Love the exhaust or fuel debate going on.. both ways make sense from a cooling stand point. “Tip” mount cooler/big filter left side of tanks. The bit that’s above the tank that’s flat. (looking from front of car) Increase Runtimes. Decrease flame out chances when upside down. Happy modeling
The cooler needs to go in the exhaust side buddy They way you had it if you look at the size of the hole on the cooler that the fuel tube gose onto it’s very small so it was making the engine run lean if your with me
@Haggard RC lol it's just supposed to help keep the heat down in the fuel tank. I've never ran one but always wanted to try it for shits and giggles. Just wanted to comment. I'm from Ohio in the US so your videos definitely get out there. I've been a subscriber for awhile now and like the videos
I’ve always wanted to visit Ohio, that’s so kool you’re all the way over there 😂 but yeah it’s clear those coolers are nothing but a con I think lol. My one was supposed to be a filter as well but it’s obviously not 😂
Yea it's supposed to go on the return line off the exhaust it's supposed to cool the the return pressure ND keep the tank cooler buts unfortunately it's just a gimmick doesn't do anything ur engine not going to run any cooler just a way companies take ur money
there is just something on that mp9 i still want get one but i should start looking places where to get runing rc... im still waiting my shocks to my inferno neo 3.0 i did buy em like over 4-5 months ago and i still dont have them. but they should arrive this year so yeah maybe i sell few electrix until i find good place to drive rc cars
You don't happen to know if the HPI G3.0 fits on the Rush do you? The 15FE on mine needs a new piston/sleeve. I can get the piston/sleeve or for a couple more dollars get the G3.0. I know the T3.0 fits but no one has them in stock
The crankcase on the g3.0 is much larger than the t3.0 even if u get engine mounts the g3.0 just doesn't want to work on the rush belive me I tried everything the long sg shaft on the g3.0 doesn't help either
@@samsonight2721 Damn. Thanks for the information. Guess I'll have to wait to see if HPI restocks the T3.0 or just bite the bullet on a new piston/sleeve.
You may want to consider spacing the release of your videos out. If you release them all too close to each other you're actually going to be sniping views from your own videos. Best thing to do is release a video, wait till the initial bulk of viewing dies down and then release the next one.
Thanks for that, I upload on Monday, Wednesday and Fridays at 05:00 usually on my other channel. Today I had these 3 videos sitting there so I just uploaded them to get rid of them 😂
Love the exhaust or fuel debate going on.. both ways make sense from a cooling stand point. “Tip” mount cooler/big filter left side of tanks. The bit that’s above the tank that’s flat. (looking from front of car) Increase Runtimes. Decrease flame out chances when upside down.
Happy modeling
MORE MP9 🔥🔥🔥
Cooler on wrong line should be cooling the exhaust gases going to tank
Yeah? That’s seems strange but I’ll note that.
Knowledge is wisdom.
The cooler needs to go in the exhaust side buddy
They way you had it if you look at the size of the hole on the cooler that the fuel tube gose onto it’s very small so it was making the engine run lean if your with me
Very strange, why cool it a fuel cooler then? It’s a fume cooler 😂 and a pointless one at that lol
@@HaggardRC yeah that is a good point
But that’s what the things dose 👍 love ya videos though
The cooler is supposed to go in-between the pipe and tank lol but great video. I always enjoy watching the content.
So people have said, that’ll go in the bin lol a fuel cooler that cools fumes? Load of rubbish
@Haggard RC lol it's just supposed to help keep the heat down in the fuel tank. I've never ran one but always wanted to try it for shits and giggles. Just wanted to comment. I'm from Ohio in the US so your videos definitely get out there. I've been a subscriber for awhile now and like the videos
I’ve always wanted to visit Ohio, that’s so kool you’re all the way over there 😂 but yeah it’s clear those coolers are nothing but a con I think lol. My one was supposed to be a filter as well but it’s obviously not 😂
@Haggard RC yeah I think that's why I never bought any. I just didn't really see how it would really make a huge performance difference lol
Never mind 🫣
The cooiler i have has a screw on it. Its the high speed needle from carb. Why you think that is.
Hi buddy how are you doing happy new year. Looks good 👍. Why don't you get any electric cars like I have buddy.
Great information too.
Yea it's supposed to go on the return line off the exhaust it's supposed to cool the the return pressure ND keep the tank cooler buts unfortunately it's just a gimmick doesn't do anything ur engine not going to run any cooler just a way companies take ur money
Yep. If they did anything the pros would be using them
there is just something on that mp9 i still want get one but i should start looking places where to get runing rc... im still waiting my shocks to my inferno neo 3.0 i did buy em like over 4-5 months ago and i still dont have them. but they should arrive this year so yeah maybe i sell few electrix until i find good place to drive rc cars
Yeah good idea mate MP9s are great cars
You don't happen to know if the HPI G3.0 fits on the Rush do you? The 15FE on mine needs a new piston/sleeve. I can get the piston/sleeve or for a couple more dollars get the G3.0. I know the T3.0 fits but no one has them in stock
The crankcase on the g3.0 is much larger than the t3.0 even if u get engine mounts the g3.0 just doesn't want to work on the rush belive me I tried everything the long sg shaft on the g3.0 doesn't help either
@@samsonight2721 Damn. Thanks for the information. Guess I'll have to wait to see if HPI restocks the T3.0 or just bite the bullet on a new piston/sleeve.
You may want to consider spacing the release of your videos out. If you release them all too close to each other you're actually going to be sniping views from your own videos. Best thing to do is release a video, wait till the initial bulk of viewing dies down and then release the next one.
Thanks for that, I upload on Monday, Wednesday and Fridays at 05:00 usually on my other channel. Today I had these 3 videos sitting there so I just uploaded them to get rid of them 😂
@@HaggardRC other channel?
💯😊👍👍👍
You guys can’t come on here telling Ben he got it wrong 😂
Question is, did I? I’m all for learning lol to me a fuel cooler cools fuel, not fumes lol. That dude was on a wind up I reckon 😂
@@HaggardRC I was on a wind up lol
😂😂😂😂😂
There a load of rubbish them coolers and filters usually cause more problems than there worth usually most tanks have a filter in them
Lol Ur not wrong. All filters I use seem to unscrew and leak fuel everywhere 🤪