Like some others said. Charged air cooler. Fuel draws from the passenger side. If you were low on fuel you could pull over on the side of the road. Let the truck lean to the right close to the ditch. The fuel would run from the left tank to the right one. Close the crossover valve and have more fuel in the right side. Then roll on until you could refuel.
I love when you two get in the zone when you start cracking on each other you're really are a great team even how you feed of each other trying to analyze a problem. Makes your channel one of a kind pretty much the best one going.... ty again..
Hank says: Wiley, i went to home depot two days ago. And brought me a craftsman Cresent Wrench, and came with a magnet If i drop the Cresent Wrench, it just springs right back into my hand, i never lose it. 🤣
Thanks for another great video Hank and Wiley. This gentleman had a lot of trucks at one time. 51 on the road is a lot. This truck is kind of used so to speak but with a little TLC probably could be used again. You did not get it started but will wait for part two. My guess is it will start and run fairly good. Be looking for part two. Thanks for everything. The Iowa Farm Boy.
I drove that mack back in th 90s, Boss Larry was a piece of work, He had a cabover International I drove to...wpw I hate to see that truck in that shape...Brings back so many memories....
I love the videos brother. I would love to see a walk around with all the cabovers. It would be cool for y'all to try to crank those up as well. Also did you ask the gentleman with the prosthetic if he knew of any resources or organizations that might help me out. I'm the amputee who emailed you a couple weeks ago. Thanks guys keep up the great content.
@@HamiltonvilleFarm oh wow if he emailed me I might not have recognized it. If he did will you please tell him to reach back out. I’ll be careful about deleting emails. I’m sorry and I really appreciate it.
Hey guys, Hank you need to stop at a truck stop and ask the fuel island person if they have a broken fuel in ground tank dip stick and use that for a fuel dip stick
Hank, Wily, I know ya'll really love these trucks. You know how I know? CAUSE THE SPARKS ARE ALWAYS FLYIN! Hey! 🥁 😂😂😂 Thanks I'll be here all week. Ok....time for Part 2!
E7 is a later series engine than a E6, they produced various HP engines of each series, They made 2 valve and 4 Valve E 6 motors, that one is a 2 Valve E6 I believe.
Hi Hank Dale Popiel my neighbor up the Street in Tupelo,Mississippi had a 1982. Mack mm6 300 with the same set up i had to help him keep it running boy his daughter loved that. Truck one day his daughter came down to my house with tears coming down her cheeks she gose i have sad news my dad died i had to go stay with her all she wanted to do was go for a ride in her dads Truck i told her nicely i didn't have a CDL she understood me
▶Part 2 here: th-cam.com/video/YOiCAjOjIu0/w-d-xo.html
8:00am good morning Mr Hank and Mr Wiley
Why is part #2 private?
Yeah what the heck where’s part 2
Tomorrow
“How much can go wrong in four years?” 😂
That joke will not be beat.
Lol. True.
Like some others said. Charged air cooler. Fuel draws from the passenger side. If you were low on fuel you could pull over on the side of the road. Let the truck lean to the right close to the ditch. The fuel would run from the left tank to the right one. Close the crossover valve and have more fuel in the right side. Then roll on until you could refuel.
If it turns. It will run. ❤them old Macks.
CAC- Charge Air Cooler and pyrometer is for the exhaust gas temperatures (egt).
I love when you two get in the zone when you start cracking on each other you're really are a great team even how you feed of each other trying to analyze a problem. Makes your channel one of a kind pretty much the best one going.... ty again..
In Germany/ Bavaria you wont find that amount of old trucks that stood for 20 years 😂 God bless america for that content, love it ❤
Hank says: Wiley, i went to home depot two days ago. And brought me a craftsman Cresent Wrench, and came with a magnet If i drop the Cresent Wrench, it just springs right back into my hand, i never lose it. 🤣
Please show that k 100 in the back ground buddy
I know that it's not a 238 but that was the best engine Mack ever made
You Two guys are the perfect pair.
E7 wasa renalt with a common rail injector system usually a 400
We need to here a few crazy stories from your time in the air force. Thanks for your service Hank!
Another great video from you!, I enjoy all’s!, thanks again for posting!
Thanks for another great video Hank and Wiley.
This gentleman had a lot of trucks at one time. 51 on the road is a lot.
This truck is kind of used so to speak but with a little TLC probably could be used again.
You did not get it started but will wait for part two. My guess is it will start and run fairly good.
Be looking for part two.
Thanks for everything.
The Iowa Farm Boy.
CAC = Charged Air Cooler . EM6-300 . T676-300 maxidyne . aka Coolpower engine.
The Cabover bulldog is an MH model.
Mack
Another great video thanks for sharing and bringing us along. You and Wiley are awesome !!!!
That would be a 300+ or a 350 Mack engine since it’s intercooled, those are hoss trucks, glad you guys share the same love for Mack’s that I do lol
The Customer Adaptation Center (CAC) is the post production modification organization for Mack Truck's Lehigh Valley. Operations.
mack made some beautiful cab over fire engines though, we just retired out 1976 from mccloud fire
Less hanken and more cranken..When you all have the long videos,I learn more from you all..
I drove that mack back in th 90s, Boss Larry was a piece of work, He had a cabover International I drove to...wpw I hate to see that truck in that shape...Brings back so many memories....
That Cabover Mack were called Cruise Liners & theyre Very Rare & collectable Now
I love the videos brother. I would love to see a walk around with all the cabovers. It would be cool for y'all to try to crank those up as well. Also did you ask the gentleman with the prosthetic if he knew of any resources or organizations that might help me out. I'm the amputee who emailed you a couple weeks ago. Thanks guys keep up the great content.
he was supposed to get back to you
@@HamiltonvilleFarm oh wow if he emailed me I might not have recognized it. If he did will you please tell him to reach back out. I’ll be careful about deleting emails. I’m sorry and I really appreciate it.
I drove a R Model 300 hauling asphalt for years, not the most powerful but it never did break
Thanks!
@tracyannbanks123_ Thank you, young lady
@@tracyannbanks123_ Florida and live with my brother
Thank you sir
Hey guys, Hank you need to stop at a truck stop and ask the fuel island person if they have a broken fuel in ground tank dip stick and use that for a fuel dip stick
If they broke the stick, one end or maybe both are floating around in the fuel tank underground.
Thank you Hank can't wait for part two appreciate you buddy 👍
Excellent video Wiley :) and Hank :) yes lots truck play with to get started for sure !
The Mack is the first truck i drove in the Cdl school up in Massachusetts in 2003.
Like to see it when the restoration is finished. See from Thailand.
Hank, Wily, I know ya'll really love these trucks. You know how I know? CAUSE THE SPARKS ARE ALWAYS FLYIN! Hey! 🥁 😂😂😂 Thanks I'll be here all week. Ok....time for Part 2!
Lol
I’m interested in some of the cabovers, he has a few
I thought an E-6 was a staff sergeant Hank, LOL.
Good Morning Gentleman, I hope you have a great weekend and a fantastic day today ! 😊
I'm on the edge of my seat waiting to hear that old Mack fire up
It is 10:45 am this morning in AZ !
Good job. As always love it. God Bless
Whiley keep an eye 👁️ Hank, he thinks he can see fluid levels on a chrome magnet rod, help him out buddy😁😂
My guess for the CAC.stands for cold air charge
Another great video and those cabovers would be nice to see come back to life. The turbo runs to an air to air
🤣🤣🤣 Y'all are a mess!! Another great video, God Bless y'all and stay safe!! Keep up the great work and Thank You for the laughs!!!!
That is a exhaust temperature guage also known as a pyrometer. Is used to monitor the temperature of the exhaust so you dont heat stress the engine. 😊
I just love these.. Mack videos wiley and hank.. Ya'll good at what ya'll does
I like that mack cab over
Nice...yall are awesome 😎 have a blessed day ..im offto find part 2
Tomorrow morning
@@HamiltonvilleFarm ahh 10-4
Great job and God bless y'all
e 6 e7 e9 are the diffrence in the horse power and how much emission there is
Awesome video. Looking forward to part 2
usually a 10 speed mack had higher gear diffs 38 boggie suspension
The cabover Mack I drove had a 300R with a Fuller 10 speed in it. Back in the day, they were called 5 over 5 duplex.
Look amazing truck n cabovers
Boost is turbo application or psi
Charge air cooler is what that stands for. Cools the air from the turbo before it travels into the intake.
gosh, I do love Mack Trucks, wonder if he will part with it
Awesome video guys
Snakes snakes and more snakes! Great vid guys!! Love it!
Y'all need to market those natural Hamilton Farms fuel gauges
That CAC stands for control air cleaner not sure
Work on that farm tractor in front of that Mac.
It might run 🏃 the both of you have a great day
That ultra liner next door probably 350 x 4 valve
E7 is a later series engine than a E6, they produced various HP engines of each series, They made 2 valve and 4 Valve E 6 motors, that one is a 2 Valve E6 I believe.
Nice work.
Get Bruce Wilson for the boosting Hank! Watching in Edmonton Alberta
I love the old Mack
Good morning gentlemen,
Boa noite muito ótimo esse caminhão maravilhoso amigo
i personally love K/W W 900 S . AND IN A STRONG SECOND is the R MACK
A suggestion: bring a gas powered leaf blower to clean out and off the vehicles U bring back to life or part out!!
Cac stands for charge air cooler
Lots of room for activity in Hanks head 😂😂😂
That Mack would make a great fixer upper
Buen...humor.....😂
Thank you'll guy's I am from Florida Wally and Hank.
Good video hope she starts up for you
Hi Hank Dale Popiel my neighbor up the Street in Tupelo,Mississippi had a 1982. Mack mm6 300 with the same set up i had to help him keep it running boy his daughter loved that. Truck one day his daughter came down to my house with tears coming down her cheeks she gose i have sad news my dad died i had to go stay with her all she wanted to do was go for a ride in her dads Truck i told her nicely i didn't have a CDL she understood me
Don't worry about Willy's stomach, he has a built-in reserve
E-6 and e-7 are the engine families then there are horse power ratings for each engine
E-7is the predecessor to the E-6
This truck is an e-6
Hay Wiley you and Hank Can start the titanic. Calvin from Dayton Ohio.😎😎😎
air to air intercooler
It stands for charge air cooler
E os cabover???
CAC IS Charge Air Cooler.
That was like being hungry and finding out the restaurant was closed To be continued kinda leaves you hungry 😮
Bainbridge Ga
I almost unsubscribed, that mack cab over is one of my favorites! lol
lol.
How can you leave us in suspense? Now we can't do anything else, but wait.😢
Well that's not nice to be continued that's new then when I click on link to watch part two it says it's a private video ..what's up with that.
Tomorrow
love macks an the old wc whites
E6 is a 350 and E7 is a 11.9 letter in line 6 cylinder turbo charged
Why don’t you bring your leaf blower so you can blow the crap off the engine before you work on it?
What can go wrong in four years lol ... I hear ya !!
So my ears didn't hear wrong Hank was the battery Gopher 😂😆
Charge air cooler!
Charge air cooler
12:20, People who like and watch football in general have a few screws loose.
Making oil
@HamiltonvilleFarm CAC = Charge Air Cooler
Did You Ever Sell Black Betty?
i made a video about what happened to it. Make sure you have your notification bell turned on so you don't miss any videos.
@@HamiltonvilleFarm I Will Go & Watch The Video
I drove one of those cabovers