Very nice tutorial. The only thing that I'd add my two cents into would be the portion of drilling the holes. I've found it easier to find and mark the studs and the approximate location of where the mount will go. From there, predrill and then secure one corner of the mount. I then level the mount up and mark the other three holes. That way I have a perfectly level mount with no holes that are 1/8th or so off. You have yourself a new subscriber, BTW.
Dude my mother tongue is Spanish but I am fully bilingual and men I can tell you, I didn’t realized that it was dubbed to Spanish nearly after 3 minutes of watching it, I don’t know what you are doing but it is awesome and I loved it excellent video
Remembering when flat screens first came out how bulky/heavy they were and it was a very daunting challenge to mount them back then. Today, TVs are very light and mounting them shouldn't be as daunting as before.
For those who are curious, if you are sitting 2m-2.3 meters away from the TV you have a tolerable error margin of approximately ≈20cm (before factoring in mount functionalities), in the placement of your mount. This is assuming the video-poster is correct regarding the 5degree rule in order to avoid feeling neck discomfort.
I was looking for a video on how to install a tv mount on a drywall with resilient channels. Do you have that or what ‘s your recommendation to successfully accomplish that? Thanks
Thank you for the great video. I have one of the large SANUS wall mounts and a 85 inch tv weighing 135lbs being mounted above a fireplace mantle, where the hook point is at 90 inches from the floor. How do you get an 85 inch, 135 lb TV lifted up that high? The Samsung TV I have has the SANUS hardware with the hook point 12 inches from the top of the 43 inch tall TV. I know a couple guys can lift it up to a reasonable height, but how do you safely lift it that high?
I feel like no tv mounting videos discuss how to work with the studs to put the tv where you want (not just going with wherever the studs are). Any tips?
@@vincelorona4026that’s how I mounted the wall bracket. I bolted 1/2 inch plywood (18” x 18”) to the stud, painted it to match the wall, then attached the wall mount to the plywood
I watched a video and it said the optimum mounting height for a TV is the bottom needs to be 42" off of the floor. Not that I follow that, but use it as a rule of thumb depending on the situation.
I always use the top of the nearest light switch cover as an arbitrary height to line up with the bottom of the tv, for general wall install of anything bigger than 75.
That's a good way to do it if your mounting holes don't match up with your studs. My house has studs on 24" center and the bracket I bought secondhand is narrower so I'll need to bridge across the studs to create a good mounting plate. I think I'll use a 2x board lag bolted to the wall studs, then I'll be able to mount the wall bracket to that. It'll be hidden behind the TV. If it's a large, heavy TV I don't trust OSB not to crumble if there's nothing but wall board (drywall) behind it.
My wall has 24" studs. Where we would like the tv is off a bit to hit those studs. Any suggestions, or do they make a mount that spans more distance so I can move the tv over more?
If it’ll span at least one stud, I’d go with that and use heavy duty drywall anchors (like the 75 lbs each variety) for the other two holes. Of it doesn’t touch a stud at all, four to six of those drywall anchors will be plenty strong for any modern TV, or you can look at bracing the area between the studs. You could even mount a piece of plywood to the studs and mount the TV mount to that.
I like how simple u make it and to the point thanks I was going to use those toggle bolts lol on the drywall 😂 I’m sure that was going to be a good idea
Hello there, loved the video, this grandma got the TV wall mount done thanks. QUESTION: You said you were going to put the description of the TV wall mount you got off Amazon. I don't see it. Can you send Please. Thank you
How did you check if there was romex, conduit or pipe running through the stud where you drilled? I am thinking about drilling 1/16 to 1/8th inch at a time and then will look inside the hole with a flashlight and see if there is a cavity where romex or pipe may be running through. Thoughts?
The only thing I would like you to show is that kind of bolt you use , I always get the center of the stud , but I use toggle bolts , can you show the kind of bolt you used? I know what to use when is wood studs but metal studs are different
Thanks sir for sharing this video watching from Canada 🇨🇦 actually this is helpful vedio i have to install my wall mount tv 60" inches sizes so again thank you for sharing 😊
We don’t have that issue and have had the treadmill for probably ten years, but it’s super loud and also the screen occasionally blanks out toward the end of a run. I guess I expect some of that after so many years.
This sounds too complicated.I don’t have stud finder can I do it without it?Sorry for the stupid questions but I have limited space in my room.I don’t have anyone to help me mount the tv
Here’s my dilemma, and maybe y’all can offer some input… 1.) Where things are right now- Currently, I have a 42” TV in my office/fun room, on a wall mount. Said wall mount is positioned 6.5 ft. above the floor (IF that’s of any importance). Moving on… In addition to a Dish Net Joey, there are also TWO video game 🎮 consoles hooked up to the TV. One evening, I was playing a game ON said TV, but suddenly, I had an epiphany (moving on here)… 2.) Changes warranted- In order to get the full benefit of “maximum gaming performance and enjoyment”, I need a larger TV …😊!!! I’m thinking, somewhere in the vicinity of 65-72”. Now, in order to do this, I’m thinking that a wall mount that can sustain something in the vicinity of 200 lbs. will give ME piece of mind. My concern I’ve been building up to is THIS: -I like where the wall mount is, but w/o getting into TOO much detail, bottom line, I have….concerns regarding gravity and stability!!! -I’ve done measurements to see if said TV w/ said measurements will fit in office/fun room, so no problem THERE❤️🤍💙. -The TV I want IS 💯% video game 🎮 compatible (If I wanna WATCH-but not PLAY-TV, I’ll go into the living room. So again, all good there. Again, I just have reluctance with trusting the stability of the NEW wall mount in the ORIGINAL spot. All input and advice GLADLY welcome 🙏… CHEERS 🍻🍻🍻🍻🍻🍻🍻🍻
I think tv installers videos should specified if the studs are wood or metal , since depending on the material , is the kind of anchor that you would use , and some people that has no knowledge of that , can get confused and use the wrong anchors
Mentioning that studs can be 24 inches apart instead of 16 would have been nice, new mount I bought is useless. Sure I should have done my own research but if I’m looking at an instructional video about this then that means that I am obviously ignorant on the matter and would have been nice to be informed. Have to return this Mount and buy one compatible with 24 inch studs. Thanks though I guess. (I’m a lil salty)
Verubgood video i mounted 1 today but to a brick wall i find it easier pre drill bolt it using bolt and wall plugs then hook bars to tv then hang of course it wernt that easy
....how many command strips would I need tho 🤔
😂
2
😂😂😂
All of them.
A complete grid on the back
Very nice tutorial. The only thing that I'd add my two cents into would be the portion of drilling the holes. I've found it easier to find and mark the studs and the approximate location of where the mount will go. From there, predrill and then secure one corner of the mount. I then level the mount up and mark the other three holes. That way I have a perfectly level mount with no holes that are 1/8th or so off. You have yourself a new subscriber, BTW.
Smart af
3
Dude my mother tongue is Spanish but I am fully bilingual and men I can tell you, I didn’t realized that it was dubbed to Spanish nearly after 3 minutes of watching it, I don’t know what you are doing but it is awesome and I loved it excellent video
Remembering when flat screens first came out how bulky/heavy they were and it was a very daunting challenge to mount them back then. Today, TVs are very light and mounting them shouldn't be as daunting as before.
20 dollar ONN mount at walmart works great for me. 75 inch tv
Every one needs a strong hand...that little hand is why I liked and subscribed good video :)
Great video, thank you! I’m a disabled vet so I’ll have to pay for someone do it for me, but it’s good to know to do it properly. 👍🇺🇸
Great video and easy to follow. Plus I love that NO WASTED comments.
Very thorough! Thank you for sharing, I feel like I could finally mount my tv onto the wall now! 🥳
The little hand 🤚 😂😂 , great video! Thanks
How tall are you? To give me a better reference on how high to mount my TV. Awesome, clear, consice video...thank you...
Should you avoid studs near outlets?
For those who are curious, if you are sitting 2m-2.3 meters away from the TV you have a tolerable error margin of approximately ≈20cm (before factoring in mount functionalities), in the placement of your mount. This is assuming the video-poster is correct regarding the 5degree rule in order to avoid feeling neck discomfort.
Jesus'
Ok
my brain has an intolerable error from reading this message
I was looking for a video on how to install a tv mount on a drywall with resilient channels. Do you have that or what ‘s your recommendation to successfully accomplish that? Thanks
Is this VESA compatible? Would like to get this for my 65" Phillips Roku flat screen TV. Just wanna make sure it will work together.
With the option of wall anchors that individually hold >= 90lbs plugged into standard drywall, is it absolutely necessary to anchor to studs?
YES. dont trust those drywall anchors with your expensive tv. just play it safe with studs. theyre your friends
I'm going to hire a task rabbit for this
Thank you for the great video. I have one of the large SANUS wall mounts and a 85 inch tv weighing 135lbs being mounted above a fireplace mantle, where the hook point is at 90 inches from the floor.
How do you get an 85 inch, 135 lb TV lifted up that high? The Samsung TV I have has the SANUS hardware with the hook point 12 inches from the top of the 43 inch tall TV.
I know a couple guys can lift it up to a reasonable height, but how do you safely lift it that high?
haters gon hate, this video helped me a lot with my first tv mount. thank you!
I feel like no tv mounting videos discuss how to work with the studs to put the tv where you want (not just going with wherever the studs are). Any tips?
Get a 2x4 drill it into the studs and then you can connect the tv to the 2x4 wherever you want
@@vincelorona4026 whose doing all that
If part of your mount is only landing on one stud, you can use toggle bolts. Ensure you get the ones for the appropriate weight.
@@vincelorona4026that’s how I mounted the wall bracket.
I bolted 1/2 inch plywood (18” x 18”) to the stud, painted it to match the wall, then attached the wall mount to the plywood
@@beautifullybrokenempress6631it’s 2 extra screws….
I watched a video and it said the optimum mounting height for a TV is the bottom needs to be 42" off of the floor. Not that I follow that, but use it as a rule of thumb depending on the situation.
I always use the top of the nearest light switch cover as an arbitrary height to line up with the bottom of the tv, for general wall install of anything bigger than 75.
What a timely video! Bringing home my new tv right meow.
Happy TV hanging, brother!
@@LRN2DIY do I need a new tv mount but already have one?
@@LRN2DIY can I uses any new or old tv mount for a 39 inch tv
@@donovanburrell2354 As long as the mount supports the TV’s weight, sure. It also has to be compatible with the mounting pattern on the back.
@@LRN2DIY thanks man
I use a piece of OSB as a ledger. I mount the ledger to the studs, and then mount the TV bracket to the ledger.
That's a good way to do it if your mounting holes don't match up with your studs. My house has studs on 24" center and the bracket I bought secondhand is narrower so I'll need to bridge across the studs to create a good mounting plate. I think I'll use a 2x board lag bolted to the wall studs, then I'll be able to mount the wall bracket to that. It'll be hidden behind the TV.
If it's a large, heavy TV I don't trust OSB not to crumble if there's nothing but wall board (drywall) behind it.
My wall has 24" studs. Where we would like the tv is off a bit to hit those studs. Any suggestions, or do they make a mount that spans more distance so I can move the tv over more?
If it’ll span at least one stud, I’d go with that and use heavy duty drywall anchors (like the 75 lbs each variety) for the other two holes. Of it doesn’t touch a stud at all, four to six of those drywall anchors will be plenty strong for any modern TV, or you can look at bracing the area between the studs. You could even mount a piece of plywood to the studs and mount the TV mount to that.
I like how simple u make it and to the point thanks I was going to use those toggle bolts lol on the drywall 😂 I’m sure that was going to be a good idea
it’s not a bad idea if you don’t have studs as an option
Did you plug the TV in on the outlet that the mount covered?
Following ?
@@ineffablele9744yes that’s why it was there
These ideas worked great thank you for sharing them.
Hello there, loved the video, this grandma got the TV wall mount done thanks. QUESTION: You said you were going to put the description of the TV wall mount you got off Amazon. I don't see it. Can you send Please. Thank you
How did you check if there was romex, conduit or pipe running through the stud where you drilled? I am thinking about drilling 1/16 to 1/8th inch at a time and then will look inside the hole with a flashlight and see if there is a cavity where romex or pipe may be running through. Thoughts?
There should be metal plates there. So if you feel a lot of resistance when drilling that should be your clue.
The only thing I would like you to show is that kind of bolt you use , I always get the center of the stud , but I use toggle bolts , can you show the kind of bolt you used? I know what to use when is wood studs but metal studs are different
It would be nice if you would’ve shown how do you put everything on the T.V. in the beginning.
Any tips if i want to mount my tv on a partition made out of wood? Im planning to install swivel mount
Thanks sir for sharing this video watching from Canada 🇨🇦 actually this is helpful vedio i have to install my wall mount tv 60" inches sizes so again thank you for sharing 😊
Hey I just got that treadmill too but it’s pretty janky (at the legs, the covers hit the conveyor belt thing) did you run into the same issue?
We don’t have that issue and have had the treadmill for probably ten years, but it’s super loud and also the screen occasionally blanks out toward the end of a run. I guess I expect some of that after so many years.
What about wiring in the wall?
Does that wall have metal studs or wood studs ?
Lol
Good lord
Did the bolts you used to fix to the wall come with the wall mount?
What kind of stud finder was that?
Very helpful!
Harbor Freight has a full range of motion mount for $40 and they are really well regarded
You can use spacers also
What to do if studs are too far apart for wall mount brackets?
Great video as always
Does the outlet need to be behind the bracket? I would think it can be below it too since the tv is large enough to hide it?
Muchas gracias.
Si, rodeos, facil y rapido. 💫🙏💫
What model hisense?
What if I only have one stud there the tv is supposed to be and the other ones are 24 inches apart?
If you use the bottom of tv as a reference, measure from the bottom of the tv to the top holes on the mount
My house is a 100 years old - there know studs - just plaster and lathe. Any suggestions?
There will still be studs running vertically but the spacing may be different. The lath and plaster sits between the studs.
Jesus Loves all of you guys
Do you have to use the stud scanner?
No it just helps find studs
My wood studs in the wall are 32inches apart
What do I do ?
It would have been nice to have showed how to place the mount on the TV as that is part of the mount process.
HELPED ME THANKS - MAT
Thanks!!
Sadly, my bedroom had 24" on center not 16". So my 75" TV is essentially supported by a single stud.
You can fix that by installing a ledger board that spans 24” then attach the mount to the ledger
@@ZeroColdx911 I'd have to tear the walls open, wouldn't I?
Some mounts support both 16 and 24" interval studs.
@@MikeFuryTech no you don’t, it’s just a piece of wood mounted on top.
I had the same problem. I put up a hardwood backboard and trimmed it up with quarter round moulding.
Thanks for the video
Forget the tv you have new exercises tool
I'd love to see you start using PPE (safety glasses minimum) you may not make mistakes but your viewers will.
Thank you
Your affiliate link for the TV mount redirects to a single gang electrical box. May want to check that. I was interested in which model you were using
This sounds too complicated.I don’t have stud finder can I do it without it?Sorry for the stupid questions but I have limited space in my room.I don’t have anyone to help me mount the tv
What exactly are studs? You referred to them a lot in the video and I don't know what it means.
Vertical strong wooden beams behind the visible wall that support it.
If you don't know what studs are, you shouldn't be drilling into the wall for massive lag bolts cuz the risk of catastrophe is high.
I put the pencil in my ear for increased handy man ability as well
Great video
Thankyou!
Does size matter
Which tv mount is this
Links are in the description.
So why the measurement of 17 inches? I didn't see yuu incorporate or mention it again during the process
Here’s my dilemma, and maybe y’all can offer some input…
1.) Where things are right now-
Currently, I have a 42” TV in my office/fun room, on a wall mount. Said wall mount is positioned 6.5 ft. above the floor (IF that’s of any importance). Moving on…
In addition to a Dish Net Joey, there are also TWO video game 🎮 consoles hooked up to the TV. One evening, I was playing a game ON said TV, but suddenly, I had an epiphany (moving on here)…
2.) Changes warranted-
In order to get the full benefit of “maximum gaming performance and enjoyment”, I need a larger TV …😊!!! I’m thinking, somewhere in the vicinity of 65-72”. Now, in order to do this, I’m thinking that a wall mount that can sustain something in the vicinity of 200 lbs. will give ME piece of mind.
My concern I’ve been building up to is THIS:
-I like where the wall mount is, but w/o getting into TOO much detail, bottom line, I have….concerns regarding gravity and stability!!!
-I’ve done measurements to see if said TV w/ said measurements will fit in office/fun room, so no problem THERE❤️🤍💙.
-The TV I want IS 💯% video game 🎮 compatible (If I wanna WATCH-but not PLAY-TV, I’ll go into the living room. So again, all good there.
Again, I just have reluctance with trusting the stability of the NEW wall mount in the ORIGINAL spot.
All input and advice GLADLY welcome 🙏…
CHEERS 🍻🍻🍻🍻🍻🍻🍻🍻
Great video. Automatic sub and good choice with the coke haha 👍🏻
very good
This was a good tutorial! Thanks! ❤️🙏🏻
How far does the tv sit from the wall when using this mount?
my drill isn't big enough to drill in the lag bolts?
I think tv installers videos should specified if the studs are wood or metal , since depending on the material , is the kind of anchor that you would use , and some people that has no knowledge of that , can get confused and use the wrong anchors
He didn't use anchors
Gracias Toni Kross por el vídeo
Mentioning that studs can be 24 inches apart instead of 16 would have been nice, new mount I bought is useless. Sure I should have done my own research but if I’m looking at an instructional video about this then that means that I am obviously ignorant on the matter and would have been nice to be informed. Have to return this Mount and buy one compatible with 24 inch studs. Thanks though I guess. (I’m a lil salty)
You can attach a ledger board that spans 24” then install the mount to it
@@ZeroColdx911 bold of you to assume I know how to do that lmao. It’s cool I just returned it and got a compatible one.
Not to brag but I got a TV mount at Menards for $25 and holds up to 220lbs 💅🏻
What about a wall mount that u can tilt up and down
Verubgood video i mounted 1 today but to a brick wall i find it easier pre drill bolt it using bolt and wall plugs then hook bars to tv then hang of course it wernt that easy
😂😂😂😂the thumbnail goes crazy
Bro used his strong hand to do all this lol
Yea I’ma just hire someone to do this
Your TV is only as a secure as your mounting screws in the drywall doesn’t matter that match how much that bracket can hold
Know how to this but always watch can always improve.
I always find the stud when i stand in front of a mirror.
Thanks that was useful for me.
I'd love to see one of these done into brick or concrete.
Would be essentially the same process, except you don't need to look for studs! Just get some tapcons and drill out your holes
That’s actually easier !! Because you have a solid base
I miss floor model tvs
if that's a workout room I hope you're mounting a pull up bar next, cause you failed the flex arm hang test 🤣😛
I think I can I think I can
I just wanted to see u hang off it LOL
I came for the great instructions. I stayed for the Coke.
I got my 200lbs bracket from Walmart for $23.
And what if the drill won’t go deeper than an inch on every wall in your home as if it’s made of metal?
Sounds more like concrete walls. If that be the case, you'll need an impact driver to drill through. It basically hammers while drilling.
If the ladies don’t find you handsome they should at least find you handy
The little plastic hand!😂😂😂
thanx dad😅😅😅
Show it to us