Making Cat 6 Cables with Klein Crimpers & Pass Thru Ends
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- Making custom RJ45 Cat 6/6A cables has never been easier. With high quality connectors from Platinum Connector and Klein tools latest crimpers - you can quickly and easily make great patch and long run cables at home or on the road. I've recently put out a few videos on networking and have a couple more - so make sure to subscribe and enable notifications if you like this content.
Considering getting tools for your own cabling jobs? Using the link below helps this channel with a small commission.
Klein Pass Thru Crimper (VDV226-110) 🛒 amzn.to/3Ii2Ivp
Monoprice RJ45 Cable / CAT 6 (1000ft) 🛒 amzn.to/3P8n0ts
Platinum Pass Thru Ends (50 cnt) 🛒 amzn.to/3usdZUq
Klein Advanced RJ45/Coax Tester (VDV501-851) 🛒 amzn.to/3Rfac6L
My Amazon Shop 🏪 amazon.com/sho...
Credits:
Music: Artlist.io
Editing: Vengeance Edits ( / editsvengeance )
#rj45 #networking #passthru
Had the materials and the tools for almost a year and decided today was the day to work on the new install out in my party barn. Watched the video this morning and used the straightforward and well-presented info to complete several cables to connect my TV and SONOS sound bar to the internet. I have 8 more cables that I need to do out there to finish hooking up all the systems. Thanks for the great video.
Far out! Glad it helped you and that your project was a success. Wired is the way to go for long distances or backhauls.
@@TheNetGuy I fully agree with your wired comment...I use it everywhere it is practical.
Exactly. Though I have to admit I have a 1/4 mile wireless link between buildings only because Ethernet wasn’t practical and fiber too expensive 😜
2:50 I’ve had this for about 6-8 months and I always wanted to lock it in place to store it properly in my bag and thanks to your video I didn’t know that if I crimp it slowly it locks in place…finally!
Thank you! I've been trying to create my own Cat6 with this same tools, watching other videos on YT and you broke it down perfectly. I created my first one while watching this video and pausing when I needed to. Used my tester and it passed! Great work!
Bought the wire and tools a few months ago to wire my whole house up, but haven’t had time. Being iced in gave me that time and went as smooth as can be. Thanks for the help!
Thanks for the video; while I know you made this months ago, i just used it today and your demo worked like magic. I wouldn't mind knowing a bit more how to 'relax' the cables as easily as you made it sound. probably just need to practice more!
I am not in this industry, so I've never needed to make these. Until today! And your video was hugely useful. Was gifted this tool for Christmas last year and they DO work great.
Yay! Glad it helped!
Cool tool! Wish I had one 40 years ago. Thanks for making this video.
man i love that passthrough plug. all i have are the non pass styles, and yeah it's really tough to get solid sheath crimps when you are first starting out and figuring out the lengths and whatnot. this is SO much better
Just bought the model down from this one, gonna try it out soon when I do my POE WiFi access points. Thanks for the vid!
Thank you😊
The “string” inside the cable is actually for “ripping” the sheath open along its length to prepare the cable pairs for “making off”. ✌🏻👍🏻🇬🇧
You are giving an amazing show while delivering top quality content. Awesome job man!! Kudos!
Thank you for the kind words!
@@TheNetGuy Hello, can you just use an old school (cat 5 era) crimper with these pass-through mod heads and then just neatly snip off the excess wires coming past the crimp / terminals ..? ...or will the cut off end be sloppy and interfere with a good plug in connection ..?
@barrya.6212 you can, with a very sharp pair of scissors, cut off the excess after it is through and pull it back just a little into the crimper, so it doesn’t stick out. The biggest problem is if you don’t cut it flush, it could push the connector out of the housing.
@@TheNetGuy Thanks N.G.
Super easy and great video, thanks!
Awee 🙏 😊
cool work man .. thank you very much for sharing this .. I have the same exact tool .. Klein Tools .. havent used it yet.. I wanted to run a cat5 cable for my internet from the house to my shop .. now I know how .. I appreciate that.
Thank you so much.
you should do a good comparison between the cheap Chinese clones of the RJ45 Klein tool and other alternatives
Good call!
Please do not use the crimper to remove the jacket. You can nick the conducters. Buy a separate tool that slightly scores the jacket. I can see from the video the crimper completely penetrates the jacket. The "string" is technically called a RIP CORD. Also pass throughs while convenient, are really the worst type of RJ-45s. Having exposed copper on the end of the plug all in a row like that is terrible for NEXT. And the termination was far from perfect, there should be no more than a 1/2 inch of untwist. You could have organized the wires better, and massaged them further into the plug.
Tell us how you really feel 😜. Good points for pro crimps.
Pass throughs are easier to work with, but more prone to failure. Ask any *seasoned* professional.
@ 4:58 "like this" is that clip side up?
Always clip facing away from you. Easier to see the colors too 👍
Does it even matter the colour code? I mean....as long as both ends are the same??
Yes and no. The pins can be of any color but the pairs matter for shielding. Since you may not be able to see both ends in a large building or long run install it’s recommended to follow the pattern. Additionally wall keystone blocks follow a standard which makes it easier to punch down vs random wires. 👍
Thank you. In the B standard. It appears that the green pairs are separated. Im sure there's a reason. Can you elaborate on that?
@@stix87yes, the transmit and receive wires actually flip ends when the cable is inserted, so send/receive pairs unit on each side. This is also how POE and auto negotiation work. So you can use any colors, just the pin outs need to be the same.
@@TheNetGuy thank you! I appreciate the reply! This is great!
My pass throughs don't cut the end ones, orange/white and brown, the cutting blade is too short. Annoying for the price.
Are you using the Klein Tools crimper that he shown in the video? If so, one thing I learned yesterday is if you bought the Cable Matters cat6 passthrough connectors, they work terribly with these crimpers. The moment I tried out a Klein Tools cat6 passthrough connector, I no longer had any issue with it making clean cuts.
@@Mrperson0 Mate great bit of info. I'll get some.!!!👍
Bro you used the A not the B. A for America B for Britain 🇬🇧
But i'm sorry but you went too fast When color coding your wires
Oops sorry. It’s printed on most Crimpers including these. Make sure you use the “B” standard in the US.
I suck at this shit
You’ve got this. Good tools and pass thrus make it easier!