Go to 7:49 if youre in a hurry. Really appreciate the video man, had to reset STS on a machine at work after the power went out today and it was a huge help!!
I have learned so much from your videos. I really appreciate you helping me and the vending community out we all gain knowledge from each video and for that I thank you very much
Your videos have been really helpful. Thanks for making them! I have the same machine and everytime it gets unplugged the price go to .50. I was told this means it needs a new battery but for the life of me I can't seem to find where the battery is. Any help would be appreciated.
Glad you enjoy the videos. The battery on a GIII machine will look like a yellow or black rectangle chip on the control board. It should say something like "timekeeper" or "lithium" on it. Use a chip puller to pull the battery off. You can order new ones online.
There really isn't a need for STS on a Dixie because they usually have the same number of columns as they do selection switches and there is no need to make one switch work two columns.
Hey bill, I have a vendo 576 Pepsi machine that keeps jamming the 12 oz can on one column. What do you think could be my problem??? Thanks for the vids!!
I do not have any Vendo machines so I really can't help you on this one. I'm not sure if those machines use can shims. If so, are you using the correct shim? Also, could the rotor be bent or worn? Does anything look different on that column compared to the other columns? You should post a question on the vendiscuss.net message board. There are people there that use Vendos and can help troubleshoot your problem.
I have a royal too, do you know if there is a way to keep all your machine sets up when a power outage happen because I always have to set up everything again when that happen.
You need to replace the backup battery on your control board. It looks like a black or yellow rectangle circuit. Use a chip puller to remove it. It will probably say "timekeeper" on it.
Hey , thanks for the helpful videos. Not sure if you’ll see this comment but when I change to make my STS custom, it often times out as if I’m taking too long , what do I do ?
@@MeetThePrinces So the machine appears to be reseting because that number is the eprom version of the board and that only comes up when the machine resets. Maybe the door switch is going bad and it is behaving like someone closed the door. However, when that happens, the bill acceptor should not be making noise. That usually only happens when someone powers up the machine. There could be a loose power connector going to the control board. You should unplug the machine and check all your connectors. You should also look for broken or loose ground connectors.
My main seller (coca-cola) in column 1 and 7 stopped being responsive when you press the button on my Dasani Royal machine. I'm hoping that your tutorial here will help fix that issue for me as it randomly stopped being responsive when you press the button. Even when you don't input $1, when I press the button it doesn't even show the $1 price. It just acts as if I never pressed anything at all and continue to scroll "ice cold"
Does all the other selections work in the machine? It sounds like the selection switch might have gone bad. You can try swapping the switch with selection 2 to see if the problem follows the switch. If it does, just get a couple switches from Royal so that you have some extras.
Yes. All the other selections work fine. I opened my snack door and it accidentally hit the coke button and knocked off the clear plastic coating and the small flat white button. I popped it back in the button but it was unresponsive after that
when the coin collector is empty it takes a coin and when it is full it does not take coins the machine model in a royal 660-9 which would be the problem...
The sold out display should reset once you open the door of the vending machine. If it is not resetting, you may have a bad door switch. It is an easy repair, just order a new switch from royal.
Go to 7:49 if youre in a hurry.
Really appreciate the video man, had to reset STS on a machine at work after the power went out today and it was a huge help!!
You better replace your battery on the board so that you do keep losing programming.
I have learned so much from your videos. I really appreciate you helping me and the vending community out we all gain knowledge from each video and for that I thank you very much
Be sure to like and subscribe!
Im restoring a 1960 coke machine right now! Cool video!
Thanks! Good luck with your project!
@@HappyVending thank you!
Very helpful. Thanks for making this video.
U make this so easy to understand!
Thank you for these videos
Your videos have been really helpful. Thanks for making them! I have the same machine and everytime it gets unplugged the price go to .50. I was told this means it needs a new battery but for the life of me I can't seem to find where the battery is. Any help would be appreciated.
Glad you enjoy the videos. The battery on a GIII machine will look like a yellow or black rectangle chip on the control board. It should say something like "timekeeper" or "lithium" on it. Use a chip puller to pull the battery off. You can order new ones online.
Keep them coming bill
Do you have a video of spaces to sales on a Dixie narco?
There really isn't a need for STS on a Dixie because they usually have the same number of columns as they do selection switches and there is no need to make one switch work two columns.
Hey bill, I have a vendo 576 Pepsi machine that keeps jamming the 12 oz can on one column. What do you think could be my problem??? Thanks for the vids!!
I do not have any Vendo machines so I really can't help you on this one. I'm not sure if those machines use can shims. If so, are you using the correct shim? Also, could the rotor be bent or worn? Does anything look different on that column compared to the other columns? You should post a question on the vendiscuss.net message board. There are people there that use Vendos and can help troubleshoot your problem.
@@HappyVending alright thanks
I have a royal too, do you know if there is a way to keep all your machine sets up when a power outage happen because I always have to set up everything again when that happen.
You need to replace the backup battery on your control board. It looks like a black or yellow rectangle circuit. Use a chip puller to remove it. It will probably say "timekeeper" on it.
Happy Vending Yes, you got right... It got th yellow circuit, I Wil buy the spare. Thank you so much
Hey , thanks for the helpful videos. Not sure if you’ll see this comment but when I change to make my STS custom, it often times out as if I’m taking too long , what do I do ?
What type of machine do you have? Are you sure it's timing out and you're just not pressing the wrong button?
Royal Vending 660-9 GIII . At first it lets me change the STS and out of the blue it’s say 6714 1-4 and I hear the bill acceptor making noise
@@MeetThePrinces So the machine appears to be reseting because that number is the eprom version of the board and that only comes up when the machine resets. Maybe the door switch is going bad and it is behaving like someone closed the door. However, when that happens, the bill acceptor should not be making noise. That usually only happens when someone powers up the machine. There could be a loose power connector going to the control board. You should unplug the machine and check all your connectors. You should also look for broken or loose ground connectors.
My main seller (coca-cola) in column 1 and 7 stopped being responsive when you press the button on my Dasani Royal machine. I'm hoping that your tutorial here will help fix that issue for me as it randomly stopped being responsive when you press the button. Even when you don't input $1, when I press the button it doesn't even show the $1 price. It just acts as if I never pressed anything at all and continue to scroll "ice cold"
Does all the other selections work in the machine? It sounds like the selection switch might have gone bad. You can try swapping the switch with selection 2 to see if the problem follows the switch. If it does, just get a couple switches from Royal so that you have some extras.
Yes. All the other selections work fine. I opened my snack door and it accidentally hit the coke button and knocked off the clear plastic coating and the small flat white button. I popped it back in the button but it was unresponsive after that
@@melodybee6039 Yeah...probably the switch. Like I said, swap it with another to confirm...then just by some replacement switches.
I've tried to do this. But I'm not finding the service button on the control panel
@@melodybee6039 why do you need the service button to replace the switch?
I have a Powerade GII vending machine but it says sold due what does that mean
It says "sold out"? If it is always saying sold out, you may need to adjust your drop sensor or replace it.
when the coin collector is empty it takes a coin and when it is full it does not take coins the machine model in a royal 660-9 which would be the problem...
Do you mean the coins go directly to the coin return tray?
How do I reset the sold out error on one of my products I just filled it AMD it said s sold out
The sold out display should reset once you open the door of the vending machine. If it is not resetting, you may have a bad door switch. It is an easy repair, just order a new switch from royal.
👍🏾
Good video! Keep it up! Would you like to be TH-cam friends? :)