@@TheITWay I'll look into it. The plan probably is to complete Cisco Meraki training: Zero to Hero which I suppose will give me a foundational knowledge and might help me in the interviews, right?
hi, i really like your videos. just wanna know the followings: 1) do meraki devices support tunnels formed with non meraki devices? 2) how does Meraki Wireless Qos work, is it applied for both upstream and downstream? 3) how meraki site to site tunnel work in terms of wireless ? thanks
Hello @AjAyChAn, Let me help you with your queries: 1) Yes, the MXs can stablish VPN tunnels with Non-Meraki VPN peers, you can see the video on how to configure Non-Meraki VPN tunnels and how to troubleshoot it below. th-cam.com/video/BwCtY3rln4c/w-d-xo.html th-cam.com/video/WJNUImcWfWg/w-d-xo.html 2)Yes, it is applied on both ways as long as the wireless client tag the frames with the appropriate QoS 3) I did not quite understand your question. The site to site VPN tunnels can be established between a MX and another device. The APs are not able to establish any VPN tunnel to a non-Meraki device. Let me know if that helps you.
Hi, Thanks for your wonderful sessions. it was very helpful to understand the Meraki systems and how its working. I would like to know, are there any more videos to come to this playlist or this is entire series?
Hello AMEENUDHEEN, I am glad that you found the videos useful! I will continue uploading videos on how to configure features, troubleshooting tips and automation steps regarding Cisco Meraki devices. Stay tuned because the training for the Cisco Meraki certification is coming!
Hello Mustafa, It is not enough at the moment, very soon you will see new things coming with a full list of the necessary videos to cover all the exam blueprint. Stay tuned!
Hello @bigjohn67791, The Cisco Meraki devices do not use Cisco CLI. In fact, they do not have any CLI to be used. Their main option to monitor and make configuation changes for these devices is the dashbaord.
Hello, I have a consult with the Meraki MX, we can enable the OSPF on Meraki MX? and create a static route with SLA? i have 4 MX450 and i need 2 data center but i need to have HA in both sites, you can help me with this questions?
Hello @Hugo, The Meraki MX only support OSPF for advertisement of remote VPN subnets. The MX has a feature to create static route and use some metrics to enable/disable them in the route table. You can find more information in the links below. documentation.meraki.com/MX/Site-to-site_VPN/Using_OSPF_to_Advertise_Remote_VPN_Subnets documentation.meraki.com/MX/Networks_and_Routing/MX_Addressing_and_VLANs Regarding the deployment you mentioned, I would recommend you to check the following documentation. documentation.meraki.com/MX/Deployment_Guides/Datacenter_Redundancy_(DC-DC_Failover)_Deployment_Guide
Hello @Mihir, If I have your API Key, I can use a software like Postman and make API calls to retrieve information or even make changes on your organization. the only element I need to access your dashboard is your API key. You can go to your organization and profile, enable the API access on both and download Postman software in order to start playing around with this technology. You can go to Help> API Docs in your dashboard for more information.
The only way to regain access is going through the documentation below or calling to Support for further guidelines. documentation.meraki.com/zGeneral_Administration/Managing_Dashboard_Access/Locked_Out_of_Dashboard
Hello UsedComputersDOTorg, Very hard one to know. The best you can do is call Cisco Meraki support and explain to them in detail what has happened and see how they can help you. Ensure to have all proof of purchase with you.
Hello Can anyone tell me can I use Poe switch for networking to connect computer's... Will it sense and stop the power supply to non PoE device's?? Am planning to buy Cisco Meraki Go 48 port PoE Switch.. Thanks
Yes if the switch is compliant with the 802.3 PoE standards. With 802.3af/at or better compliant switche,s PoE power is only delivered if it is negotiated by the device that is connected. No device request, no negotiation = no power. If you are still worried you can disable the PoE on a port by port basis. really no need to worry though. If you have a switch that uses proprietary PoE read the documentation.
The first two videos of this series are not useful. Please start the setup instead of talking unnecessary things like mistakes. People need to make mistakes so they can learn from it
You are the only one in the internet with a video on this important Meraki tips, awesome.
Glad it was helpful!
Great video series, watching the entire playlist. ✌
Thank you. I hope you enjoy the other ones as well!
Very informative! Thank you!
Delighted that I have found your channel - I am about to watch all your Zero to Hero training - thank you!
Hello Philip,
I hope you enjoy it!
@@TheITWay Are there any new updates on the course or this is more like an updated version of it?
@@shreeraj3719 you can see the details of the new guide in the description of the new videos I have posted in the last month.
I hope youenjoye them!
@@TheITWay I'll look into it. The plan probably is to complete Cisco Meraki training: Zero to Hero which I suppose will give me a foundational knowledge and might help me in the interviews, right?
@@shreeraj3719 It will help you understand how the Cisco Meraki Portal is and an overview of the configuration panels.
Wow this was really helpful as someone who is just starting to use Meraki, very little good information out there, thanksyou Sir !
Glad it was helpful!
Very useful! I have made few of those and I have seen lots of people doing those mistakes... great to have them summarised in this video 👍🏻
Can we do meraki without ccna ????
can you please tell me at 1:06 , which model is this ? is it with cellular slot also does it support auto failover ?
Very good info bro.
Having a video explaining what meraki is and what is it's purpose in an infrastructure as well as advantages/cons would be usefull
hi, i really like your videos. just wanna know the followings: 1) do meraki devices support tunnels formed with non meraki devices? 2) how does Meraki Wireless Qos work, is it applied for both upstream and downstream? 3) how meraki site to site tunnel work in terms of wireless ? thanks
Hello @AjAyChAn,
Let me help you with your queries:
1) Yes, the MXs can stablish VPN tunnels with Non-Meraki VPN peers, you can see the video on how to configure Non-Meraki VPN tunnels and how to troubleshoot it below.
th-cam.com/video/BwCtY3rln4c/w-d-xo.html
th-cam.com/video/WJNUImcWfWg/w-d-xo.html
2)Yes, it is applied on both ways as long as the wireless client tag the frames with the appropriate QoS
3) I did not quite understand your question. The site to site VPN tunnels can be established between a MX and another device. The APs are not able to establish any VPN tunnel to a non-Meraki device.
Let me know if that helps you.
@@TheITWay thank you! Videos are great. Hoping you to put up some more videos on MDM & Wireless part & more on use cases thanks.
hi, thank you for the video, can i ask how to remove client or release dhcp before lease time runs out on meraki ? thankss
I'm glad I found you. Thank you....!
Hi, Thanks for your wonderful sessions. it was very helpful to understand the Meraki systems and how its working. I would like to know, are there any more videos to come to this playlist or this is entire series?
Hello AMEENUDHEEN,
I am glad that you found the videos useful!
I will continue uploading videos on how to configure features, troubleshooting tips and automation steps regarding Cisco Meraki devices. Stay tuned because the training for the Cisco Meraki certification is coming!
@@TheITWay can meraki be done without ccna please guide .??
Thanks alot that is very informative
Hello @abu Ziad,
Thank for watching. Keep tuned in for the future videos!
is this training enough to get Cisco Meraki Solutions (ECMS 500-220”
Hello Mustafa,
It is not enough at the moment, very soon you will see new things coming with a full list of the necessary videos to cover all the exam blueprint.
Stay tuned!
Can I use Cisco Cli commands as an option on these boxes?? If I want to configure it that way without the GUI
Hello @bigjohn67791,
The Cisco Meraki devices do not use Cisco CLI. In fact, they do not have any CLI to be used. Their main option to monitor and make configuation changes for these devices is the dashbaord.
Yes, I removed all serial numbers from the boxes before throwing them into the bin.
Great to hear Sesom!
Hi, can you guide in one of your video how to be prepared for Cisco Meraki exam. Is there any study material like cert guide ? Or just documentation ?
Hello Rafal,
I'm in the process now to bring those resources to everyone. Stay tuned!
This dude solid and the video is mad old 😂
It is old and still relevant!
Hello, I have a consult with the Meraki MX, we can enable the OSPF on Meraki MX? and create a static route with SLA? i have 4 MX450 and i need 2 data center but i need to have HA in both sites, you can help me with this questions?
Hello @Hugo,
The Meraki MX only support OSPF for advertisement of remote VPN subnets. The MX has a feature to create static route and use some metrics to enable/disable them in the route table.
You can find more information in the links below.
documentation.meraki.com/MX/Site-to-site_VPN/Using_OSPF_to_Advertise_Remote_VPN_Subnets
documentation.meraki.com/MX/Networks_and_Routing/MX_Addressing_and_VLANs
Regarding the deployment you mentioned, I would recommend you to check the following documentation.
documentation.meraki.com/MX/Deployment_Guides/Datacenter_Redundancy_(DC-DC_Failover)_Deployment_Guide
great advices. Thank you
You watched the entire video, learned about mistakes, and finally didn't subscribe. Well that's another big mistake.
Thank you for the support Fabian!
Awesome content. Subscribed!
Hello Eric,
I am glad you liked it!
Hello I just bought a Meraki I need help
Can you maybe contact me or add me to a Skype chat my number is +264813558100
Hello Benno,
You can DM me here in TH-cam if you need some help.
Step 5 👍🏻
I want to know if somebody get api key how they use with Meraki dashboard
Hello @Mihir,
If I have your API Key, I can use a software like Postman and make API calls to retrieve information or even make changes on your organization. the only element I need to access your dashboard is your API key.
You can go to your organization and profile, enable the API access on both and download Postman software in order to start playing around with this technology. You can go to Help> API Docs in your dashboard for more information.
Mihir, you can watch this tutorial: th-cam.com/video/J48Avi2hPEY/w-d-xo.html
Please add 5 mistakes in descriptions with time stamp
No
What if I made mistake 2? What's the cure? I can't login to the dashboard, please help.
The only way to regain access is going through the documentation below or calling to Support for further guidelines.
documentation.meraki.com/zGeneral_Administration/Managing_Dashboard_Access/Locked_Out_of_Dashboard
No
I fixed it with the help of my colleague.
He deleted my access and re-added.
So no support from Meraki was required.
I Bought 80 switches off ebay for my tech company and everything works perfectly and i saved 85%. i guess i got lucky
Does anyone know if Cisco will help you if you accidentally exposed your serial number in an eBay ad and someone claimed your device
Hello UsedComputersDOTorg,
Very hard one to know. The best you can do is call Cisco Meraki support and explain to them in detail what has happened and see how they can help you. Ensure to have all proof of purchase with you.
Hello
Can anyone tell me can I use Poe switch for networking to connect computer's... Will it sense and stop the power supply to non PoE device's?? Am planning to buy Cisco Meraki Go 48 port PoE Switch..
Thanks
Yes if the switch is compliant with the 802.3 PoE standards. With 802.3af/at or better compliant switche,s PoE power is only delivered if it is negotiated by the device that is connected. No device request, no negotiation = no power. If you are still worried you can disable the PoE on a port by port basis. really no need to worry though. If you have a switch that uses proprietary PoE read the documentation.
Once a device is claimed it can not be claimed by another org. Meraki will not unclaim a device even if you prove you own it.
.
Hello C 137,
That's a hard battle to face with Meraki Support. I would prefer avoid that and take preventive measures.
Mistake #1: buying Meraki
Not clear voice. Echo in your voice. Thank you,
Se nota que el pana es Dominicano ajajaj
Hasta la tambora!
just a suggestion, perhaps you should carve out agenda and stick to point. I would prefer reading CVDs than this video
The first two videos of this series are not useful. Please start the setup instead of talking unnecessary things like mistakes. People need to make mistakes so they can learn from it
Mistake #1: buying Meraki