Antique Farm Auction Results. Good used farm equipment for sale at auction near me. Good used farm tractors for sale at auction near me. #farmallfanatic #farmall #farmauction
To anyone interested this tractor will stay up at loucks for the next monthly consignment sale, 2500 reserve! If your interested make sure you come by!
Some of those older tractors must have been through a dozen auctions since they rolled off the factory floor, and yet they still command bidders. Imagine the stories those tractors could tell of where they farmed and the work they did.
The FARMALL A with sickle bar mower $750 Cheap .In 1970 at my Dad's sale are Farmall 100 year 1956 or 1957 with hydraulic loader and mower sold for 750 a one condition 🤔🏆
Sorry I missed live stream. I'm surprised they don't use a battery booster on those no starts. But I understand most were running earlier. Just seemed like some were rolling over way slow. Good stuff at that sale.
Ooooooh! Oooooh! I got it! Your new channel name could be "Amish Bearded Auction Fanatic"!! Lol! Thanks for the auction tour. The market for that equipment is starting to soften. Wonder if it will 'bout stagnate by fall? Hmmmmm......
the H is the same year mine was and i bet it has the high compression head. the yellow and blue ford 2000 was the utility model and i think it was used to pull a gang reel mowers on a golf course , sold with a 4spd 5 spd 10spd selecto speed ot a 3 on 4 12 spd trans options the oliver superior grain drill is like the one dad had
Farm fan you do a good job covering auctions. it's my understanding that AC 180's had a hydraulic clutch that didn't make many friends. Trouble that's happening Fan is that the stuff in this sale regardless of condition it's just getting too old and simply because it ran in the morning it doesn't mean it's going to run in the afternoon. At the same time the JD 2010 was one of the least popular modern era greens.
@@FarmallFanatic bid on a Farmall 100 manure spreader but it ended up going for $1100. I did get a flat wagon. It was the very last farming item to be auctioned off. An IH 37 disc went for $650. Three A’s in poor condition at best went for around $500 each. All in all a good auction.
After seeing how low the other tractors were going... I saw the H wasn’t going to $2750. I would have given the $2500 reserve! In my part of the country a $2500 Farmall doesn’t look half as good as that one.
On that ford 2000 tractor they use to put a frame on those tractor's and build hot rod pulling tractor out of those and put two V8 engine's on them and they also put 30.5X32 tires on the back and they pulled really well when they use to pull them and those F20 they made good pulling tractor's because of the rear end on them they make good pulling tractor's
Went to a sale Sunday, came home with a M with a Dual loader and a wide front for 1200. It was an estate auction with 41 tractors ACs, IHs ,JDS and olivers. They had 3Rings going and took 6 hours to sale everything.
“If it ain’t red, leave it in the shed” never rang truer. My brother-in-law loves his Allis’. 140, super c, 200, 230, 240, 300, 350, 504, 656, 706…these are a few of my favorite things…
To buy a nice A and a nice old grain drill for under a $1000 that just seems crazy. When I watch your auction videos it drives me just a little crazy when that older gentleman smacks the metal on those tractors with his stick.
Yeh it was 40. The ring gear and pinion has a completely different ratio. One other tractor that would run 35 in high gear was the late model Silver King. Also the turf model MF 35 was the same way as the Ford.
@@FarmallFanatic might be a little scary. Try the row crop Silver King tractor with the single front wheel. They were would run 35mph stock in high gear. It a big bump you probably fly. Lol
20:19 I found that Farmall C on marketplace, it must've been posted after the auction. The block has been welded behind the carburetor, I think it was listed for $750. Some amazing deals there, I couldn't believe it when that one H sold for $400
@@FarmallFanatic I did not. I bought it that way. It was a barn find. It had been sitting for 6 years or more and the engine was stuck. It runs great. Farmalls are great tractors. Hard to kill em.
I was yelling at the screen trying to bid, too many of those tractors went low. I would have been all over that H with the slick paint for $2,500. The tires are $1,800 alone! That B john Deere would have came home with me too, $1,200 all day long. I'm not brand judgemental! They would look great with my Fordson Major and Oliver 770.
Some of the prices definitely did seem low... l watched Polks 3 day antique tractor auction in New Paris, Indiana this past Thursday, Friday, and Saturday..Prices there were definitely higher acrossed the board.. even in the junk row nothing much less than $850 ...they are live and online ..probably helps some
@@hturbo1007 just called the local tire shop last week. A set of alliance 14.9x38 are $1,435, tubes are $180. Bought a set of Carlisle 6.0x16 for $180 still need to get tubes for them.
@@BillTheTractorMan you're right on the money for 14.9's .but the H had 12.4s . I purchased a set of BKT's for my H two years ago for around 700 on sale.
@@hturbo1007 in my area we have very sandy soil. The larger 14.9's have a little more footprint for better traction and less digging if there is slipping.
That was one cheap auction the tractors were sold way under value ☹️ the PAVT wheels in that 65 would make that money for the wheels alone over here 🏴 enjoyed the video 💥👍
I can't remember ever being at a sale where tractors sold that low..... I would have been killed by the wife if I'd have been their cause I would have brought me several tractors home......
To anyone interested this tractor will stay up at loucks for the next monthly consignment sale, 2500 reserve! If your interested make sure you come by!
Some of those older tractors must have been through a dozen auctions since they rolled off the factory floor, and yet they still command bidders.
Imagine the stories those tractors could tell of where they farmed and the work they did.
No doubt
I really liked that PTO lever modification on the H 👍
Yea that's slick
I've got that exact same thing on a late 40's M. Must have been sold as an aftermarket add on.
The FARMALL A with sickle bar mower $750 Cheap .In 1970 at my Dad's sale are Farmall 100 year 1956 or 1957 with hydraulic loader and mower sold for 750 a one condition 🤔🏆
The price on that little massey makes me feel more comfortable sinking some money into my super 90!
They're good tractors
Quite a few no sales and no starts. Nice variety. 👍🍻💥
Sorry I missed live stream. I'm surprised they don't use a battery booster on those no starts. But I understand most were running earlier. Just seemed like some were rolling over way slow. Good stuff at that sale.
The tractors were turning fine they weren't getting fuel
@@FarmallFanatic gotcha! Thanks for sharing with us all!
Really some good deals . Im afraid if I had been there , I would of came home with several . Love your videos .
Thanks 👊
Thank you so much for this video. Super helpful and well-presented. Your time and effort is most appreciated!
Thanks for watching
Ooooooh! Oooooh! I got it! Your new channel name could be "Amish Bearded Auction Fanatic"!! Lol! Thanks for the auction tour. The market for that equipment is starting to soften. Wonder if it will 'bout stagnate by fall? Hmmmmm......
We gotta get you a beard!
the H is the same year mine was and i bet it has the high compression head.
the yellow and blue ford 2000 was the utility model and i think it was used to pull a gang reel mowers on a golf course , sold with a 4spd 5 spd 10spd selecto speed ot a 3 on 4 12 spd trans options
the oliver superior grain drill is like the one dad had
That was a very nice drill
Farm fan you do a good job covering auctions. it's my understanding that AC 180's had a hydraulic clutch that didn't make many friends. Trouble that's happening Fan is that the stuff in this sale regardless of condition it's just getting too old and simply because it ran in the morning it doesn't mean it's going to run in the afternoon. At the same time the JD 2010 was one of the least popular modern era greens.
Ran in the morning and then someone shut the gas off after they ran
No fair. You were high and dry. I was at the Luce equipment auction in Somerset county and the mud was shin deep with snow all day.
Hopefully they had what you wanted
@@FarmallFanatic bid on a Farmall 100 manure spreader but it ended up going for $1100. I did get a flat wagon. It was the very last farming item to be auctioned off. An IH 37 disc went for $650. Three A’s in poor condition at best went for around $500 each. All in all a good auction.
Sounds it
After seeing how low the other tractors were going... I saw the H wasn’t going to $2750. I would have given the $2500 reserve! In my part of the country a $2500 Farmall doesn’t look half as good as that one.
When guys restore a Farmall tractor, it's always an H. There's the problem
It looks like it was a good day for a sale. Sale day weather here in Ohio has been not so good.
It was rough early then got better
7:30 That little A is a better tractor than $550 assuming it is enjoying good health. Prices seem to be soft on older tractor's this spring. JMO.
Agree
It must have been cold. Everyone had their hands in thier pockets.
On that ford 2000 tractor they use to put a frame on those tractor's and build hot rod pulling tractor out of those and put two V8 engine's on them and they also put 30.5X32 tires on the back and they pulled really well when they use to pull them and those F20 they made good pulling tractor's because of the rear end on them they make good pulling tractor's
Went to a sale Sunday, came home with a M with a Dual loader and a wide front for 1200. It was an estate auction with 41 tractors ACs, IHs ,JDS and olivers. They had 3Rings going and took 6 hours to sale everything.
Sounds like it turned out well for you
Nice H. Deal of the day? D17 or the Superior grain drill. The 2010 makes a great loader tractor.
Grain drill was nice
“If it ain’t red, leave it in the shed” never rang truer. My brother-in-law loves his Allis’. 140, super c, 200, 230, 240, 300, 350, 504, 656, 706…these are a few of my favorite things…
230 interests me
That’s a shame they didn’t have them running before the sale
They did have em running
To buy a nice A and a nice old grain drill for under a $1000 that just seems crazy. When I watch your auction videos it drives me just a little crazy when that older gentleman smacks the metal on those tractors with his stick.
He's the ENFORCER! 😁
😊😊👍 Most of those tractors would have brough more where I live.
Every sale here is different
Can't believe that some one didn't buy the h with paint look like that
Maybe next time
I love the F20s from my childhood.
Smash that like button
AND comment your favorite Farmall !!
SUPER M 💥
BOOM 💥
Some are saying the Tractors went to low.
Are we seeing the beginnings of the recession?
In 2023 a lot of people will be almost giving stuff away.
I really think it depends on where you're at right now because there are certain models of tractors that are going way high
Crap. Got busy and missed the live.
It's now a video
Yeh it was 40. The ring gear and pinion has a completely different ratio. One other tractor that would run 35 in high gear was the late model Silver King.
Also the turf model MF 35 was the same way as the Ford.
So if I got on that 2000, I could fly?
@@FarmallFanatic Just about!
@@FarmallFanatic might be a little scary. Try the row crop Silver King tractor with the single front wheel. They were would run 35mph stock in high gear. It a big bump you probably fly. Lol
@@neilkratzer3182 Single front wheel at 35mph? Sounds like death, lol.
@@copperhead6132 you got it.
Superior grain drill was cool
Lots of coverage. Good job.
The casting codes would tell you what year that H is.
It's a 51
G day I forgot Is Dan fellow with cane, father to Bennie, they sure look alike? Thanks
No relation
I have a question about an IH part that I found I made a short on it. It’s called
It’s IH you tell me what part
I'll check it out
20:19 I found that Farmall C on marketplace, it must've been posted after the auction. The block has been welded behind the carburetor, I think it was listed for $750. Some amazing deals there, I couldn't believe it when that one H sold for $400
Did you see what all it needed? 😳
@@FarmallFanatic No I didn't, the advert wasn't very specific. Just said that it ran but the block was welded.
No I mean the H
@@FarmallFanatic oh 😂, no I did not. I imagine it's a lot.
Never thought I would see the day ,a beautiful international selling for 300 dollars! Sad day!
Fewer and fewer restoration guys out there
My '47 H has the same pto lever on it. It is nice to have. It doesn't have a nob. I can send you a picture if you'd like.
Did u add it?
@@FarmallFanatic I did not. I bought it that way. It was a barn find. It had been sitting for 6 years or more and the engine was stuck. It runs great. Farmalls are great tractors. Hard to kill em.
If that H was a 1940 the platform would be smaller thats how they were the first two years of production
Yesssss
I was yelling at the screen trying to bid, too many of those tractors went low. I would have been all over that H with the slick paint for $2,500. The tires are $1,800 alone! That B john Deere would have came home with me too, $1,200 all day long. I'm not brand judgemental! They would look great with my Fordson Major and Oliver 770.
Some of the prices definitely did seem low... l watched Polks 3 day antique tractor auction in New Paris, Indiana this past Thursday, Friday, and Saturday..Prices there were definitely higher acrossed the board.. even in the junk row nothing much less than $850 ...they are live and online ..probably helps some
Where do you buy your tires? I paid about half that for BKT's for my H. I do agree, those tractors should have brought more money.
@@hturbo1007 just called the local tire shop last week. A set of alliance 14.9x38 are $1,435, tubes are $180. Bought a set of Carlisle 6.0x16 for $180 still need to get tubes for them.
@@BillTheTractorMan you're right on the money for 14.9's .but the H had 12.4s . I purchased a set of BKT's for my H two years ago for around 700 on sale.
@@hturbo1007 in my area we have very sandy soil. The larger 14.9's have a little more footprint for better traction and less digging if there is slipping.
Locked and ready here in east TN
💥BOOM💥
That was one cheap auction the tractors were sold way under value ☹️ the PAVT wheels in that 65 would make that money for the wheels alone over here 🏴 enjoyed the video 💥👍
When they don't start it matters
I can't remember ever being at a sale where tractors sold that low..... I would have been killed by the wife if I'd have been their cause I would have brought me several tractors home......
If they don't fire up the moment of the sale, it hurts sale price
Can't believe that beautiful h. Didn't bring reserve where was this one
Watch next video...WTC AUCTION
Good buy on that A
I am not a row crop guy but I do love that H
I should have bought it
Yes he as long he shows all of in stad all red
How much did the Farmall H go for
2500
Yeah. It will go the distance on the haul
Start the thing fanatic lol
Did u like. That reply I sent u just kidding
Farmall go for
Payday candy bar you like those?
Snickers for the win 🏆
Boom!
Were are the auctions located so I can visit some day 🙂
NY, OH, PA
Too many tractors went far too cheap
Where is this auction located
WTC AUCTION IN SAEGERTOWN, PENNSYLVANIA
They didn't even try to start any of the past tractors
What do you mean past?
Just exactly what I said about the tractors
Yeah. It Ac fanatic lol
Those tractors sold way to low
I got a ( M) for sale Farmall