well. The Gan Magic is sooooo good to set up an SM with. All I had to do to make my SM amazing was: 1. Unbox 2. Lube with Gan Magic Lube 3. Done.
Oh hey Ender gaming we meet again 😂 I replied to your comment about the MGC elite if you remember😂 Do you have Martian lube? Because that’s all I have and I really want to know how these cubicle lubes perform in comparison with that I’m trying to find a lube that is controllable to slow down my little magic but all the lubes in SCS are sold out 🤷♂️ Would be great to know a little about premium lubes too if anyone of you have them
My local RC shop didn't have Traxxas so I use TLR differential lube, 50000 and 15000. The lighter one is great for a cube you don't use much so you don't want to spend ages breaking it in. For a quick lube job I just put a couple of drops of 50000 between the pieces, if I want to do it properly I use a bunch of 50000 on the core and tracks plus some 15000 between the pieces - this particular approach has made my NP Zhanchi feel almost like OP which delights me :)
I use weight 3 on the core, weight 3 on the tracks and a mixture of weight 1 and 2 in the pieces. the end result is a bit of a soft but fast feeling. Downside is that the cube can get uncontrollable. You must try this way. It is really good
I don't have lube, but if I got some, I would probably get silk or dnm, because with dnm, you can have a fast cube, which I love, and with silk, it makes the cube feel softer, which I like very much. I'll probably put both in my cube.
When you were talking about Lubicle Speed, it reminded me of what Damian Bias said to me at Worlds 2017. He told me that people would laugh when he would say "I slow my cubes down with Speedy"
i like lubicle one because you can apply it differently for different feelings putting a bunch on a track will make the cube really smooth and medium speed just dropping it inside will adjust the cubes speed to make it medium from any speed i do also like silk, 10k and dnm
The premium lube sampler from the cubicle is a great start! for 10 bucks you get silk, lubicle 1 and dnm, and i think you get about 60 drops of each which is plenty to start with.
My main is a Gan SM with Gravitas on the tracks and dignitas on the pieces. I use yellow nuts with Lubicle Black and Weight 5 on the core. Some of the Lubicle Black gets on the pieces, so the cube is very controlable, but smooth. It's just perfect for me.
My favorite lube dnm and silk because i have a pretty old cube and when i put 1 drop of dnm it wss amazing. I like silk because it gives a really smooth feeling it just make me feel really good when i turn a cube that is lubed with silk
A little secret only a few cubers in the cubing society know.Maru lube has been 'exposed,that it evaaporates after 1 day ,leaving a black sticky substance.Actually that is true.But that black substance is silicone which speeds up the cubes.So maru lube actually does not dry up in a day.it is a great lube.lets say you is at a competition.maru lube can lube your cube in a pinch .thanks for reading pls share dis😀
I used to usually dump a lot of light lube (Around the hundreds range in viscosity) from a local RC car store, and break it in, but not I just use whatever I'm sponsored with
Recently I bought a WuQue and DNM-37, but now I'm curious how Weight-5 would work in this cube so definitely it will be the next one Thanks Chris, I loved this video.
I don't have a favorite lube, but I use DNM, Speedy, and Lubicle 1. I put 3 drops of Lubicle 1 on a corner stalk with 1 drop of DNM. On the opposite corner diagonally of it I do 2 drops of Speedy, giving my cube a great feel.
The only 2 lubes I use are calvin high viscosity/Lubicle wt 5/any thick silicone (can't differentiate them) in most of my cubes, and silk which I use ocassionally and quite rarely. Works fine on 6x6 and 7x7, just need to break it in. My 6x6-8x8 are all set up with thick lube and they work totally fine.
Personally I use weight 5, angstrom gravitas, dnm, mystic, and silk Weight 5 for the core, gravitas on the tracks, and the others for adjusting the speed (i really like mysitc)
I use 50k and even a tube of 100k to enhance the feel/drag. When my cube turns too fast, I will wash my cube (stickerless) with dish soap and rinse it while doing the checkerboard pattern under warm/hot water. then I just pat as much water out of it against my jeans. This happens when I bring a cube to the movies so I dont have to watch the pre-roll ads.
I use a little traxxes 50k on tracks and springs.. break that in then add a drop or 2 of martian lube or silk. Break in. Then add one small drop of dnm 37..
i personny use silk on the tacks uf the pieces and silk+DNM on the outer layers . i would personally not recommend using dnm37 or any other water base lube it will just dry out very rapidly and make you cube slower
no i think that either maru an dnm37 don't last very long. Or at least they won't won't last as long as a silicon base lube and give a weird feeling to your cube with time.
I like lubicle black on the core, gravitas + silk on piece feets and gravitas + DNM or speedy on the plastics On gan cubes I replace silk with gan magic lube
can i lube bigger cube without taking apart. planning to lube my 7x7. iam using maru lube. so does it work if i drop 2 drops on each side in between corners ? is there any drawback lubing like this ?
Okay, first off, AMAZING video. Super informative, and I loved it. Secondly, I don't have much money, and my parents aren't super supportive of my hobby, So if I buy something, it'll have to last a while. Also the cubes I have are The Valk 3, and the Yuxin little magic, and I was wondering what lubes you would recommend for those cube. So in conclusion, what do you think I should get? What I thought was maybe Traxxas 50k, and speedy, what do you think?
I buy Traxxas 10k 30k 50k 3pk for ~$20. I'm not a speedcuber and kinda more for the "meditation" aspect of it (think Wushu as speedcubing, while I would be Tai Chi). I only buy MOYU AOFU GTs and I just buy lube so I don't hit snags and to hopefully prevent lockups. I usually tighten the centers so there's not much cause for movement. Because of this, there's not much space for the cube to correct itself and it becomes stuck or even worse a center piece will break and the cube crumbles. Nobody so far has told me how to unlock the "dislocated" cubee without having to take it apart. I was thinking maybe to remove the center screw on the cubes face where the out of whack cubee is located. I was also wondering what happens physically to silicone oil as time and cube use goes on (when lube "drys" up).
![เป็นไปได้ไหม - WanMai [Official MV]](http://i.ytimg.com/vi/_6lZ6b3_7Vo/mqdefault.jpg)
What is your favorite lube and why!? :D
cyotheking gan lube because I have only it
50k is my favorite lube, i have a lot of other lubes but this is my favorie one, it makes the cube more stable, easier to control, slower or faster and extremly soomth, and it aslo last a really long time
Nothing cause I don’t have lube. LOL
weight 1 + dnm37
Cosmic Martian. Its just like silk but makes it way faster and smoother
1:26 weight 5
2:51 traxxas 50k
3:51 weight 3
4:26 lubicle speedy
5:57 DNM
7:15 silk
Like so others can see
(Yeah I know, begging for likes)
Dark Greninja Thanks
Idc if you are pleading for me not to give you likes... this was helpful
Like beggar
Thank you so much
Tysm!
Cooking oil for the win my dudes
PROJECT PIANO no vaseline
I’m saving that for something else
PROJECT PIANO 👌
water is better then all the ones yall mentioned
why not sand?
Intro (0:00)
SILICONE-BASED LUBRICANTS
Weight 5 (1:26)
Traxxas 50K (2:50)
Weight 3 (3:50)
Speedy (4:25)
WATER-BASED LUBRICANTS
DNM (5:55)
Silk (7:14)
Satification (7:45)
Summary (8:00)
Suggestions (8:18)
silk is silicone
damn your lighting has improved by like 1000%
No reply arisandra comment?
I've been waiting for this vid since "So. Much. Lube." came out over a year ago!
I agree with your traxxas 50k reasonings! The only reason mine ran out was that a crack in the bottom was created and it leaked everywhere lol.
Yup exactly 😂😂
Same problem here... Made a mess
same happened but for my weigh 5, lost 25 millimeters, and it leaked onto my megaminx. It took a week to break it in lol.
The only lube I’ve ever tried is 50 k and I love it. It is all you need. Start with one drop and from there you can keep adding small amounts to get your cube where you like it
I like to use 30K on the core and a mixture of 30K, DNM-37, and Speedy on the pieces. This lubing method makes your cube quite fast after a bit of break-in and is very smooth.
Pro Shop is one of my favorite setups.
Make a video setting up the cube, that would be super helpful.
yeah please
*_WEIGHT 5 IS SO THICC_*
CooLite *SCS WEIGHT 8 IS THICCER*
Cubing Stapler True.
SCS WEIGHT 9 IS EVEN THICC R
Magnix SCS WEIGHT *insert my body’s weight* IS 10000000 TIMES THICCER
Sir the doctor is that way --------
8:31 I took a Screenshot
Yo same
Here's my opinion:
I've used four lubes: Traxxas 30k, DNM-37, Lubicle Silk, and Martian.
Traxxas is very good for the core, but I normally use it for the pieces. If used correctly, it can give a very smooth feel and potentially make your cube even faster, but if you put too much of it in your cube, it gums it up and makes it really sluggish, so don't be too generous with it.
DNM is awesome; I ran out in a matter of months due to me using it so often. Just 1 drop makes your cube a lot faster, which I personally enjoy, and DNM lasts a while, too. In my experiences DNM has typically lasted me around two weeks.
Silk is pretty similar to DNM as it also speeds up your cube. It also makes it feel a lot smoother, and I'd normally use it if my cube feels a bit dry.
Martian is apparently one of SCS's fastest lubes, but it honestly doesn't do too much. It's slower than both DNM and Silk, but Martian still does make your cube a bit faster. You need to put in about 3-4 drops of Martian in order for it to compare to just 1 drop of DNM-37. If you don't really like super fast cubes but still don't want anything super sluggish, Martian works for that.
DNM-37 is water-based while Martian is silicone based and I think is less than weight 0.1 so that it lasts long as silicone-based lubes lasts longer than water-based lubes. Martian use to be the fastest out of the Cosmic Lubes line but then just made an even faster one recently which is called Lunar.
MyWiFiSUX Yea, that's probably the reason why Martian isn't as fast as DNM.
omg thank you this is exactly what i was looking for, i have an mf3rs and from what i have heard 30k matchs what i want perfectly but i don't know if i should put it in the core or in the pieces.
Godly MangoMC You're welcome!
let me make sure i got it right, traxxas 30k in the core is good but it is better in the pieces?
So obviously as a SCS sponsored cuber I'm biased, but their Cosmic Lube line is really good, especially Martian and Galaxy! They are so nice, and they last quite a long time! But not being brand specific I really like weight 1-3 best. Good video Chris!
I'm neutral between the two, and the scs cosmic lubes are awesome.
SCS weight 1-3 or Cubicle weight 1-3?
cubicle, since I haven't tried scs
I'm talking about SCS Weighted lubes, but they are probably the same.
JCB ShortFilms late to the party but scs weight 1 is actually around cubicle weight 5 viscosity for some reason
Could you do an updated version of this? 2019
Handon Lager yeah and include SCS lubes for reference
@@nglawrence5057 late reply but he's sponsored by the cubicle
I'm in with Chris on Weight 5, I absolutely love it too. It makes my cube so much smoother, and even faster once I break it in
Just let cubicle set it up for you. No need to buy lube. Problem solved!
Until it runs out 😉
Endorsement
Until it runs out both your money and the lube xD
Or get a cosmic cube
Dana Yi after a few months you need to re-lube the cube. You can't send it back and have the re-lube it for you.
Thanks Chris! As a beginner speedcuber, I’m starting to get into lube.
I only use 2 lubes, DNM and silk, but that's enough for me. If a cube is feeling dry or slow, I put 1-2 drops of silk, and then if I want it to be faster, I add 1-2 drops of DNM and this creates a nice, smooth and semi-fast cube which I really like.
use weight 5 to remove spring noise
I just wanted to say THANKS. I started ROUXbing 14 months ago at the age of 50 and a lot of this stuff is new to me. My cubes were dry as hell! I sought advice from the young cubing masters of YT and found you...again. I studied this video and tried to understand the concept...watched a few other videos...found a local hobby shop that had some lubes matching your descriptions. I played it smart by disassembling, cleaning, mostly reassembling and VERY lightly lubing (a drop) on a few very specific internal areas. Broke the cube in...wiping off any excess...the first cube was the worst since it was...my trial and error cube. Once again...THANKS. I now have two really nice cubes and my times are dropping.
3 New PB singles standing at 31.19 - almost sub-30; that's my next goal.
All of my averages are dropping, too. I can't give all of the credit to the lube but it does help, big time!
Robert D In Tulsa how's your times doing now?
My PB Single is 26.76
My Ao5 is 36.34
My Ao12 is 38.76
My Ao50 is 40.77, dropping, just not at slow as Ao100
My Ao100 is 42.76, still dropping
cubepb.com/user/232689
Any yours?
Robert D In Tulsa nice! Wish I learned roux as my first method. Seems easier than CFOP to improve. My pb is 17 and ao5 and ao12 is around 28 seconds
From what I have been able to learn, there aren't anywhere as many algorithms to learn with ROUX if you want to really drop your times.
I don't expect to ever compete with the young guys/kids but the simple thought of continuously improving my times and maybe competing (once) keeps me going. I met one of my goals..Sub-30. Time to set some new ones.
The thumbnail always makes me think that it's a cinematic video. Another great thumbnail.
The thumbnail looks very gorg af
ikr
Endless Battle blade of despair
Endless Battle scarlet phantom
You honestly look great in the face cam. The blend of bright neutral colors in the back looks great
When I get a new cube, I immediately wipe the pieces and drop in two drops of Lubicle-1. It fills in the cracks of your puzzle and makes the break in process before you lube it all out much easier. Break in with 50-100 solves so the Teflon can fill in the cracks. Then I do Lubicle Black on the core and a touch of Weight 5 on the pieces. Break that in, and add Silk or DNM-37.
I've used weight 3, weight 5, Maru Lube and Silk to lube my cubes. Usually I use weight 5 on cores or if I want to slow cubes down, I use a mix of weight 3, maru lube, and silk on the pieces. Usually I put weight 3 on the corner base/bottom of the pieces, maru lube where there is the most contact, break it in for a bit, then after a few solves add a drop or 2 of silk. Sometimes I skip out on one of the 3 lubes for pieces if I like how it feels after putting each lube, but usually I use a mix of them.
My favorite is compound x cause I really like how it makes cubes more controllable
Silicon lube is the best. Although I prefer the SCS silicon because there’s a bit more variety but you can go wrong with Cubicle silicon
SCS weight 5 makes my cubes feel kinda crispy after break in for some reason and I LOVE that!
MA Cuber hmm I like scs weight 6. I like the little bit more control.
I loved this video! It was VERY well set up and just amazing! I have some Gan Magic Lube and Qiyi Lube as well. The Gan Magic is sooooo good to set up an SM with. All I had to do to make my SM amazing was: 1. Unbox 2. Lube with Gan Magic Lube 3. Done.
I lubed my cube with water...
-based lubricants
lel
Oh hey Ender gaming we meet again 😂
I replied to your comment about the MGC elite if you remember😂
Do you have Martian lube? Because that’s all I have and I really want to know how these cubicle lubes perform in comparison with that
I’m trying to find a lube that is controllable to slow down my little magic but all the lubes in SCS are sold out 🤷♂️
Would be great to know a little about premium lubes too if anyone of you have them
S1S Pro probably very long
I legit did this and my MF3RS2 is all rusted out. Thank god the RS3M 2020 came out literally a week later.
@@bijandey5634 your a lucky guy
My local RC shop didn't have Traxxas so I use TLR differential lube, 50000 and 15000. The lighter one is great for a cube you don't use much so you don't want to spend ages breaking it in. For a quick lube job I just put a couple of drops of 50000 between the pieces, if I want to do it properly I use a bunch of 50000 on the core and tracks plus some 15000 between the pieces - this particular approach has made my NP Zhanchi feel almost like OP which delights me :)
I use weight 3 on the core, weight 3 on the tracks and a mixture of weight 1 and 2 in the pieces. the end result is a bit of a soft but fast feeling. Downside is that the cube can get uncontrollable. You must try this way. It is really good
I don't have lube, but if I got some, I would probably get silk or dnm, because with dnm, you can have a fast cube, which I love, and with silk, it makes the cube feel softer, which I like very much. I'll probably put both in my cube.
When you were talking about Lubicle Speed, it reminded me of what Damian Bias said to me at Worlds 2017. He told me that people would laugh when he would say "I slow my cubes down with Speedy"
I'm kinda a newbie and i wanted to buy a new lube so this helped a lot
i like lubicle one because you can apply it differently for different feelings
putting a bunch on a track will make the cube really smooth and medium speed
just dropping it inside will adjust the cubes speed to make it medium from any speed
i do also like silk, 10k and dnm
The premium lube sampler from the cubicle is a great start! for 10 bucks you get silk, lubicle 1 and dnm, and i think you get about 60 drops of each which is plenty to start with.
My main is a Gan SM with Gravitas on the tracks and dignitas on the pieces. I use yellow nuts with Lubicle Black and Weight 5 on the core. Some of the Lubicle Black gets on the pieces, so the cube is very controlable, but smooth. It's just perfect for me.
now thats a lot of lube in 1 cube
My favorite lube dnm and silk because i have a pretty old cube and when i put 1 drop of dnm it wss amazing. I like silk because it gives a really smooth feeling it just make me feel really good when i turn a cube that is lubed with silk
I personally use Weight 5 with DNM and Maru on basically all my puzzles, has worked well for a while now.
A little secret only a few cubers in the cubing society know.Maru lube has been 'exposed,that it evaaporates after 1 day ,leaving a black sticky substance.Actually that is true.But that black substance is silicone which speeds up the cubes.So maru lube actually does not dry up in a day.it is a great lube.lets say you is at a competition.maru lube can lube your cube in a pinch .thanks for reading pls share dis😀
I’m to broke to buy lube and don’t have knowledge about lube but you do have to clean that substance in the future right?
Weight-1 because it last long and no need to use any other piece lube.and for core weight-5
I used to usually dump a lot of light lube (Around the hundreds range in viscosity) from a local RC car store, and break it in, but not I just use whatever I'm sponsored with
That was a really informative video! Keep up the awesome work :)
I like silk, weight 5, and lubicle 1. I put them in my valk 3 and now it’s amazing!
This question is recurrent so thank's for your help chris 🤝
My lube setup on my Warrior W is Lubicle Black on the core, Weight 5 and Nebula on the tracks, and Weight 3, Silk, and DNM on surface area.
I’m getting my first cube soon and this is going to help a lot
Thanks for the suggestion!! Now I can prefer my favourite lube accordingly
I only use 50k and have a tendency of putting a lot in the cube it makes the cube feel softer and more controllable
Recently I bought a WuQue and DNM-37, but now I'm curious how Weight-5 would work in this cube so definitely it will be the next one
Thanks Chris, I loved this video.
I have trown away a thunderclap and quarter of a bottle of lube! Just because you said overlubing the thunderclap is good!
The dignitas container spills and leaks, if it were in a better container it would be my favorite
I don't have a favorite lube, but I use DNM, Speedy, and Lubicle 1. I put 3 drops of Lubicle 1 on a corner stalk with 1 drop of DNM. On the opposite corner diagonally of it I do 2 drops of Speedy, giving my cube a great feel.
The only 2 lubes I use are calvin high viscosity/Lubicle wt 5/any thick silicone (can't differentiate them) in most of my cubes, and silk which I use ocassionally and quite rarely. Works fine on 6x6 and 7x7, just need to break it in. My 6x6-8x8 are all set up with thick lube and they work totally fine.
1: weight 5
2: dnm37
3: max fleet
4: silk
Thank you for this! This helped me a lot!!
Amazing video Chris!
Weight 5 and silk. Use them both at once at the same piece.
My top 8 lubes:
1. Weight 5
2. Lubicle speedy
3. Lubicle silk
4. Weight 1
5. Angstrom Dignitas
6. Angstrom Gravitas
7. DNM 37
8. Maru Lube
6:15 put captions
silicon boobs
Very helpful for someone who has no clue about lubes, thanks
I use weight-5, Lubicle Standard, Traxxas 50k, Maru lube and DNM-37.
Personally I use weight 5, angstrom gravitas, dnm, mystic, and silk
Weight 5 for the core, gravitas on the tracks, and the others for adjusting the speed (i really like mysitc)
I use 50k and even a tube of 100k to enhance the feel/drag. When my cube turns too fast, I will wash my cube (stickerless) with dish soap and rinse it while doing the checkerboard pattern under warm/hot water. then I just pat as much water out of it against my jeans. This happens when I bring a cube to the movies so I dont have to watch the pre-roll ads.
Silk was my first lube
I use a little traxxes 50k on tracks and springs.. break that in then add a drop or 2 of martian lube or silk. Break in. Then add one small drop of dnm 37..
Thank you for the long but useful explanation
i personny use silk on the tacks uf the pieces and silk+DNM on the outer layers . i would personally not recommend using dnm37 or any other water base lube it will just dry out very rapidly and make you cube slower
You mean Maru. DNM-37 is engineered to last longer.
no i think that either maru an dnm37 don't last very long. Or at least they won't won't last as long as a silicon base lube and give a weird feeling to your cube with time.
Thanks for giving a list of good lubes!
I just got a traxxas 10k,30k,40k on Amazon when I started.
Traxxas sounds great, im gonna get it as my first real core lube!
how did it turn out? did you like it?
@@Teneab it's great! Make sure to use a small amount and break in first, before adding any larger amount. Cube stays perfectly smooth for months!
@@nottsoserious too late... i already ordered weight 5.
Apparently at SCS people love the Wushuang M with weight 3.
Nice lighting and nicely filmed please make some tutos on ur second channel about cinematography
Which part of the cube are the tracks? The white part of the Gan Air SM for example, is that it?
I like lubicle black on the core, gravitas + silk on piece feets and gravitas + DNM or speedy on the plastics
On gan cubes I replace silk with gan magic lube
I watched this video after I ordered my first lubes and I lithely bought exactly those 5 lubes
can i lube bigger cube without taking apart. planning to lube my 7x7. iam using maru lube. so does it work if i drop 2 drops on each side in between corners ? is there any drawback lubing like this ?
great video, this helped me chose which lube to buy
I LOOOOOOVE THE ANGSTROM LUBES PLUS DNM
this video helped a lot. I would like to know how to get traxxas 50k in smaller amounts.
Any recommendations for the Huanglong M?
How often should I lube my cube?
Weight 3 in the core + DNM on the pieces, with the occasional addition of Silk
Lubicle Silk cauz it gives a smooth and silky feeling (removes crunchiness)
I ran out of 50k
after how long?
Godly Mango weilong
Lol
Aulong did itt take? Probably took weilonger than my guess.
Can I use weight 5 on the core then a combination of speedy and weight 5 on the pieces?
This video is very informative and helpful, thanks!
Okay, first off, AMAZING video. Super informative, and I loved it.
Secondly, I don't have much money, and my parents aren't super supportive of my hobby, So if I buy something, it'll have to last a while. Also the cubes I have are The Valk 3, and the Yuxin little magic, and I was wondering what lubes you would recommend for those cube.
So in conclusion, what do you think I should get? What I thought was maybe Traxxas 50k, and speedy, what do you think?
50k and speedy would be good starts!
Okay, thanks!
What about traxxis 30k?
I accidentally got a bit of melted ice pop in my cube. How to fix?
clean ur cube
RIckYShArk thanks!
I buy Traxxas 10k 30k 50k 3pk for ~$20. I'm not a speedcuber and kinda more for the "meditation" aspect of it (think Wushu as speedcubing, while I would be Tai Chi). I only buy MOYU AOFU GTs and I just buy lube so I don't hit snags and to hopefully prevent lockups. I usually tighten the centers so there's not much cause for movement. Because of this, there's not much space for the cube to correct itself and it becomes stuck or even worse a center piece will break and the cube crumbles. Nobody so far has told me how to unlock the "dislocated" cubee without having to take it apart. I was thinking maybe to remove the center screw on the cubes face where the out of whack cubee is located. I was also wondering what happens physically to silicone oil as time and cube use goes on (when lube "drys" up).
This helped a lot, thank you
If i wanna buy a lube which can be directly applied to pieces....should i buy traxxas 30k???
I use weight 2 and weight 5 and if a cube is way to fast, I will use traxxas 1000K.
Thanks Chris
For this video 😊😊
Can you go over the new premium lubes, please? :0
I used cooking oil an vaseline for the spring and scrue
really nice thanks! :)
I'd like to know what lube does Cubicle.us put in their Cubicle pro-shop lube service for standard cubes (not with the premium service)
There is lubicle speedy, weight 5 or 3, cant remember, qnd maybe dnm 37. My guess actually