The design won't work due to the collapsing and concentrating flux between the on and off phases still acting on the steel piston which would eat away at the inertia very quickly. The magswitch needs to transition between on and off instantly to have any chance of working.
You just have to remake one nuance that complicates the structure a little. You have a smooth switch, which is most likely to balance the forces, and you need to switch the lock when the movement phase is in the final position. That is, as soon as the piston was drawing to the castle, only in this position you should switch the lock ...
Every day you are introducing some new designs . But all of them are animations only. Have you ever build even one of your design physically? No . What happened to your motorbike engine you showed in the previous video which you intended to convert to a self -running magnet engine ????
It's fine as a concept, but it wouldn't work! You have more problems that you haven't considered yet. 1 temperature! It would need a high number of switches for the engine to work successfully. 2 The magnetic force is strongest just before the merger So it would have a better effect with a shorter cylinder. 3 Synchronization of the motor and the feedback energy for the drive reduces the power output and is unstoppable when control is lost. Divorce is necessary! 4 in all simulations we saw axes at 180° Shift, despite 4 cylinders, which can cause the rotation to stop without an inertia disk. Don't look to gasoline engines to successfully use your idea. You can create a vacuum magnetic motor or a hydraulic magnetic one where the fluid is used to drive a turbine and produce electricity or rotational energy. But first you have to set dedicated parameters for your engine! what will it be used for Generator of electricity, Car, motorcycle all this helps you to make a prototype for a specific purpose?
@@matjazwalland903I think it's very nice that you believe in making the world a little better. Don't give up on this thought. However, with this project you might find yourself at a dead end. Consider whether you should just take a different route. 😊
375 / 5.000 keyboard Risultati della traduzione Risultato di traduzione I don't know whether to tell you to go back to school and study, or ignore this video, It does NOT work, when the two rotating magnets are at their maximum attraction (north upper with south lower and vice versa), the force to detach them (make them rotate) is much greater than what you think the piston will give you, consequently it remains STILL go back to school or leave technical provocations
@@TecraTube that is the idea to make subs and view for money not working free magnet generator . if it had been easy a long time ago, it would have been built by much smarter engineers than him
you are getting closer! keep at it my friend!
Did you not consider the force that the two colored magnets exert on each other?
The design won't work due to the collapsing and concentrating flux between the on and off phases still acting on the steel piston which would eat away at the inertia very quickly. The magswitch needs to transition between on and off instantly to have any chance of working.
You just have to remake one nuance that complicates the structure a little. You have a smooth switch, which is most likely to balance the forces, and you need to switch the lock when the movement phase is in the final position. That is, as soon as the piston was drawing to the castle, only in this position you should switch the lock ...
How will it cope with a generator load?
BUILD IT physically !
Buen trabajo excelente explicación! Gracias
Es posible ver el prototipo para buscar las mejoras?
Sir, am waiting for a working model 💪💪
then wait a minute... 😂
If you have a bunch of LEGO Technic laying around, you could easily try to build this. Or order the pieces online.
thanks for your comment, after the final concept, I built it with a 3d printer like some previous concepts.
@@EnergygraphyI'm looking forward to it!
@@Energygraphy
Are you india brother
If that is an engine that produces works then i wonder where the energy that power the engine comes from.
I recently pointed out that please don't forget to connect the aluminum hat to the overhead line of the train, otherwise the whole thing won't work! 😉
on my channel the real gravity engine
Nice idea, good thinking.
Оно работает?! Вижу только графику..
Please do a practical to make a prototype
Ca devrait marcher combien de kilowatts
Every day you are introducing some new designs . But all of them are animations only. Have you ever build even one of your design physically? No . What happened to your motorbike engine you showed in the previous video which you intended to convert to a self -running magnet engine ????
i tell you nothing! because not work
Build one 👍
That's good 👍
More simple and powerfull.
It's fine as a concept, but it wouldn't work! You have more problems that you haven't considered yet. 1 temperature! It would need a high number of switches for the engine to work successfully. 2 The magnetic force is strongest just before the merger So it would have a better effect with a shorter cylinder. 3 Synchronization of the motor and the feedback energy for the drive reduces the power output and is unstoppable when control is lost. Divorce is necessary! 4 in all simulations we saw axes at 180° Shift, despite 4 cylinders, which can cause the rotation to stop without an inertia disk. Don't look to gasoline engines to successfully use your idea. You can create a vacuum magnetic motor or a hydraulic magnetic one where the fluid is used to drive a turbine and produce electricity or rotational energy. But first you have to set dedicated parameters for your engine! what will it be used for Generator of electricity, Car, motorcycle all this helps you to make a prototype for a specific purpose?
Have you seriously thought about it? 😂
@@sagmalehrlich Why not? If things improve for everyone because of my comment, I'll gladly give it.
@@matjazwalland903I think it's very nice that you believe in making the world a little better. Don't give up on this thought. However, with this project you might find yourself at a dead end. Consider whether you should just take a different route. 😊
@@sagmalehrlich I agree.
It will work %30 efficiencyl like DC motor if you make real model.
Магнитный замок хорошо держит, но не сможет, достаточно эффективно, совершать работу.
ok.. i have been fallowing you long enough. here is my hint. think Genevia Mechanism. similar to what "up @no_body_no" said.
This design is a disaster waiting to happen.😂, the pistons going in the same direction at the same time. Might get airborne. 😅
BUILD IT
Eso no sirve las fuersas de repulsion paran inmediatamente el motor ya lo hice y que decepción.
i bet it did not work ! why not make it and show us instead talk on theory ? and moving picture ?
Bakwas
375 / 5.000
keyboard
Risultati della traduzione
Risultato di traduzione
I don't know whether to tell you to go back to school and study, or ignore this video,
It does NOT work, when the two rotating magnets are at their maximum attraction (north upper with south lower and vice versa), the force to detach them (make them rotate) is much greater than what you think the piston will give you, consequently it remains STILL
go back to school or leave technical provocations
Show us a real model , that not function
100% magnetic, 0% success
Fail
Stop your youtube channel, because grafix is not deserve in real-time Real-world
Please show us a "real" working engine, instead of these animations !
Or perhaps it just does not work at all ...
He did build it and it doesn’t even turn.
unsubbed. too many cartoons.
@@TecraTube that is the idea to make subs and view for money not working free magnet generator .
if it had been easy a long time ago, it would have been built by much smarter engineers than him
Наебалово😂