there something wrong here.,the cord cable 3.5 mono is for the passive output connector for the speakers..and the stereo balance cord 3.5 is for the aux input for your laptop or mobile phone..
I assume people who buy this product doesn't do research about audio stuff they just want a good sounding one how stupid. one line mono audio two lines stereo audio Black line is the Positive connection Silver part is the Negative connection
Haw can balenced work with the cables going into the active speaker dusint the passive speaker end up unbalenced i dont get it most balenced speakers ive sean have the cable going into each speaker ?
Maybe this is a stupid question but how do I get audio to play out of both speakers at the same time? I know there's a switch to set the active speaker being left or right but how do I get it to play out of both at the same time?
@@FendiPendergrass yo i just plugged the red and white cables in da back into my computer and + the 3.5mm from the left to the right speaker and it worked :)
Use a 3.5 stereo jack splitter..also 2x twin R.C.A cable phono leads. one phone lead goes to the sub the other to your speakers and then plug them both into the stereo jack & the stereo jack to the computer were u would normally put your speakers.hope this will be of help to you
@@Mefisto0901 would i still be able to control the volume through my interface when doing the sub woofer this way? the issue im having is that my MM- Audio air interface does not connect to my m audio bx3 graphite speakers. so far im good on sound and recording but the mixer connected to interface isnt working
None of them. These are PC speakers not meant for music production and they are completely unsuitable for it. But both models are quite good PC speakers.
Hi, the 120 watt power outfit refers to the peak output both speakers are capable of together. Please note that the constant power capability of each speaker is 25 watts.
Hello! Thank you for the video. Very helpful! Can anyone suggest 6.35mm TRS inputs? I want to connect the monitors to a audio interface. Please advise. Thanks again. Appreciate your efforts and time. Rock rock on!!!
@@ionrage if referring to me I had them straight to my DAC pre-out. I've since added a mackie big knob passive between and all is good now. Have actual control over volume and not just whisper or screaming
there something wrong here.,the cord cable 3.5 mono is for the passive output connector for the speakers..and the stereo balance cord 3.5 is for the aux input for your laptop or mobile phone..
I assume people who buy this product doesn't do research about audio stuff they just want a good sounding one how stupid.
one line mono audio
two lines stereo audio
Black line is the Positive connection
Silver part is the Negative connection
@@KYLE_TABUZO so u mean there is NO stereo separation at all???
I have a question regarding the 3.5mm to RCA cable. The RCA end, does that connect to the speaker or the audio interface?
Hi, the RCA end will connect to the audio source you desire.
is this speakers have background noice?
Haw can balenced work with the cables going into the active speaker dusint the passive speaker end up unbalenced i dont get it most balenced speakers ive sean have the cable going into each speaker ?
balance input meaning from source to the input of the speaker minimizing noise or interfenrence.
@@wahaduharmoni7149 to the input of the active speaker you mean. i agree thats confusing
Maybe this is a stupid question but how do I get audio to play out of both speakers at the same time? I know there's a switch to set the active speaker being left or right but how do I get it to play out of both at the same time?
same issue dawg
@@suicider1014 idk what I did but I just rebooted my computer and they both started working!
@@FendiPendergrass yo i just plugged the red and white cables in da back into my computer and + the 3.5mm from the left to the right speaker and it worked :)
u gotta have an interface
I’m using an interface but still have the same problem with balances cables
I have a question.
Tell me the length of the power cable？
How would you connect a subwoofer with this?
Use a 3.5 stereo jack splitter..also 2x twin R.C.A cable phono leads. one phone lead goes to the sub the other to your speakers and then plug them both into the stereo jack & the stereo jack to the computer were u would normally put your speakers.hope this will be of help to you
@@Mefisto0901 would i still be able to control the volume through my interface when doing the sub woofer this way? the issue im having is that my MM- Audio air interface does not connect to my m audio bx3 graphite speakers. so far im good on sound and recording but the mixer connected to interface isnt working
Would anyone recommend this for a turntable?
does it work on a desktop computer (just a tower) please
Yes, they do. It does not matter at all, what type of computer you use.
is better bx3 or bx4 for music production?
Bx4 would be better imo
None of them. These are PC speakers not meant for music production and they are completely unsuitable for it. But both models are quite good PC speakers.
@@tedraven9214bro tf u saying there?💀 These are made for music prod. and multimedia stuff
Is each speaker 120-watt or is that for both? like 60-watt each or something?
Hi, the 120 watt power outfit refers to the peak output both speakers are capable of together. Please note that the constant power capability of each speaker is 25 watts.
@@BestBuyBlog Thanks for tge reply. Appreciate it.
do you prefer this bx5 or yamaha hs5?
yamaha Hs5 sounds like an empty wooden box
@@robotman7945 I use an empty wooden box. Its pretty good.
Hello! Thank you for the video. Very helpful! Can anyone suggest 6.35mm TRS inputs? I want to connect the monitors to a audio interface. Please advise. Thanks again. Appreciate your efforts and time. Rock rock on!!!
Not wireless?
so I can connect an unbalanced cable direct to a laptop?
They are junk, you have to turn the volume all the way up to hear anything
funny enough i've got the opposite problem. I can't turn mine up more than 1/4 of the way or its blowing your ears out loud.
Would you mind go over how you have these connected? connected from an audio interface?
@@ionrage if referring to me I had them straight to my DAC pre-out. I've since added a mackie big knob passive between and all is good now. Have actual control over volume and not just whisper or screaming
@@moosescorner I dont understand, are you guys using the balanced inputs or unbalanced???
Are you using the balanced cables from audio interface or the unbalanced red and white cable?