Hi, recently a good friend of mine gave me a 70-in TV for free, he told me that the only thing I have to do is just buy a TV mount because he was keeping the one he already had mounted on his apartment wall for his new TV he already bought. This TV didn't have the four legs to put it on a table either, so I bought the right TV mount but I needed to know how to install it, I saw a few videos on TH-cam and when I watch yours I was convinced that you were exceptionally clear on what you were saying with perfect English and made it very easy for me to understand, then I followed the steps and I have my I should say free beautiful TV mounted on one of my bedroom' wall, I like to thanks thank you for such good explanation on this video and I really appreciate it, thanks again, Jorge from Havana Cuba 🇨🇺 bye-bye 👍
Been coming back to this very same video for the last couple of years when I need to wall mount a new TV. Thank you for your on going help with a video that is a few years old!!!
For those of you that dont have a stud finder: Find an electrical outlet there will be a stud either right next to it on the left or right next to it on the right (the hard part is knowing which exact side the stud is on) then measure 16 inches away from it that will be the center of the next stud. If you dont have a nearby electrical outlet, find a magnet and slide it on the wall it will stick when it is on a stud.
@@glossybyjae9393 most stud finders detect the edges of studs. So, you mark the 2 edges of a stud you find, but measure and mark your actual hole in the middle between those 2 marked points for a secure square spot to drill in. Do this for each stud.
I wouldn't recommend using drywall anchors to mount a TV that size. Studs are typically 16" apart. If you can't mount the frame to studs then perhaps you should anchor a couple of 2"X2" wooden boards to the studs then mount the frame onto those boards.
Thank you, as a lady DIY-er I'm nervous attempting this, I've been putting it off for months. But your tutorial is one of the best I've come across and I'm way more confident in doing this myself now. I just ordered my mount and leveler (I have the other tools necessary). Here's hoping for the best 🤞🏾
@@Sarah-m17 Hello! Getting back to you on this. Long story short, I did it today!! I took a couple weeks to get the tools and waited for a day I was stress free to get it done. A few things: I ordered a much cheaper mount, also from Amazon basics, that holds 132lbs for only $49 bucks (surprisingly). My T.V weighs less but I wanted a strong mount to idiot proof myself. My mount is slightly different than his, but watching this video gave me the confidence to read the manual lol. Honestly, it's not that bad at all, the manual directions were easy to read with clear images. I only got confused at one part but figured it out after a bit. I was most nervous about the drilling. I would not suggest using a high-power drill to put the brackets on your TV like the video. You can screw the bracket on by hand with a normal Phillip's screwdriver. The drill into your TV is not necessary at all, it's overkill and you may damage it if the drill is too powerful. But you definitely need the drill for the wall. Luckily I was able to use my stud finder and got the positioning right. You'll need help to lift the TV to the mount. Other than that this was a pretty easy small project. It sounded way more intimidating than it turned out to be and I saved almost $200! If you haven't already, don't pay to have someone screw and drill a few holes, most people can do this on their own. I'm glad I watched this video, it was helpful as a demonstration. Ok this was still a long story haha, take care!
Figuring out the height or where to put the tv is very important. I installed living room TV way too low using the eye level recommendation. I'm about to move it up about 10-12 inches so that the tv center is center from ceiling to floor
Make sure you screw into studs. Do not use drywall anchors only. My neighbor did, and the tv fell off after a few months, pulled off drywall, destroyed the tv.
I recently bought the Mounting Dream Soundbar mount and found it to be quite good and inexpensive. Next time I need a TV mount, I'll look to them for it. I could have saved a ton of money.
@@LadyDimePiece4Eva What FireRose meant is when you find the two stud, which are vertical and spaced equally or according to the code, and will be like | | that You can buy 1x3 or other size lumber and secure that lumber to the stud making a H, |---| and you can mount the bracket to the lumber in the centered. This way, you can have the lumber secured to the studs and center the mount from the wall or space you want on the stuff and the TV will block the offset behind it.
Thanks for the easy to follow step by step instructions. I was stuck on that first unboxing part for what seemed like hours !!! But seriously this was very helpful . Thank You
you are absolutely the best at explaining .The other men were horrible and had too man tools. No butter knife or hammer. I still hate the stud finder. I grew up with real walls but alas I find myself needing one.What also is nice about you is you use naked screws . those other buffoons wanted me to use weird screw stuff. . Thank you for not being a TV Mount Weirdo.
After seeing the TV hanging past the door frame, I cut to the chase and bolted mine to the door itself. Seemed very high as well. Perhaps they like sore necks over the pond?
Some tips: Get a small drill bit, less than 1/16”, and drill a series of holes across the stud width to make sure you hit the centre of the stud. Lag screws don’t work in steel studs. If you need to use anchors, you MUST use SnapToggles. You will be extremely unlucky if you hit a water line or wire inside the wall but it could happen. There isn’t a sensor made that accurately tells you they’re there. The only thing you can do is drill slowly and remove the bit often. Put a screwdriver in the hole and, if it comes to a dead stop, chances are you’re still drilling wood. If it feels suspect, abandon the location. Wrap some tape around your bit to tell you your hole depth. No sense drilling deeper than necessary. If your screws or bolts come with a hex head, use a socket.
Yeah man this video skimmed over the most important part. The part that makes it nervous for DIYers. Dem stud finders are not fool proof. He didn’t say anything about marking the sides of the studs so he could screw into the center. Can’t just start drilling where the finder signals.
So I have a question In my country most walls are made of concrete, and when I moved to Canada I noticed that most of the walls here are not made of concrete (not sure if it’s ply wood or what is it), so my question is: should I drill the wholes exactly where the studs are located, or should I try to avoid drilling where the studs are located? Might be a silly questions but it’s something new to me Thanks in advance!
The walls could be plywood, sometimes MDF, and a lot of time 'fibro'. In any case, you should always drill into the stud - its the only way to ensure the weight of the TV will be sufficiently supported. I recently ran into an issue of the studs not lining up with where I wanted the TV and the holes on the bracket. My solution which seems rock solid was to get most of the weight supported via the stud, then use a number of drywall anchors for the rest of the bracket for added security. This might not work in your case, but I hope it shows some work arounds that are viable! 🙂
Bolts have major and minor diameters. (Major - Minor) = length of thread. If you drill a hole equal to major diameter, the entire bolt will fit inside the hole and you don't want that. Hence, drill a hole slightly larger or equal to minor diameter, which will result in atleast 75% engagement of threads into the stud. Since the minor diameter information is readily available on internet for any screw/bolt, no approximations are required. Hope this helps :)
UK & late to the party; if you're studs don't fall so you may place the TV centrally on the wall, you can always mount 2× horizontal battens eg 2×4" to the studs (as long as they are less than the TV width, & attatch bracket to that.Used to fitting on solid walls but definitely a good trouble-shoot, guys. Great tutorial BTW. All best wishes 😊
I think tv installer videos should specified if the studs are wood or metal since depending on the material is the kind of anchor you would use , and some people That has no knowledge of that can get confuse and use the wrong anchors
You start on the lowest number then check for snugness. If it has any play or movement, set to the next number up; you only need it to be secure not overly tight.
I wouldn't bother using a drill to tighten screws. It barely takes much longer to use a handheld screwdriver and then you can feel when the screw is tight enough.
Thank you for explaining this project in such a clear way. Your step by step tutorial has motivated me to do this in my bedroom. I will use your video as a guide to make sure I mount my TV properly. Thanks again
If your trying to center it on the wall and don’t have studs that line up to do it you can install some horizontal lumber between the studs you have and anchor to that. The hole you make for the lumber can be patched and the repair will be hidden behind the mounting plate and the tv.
@9:46 - I would not recommend drywall anchors for a TV, especially one with an articulating mount that you’ll be pulling on to adjust. And definitely not a 60-70lb plasma. Just get a TV mount with more mounting holes, secure to studs.
I just mount two tv like a month ago, I don't know it's better or worst my walls are all brick and I don't know where the electrical wires are so I was very nervous
I actually have a question about something since I was just wondering myself and it's also something that I always seem to notice whenever people have their TVs mounted to the wall too. Usually, most TVs have inputs on either the back or the side of the TV, such as HDMI ports, USB ports, and a headphone jack port for headphones, and normally if anything is ever plugged in those ports, the cords and wires would be running down from the TV that way. However, I notice that when a lot of people have their TVs mounted to the wall, I usually don't see any wires or cords running down along the wall from the TVs. How exactly do people have devices plugged into the TVs without the cords running down like that? I was just curious myself since I just thought of asking.
A couple things. This video is four years old as of 2024. Modern, non-plasma flat screen TVs can be much lighter depending on the model. I bought a 65" OLED Samsung that only weighed about 36 lbs. Never *ever* put the mounting bolts into the back of the TV with an electric screwdriver or drill. There is no need. The threads are brand new and clean, and they only need to be hand snug. Also TV wall mounts are much cheaper now. You can find many sturdy ones for well under $40.
I subscribed because your method of instruction was so completely clear and easy to understand. I am alone and unfamiliar with some things provided on your channel, so looking for clarity. Thank u for that. I do have a question and realize you probably have little time to answer, but thought I would try. I want to be able to be in my bed which has a wall directly to the right. And I mean directly, my bed is up against it. that wall has a window and two typical 4-foot wall spaces on either side. I need to use one of those spaces to mount the tv. Is there a stud within that 4 ft space to use? and can you recommend a mount that would swing out and toward the bed viewing area? Vicki
Hi, great video, but in the video you used the top of the TV, when i mount my TV I want to use the bottom, basically I've bought the LG CX and the LG SN11RG soundbar, but the stand for the CX is lower than the top of the sound bar, therefore I have to wallmount, I want the bottom of the TV to be slightly higher than the top of the soundbar when the TV is wallmounted, which should also be an ideal height for me when viewing from my sofa. So what measurements should I take and use? I've not wallmounted such an expensive TV before (only a TV in my kids room) and I really don't want to get it wrong. Many thanks for your reply
Came here from your website! I read about ported vs closed vs combination subwoofers. Thanks for the video I learned a lot especially about the bit size in relation to the screw!
Tip as screens get ever larger. Never use dry wall inserts - always find a stud - even if that means cutting the board, inserting a cross member, then making good the section you cut out. You will thank me.
Looks like he covered the light switch and probably blocked the door. And if this is an office he should probably mount the TV for viewing while setting not standing. I've mount several TVs with drywall inserts but wouldn't do an articulating mount that way as there is more leverage when pulling the TV away from the wall. Mount a board to the wall spanning two or more studs depending on the size of the TV and to best distribute the weight. Try to keep the board from showing beyond the TV. I usually mount everything on the back of the TV including the part that goes on the wall to see it anything will block the cable attachments. A lot of mounts will alow adjustment up and down to avoid blocking the connections. You can also make a better measurement then from the TV top or bottom and the top holes on the wall part to know where to put the top holes to get the TV height you want. Mount like he did with one hole first. If the level in the mount is precision built in it should be as accurate as using another one. Debris between any level and what you are leveling will through off the level although anything closer to the center of the level will through even a longer level off. Real long levels are harder to handle and have more length to get debris under and through off the level. A lot of times it is said that a longer level is more accurate, all depends on the surface you are leveling. Use a level with a magnetic side on it or it will fall off as you only have two hands. Mounting to drywall only isn't good over the long run as it dries out over a long enough time and gets weaker if it gets wet. Fire fighters don't like things falling off walls.
9:28 you forgot to vacuum after you drilled , you can see all the wall mess out the drill holes when all 4 bolts are installed, apart from that a good video well done
Man this video is for all the guys who finally made it in life, but didn’t have a dad around to teach shit. Thank you brother
That describes you?
There’s literally dozens of us!
My dad was/is more of a tech person than a DIY person so I learned that instead.
@@ervinlosha1333You think that’s bad?
Relatable AF
Hi, recently a good friend of mine gave me a 70-in TV for free, he told me that the only thing I have to do is just buy a TV mount because he was keeping the one he already had mounted on his apartment wall for his new TV he already bought. This TV didn't have the four legs to put it on a table either, so I bought the right TV mount but I needed to know how to install it, I saw a few videos on TH-cam and when I watch yours I was convinced that you were exceptionally clear on what you were saying with perfect English and made it very easy for me to understand, then I followed the steps and I have my I should say free beautiful TV mounted on one of my bedroom' wall, I like to thanks thank you for such good explanation on this video and I really appreciate it, thanks again, Jorge from Havana Cuba 🇨🇺 bye-bye 👍
Been coming back to this very same video for the last couple of years when I need to wall mount a new TV. Thank you for your on going help with a video that is a few years old!!!
Happy it was helpful for you multiple times!
For those of you that dont have a stud finder: Find an electrical outlet there will be a stud either right next to it on the left or right next to it on the right (the hard part is knowing which exact side the stud is on) then measure 16 inches away from it that will be the center of the next stud. If you dont have a nearby electrical outlet, find a magnet and slide it on the wall it will stick when it is on a stud.
❤
This was one of the best tutorials on the internet. Clear, concise, makes me feel confident! Thank you!
I agree!!
For the studs make sure to scan both sides of the stud you find and measure the center for a secure hold :)
@Parker Jesus It's a scam and a virus dude
what do you mean by that
@@glossybyjae9393 most stud finders detect the edges of studs. So, you mark the 2 edges of a stud you find, but measure and mark your actual hole in the middle between those 2 marked points for a secure square spot to drill in. Do this for each stud.
What stud finder did you used?
That depends on the stud finder. Mine measures the center of the stud and has a screen that shows which part of the stud it’s detecting.
I absolutely hate directions and I usually get someone else to do anything that has lots of parts and directions but you made it simple, thanks bud.
Please do not use drywall anchors! Always screw into stud.
What if studs are not where you need them?
@@denisemartin3603 then don't put it there.
@@john.t645 well that's where my TV needs to go, but I figured it out
@@denisemartin3603 what did you end up doing?
@@BigDaddyTony24 id also like to know😂
I wouldn't recommend using drywall anchors to mount a TV that size. Studs are typically 16" apart. If you can't mount the frame to studs then perhaps you should anchor a couple of 2"X2" wooden boards to the studs then mount the frame onto those boards.
Thank you, as a lady DIY-er I'm nervous attempting this, I've been putting it off for months. But your tutorial is one of the best I've come across and I'm way more confident in doing this myself now. I just ordered my mount and leveler (I have the other tools necessary). Here's hoping for the best 🤞🏾
How did it go?
@@Sarah-m17 Hello! Getting back to you on this. Long story short, I did it today!! I took a couple weeks to get the tools and waited for a day I was stress free to get it done. A few things: I ordered a much cheaper mount, also from Amazon basics, that holds 132lbs for only $49 bucks (surprisingly). My T.V weighs less but I wanted a strong mount to idiot proof myself. My mount is slightly different than his, but watching this video gave me the confidence to read the manual lol. Honestly, it's not that bad at all, the manual directions were easy to read with clear images. I only got confused at one part but figured it out after a bit. I was most nervous about the drilling. I would not suggest using a high-power drill to put the brackets on your TV like the video. You can screw the bracket on by hand with a normal Phillip's screwdriver. The drill into your TV is not necessary at all, it's overkill and you may damage it if the drill is too powerful. But you definitely need the drill for the wall. Luckily I was able to use my stud finder and got the positioning right. You'll need help to lift the TV to the mount. Other than that this was a pretty easy small project. It sounded way more intimidating than it turned out to be and I saved almost $200! If you haven't already, don't pay to have someone screw and drill a few holes, most people can do this on their own. I'm glad I watched this video, it was helpful as a demonstration. Ok this was still a long story haha, take care!
@@lindalnd90e xe
Thanks so much! I'm mounting a 65" and thanks to your instructions it is not nearly as intimidating as I thought - 🙂
Thanks a bunch! Just installed this exact mount in our bedroom. Your guide was a lot more helpful than the paperwork given by Amazon :)
Thank you. This will help my non-handy husband who seems to want to be bob the builder. Hoping this install goes well!
Thank you! I was a bit nervous installing a TV mount for the first time at our new construction house, but your tutorial gave me the confidence.
Figuring out the height or where to put the tv is very important. I installed living room TV way too low using the eye level recommendation. I'm about to move it up about 10-12 inches so that the tv center is center from ceiling to floor
You’re a wall saver! I appreciate this as a visual learner!!!!
I’m not savvy but I think I can do this. If so, you saved me a $200 install. Thank you!
Excellent Tutorial. I love it when folks makes things simple
Make sure you screw into studs. Do not use drywall anchors only. My neighbor did, and the tv fell off after a few months, pulled off drywall, destroyed the tv.
Your neighbor is mildly retarded😆🤤🔩🖥
@@jfrog1979 She actually paid a friend to hang the tv. And the guy is an engineer. Come on, man!
HaHA!
I recently bought the Mounting Dream Soundbar mount and found it to be quite good and inexpensive. Next time I need a TV mount, I'll look to them for it. I could have saved a ton of money.
If you want it centered, secure a 1x3 to the studs then secure the mount to the 1x3 anywhere you want.
What is a 1x3? Is it a nail or wood
@@LadyDimePiece4Eva Lumber. A wood strip.
@@Firerose101 thank you! Do u place it on the wall
@@LadyDimePiece4Eva What FireRose meant is when you find the two stud, which are vertical and spaced equally or according to the code, and will be like | | that
You can buy 1x3 or other size lumber and secure that lumber to the stud making a H, |---| and you can mount the bracket to the lumber in the centered. This way, you can have the lumber secured to the studs and center the mount from the wall or space you want on the stuff and the TV will block the offset behind it.
Best comment on the video
Thanks for the easy to follow step by step instructions. I was stuck on that first unboxing part for what seemed like hours !!! But seriously this was very helpful . Thank You
Hey buddy great video ! But bits and hardware for what kind of studs ?? Metal wood ? Can you do a follow up video and explain?
Any tips for installing on a wall with only one stud?!
Thanks for this video- very helpful!
Your mounting bracket will need three vertical holes in it, adequately spaced, in order to attach it to a single stud. It works fine.
you are absolutely the best at explaining .The other men were horrible and had too man tools. No butter knife or hammer. I still hate the stud finder. I grew up with real walls but alas I find myself needing one.What also is nice about you is you use naked screws . those other buffoons wanted me to use weird screw stuff. . Thank you for not being a TV Mount Weirdo.
Such clear instructions compared to some I have seen , thank you very much 😊
Im moving in to my first apartment next week and im planning on doing this, thanks for the video and tips 👍
Me too!
After seeing the TV hanging past the door frame, I cut to the chase and bolted mine to the door itself. Seemed very high as well. Perhaps they like sore necks over the pond?
Very straight forward step by step instructions. Thanks!
Some tips:
Get a small drill bit, less than 1/16”, and drill a series of holes across the stud width to make sure you hit the centre of the stud.
Lag screws don’t work in steel studs.
If you need to use anchors, you MUST use SnapToggles.
You will be extremely unlucky if you hit a water line or wire inside the wall but it could happen. There isn’t a sensor made that accurately tells you they’re there. The only thing you can do is drill slowly and remove the bit often. Put a screwdriver in the hole and, if it comes to a dead stop, chances are you’re still drilling wood. If it feels suspect, abandon the location. Wrap some tape around your bit to tell you your hole depth. No sense drilling deeper than necessary.
If your screws or bolts come with a hex head, use a socket.
Yeah man this video skimmed over the most important part. The part that makes it nervous for DIYers. Dem stud finders are not fool proof. He didn’t say anything about marking the sides of the studs so he could screw into the center. Can’t just start drilling where the finder signals.
That's one of the best ones I've seen cuz that's the type of wall mount
Great instructions. You speak slow enough with great clarification for anyone to follow. Thanks!
So I have a question
In my country most walls are made of concrete, and when I moved to Canada I noticed that most of the walls here are not made of concrete (not sure if it’s ply wood or what is it), so my question is: should I drill the wholes exactly where the studs are located, or should I try to avoid drilling where the studs are located?
Might be a silly questions but it’s something new to me
Thanks in advance!
The walls could be plywood, sometimes MDF, and a lot of time 'fibro'. In any case, you should always drill into the stud - its the only way to ensure the weight of the TV will be sufficiently supported.
I recently ran into an issue of the studs not lining up with where I wanted the TV and the holes on the bracket. My solution which seems rock solid was to get most of the weight supported via the stud, then use a number of drywall anchors for the rest of the bracket for added security.
This might not work in your case, but I hope it shows some work arounds that are viable! 🙂
@@JT-Lucky-80 awesome, thanks!
This be the best I have ever watched..explains are very clear everyone an do it
Thanks buddy, I just needed a friend to tell me how to put my TV on the wall and there you are
Man this guy is so clear so easy to understand
Thanks for the tip about drill sizing compared to bold sizing, that was quite useful :-)
Bolts have major and minor diameters. (Major - Minor) = length of thread.
If you drill a hole equal to major diameter, the entire bolt will fit inside the hole and you don't want that. Hence, drill a hole slightly larger or equal to minor diameter, which will result in atleast 75% engagement of threads into the stud. Since the minor diameter information is readily available on internet for any screw/bolt, no approximations are required. Hope this helps :)
Thank you! we will be mounting my daughter's tv soon you helped me a lot
This tutorials was very simple. Thank you
UK & late to the party; if you're studs don't fall so you may place the TV centrally on the wall, you can always mount 2× horizontal battens eg 2×4" to the studs (as long as they are less than the TV width, & attatch bracket to that.Used to fitting on solid walls but definitely a good trouble-shoot, guys.
Great tutorial BTW. All best wishes 😊
This is extremely helpful. Thank you.
Awesome video, great step by step, well-organized, and lots of good tips. Thank you, kindly!
Do you have video on how to wire the TV connections behind the wall?
was a little worried about doing this but this video was super easy to follow ! thanks !!
4:41 Thats what she said😔
7:51 - that’s what he said
☹
Terrific video, your instructions are clearly stated and photographed and I am ready to tackle this project....thanks to you;)
6:22 I learned that a long time ago on a previous TH-cam video. Good rule of thumb 👍🏽 👍🏽
I think tv installer videos should specified if the studs are wood or metal since depending on the material is the kind of anchor you would use , and some people That has no knowledge of that can get confuse and use the wrong anchors
how do you know what setting to put the "limiter" on?
You start on the lowest number then check for snugness. If it has any play or movement, set to the next number up; you only need it to be secure not overly tight.
Easy to follow and very helpful! Also very handsome 😅 thanks for the video !😇
I wouldn't bother using a drill to tighten screws. It barely takes much longer to use a handheld screwdriver and then you can feel when the screw is tight enough.
Wood fractures when screwed into undrilled which can lead to loosening and eventually could cause the bolts to wiggle out
Jonah Matthes, thank you so much for this tutorial! Very very helpful!!!!!!
You are so good and detailed on how to hang this dang thing! I appreciate your video so much, Thank you ☺️
Thanks for the video; quite explained; seems easy to do; have a good one
Thanks, very helpful. Having a DIY weekend 🥰
Nice instructional video. If I would ever attempt this, I would probably have a wall that looks like swiss cheese. :)
Currently 😭😭😭
Excellent video I need to install a 70” LCD TV it’s around 50 lbs. will attached to the studs.
Why do you not recommend the tv wall mount?
Thank you for explaining this project in such a clear way. Your step by step tutorial has motivated me to do this in my bedroom. I will use your video as a guide to make sure I mount my TV properly. Thanks again
I am scared to do this on my own, but this gives me hope. I dont trust my cheap stud finder and don't want to bring my drywall down. lol
Lol, how’d it go? I’m trying on my own
As well
@@DannyWifi I bought a better stud finder at Costco and now I’m offering to put up all my friends mounts. Easy peasy.
i used a powerful magnet to find the studs....
I do installation for $45
Thank you for showing us how to mount TV on the wall
If your trying to center it on the wall and don’t have studs that line up to do it you can install some horizontal lumber between the studs you have and anchor to that. The hole you make for the lumber can be patched and the repair will be hidden behind the mounting plate and the tv.
Great job on this video!
Thanks for the tutorial, but why do you attach your tv that high? It's an American thing to do I think.
That little drill went through the stud?
it’s crazy how simple this is. all you really need to worry about is finding the stud and making sure your screws are tight. 🙏🏾
what year is the tv I enjoy the vlog
Thanks for the best tutorial daddy
@9:46 - I would not recommend drywall anchors for a TV, especially one with an articulating mount that you’ll be pulling on to adjust. And definitely not a 60-70lb plasma.
Just get a TV mount with more mounting holes, secure to studs.
Thank you, handsome! Very useful tutorial!
I just mount two tv like a month ago, I don't know it's better or worst my walls are all brick and I don't know where the electrical wires are so I was very nervous
I actually have a question about something since I was just wondering myself and it's also something that I always seem to notice whenever people have their TVs mounted to the wall too. Usually, most TVs have inputs on either the back or the side of the TV, such as HDMI ports, USB ports, and a headphone jack port for headphones, and normally if anything is ever plugged in those ports, the cords and wires would be running down from the TV that way. However, I notice that when a lot of people have their TVs mounted to the wall, I usually don't see any wires or cords running down along the wall from the TVs. How exactly do people have devices plugged into the TVs without the cords running down like that? I was just curious myself since I just thought of asking.
When not able to reach a STUD, have you ever used Toggle Bolts (Butterfly Bolts?). Would this provide the strength necessary for a 55+ TV?
A couple things.
This video is four years old as of 2024. Modern, non-plasma flat screen TVs can be much lighter depending on the model. I bought a 65" OLED Samsung that only weighed about 36 lbs.
Never *ever* put the mounting bolts into the back of the TV with an electric screwdriver or drill. There is no need. The threads are brand new and clean, and they only need to be hand snug.
Also TV wall mounts are much cheaper now. You can find many sturdy ones for well under $40.
I subscribed because your method of instruction was so completely clear and easy to understand. I am alone and unfamiliar with some things provided on your channel, so looking for clarity. Thank u for that. I do have a question and realize you probably have little time to answer, but thought I would try. I want to be able to be in my bed which has a wall directly to the right. And I mean directly, my bed is up against it. that wall has a window and two typical 4-foot wall spaces on either side. I need to use one of those spaces to mount the tv. Is there a stud within that 4 ft space to use? and can you recommend a mount that would swing out and toward the bed viewing area? Vicki
Hi, great video, but in the video you used the top of the TV, when i mount my TV I want to use the bottom, basically I've bought the LG CX and the LG SN11RG soundbar, but the stand for the CX is lower than the top of the sound bar, therefore I have to wallmount, I want the bottom of the TV to be slightly higher than the top of the soundbar when the TV is wallmounted, which should also be an ideal height for me when viewing from my sofa. So what measurements should I take and use? I've not wallmounted such an expensive TV before (only a TV in my kids room) and I really don't want to get it wrong. Many thanks for your reply
Best description so far very detailed and clear instructions
Curious to know on your description why did u right not recommended on this mount ?
good demo, thanks, i did one a long time ago and needed a refresher
I like your stud finder,mine is hit and miss. Would you mind tell me what brand name of stud finder you are using?Thanks.
Do you drill into the stud?
Always!
Came here from your website! I read about ported vs closed vs combination subwoofers. Thanks for the video I learned a lot especially about the bit size in relation to the screw!
No problem! Happy I could help out!
This was pretty good!!
Any stud finder recommendations?
Tip as screens get ever larger.
Never use dry wall inserts - always find a stud - even if that means cutting the board, inserting a cross member, then making good the section you cut out.
You will thank me.
Looks like he covered the light switch and probably blocked the door. And if this is an office he should probably mount the TV for viewing while setting not standing. I've mount several TVs with drywall inserts but wouldn't do an articulating mount that way as there is more leverage when pulling the TV away from the wall. Mount a board to the wall spanning two or more studs depending on the size of the TV and to best distribute the weight. Try to keep the board from showing beyond the TV. I usually mount everything on the back of the TV including the part that goes on the wall to see it anything will block the cable attachments. A lot of mounts will alow adjustment up and down to avoid blocking the connections. You can also make a better measurement then from the TV top or bottom and the top holes on the wall part to know where to put the top holes to get the TV height you want. Mount like he did with one hole first. If the level in the mount is precision built in it should be as accurate as using another one. Debris between any level and what you are leveling will through off the level although anything closer to the center of the level will through even a longer level off. Real long levels are harder to handle and have more length to get debris under and through off the level. A lot of times it is said that a longer level is more accurate, all depends on the surface you are leveling. Use a level with a magnetic side on it or it will fall off as you only have two hands. Mounting to drywall only isn't good over the long run as it dries out over a long enough time and gets weaker if it gets wet. Fire fighters don't like things falling off walls.
Man shut up
Great Video. Very helpful thank you.
Absolutely well done! Thank you!
9:28 you forgot to vacuum after you drilled , you can see all the wall mess out the drill holes when all 4 bolts are installed, apart from that a good video well done
Does the drill bit screw all the way to the stud?
This is the best video on TH-cam so far.Thank you so much.
do you NEED the stud finder to install a tv mount or is it just preferred?
If you don’t have studs then it will be in dry wall and that’s not stable. You will need toggle bolts.
Does that TV mount work for all TV sizes or is it made specifically for your TV's size?
This is a no bullshit tutorial. If you can say your abc's you can follow this.
Can I find a stud in a brick wall? What is the importance of finding the wall stud?
Wall stud is a 2x4 where you can drill into sturdier than jjst drilling it into drywall
In a brick wall yu don't need to find a stud do it wherever u want
Do you need a drill bit? I don't have any and was planning to just drill the screw into the wall without making a hole first
If I use drywall anchors, does the mount still have to go into a stud? The TV I want to hang is maybe 30 to 50 lbs
thanks for the helpful tips and this video
So you don't need to use the drywall inserts?
Love Your Vid My Guy!! Nice Work!! 💯 ❤️!!!!