That's a nice setup. I just down upgraded my box. I had a us general 6 drawer full bank box. I wanted the slide top from snap on but couldn't afford it, well couldn't bring myself to pay $2,500 after tax for it. My dad decided to make me jealous and buy it and use it in front of me daily. Well eventually Cornwell came along and had a brand new scratch and dent slide top that a pallet jack hit and scratched the handle at the factory. It marked the price down from $2,250 to $1,650 plus I traded my 6 drawer us general for $350, so I got a matte red Cornwell slide top brand new for $1,300 over $1,000 less than my dad paid. So I feel like I got the last laugh. I say I down upgraded because it's a 5 drawer so I lost a drawer, but got two small slide top storages. It worked out though the two slide tops and top of the box took care of two and a half drawers, so with some organization I managed to gain space.
That’s a very nice cart and great tools. I like how the wrenches are just stacked on their side to save space. I also watched your toolbox videos. Will you upload again?
Holyshit man you really have that tool cart pack down. Just goes to show you, you don't need the biggest most expensive tool cart to put a lot of stuff in it
Roll carts can surprise you on the capacity. I went from a Cornwell cart similar to this one to a 54” with hutch but honestly I don’t gain very much space at all. Over all I gained one long full width drawer and one real deep drawer and maybe one other 2/3 width drawer by the time I moved my tools over there wasn’t much empty space to expand left in the box which was a little disappointing.
Absolutely. I just got a Mac service cart but with the full folding top, I was unaware these sliding tops existed so I called the Mac truck guy and told him I was to exchange it for the sliding lid lol
@@beardedtoolmonger3131 4 swivel casters gives it much better mobility. That's the reason why I choose this cart. In my opinion, this cart is better than snap on KRSC series as an utility cart.
Bearded Tool Monger thank you am a tow truck driver most of the time an in the flat bed or battery truck but some times am in the wrecker to pickup med size mail truck I have pull a drive line tks
That's a nice setup. I just down upgraded my box. I had a us general 6 drawer full bank box. I wanted the slide top from snap on but couldn't afford it, well couldn't bring myself to pay $2,500 after tax for it. My dad decided to make me jealous and buy it and use it in front of me daily. Well eventually Cornwell came along and had a brand new scratch and dent slide top that a pallet jack hit and scratched the handle at the factory. It marked the price down from $2,250 to $1,650 plus I traded my 6 drawer us general for $350, so I got a matte red Cornwell slide top brand new for $1,300 over $1,000 less than my dad paid. So I feel like I got the last laugh. I say I down upgraded because it's a 5 drawer so I lost a drawer, but got two small slide top storages. It worked out though the two slide tops and top of the box took care of two and a half drawers, so with some organization I managed to gain space.
That’s a very nice cart and great tools. I like how the wrenches are just stacked on their side to save space. I also watched your toolbox videos. Will you upload again?
Where did you get that tray that holds all of your punches in the hammer drawer? Really like that. Some info would be appreciated. Thanks
One of the best roll cart videos I’ve seen looking forward to the toolbox video
Herbert Landrum thank you and thanks for the support
Nice MAC box!!! 👍👍👍
Great tour! That Mac box is loaded to the max! Love the color and the layout is pretty impressive!
bill beckett thank you!
Holyshit man you really have that tool cart pack down. Just goes to show you, you don't need the biggest most expensive tool cart to put a lot of stuff in it
Roll carts can surprise you on the capacity. I went from a Cornwell cart similar to this one to a 54” with hutch but honestly I don’t gain very much space at all. Over all I gained one long full width drawer and one real deep drawer and maybe one other 2/3 width drawer by the time I moved my tools over there wasn’t much empty space to expand left in the box which was a little disappointing.
Just wanted to say thanks for the Video, i picked up a used MB199UCFD over a Matco JSC480
I can't stop watching this video. Can we get an updated tour?
i like the colors of this cart. the sliding top is underrated for sure. great video.
Just Wrench It yeah the color is what sold it for me.
Feels like I'm looking in my cart
That's awesome. You have given me some good ideas. I have the same cart in black.
I love these carts! Did you see One Mechanic's video on the modification ?
Is that mb198uc cart??
Schultz P I did see it and the next day I did the modification. Makes it so much nicer and helps with my OCD because the lid slides open evenly now
lingimee I believe it is
@@beardedtoolmonger3131 Awesome brother !
Nice cart
Flat Rate Master thank you!!
Yea I also like that Color that's a nice box the bearded One Great Look King
Darrian Robinson when I saw this on the truck I told him roll it off. Color sold it for me.
The split top design is by far the better way to go. And yes you do have that thing loaded! good vid.
camshaftP16 I agree, basically like having a mobile work bench. Thank you for the support!
Absolutely. I just got a Mac service cart but with the full folding top, I was unaware these sliding tops existed so I called the Mac truck guy and told him I was to exchange it for the sliding lid lol
Nice looking set up.
Adam Bernath thanks!!
Nice cart, nice collection!
Very cool set up you have their
danoh's toolbox thank you!
What is the name of coil wrench holders your using on the gearwrench? And we’re can I buy the chisel organizer you have in the hammer drawer.
Nice setup
how were you able to put the handle over the railing? i cant figure mine out. i have the same box
This cart is same as mine. I love it so much.
Woosuk Choi it’s been an awesome cart. Im surprised at how much weight it can handle
@@beardedtoolmonger3131 4 swivel casters gives it much better mobility. That's the reason why I choose this cart. In my opinion, this cart is better than snap on KRSC series as an utility cart.
How much you get yours for?
Where did you get that impact gun holder bracket ??
Nice setup!
Thank you!
Love this cart... I have one also😁
Are you able to tell me the part number for the extra deep snap on set for charge air pipes? I couldn’t find anything on their website
Sorry I wish I new it, I no longer have the set to give you any part numbers.
@@beardedtoolmonger3131 thanks anyways 👍, probably more than what I would want to pay anyways lol
How do you like the snap on butane torch?
kory blevins I like it a lot. It works really well. And it lasts quite awhile too.
NICE 👍!!!
What kind/brand of hearing protection are the light green muffs?
Steve Heavener they are made by 3M. The shop bought them from Uline.
How much did the cart cost?
Does the battery charge when you have the fan plugged in?
hellcat523 unfortunately no it does not
What the size on those drive line socks
Thomas Kipikasha 12mm, 13mm, 3/8, and 1/2
Bearded Tool Monger thank you am a tow truck driver most of the time an in the flat bed or battery truck but some times am in the wrecker to pickup med size mail truck I have pull a drive line tks
You work on air brakes I see
Yes I do, we have very few hydraulic brake busses left.
You need a bigger box
CanadianCharlie64 I was thinking of getting the add on side cabinet for this cart. Maybe it will make it less cluttered
i love those colors in general but i think the cart is ugly as hell