Still Going... Project Comancheep!
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- Project Comancheep Continues!
Ep 20: Prequel - Project Comancheep... • Prequel - Project Coma...
•Ep 21: Still Going… Project Comancheep!…Still Going... Project Comancheep!
Ep 22: Redneck in the Garage doing Nothing - Project Comancheep...Redneck in the Garage doing Nothing - Project Comancheep
Ep 23: I Got Shafted By My Own Axle Shaft!…I Got Shafted By My Own Axle Shaft!
Ep 24: How Does a Clutch Work? - Project Comancheep...How Does a Clutch Work? - Comancheep Project
Ep 25: Will Bread?? Remove a Pilot Bearing?...Will Bread ?? 🍞Remove a Pilot Bearing?
Ep 26: Project Comancheep - Make Your Own Seat Slider Brackets...Project Comancheep - Make Your Own Seat Slider Brackets
Ep 27: Can I Mix and Match Brake Boosters and Master Cylinders for Project Comancheep?...Can I Mix and Match Brake Boosters and Master Cylinders for Project Comancheep?
Ep 28: My Automatic Transmission Came In…My Automatic Transmission Came In 😘🤩🤩
Ep 29: My Window Won’t Roll Up - Easy Fix - Project Comancheep…My Window Won't Roll Up - Easy Fix - Project Comancheep
Ep 30: A Most Unique Comanche Bumper - Project Comancheep -Part 1...A Most Unique Comanche Bumper - Project Comancheep - Part 1
Ep 31: I Have Wooden Shackles! - Project Comancheep…I Have Wooden Shackles! - Project Comancheep
Ep 32: How to Mount a Tire Bigger than you can Carry and What is the Wheelbase of the Comancheep?…How to Mount a Tire Bigger than you can Carry🤯 and What is the Wheelbase of the Comancheep?🙈
Ep 33: Sharks!…Sharks! 🦈🦈
Ep 34: A New Day - The WARN Bumper Gets Finished!...A New Day - The "WARN" Bumper Gets Finished!
Ep 35: The Beast! - Operation Comancheep…The Beast! - Operation Comancheep
Ep 36: Jeremy Takes Over My Garage - Project Comancheep…Jeremy Takes Over My Garage - Project Comancheep
Ep 37: How to Make Your Own Battery Cables the Easy Way…How to Make Your Own Battery Cables the Easy Way
Ep 38: Chevy Spindle Bearings Pro Tip…Chevy Spindle Bearings Pro Tip
Ep 39: The LS Comancheep Starts for the First Time Ever!…The LS Comancheep Starts for the First Time Ever!
Ep 40: How to Install Floor Pans in project Comancheep!...How to Install Floor Pans in project Comancheep!
If a BleepinJeep video has ever helped you consider returning the favor by:
• Supporting us on Patreon here: / bleepinjeep
•Buying a T-Shirt Here: www.bleepinjeep...
•Or Just leaving a kind comment on FB here: / bleepinjeep
This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee XJ, wrangler TJ, wrangler JK, or any Jeep vehicle, especially the newer Fiat ones. How-to videos may be too intense for some viewers and children under 30 years of age. Please remain seated until the 4x4 ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in Bleepinjeep mirrors may be farther than they appear.
![เปิดบ้าน พี่ตูน Bodyslam หลังใหม่คนแรก ที่ภูเก็ต l [Nickynachat]](http://i.ytimg.com/vi/flFwcmyDQSk/mqdefault.jpg)
I don’t own a off road vehicle, i’ve never driven off road and i don’t think i ever will.
I don’t even work much on cars, i find it fascinating watching clever people with skills make things though and that’s why i watch.
Now i found your channel during the detailed scorpion build so at least you gained one subscriber because of that,
I might not be the right category of veiwer but i love your work and will hang around as long as you create.
Guess that’s something... 😊
punkloader exactly same here I started watching as the scorpion was coming about and haven't stopped yet and won't if Matt can keep up the good work
You're saving that MJ, not destroying it. And it's going to be amazing!
Thanks!
I really enjoy the technical work ! Tube setup. I learn a lote ! Please share more if you can how to
Watched the whole video... Even watched all of the ads... even the one at the end, right in the middle of Matt's outro... Keep it up Matt, you've brought it back alive... it might look like Frankenstein, but it's going to be a beast.
Loving this project. Can’t wait to see it crawling
Keep up the great videos, and the detail work as well. If people don't like it, they can skip through those parts, but if you don't add the details, then all of us that like to learn tricks and tips miss out. Thanks!
You did save it. otherwise, it'd still be rotting in a salvage yard or turned into a cube.
Like I said before, watching these videos is like a mini adventure. :)
I liked the tube work videos on the scorpion crawler
great job! I envy your tube skills! & this video made me hungry for more! 👍
I enjoyed the scorpion crawler format. Very informative. The comanche is good but its lacking the bleeping jeep feel i am use to.
brian murphy I agree. Jumping around is very confusing. I would like the videos to be in order.
They are in order...
I think Matt is feeling the TH-cam-er pressure to give fans what they want to see but needs to remember not to let looky Loos influence too much of his content...... Absolutely loved the entire scorpion build
Never click away from one of Matt's videos, you might miss out on something good. Like, how to make a urinal for your shop from a simple funnel. Or in this case, how sleeving tube in a compound bend situation can greatly simplify the job.
I don't have a problem thinking.. I'll never do this... I have the opposite problem.. every time I see you do something I haven't done.. I want to buy the tool and do it!
Hi Matt. If someone is interessted in offroad and fabrication he will watch this videos. They are so well done. For example i would never search for a video of making a car hotdog heater but in your case i loved it. Go on with your videos. I would miss something. Wishes from Germany.
This channel is the only channel I watch on TH-cam because of the fab work. I think the reason you lost viewers is because you stopped pulling fish out of the exhaust and topping off the blinker fluid!
Now you need another Comanche so I can see what you'll create when you're not rushing. Can never have too many Comanches. And as far as those complainers out there, it's not their truck. They didn't spend the money on it, so they don't have a say in what happens. Better than it rotting away or getting crushed.
I love all your videos especially the tube work ones. For whatever reason it’s really satisfying. Keep up the 👍🏻 work man this thing is 🔥
Hey Matt keep up these tube bending tips and tricks. They are priceless!
the tubing work and fabrication is what brought me to this channel the more detail the better as always👍👍👌
Your a artist Matt... Looks Beautiful! Keep it up my friend.
My heart still goes out to that poor CJ but I love these Comanche videos. Thanks Matt!
Nice build, as most guys working in their own garage, strive to get better and learn new tricks or tips. Lots of info on the internet about how to build an off road vehicle, but none of them tell or show the lil tricks that it takes to build to that potential. Props Matt like the content of your videos a lot 👍🏻
Your comment about clicking off the video is very true.... hell I have learned a shit ton from your videos! Heck I use them when I'm fixing stuff. Sure I might not be building a tubed cage but at least I learned something! There should be a Bleepin Jeep college! It would be a success!
Tube work is fascinating. It's a skill that applies to 4X4 and track racing equally.
Your fabrication is getting better and better. Congrats!
I sat here and watched the entire video for the exact reason that Matt stated earlier...that you never know if and when you may need to have some knowledge of working with tube. Then 10:22 happened and I laughed like a prepubescent school boy and giggled til the end of the video.
I always look forward to the videos, especially the tube works ones. Anyone can show you how to bolt on a lift, not everyone can show you everything else on your build.
Bleepin Jeep for Life !! Cheers buddy !! Your the best !!
I love the tube stuff
Quick tech question for you.. I have a 96 jeep Cherokee xj sport 4.0 4x4
I want to regear to 4.11s question is I don't know if I have a 27 or 29 spline pinion.? The vin number doesn't disclose that. Problem is the only way I have to find out is to take out my pinion and count them, this is my daily and I don't want to do the job until I have all my parts. Any help would be appreciated!!
Thanks!!!
I own a Comanche. Anybody that is mad at you for doing this doesn't quite grasp what owning one is like. Have rust? There are no dedicated patch panels. There has been small runs for certain things like long bed bed sides and rockers, but they are rare and usually expensive. Cab corners rotted away? Your ONLY choice is to either A- cut them off another Comanche or B - have insane metal working skills to fab up new ones. Anything behind the cab? Doesn't exist. The Comanche is like every other Jeep Truck, almost zero dedicated aftermarket support, and the supply of NOS parts is very thin. I love my Comanche, but it is frustrating to own one sometimes.
Holy crap 2nd comment and ive got nothing clever to say
I don't know why people would click away. I don't ever plan on bending tube or building a cage, but watching you do this stuff has still taught me a bunch of fabrication stuff I didn't know before and it has given me the confidence to build my own bumper with a swing out tire carrier, install the lift on my TJ myself and a bunch of other things. If someone clicks away then it is their loss.
The last video had two men drilling hard wood... I'm concerned what this one will have in store for me >.>
I honestly like this pipe/ fab work
Comanche saved at the cost of the CJ. The sad part of me wonders what Matt would have done to the CJ since it was such a beast to begin with, then we saw him drive it.
The comancheap was meant to be or Matt would be upside down on fire somewhere in the CJ.
RIP CJ
None of you watched the entire video yet!
Ummm after video comment(after mid video comment lol) I've never done tubing and that whole sleeving bit was a good learning experience.....p.s. just bought a for now lift for my zj an iron rock 4" $150 woot it'll get me down to Rubicon this year with my buddies and work until I upgrade to Clayton 7" long arm lift and everything done right... 4" not what I wanted but it'll do for now :)
The SCORPION PROJECT was when I began watching. Your probably getting more done doing updates vs. play by play. Keep up the great work Matt!
If I could have opted to watch Leonardo Devinci work I would have . But since there is only you. I'm in ! Love the work. Wish you would have done these vids on order. Just the right blend of technical and "cool as shit' thanks
They are in order except for the one on pushing out the roof.
Matt, if you don't have one a deburring tool is really helpful to have and it's cheap. You can get a nice Noga deburring tool on Amazon for about $13 and it will make deburring holes and other parts really easy. Your hole saw trick worked well, but maybe a deburring tool will come in handy for other situations around the shop.
I like when you explain things, even the tube work. This series of videos has been all over the place, back and forth and its been a little hard to follow. Love your stuff so basically even if you go full on Quinten Tarentino on us I'd still watch.
Keep it coming!
Matt, very well put together informational piece on the tube bending, great tips. I wasn't gonna click away anyhow, I just know your gonna do something witty.
I like tube work videos like this. I am currently in a roll cage project myself so I am drawn to videos like this. Thanks and keep them coming.
Make it streetable and get on ultimate adventure
Man these short vids with hardly any meat leave me hungry for MORE! ;) Thanks anyways, though, Matt!
Havnt seen all the scorpion videos yet but i like your tips tricks and so on! Im going to start my first rig this winter and its just a basic off roader but the details that bite ya are well exsplained and reasoned. Thanks for all that!
Jeep looked really good this wkd,great job..
Glad you build jeeps better,than you ride bulls..lmao
putting lift springs on an XJ is like second nature to a lot of us now. So videos where your doing tube work, or real technical work are the absolute best.
I’m still mad you cut up a jeep for a wanna be jeep/ wanna be buggy/wanna be a truck
ive noticed the vidoes were kinda scattered around but keep trucking on it. can't wait to see that thing rolling down the trials in a month! 👍👍👍
You're right, I will never bend tube for a project like thay. But I do watch anyway. Good stuff!
LOOKIN AWESOME MATT,THOSE MULTI ANGLE BENDS CAN BE A NIGHTMARE!!!🔩🔧🔩
11:04 ? am I missing something? wouldn't a quick rub with a file do that?
the tubework is what im most intetested in
I don't miss tube work. Sold my bender a couple of years ago and haven't looked back.
Looking good matt
Inspired me to do a SAS in my geo tracker hoping to finish it this weekend 👍
Enjoying the tube work. That's up next once I finish the hybred Comanche/2dr XJ body splice.
I've been watching in amazement from day one. Your vids have been extremely helpful in restoring and upgrading my 98 XJ. My camo headliner would have been a disaster if it wasn't for the how to you did. Fun to watch for sure. Just finished converting my rear drums to disks. Would love to see your take on that. Or maybe a fuel injector upgrade for a 4.0L. Keep up the good work. You have far more fans than haters.
Matt the rig came out awesome.I seen it in Moab .
That thing is looking crazy. Really would love to take on a project like that someday. Cant wait to retire my sad old TJ and get a newer one in better shape. Question though, where do you get all that tubing at without breaking the bank? I've looked around and places like metal supermarket want a fortune for tubing, or are prices just crazy on them?
It's pretty expensive, I'm paying $6 a square foot for my dom
Thats not far off from what they were saying. Anywho, great project.
I would love to do a half an half build! Show us every minute of fab. Love to watch!
That would be super boring as mostly I'm just looking around for the right tool
Its coming along great. :)
I need to go back and watch the Scorpion build. Your tube work is awesome! Cool tips you showed in this video. I'll never do anything like that, but it's cool to see how it's done. Great skill you've got there.
thanks! try this one, its pretty good: th-cam.com/video/3PvqtREO9mo/w-d-xo.html
Like a lot of people here are saying, I for one love watching your videos. The longer the better. It's more time learning about something that your inspiring me to do on my own. I will never be able to post a video on it cause I'll be spending my time working on my jeep. I don't have the talent to be able to catch the entire thing on camera and have it make any sense at all.. You have talents Matt, That not many have or grasp. You make videos that are entertaining and educational. Keep up the great work!!
Thanks man!
Hey Matt, those who are upset need to stop and think about it!! It could have been in a CRUSHER!!!! But you like any good gear- head rescued it instead!!! So all the as#wh#$es who are whining should just get some cheese to go with their wine and deal with it!!!! Keep on keeping on!
Como se llamada tu comanche????
Yo quiero saber
Keep it up Matt looking forward to the top secret zj kind of biased because mine is a 96 zj with a 4.5 inch lift on 33’s love em.
Im going to school for engineering and. My dream is to build my own offroad 4x4. Im going to school for welding but watching your videos is me seeing the dream i am chasing. Thanks so much matt
Love your work ill never click away! Cant wait for next vedio
Looking Great and waiting for the next video ! Keep up the good work !
Great intro scripting! Was that Jessica Rabbit I saw? I slept on the issue with the tube bending angles and had a thought. The lasers used for making level lines in construction. You put these things on a wall and they show level lines across the wall automatically. If there is a device you can put on the tube bender that shoots a programmed angle and when you see it line up on the tube you are at the correct angle.
Tell me you re doing vertical truck-like exhausttt
Plsss🙏🙏
let's hope not....
Moving right along Matt! Hope the back half of the build includes the box sides too give more of a Comanche feel.
you do sick work bro and you talk like mr Rogers with a welder
That rear stinger literally gave me diarrhea.
I'm really digging the aesthetic you've got going on this project. Good work!
2:46 push hard lol. I was pushing a big turd out at the same time.
Well I must say this build is pushing my to get a jeep, looking for a Cherokee now!!!
Lovin the intro!! Awesome job on makin this all fit and work! Dyin to see it finished and crawlin.
I was skeptical about destroying a bad ass CJ. Mine eyes are open bleepn jeep lol. Well done as always Matt!
Probably not gonna be doing to much tub work, but still love watching your vids!
I absolutely love the videos explaining what you're doing! I'm actually about to build my XJ or a ZJ here VERY soon thanks to You! My question though is, would you rather build a 99xj or a 95zj 5.2l? Ive pretty much got my mind made up already just wondering what you'd choose!
Straight 6 99 XJ
BleepinJeep really?! Man, I'm going tomorrow to possibly trade my xj for a zj, let me explain, money is a big issue, so, I have D60 Front and Sterling 10.5 rear from a 99 ford, and 40" tires, the zj already has 4pt coils and bigger engine, so there is no need for a subframe or engine swap. That's my point of view lol. Do you think xjs look meaner than zjs? Cause I do, i just feel it'd be cheaper and easier to do this to a ZJ rather than an Xj
The in depth fabrication vids are the best vids tho :/
Lots of great tips! Enjoying the videos!
I like what you are doing. Great tube work.
invest in some cogsdills instead of using that holesaw
I need me a Comanche
I would rather have more details, than not!
What kind of Step bits do you have? Brand-wise. I've never had any and I would like to try them. I was thinking Harbor Freight but I'm afraid they're just going to be colossal pieces of shit that last 2 holes
Honestly I'm super cheap and buy them on geek.com or hr. They work ok.
fuzzy wuzzy those harbor freight Warrior - Item#96275 step bits have been amazing for me. I built a gottrikes tubing bender that required a crap load of holes to be drilled in 1/4" to 1" thick material. I used them in a drill press and kept them lubed with chainsaw oil. They still cut pretty good. The regular harbor freight drill bits are complete garbage though.
Love the rc wheels on your photoshop mockup. Lol
excellent work. What patience u have.
Looks awesome
should do a rear mount radiator if it's going go do deep mud work
I actually really enjoyed the scorpion crawler vids. When are you going to start the shipwrecked project?
Soon. Sometime soon.
Nice Job. This has been fun to watch!
How did you do that sketch of your rig? Did you use a certain program @5:51
I used photoshop
Or you put a roll cage inside and outside
Damn I wanted to hopefully see you well that round pipe together with the crazy tight space. Must be all test fitted and welded off the cab maybe !?
Awesome video as usual thanks.
gotta get creative with the welder.
your front drive shaft should stay the same i would think?
Take it on Truck Night in America when it’s finished!
Shaun Barrickman lol that show is so sad and hard to watch. There’s not even any rocks to crawl...
Great video btw!