How to powder coat two tone one piece wheels - Ep 26
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- For chemical stripper contact Matt at Express Chem 314.266.4600 tell him I sent you
Powder Suppliers -
www.prismaticpowders.com
www.allpowderpaints.com
You can subscribe to my channel for new videos of powder coating and wheel builds as well as special projects rolling thru the shop
►Follow me on Instagram @unknowncoatings
►Follow me on Facebook / unknowncoatings
Shop Info:
2451 S 600 W
Suite 500
Salt Lake City, UT 84115
(385) 529-7310
Wow those turned out awesome!
Well I try. Its all about the microns lol
You are correct doing the back first. The reason is picture framing. If you do front firth them back you will get picture framing 98% of the time if you look at it closely and of course some colors you will notice more then others.
Green Mountain Media Blasting & Powder Coating
i know, im not a newb, when people say im doing it wrong I just laugh
Exactly--also helps get Faraday areas on the front side, surprisingly. I do angled passes from the back to hit front-facing areas sometimes.
I wish these videos were available when I started coating. Great videos. I learned how to powdercoat (side business in my barn) by doing stuff for free and having to redo everything five times.
Hah same. Minus the barn part. Its most if the reason I put these videos out, I'm hoping people can find use in them
Thanks for the video!! Learned a lot as usual.
stoked to hear it
thanks for the tip i do distressed flags I always used a dry rag to remove powder going to try the microfiber towel damp idea
Wasn't sure where you were going with this procedure but WOW, they ended up looking freaking awesome.
I appreciate it!
Great vid man , appreciate you making these vids , I know you don't have to do these but for people like me we really appreciate it
of course always glad to helP!
Great vid as always
Green Mountain Media Blasting & Powder Coating
One thing I do when I'm whiping wheels like this is hang it with a adjustable tie down around the wheel after I spray the second coat on so I can spin the wheel while its hanging that way the powder always falls away from the wheel when wiping it off and I can get a straight line
nice!
Superb! What beautiful tones!!!
Thanks a lot!
Think I wanna do this for my widebody charger. It's smokeshow with red interior and calipers so I think the red wheels would set it off and make it stand out.
Love the work turned out so cool
I appreciate it
Nice job man!
thanks I appreciate it!
Great video like always! Love your channel
I appreciate the kind words
Enjoyed this one allot. Thanks for posting.
thanks for the support dan!
Keep up the great content man!
Will do! Thanks for the support!
Hey bud been watching your vids for a while now and learned a bit from you, I'm doing a set of 2 tone wheels for my personal project my question is how long do you bake to get the partial cure? The prismatic powder I am using is ink black application sheet say full cure 400° for 10min thank you in advance.
partial cure is flow out plus a few minutes.
I am new to powder coating can I you how you figure out the cost of what you are powder coating
Hopefully this makes sense so here it is. I had someone who wanted chrome wheels done and I’ve never done chrome before. I know if chrome is good you can etch and powder over. Well if chrome has good and bad spots I asked both you and 710 and was told stay away from chrome or charge more because it’s a pain to try getting off. Well I’ve been watching lots of videos and is there a way like a magnet or something so I know if it’s chrome I’m looking at or polished aluminum or something else polished? Is there some kind of test I can do? I’m afraid of taking on a chrome job thinking it’s polished aluminum or vis versa? Any advice?
debating on driving the 9 hours to have you powder coat my wheels lol
9 hours from where?
im new to this, your cloud is huge compared to what i spray,
Really enjoy your videos, has helped me with my small business,Thank you
I have a side question if you could help i would greatly appreciate it
Some of the german oem wheels i get have this really strong primer than doesn't come off with chemical strip or sandblasting it takes ages any tip on how to remove that ?
What chemical stripper are you using? It's epoxy primer you are speaking of
Super cool job. Do you have any advise for beginners (what equipment and tools needed like oven, paint stripper)?
Check out Episode 23!
Home run on the video and rims
Thanks I really appreciate it!
Is 10'x10'x8' oven big enough for starting my powder coating business?
What do you mean a partial cure.
what media do you use to blast aluminum wheels? Soda, Walnut?
Walnut and Soda are not to be used to prep anything for powder. I use 30-60 green diamond
Awsome channel dude 👊
We have a gema gun that looks just like yours but ours has controls on the gun!!
Just wondering if you could give us some advice
What psi is going to your gun??
We have around 40 psi as anything less doesn't allow powder out
What settings do you use on:
1. Flat colours like mirror black
2. Metallics like sparkle silver
3. Do you use acrylic laquer or polyester, if so what settings do you use??
Thanks
running in is about 40 but I run less in the unit itself.
I follow the powder manufacturers recommendation. They usually have a suggested KV at least
I use acrylic clear, and polyester, depends on the job!
@@UnknownCoatings thanks for the reply bro!!
We just switch it over to the 2nd coat setting, finished product is normally fine but the clear powfer always comes out of the gun in random bursts?? Any advice would be appreciated 🙏
Have learned a lot from you
I'm just starting to powder coat and just ran across your channel. Definitely gonna watch your videos and try and learn as much as I can while I practice. Did you make the clips holding the rims or did you buy them somewhere? Thanks for the videos and those rims look awesome great job!
Just saw the video of you saying you use 5/16 eye bolts and nuts lol will have to pick some up!
Yeah was gonna mention it's detailed a bit in episode 23 but looks like you maybe found it.
Hi like your vid's :)
One thing I'd like to ask is: my tyre guy says that if you coat the face that's on the inside of the tyre it then can flake off over time with tyre on. With the high speed rotation of the wheel on the road causes the flakes to wedge themselves under the tyre lip between the tyre and the wheel and cause slow air leaks.
I notice you seem to coat this part of the wheel every time do you have a reason for that?
Hobbyist powder coater mainly for brake calipers for Toyota MR2 /MR-S (US) - I about to give my own wheels ago for the first time :)
Many Blessings, Simon, The Padre
with proper prep, the powder doesnt come off. if it does jsut from tires rubbing, its a bad powder coat job.
thanks for the videos, they're very helpful, keep up the good work! What to you do with the plastic center caps that are on rims? paint color to match?
I tend to avoid them but if I have to I have paint made in a spray can at a local auto body supply store.
Do you have any videos of doing two tone like super chrome with translucent red over the top
I don't think so. But I could probably make one
Very cool!! If you don't mind me asking, what air pressure and KV did you use for the first coat?
12-15psi and maybe 65-70kv
What is the Kv to use for wheels single coat and two coats thanks for the info.
your powder supplier likely has recommendations. for me its tpyically 45 for first coat 40 or less for second coat
What's the curing time for the partial cure and do you let it cool down when you put that other color on?
I do flow out and a few minutes then pull it to cool
super cool!!!!!
Thanks! I appreciate it!
I did some stools and I noticed like air bubbles, what went wrong?
airbubbles is typically outgassing
Where did you buy your spray booth? Or do you recommend a way to build my own?
I had a local fab guy build the frame for me.
Any tips for outgassing wheels? Temps? Times?
lots of variables, but typically 50 degrees above powder curing temp for an hour
Have you tried a low tack painters tape on the wheel after the first coat to get a clean line on the second coat before wiping? If you have are there any reasons to not do it?
i dont like to add random stuff in the mix, not worth the risk
So I'm seeing a lot of shops charge typically $100 per wheel but how much do you charge to repair like road rash?
If it doesnt need welded I dont charge more than 10 a wheel to sand it out and then of course the cost of powder coating
Unknown Coatings thank you for such a clear answer. I love your channel, straight to the point and never leaves me guessing.
@@cryptorichordietrying5556 always glad to help when I can!
What gun do you use to sandblast, I use one that looks like it but mine is to hard to press and my hand hurts
harbor freight but with the deadman valve removed.
What media do you sand blast aluminum wheels with?
30-60 Green Diamond
Great videos , keep them up. Can u put charge price and cost breakdown?
Pricing is hard to break down because there are a ton of variables and location matters. This job was 650 dollars.
Just wondering, what powder coating system are you using?
an HS02 from 2008. Episode 23 has a full break down of my equipment, including links in the description to each item!
Thanks!
What dryer sheets do you use? All the ones I've found have silicone on them and that caused issues for me so I'm just slower and more careful now. Newbie coater full disclosure.
the ones I used came from whole foods, some no scent, natural something something
From my experience you should coat gloss finishes somewhat thicker,around 90 microns,your looks like at around 60. Trust me,do a test and coat 2 seperate things on the way you do now,and coat it at around 30-40% thicker and see the difference. Let me know what do you think. In my opinion it just looks so much better.
So ignore manufacturer recommendations and apply the recommendations of a random guy online ?
I think im most impressed by your ability to measure microns by eye on a video shot on a cell phone!!!
What is the music? From the 25:35 min. Pls
R.A. THe Rugged Man - Chains
I understand the pain and how time consuming this can be.. I hated your customer man