I love how you show all in the meet. It looked like a good show. Lots of vintage equipment. Thanks for going out and giving the rest of us something good to watch. Thanks
Nice, thanks for sharing. I haven't been to this hamfest since it was in the Marshall community building that was on west side by I-69 interchange. I took my extra exam there. The building is now private property.
I thought I saw you there! I actually ended up buying those S-40s you featured and that really nice one does need an alignment, but is still a superb receiver as is. I ended up getting a lot of good deals there, your hypothesis about the economy would make sense, it seemed like a lot of vendors had lower prices just to try and make some sales
Nice Ham festival. ? Used a 12". 8 ohm speaker to test a 350 SWR bass amp. And it cooked it😢. How can I test amp without burning up speakers. I don't have a scope. Should I check for voltage at output jack ? No blown fuses. Is it's the caps? I cleaned the jacks and circus board pretty good. S.O.S.
Check for DC voltage before you connect a speaker or a test load. If you have DC voltage at the output more than tens of mv then you have a problem with the output transistors. You can use an 8 ohm resistor rated for the amps output power as a test load if you don't want to risk the speaker.
Hope you feel better Terry. Did you get a Gordie Howe hat trick at the stadium? (Goal, assist, and fighting penalty), lol. I bought a Tenma 72-1095 isolation transformer shortly after seeing my first D-Lab video.
Some of the happiest, most outgoing, jovial and seemingly "doing pretty good" people you may know can be tortured inside. To the point of an indescribeable personal madness they have no choice but to contain.
That so called,10 meter/CB Base is a Piece of Junk and Illegal on any band in the USA. It’s easy to identify a Legal 10 meter radio because they will not have Noise Toys built into them. I don’t know of any model of Ranger that is Type Accepted other than the 5054 DX & 5054 DX 100 for 6 meters. They do include a Roger Beep in them but not any Echo or Reverb garbage.
Thanks from kc2wvb. Have not been to a fest in 10 years. It was fun watching.
You do the BEST hamfest walk throughs!
Thanks for a great video appreciate it so much
Thanx N6TLU. Always enjoy these. Feel better. 73
I love how you show all in the meet. It looked like a good show. Lots of vintage equipment. Thanks for going out and giving the rest of us something good to watch. Thanks
I miss going to the ham fest. thanks for doing one.
Fantastic! At 42:54 a Galaxy V! I have one these with PS! TNX for sharing! 73' from BRASIL
Great video sir
Great community
Nice, thanks for sharing. I haven't been to this hamfest since it was in the Marshall community building that was on west side by I-69 interchange. I took my extra exam there. The building is now private property.
Special tour!
I love one of the Engel mics
I wish the Hamfests around here were that well stocked.
Terry doing what he does best at these shows, schmoozing. Never stop doing it Terry. Hope you get better .🤧
I have to wait until August for my local HamFest, all 4 hours of it.
Great to see your trying to get sellers to display contact info I am thinking about contacting W8UAB for the asking price on his Orion
I thought I saw you there! I actually ended up buying those S-40s you featured and that really nice one does need an alignment, but is still a superb receiver as is.
I ended up getting a lot of good deals there, your hypothesis about the economy would make sense, it seemed like a lot of vendors had lower prices just to try and make some sales
Great on those S-40a's I had one when I was 12. Have a few around here, just no time to refurb them
Hope you feel better soon brother
At minute 37:04 repeaters and contact info?
If it's true to form all the really good deals were gone before the doors open.
1:12:35 Terry buy me the two Heathkit.🥺
Did you get any contact info on the Motorola repeater and the APX that where on a center table?
The 900mhz amp and GTx radios at minute 26:11?
And the Motorolas are 1:07:54 time stamp need his contact if yiu have it
There was a dx400 Texas Star amp if yiu know whom had it
smarshamfest@gmail.com This is the e-mail for the Ham club. I do not have info on sellers
👍👍
Do you ever find new old stock EL34 and ECC83 Mullards at swap meets?
Not in years...
I learn about these swap meets after the fact.
When is the next one ?
Do you remember price on the SP600? I hardly ever see at hamfests.
I think he wanted $700
Milk $7.50 a gall9n gas $4.86 a gallon here 8n Alaska
You know you've made it when you enter in the rear of the Mamfest swap meet. Congratulations! Will you still talk to us.
Nice Ham festival.
? Used a 12". 8 ohm speaker to test a 350 SWR bass amp. And it cooked it😢. How can I test amp without burning up speakers. I don't have a scope. Should I check for voltage at output jack ?
No blown fuses. Is it's the caps? I cleaned the jacks and circus board pretty good. S.O.S.
Check for DC voltage before you connect a speaker or a test load. If you have DC voltage at the output more than tens of mv then you have a problem with the output transistors. You can use an 8 ohm resistor rated for the amps output power as a test load if you don't want to risk the speaker.
Are we going to see you at the Toledo Hamfest next Sunday the 19th?
Great Sir RAFIQUE MASTOI DG Khan Pakistan 🏝🇵🇰🇵🇰🇵🇰🇵🇰🇵🇰🇵🇰🇵🇰🇵🇰❤
The price tags that I could actually see were similar prices to eBay prices. The sellers probably took most of their offerings back home!
@3:50 you’re always DX’ing with a BIG Johnson
Hope you feel better Terry. Did you get a Gordie Howe hat trick at the stadium? (Goal, assist, and fighting penalty), lol. I bought a Tenma 72-1095 isolation transformer shortly after seeing my first D-Lab video.
We’re is the miss left her home
if that guy was selling that bird. I bet it cost a pretty penny. they are hard to come buy.
Some of the happiest, most outgoing, jovial and seemingly "doing pretty good" people you may know can be tortured inside. To the point of an indescribeable personal madness they have no choice but to contain.
Arthritis?
I know those Itis boys and Arthur is about the worst of them.
Take care of it now, Terry. If you let it go, you'll regret it.
That so called,10 meter/CB Base is a Piece of Junk and Illegal on any band in the USA. It’s easy to identify a Legal 10 meter radio because they will not have Noise Toys built into them. I don’t know of any model of Ranger that is Type Accepted other than the 5054 DX & 5054 DX 100 for 6 meters. They do include a Roger Beep in them but not any Echo or Reverb garbage.
Sad in a way -a dying hobby - no young crowd - just od people - like me
Me too, Feeling the old guy pains