Thank you for your question. I find that cloning keys is the best money marker for the Key Tool Max. I also use the Ignition Coil Tester frequently to troubleshoot problems with a vehicle's IMMO System..
So, am I to understand that a cloned transponder doesn't need to be programmed to the vehicle? Does that also mean that cloned remote would need to be programmed to thr vehicle? So, only the transponders and the remotes that a generated would require programming? Is that correct?
Can someone explain what i am doing wrong? I am trying to program a transponder key with no buttons, just a simple key. I bought an aftermarket key and with chip. Was working on a 2012 f250 all keys lost. The options listed under immo all keys lost was keyless go or flip key. Neither are what im trying to program. I tried both after erasing current keys in system and both ways with keyless and flip failed. I cant find any information on what im doing wrong. Can someone help?
I have a KTM Pro. I don't have that quick access button on the right. There's a 'PS2' jack located there. My quick access is by pressing and holding the power button located to the left! I also have a mic jack at the bottom besides the DB-15 ODB connector. I have two cables that can plug into connector labelled PS2 (6-pin). One cable is a probe like a multimeter. The other cable is for connecting to the 'Wired' or XK PCB. The USB - C connector is for connecting the USB cable to a charger.
Hello. Do you know why the xm series console is not prepared for 868 and 902 mhz Ford? It says use the remote release until 2020? Thanks for the answer.
what if i only wanted to clone transponder form working key? Does the metal blank with transponder need to have super chip or will any 3rd party key blank with transponder work? or does it have to have xhorse superchip? if so, am i able to buy metal key blank with transponder super chipped embedded already?
Thank you for your question. There is no reason that you cannot clone the Transponder Only. When using Xhorse Products to clone transponders, as a general rule you need to use only an Xhorse Super Chip. Currently, there is not a "produced" key with an Xhorse Super Chip already installed. You would need to buy the appropriate Key Shell and then an Xhorse Super Chip to install in the shell.
@@KeyInnovationsWholesale thank you after searching a bit, that was what I was looking for. Key shells. I would buy key shells, then super chip, then insert into the shell
Hello Mark - The Xhorse Key Tool Max is a great device, but it is not a replacement for your SmartPro. Both of these devices have their strengths. I would recommend owning both if it is within your budget to do so.
I have a fleet of taxis. 08-12 Chrysler town & country and Dodge Caravans. Will the Key Tool MAX work for these vans? need to clone and program. I would appreciate a response.
You could probably clone without issue. To program a new key (not a clone) you will need the pin code on many Chrysler’s. I’m just getting into locksmith work but the 2007 caravan I added a key to the other day required a pin code and the aftermarket tools were unable to pull the pin code from the vehicle.
Thank you for your question. The Key Tool Max does cover the vehicles you are asking about. If you have any trouble finding a locksmith in your local area, please let us know and we will try to help do so.
Thank you very much for your question. The Mini Prog can read data out of a CAS4 Module if the Module has a Mask of 5M48H or 1N35H. You will need to use an Xhorse Solderless Adapter when using the Mini Prog to read data from these Modules.
Im a Locksmith in Upstate ny We have had issues with trying to program a DST40/80 chip for A variety of Subaru vehicles. When you purchase an OEM key the chips come +DST 40/80 and they never program into these specific vehicles. Can I use a superchip to clone or make it not a +DST40/80? I apologize if my exact chip identification number is incorrect but for some reason I cant use a + to a regular DST chip. Subaru Forester/Outback and other Subaru's OR any tips if anyone has had this issue
Hello - Key programming on Subaru Vehicles can be a bit tricky. From my experience, I don't think you are fighting a transponder formatting problem, I believe you are fighting with an incorrect transponder type. The next one of these vehicles you run across, please read the transponder type of the existing key and then comment back here again, or email me at jb@iks.us. Also, Thank you for your question.
@@KeyInnovationsWholesale Do you mean the programming type system? I finally had one come in and I cloned a chip for it and it worked. The next one I get I will take a picture of the chip ID and will send it in here. For some reason it won’t add it. We use smart pro programming procedures.
Thank you for your question, but we need a little clarification. When you say "Does this work with a 2011 Lexus GS 350 Fob", what do you mean by work? Please let us know and we will try to help.
Hello - Universal Prox Keys are just that - They are all interchangeable. If the Key Tool Max has a file to create the Prox Key you need then any of the Universal Prox Keys will do the trick for you. Thanks for your question.
Hello, the key tool max gives me an error, after the data sniffing it says that there is an error writing code on a transponder key when cloning, do you know why the error on not being able to use that chip?
Hello - I would double check and make sure you are using Xhorse Super Chips while cloning. If you are using these, I am not sure about your specific error. If you bought the device from us feel free to call us for Tech Support 1-866-559-5297
Hello - You cannot use KeyDiy Remotes with the Xhorse Key Tool Max. You have to use Xhorse branded remotes. You can also purchase tokens for ID48 Cloning along with the required activation from our Website. Two links for these products are listed below. www.internationalkeysupply.com/products/id48-complete-cloning-48-authorization-for-xhorse-vvdi2-vvdi-key-tool www.internationalkeysupply.com/products/id48-token-for-48-cloning-for-xhorse-vvdi2-vvdi-key-tool-key-tool-max-key-tool-plus
Hello - Thank you for your question. You would use any OBD Programmer of your choice, or if the vehicle you are working with has an OPB Method, you would use that normal method.
Hello - Thank you for your question and we are sorry that you didn't see what you wanted in this video. In the application where the video was recorded, it would not have been easy to use the device to program a transponder to a vehicle. We will keep this in mind for future videos. Have a great day Jose.
What’s the difference of using key tool max and the xhorse app on iOS? What are my capabilities or advantages over using the key tool max over the app?
Hello Yoseph - The Key Tool Max is self-contained as you see in the video. This is the main difference between this device and the Key Tool Mini. I find that I use my mobile phone a lot and for me, it is really handy to not be interrupted by the phone ringing. This is just my personal preference. As far as capabilities go they are the same. Thank you for your question.
Hello - The Xhorse Super Chips (Transponders) are specific to Xhorse Products. I have tried them with other devices and to date, they have not worked. Thanks for the question.
as long as you generate it to the proper chip type with a vvdi first, you can use your other programers to program them. but you must have a xhorse vvdi tool to generate the chip first
@@lakelandcarkeys sir, I have been looking for the answer to this question, and so far, you are the closest to maybe being able to answer it. Can the XHorse device program Autel keys? Thanks for any help.
@@bigart9488 yes, but you must generate the universal autel key with the capable autel device as the key you want to generate, once generated, you can use any programmer to program it to the car.
Cool man, I am into two way radio communications and I mess around with HAM RADIO as a hobby. I own an Auto Repair Shop in State of Delaware and looking to expand my services to Key fob and Key Programming this X Horse looks pretty good for the money!
Hello - Thanks for commenting on our video. I enjoy two way radio and work in the field as I mentioned in this video. The Key Tool Max would be a great addition to your tool box. If you need anything else just let us know. 73s to you!!
Hi JB. How's your company friends doing ? I will see you on IMLSS EXPO on this March. Oh by the way I bought Dignostic program machine was 2012 ... I lost my password...can you set up my computer diagnostic program ? And can you upgrade on this March ? I did only 2 times or 3 times program down load and lost my password...I need your help please.
Thank you for taking a minute to comment on our video and leave us a question. We are sorry that the video quality didn't meet your expectation. If we can help you with anything else please let us know.
im having problems with key tool max and wireless remote, if i generate remote first, then chip, the remote gets deleted, if i generate chip first, then gen remote the chip gets deleted, what am i doing wrong?
Hello -, Thank you for your question. The proper order for this procedure is to create the remote portion of the key and then either create and program the transponder, or clone the transponder. Give it a try again and see if you have success. If you still have an issue it might not be the steps that you are taking but possibly there is a problem with the remote file that is being used.
You have been very clear but I have problems with programming the Fiat keys. After generating the remote, how do I program it? I try to generate a key but it doesn't generate it why? Can I do a clone only or can I generate one? Thanks
Hello Thank you for your question. The KeyDiy Device does share some of the features of the Key Tool Max, but there are quite a few differences. The KeyDiy Device has no ability to control a Key Machine, also the KeyDiy Device has no Cloud Server for File Transfer and no ability to produce a working transponder from an EPROM Dump. There are too many differences to list here. Give this Device a try and I am sure that you will find many uses for it.
Hello sir.my questions are:1)if someone buys xhorse universal key,how to know exactly the compatible cars with that universal key.2)how to programm a xhorse key if it’s already generated ? 3)is it possible to identify a car model with VVDI key tool max if it’s connected to car through OBD device ?if possible how to do it?thanks for the clear answers that I’m waiting for.
Hello - Give us a call any time (866-559-5397) during normal business hours. We are happy to help and offer Tech Support on all the devices that we sell. You can also reach out to info@internationalkeysupply.com and we can connect you with the appropriate person for your need.
![เป็นไปได้ไหม - WanMai [Official MV]](http://i.ytimg.com/vi/_6lZ6b3_7Vo/mqdefault.jpg)
Great tool, makes me money every day.
Just wondering, what are some of your best money makers using vvdi?
Thank you for your question. I find that cloning keys is the best money marker for the Key Tool Max. I also use the Ignition Coil Tester frequently to troubleshoot problems with a vehicle's IMMO System..
Hello - Thanks for taking a minute to comment on our video. I couldn't agree more, I use the Key Tool Max all the time.
Mini key tool vs max key tool which one is the best
hello, i would like to understand how the keytool max tool works if it is easy to use to duplicate my customers' car keys
So, am I to understand that a cloned transponder doesn't need to be programmed to the vehicle?
Does that also mean that cloned remote would need to be programmed to thr vehicle?
So, only the transponders and the remotes that a generated would require programming? Is that correct?
How do you un register a second keytool max from the previous owner and the combine it to your account as the new owner ?
hello, please, what do i have to delete if i sell my device? so the new owner wants to register the device with xhorse?
How do u do the vauxhall key
We are in the USA, so we don't have Vauxhall, sorry!
Can someone explain what i am doing wrong?
I am trying to program a transponder key with no buttons, just a simple key. I bought an aftermarket key and with chip. Was working on a 2012 f250 all keys lost.
The options listed under immo all keys lost was keyless go or flip key. Neither are what im trying to program. I tried both after erasing current keys in system and both ways with keyless and flip failed. I cant find any information on what im doing wrong. Can someone help?
Thanks Great Video Presentation Perfect All The Way
I have a KTM Pro. I don't have that quick access button on the right.
There's a 'PS2' jack located there.
My quick access is by pressing and holding the power button located to the left!
I also have a mic jack at the bottom besides the DB-15 ODB connector.
I have two cables that can plug into connector labelled PS2 (6-pin).
One cable is a probe like a multimeter.
The other cable is for connecting to the 'Wired' or XK PCB.
The USB - C connector is for connecting the USB cable to a charger.
My VVDI won’t clone anymore, I think I’ve used like 15 times. I’m not sure what to do.
Hello. Do you know why the xm series console is not prepared for 868 and 902 mhz Ford? It says use the remote release until 2020? Thanks for the answer.
what if i only wanted to clone transponder form working key? Does the metal blank with transponder need to have super chip or will any 3rd party key blank with transponder work? or does it have to have xhorse superchip? if so, am i able to buy metal key blank with transponder super chipped embedded already?
Thank you for your question. There is no reason that you cannot clone the Transponder Only. When using Xhorse Products to clone transponders, as a general rule you need to use only an Xhorse Super Chip. Currently, there is not a "produced" key with an Xhorse Super Chip already installed. You would need to buy the appropriate Key Shell and then an Xhorse Super Chip to install in the shell.
@@KeyInnovationsWholesale thank you after searching a bit, that was what I was looking for. Key shells. I would buy key shells, then super chip, then insert into the shell
Hy I've watched most of this video it's really amazing.
We are glad you liked it! Let us know what other videos you would like to see in the future.
@@KeyInnovationsWholesale well anything related to newer stuff
From Missouri as well. Just getting into the key world.
Hello - Good ole Missouri! Enjoy the journey into Locksmithing. If you need any help please give us a call.
@@KeyInnovationsWholesale just placed a order with you guys today
We appreciate your support! Let us know if there are any videos you would like to see us make in the future.
My key tool max wants me to( search header info) how do I do this?
iT SAOUNDS AS IF THIS TOOL COULD COMPLETELY COVER THE SAME GROUND AS MY SMART PRO? ANY CONJECTURE TO THAT?
Hello Mark - The Xhorse Key Tool Max is a great device, but it is not a replacement for your SmartPro. Both of these devices have their strengths. I would recommend owning both if it is within your budget to do so.
I have a fleet of taxis. 08-12 Chrysler town & country and Dodge Caravans. Will the Key Tool MAX work for these vans? need to clone and program. I would appreciate a response.
You could probably clone without issue. To program a new key (not a clone) you will need the pin code on many Chrysler’s. I’m just getting into locksmith work but the 2007 caravan I added a key to the other day required a pin code and the aftermarket tools were unable to pull the pin code from the vehicle.
Thank you for your question. The Key Tool Max does cover the vehicles you are asking about. If you have any trouble finding a locksmith in your local area, please let us know and we will try to help do so.
Can the Key Tool Max do BMW CAS4 when paired with Mini Prog?
Thank you very much for your question. The Mini Prog can read data out of a CAS4 Module if the Module has a Mask of 5M48H or 1N35H. You will need to use an Xhorse Solderless Adapter when using the Mini Prog to read data from these Modules.
How can I apply 😫 "unclonable" key or fob "copy " ? ...
Im a Locksmith in Upstate ny We have had issues with trying to program a DST40/80 chip for A variety of Subaru vehicles. When you purchase an OEM key the chips come +DST 40/80 and they never program into these specific vehicles. Can I use a superchip to clone or make it not a +DST40/80? I apologize if my exact chip identification number is incorrect but for some reason I cant use a + to a regular DST chip. Subaru Forester/Outback and other Subaru's OR any tips if anyone has had this issue
Hello - Key programming on Subaru Vehicles can be a bit tricky. From my experience, I don't think you are fighting a transponder formatting problem, I believe you are fighting with an incorrect transponder type. The next one of these vehicles you run across, please read the transponder type of the existing key and then comment back here again, or email me at jb@iks.us. Also, Thank you for your question.
@@KeyInnovationsWholesale
Do you mean the programming type system?
I finally had one come in and I cloned a chip for it and it worked. The next one I get I will take a picture of the chip ID and will send it in here.
For some reason it won’t add it. We use smart pro programming procedures.
Does this work with a 2011 lexus gs 350 fob
Thank you for your question, but we need a little clarification. When you say "Does this work with a 2011 Lexus GS 350 Fob", what do you mean by work? Please let us know and we will try to help.
Hello three do you have a video on programming a 2007 Audi A6 please thank good video thanks
En español cuando.,?
Gracias por su interés. Estamos investigando activamente este tema y esperamos tener pronto traducciones de audio en español.
2 años estudian el tema... Debe de ser algo increíblemente grandioso, como aun lo están preparando... Saludos estamos a la espera
Hi,
Is xhorse super remote reusable?
Thanks
Yes, it is!
Hello - Thank you for your question. The answer is yes, the Xhorse Universal Remotes and Prox Keys are reusable.
Why don't you answer my questions?
anyone know if you need a specific model of the universal key to clone id48 proximity keys?
Hello - Universal Prox Keys are just that - They are all interchangeable. If the Key Tool Max has a file to create the Prox Key you need then any of the Universal Prox Keys will do the trick for you. Thanks for your question.
Hello, the key tool max gives me an error, after the data sniffing it says that there is an error writing code on a transponder key when cloning, do you know why the error on not being able to use that chip?
Hello - I would double check and make sure you are using Xhorse Super Chips while cloning. If you are using these, I am not sure about your specific error. If you bought the device from us feel free to call us for Tech Support 1-866-559-5297
Can you generate key dyi remotes with the key tool max?
Trying to get the bonus points to unlock id48
Hello - You cannot use KeyDiy Remotes with the Xhorse Key Tool Max. You have to use Xhorse branded remotes. You can also purchase tokens for ID48 Cloning along with the required activation from our Website. Two links for these products are listed below.
www.internationalkeysupply.com/products/id48-complete-cloning-48-authorization-for-xhorse-vvdi2-vvdi-key-tool
www.internationalkeysupply.com/products/id48-token-for-48-cloning-for-xhorse-vvdi2-vvdi-key-tool-key-tool-max-key-tool-plus
what do you use to program the remotes
Hello - Thank you for your question. You would use any OBD Programmer of your choice, or if the vehicle you are working with has an OPB Method, you would use that normal method.
@@KeyInnovationsWholesale thanks, but what i mean is what programmer do you personally use to program the central locking part
Why you never finish the steps to program the key that you generated? You jumped into something else to program a chip
Hello - Thank you for your question and we are sorry that you didn't see what you wanted in this video. In the application where the video was recorded, it would not have been easy to use the device to program a transponder to a vehicle. We will keep this in mind for future videos. Have a great day Jose.
After generating a transponder chip, we can simply clone it instead of programming it for adding a key right?
Hello - You are correct. The Xhorse Super Chip is very versatile and can be used for cloning or OBD programming. Thank you for your question.
What’s the difference of using key tool max and the xhorse app on iOS? What are my capabilities or advantages over using the key tool max over the app?
Hello Yoseph - The Key Tool Max is self-contained as you see in the video. This is the main difference between this device and the Key Tool Mini.
I find that I use my mobile phone a lot and for me, it is really handy to not be interrupted by the phone ringing. This is just my personal preference. As far as capabilities go they are the same. Thank you for your question.
HAS ANYONE USED THE SUPER CHIP WITH ANY OTHER PROGRAMMERS?
Hello - The Xhorse Super Chips (Transponders) are specific to Xhorse Products. I have tried them with other devices and to date, they have not worked. Thanks for the question.
as long as you generate it to the proper chip type with a vvdi first, you can use your other programers to program them. but you must have a xhorse vvdi tool to generate the chip first
@@lakelandcarkeys sir, I have been looking for the answer to this question, and so far, you are the closest to maybe being able to answer it.
Can the XHorse device program Autel keys? Thanks for any help.
@@bigart9488 yes, but you must generate the universal autel key with the capable autel device as the key you want to generate, once generated, you can use any programmer to program it to the car.
Cool man, I am into two way radio communications and I mess around with HAM RADIO as a hobby. I own an Auto Repair Shop in State of Delaware and looking to expand my services to Key fob and Key Programming this X Horse looks pretty good for the money!
Hello - Thanks for commenting on our video. I enjoy two way radio and work in the field as I mentioned in this video. The Key Tool Max would be a great addition to your tool box. If you need anything else just let us know. 73s to you!!
I have been off waves for several (couple) decades now.😅
Handle: V21IC
'73
Hi JB. How's your company friends doing ?
I will see you on IMLSS EXPO on this March.
Oh by the way I bought Dignostic program machine was 2012 ... I lost my password...can you set up my computer diagnostic program ? And can you upgrade on this March ? I did only 2 times or 3 times program down load and lost my password...I need your help please.
Can you clone a key DIY non orginal remote
Have you found the answer to this question?
Way the quality of the video is so LOW?!
Thank you for taking a minute to comment on our video and leave us a question. We are sorry that the video quality didn't meet your expectation. If we can help you with anything else please let us know.
im having problems with key tool max and wireless remote, if i generate remote first, then chip, the remote gets deleted, if i generate chip first, then gen remote the chip gets deleted, what am i doing wrong?
Hello -, Thank you for your question. The proper order for this procedure is to create the remote portion of the key and then either create and program the transponder, or clone the transponder. Give it a try again and see if you have success. If you still have an issue it might not be the steps that you are taking but possibly there is a problem with the remote file that is being used.
From indonesia my friend
Thanks for checking in from Indonesia - I hope you found our video helpful!
@@KeyInnovationsWholesale my friend can i use this VVDI KEY TOOL MAX to program key car remote without using MINI OBD TOOL ??????
@@KeyInnovationsWholesale can I have your contact details?
You have been very clear but I have problems with programming the Fiat keys. After generating the remote, how do I program it? I try to generate a key but it doesn't generate it why? Can I do a clone only or can I generate one?
Thanks
this vvdi seems very similar to the key diy x2 in what it can do, but better
Hello Thank you for your question. The KeyDiy Device does share some of the features of the Key Tool Max, but there are quite a few differences. The KeyDiy Device has no ability to control a Key Machine, also the KeyDiy Device has no Cloud Server for File Transfer and no ability to produce a working transponder from an EPROM Dump. There are too many differences to list here. Give this Device a try and I am sure that you will find many uses for it.
GREAT !
We're glad you enjoyed the video, let us know what other videos you would find helpful.
Hello sir.my questions are:1)if someone buys xhorse universal key,how to know exactly the compatible cars with that universal key.2)how to programm a xhorse key if it’s already generated ? 3)is it possible to identify a car model with VVDI key tool max if it’s connected to car through OBD device ?if possible how to do it?thanks for the clear answers that I’m waiting for.
it`s nice
Thank you for your comment and your encouragement - Let us know what other videos you would like to see in the future.
I'm thinking about calling up there for some onfo I need help ahhhh
Hello - Give us a call any time (866-559-5397) during normal business hours. We are happy to help and offer Tech Support on all the devices that we sell.
You can also reach out to info@internationalkeysupply.com and we can connect you with the appropriate person for your need.
I think you need to be a liottle more obective, straight to the point: Step one, two, three, etc.
Thank you for the feedback!
Sad this gentleman spent all the time talking about point