PLEASE READ BEFORE COMMENTING: I have no financial interest in Rob Cosman's website or tools. As I said, you can use any tools, and dismissing this video simply because you don't like the tools I use will cause you to miss some excellent dovetailing tips. Rob's tool are priced higher than some would like because many are made or modified by hand, and because he uses a great deal of the proceeds to support charitable causes. Rob has made videos showing how to use and modify your own tools. So please refrain from slandering him or me just because you think his saw is expensive
I've been using Rob's method for some time, but the only tool I use that's the same is the fret saw and marking guage. I use Japanese pull saws with magnetic dovetail guides, Narex chisels, and a shoulder plane. As you said, the important technique is the offset and marking. Great video!
I’m part of the Rob’s Bench Brigade - we build benches for the veterans that attend Rob’s classes - Rob is a great guy and teacher. Love all your videos - keep up the great work!
My comment is to say I admire the respect you show to other woodworkers it is very commendable. It is something all of you finer video makers share and kudos for sharing the wounded heart project
Stumpy You do a great job with your videos. Everything is clear as can be and well presented. As is your enthusiasm. And to anyone who questions Cosman tools and approach, let me tell you this.I'm a moderately skilled woodworker with about 10 years of experience and I could not cut a dovetail to save my life. Then I invested in RC's equipment and instruction. On my second attempt, I cut nearly perfect through dovetails in red oak. No gaps at all. With good equipment and good instruction, this joint turned from a mythical creation available only to highly skilled super Craftsmen to an entirely achievable joint that even a hack like me can turn out. Keep on doing what you're doing, sir.
I had the opportunity to act as Rob's assistant at a few classes that he held at the Woodcraft store at which I worked. My head almost wasn't big enough to contain all that I learned. Thanks for the refresher!
This is the best dovetail tutorial I’ve ever watched. I’ve been watching dovetail videos for about 6 months now. This has the most useful ideas condensed into one video. Aside from some unusual creative tips that help occasionally, this is the one stop video to get started and get good with minimal wasted wood and time.
Great video James. I have watched several of Rob Cosman’s videos and decided to purchase one of his fret saws. Several days after I ordered the saw I receive a phone call from Rob informing me he shipped my saw. We talked for a little bit and he is as nice as he appears on his videos. I am a veteran and I told him I appreciate what he does for veterans. I did meet you James at the Atlanta woodworking show and you were just as nice as you are on your videos. Thank you.
I was an incredibly lucky winner of a tool giveaway that Rob Cosman does regularly. I was trying to figure out dovetails at the time and getting no where fast. Once I received a dovetail saw, marking gauge, and marking knife (won them all in a dovetail package) I tried again. I think he said you'd have it by the 2nd or 3rd one. He wasn't kidding. Perfect dovetails from hacking at it with previous methods. BTW, if I'm not mistaken Robs purple heart charity gives free woodworking seminars to the wounded vets. I think they're about 5 days long. LIke you said, extremely generous. As usual, great video James!
Wow. I've watched at least 500 vids on dovetailing. And, my dad was a traditional cabinet-maker. This got my attention. You're very generous in both your knowledge and sharing others. Need more folks like you. Rob, I'm coming after your vids and tools right now.
watched about ten of your videos now. they're not good. they are by far the best most informative and pedagogical, well structured and produced on the subject. i'm laying in bed with a broken arm now but i'm sure when back to my shop my carpentry will improve thanks to you a hundred folds. THANKS and keep up the good work!!!
Hi, I think it’s fantastic that you took the time to make this video about Rob Cosman - his method and tools. I employ as many of his methods as my skills with allow and I own many of his tools. They are expensive especially when shipping to Ireland. His teachings and tools are the best money can buy. My hand made dovetail before were good but now I proudly show them off.
Great information Jame’s , it’s great to see the woodworking community support one another, what @RobCosman does for Veterans is very admirable, as a disabled vet myself (not combat wounded) I appreciate the acknowledgment from Rob and others in the woodworking community’s support for our brothers and sisters who served our respective nations. Thanks you for bringing our veterans to the forefront and all that you do on your channel. God bless.
Yep, I discovered this technique about a month ago, when a Rob Cosman video popped up on my recommended viewing list. Brilliant for beginners and old hands alike!
I've been binge-watching your channel and I consider it like at least a technical degree in carpentry thanks for the knowledge I'm not done watching probably will see them twice. thank you and your crew for teaching me carpentry. wish you guys all the success in the world in all your ventures
Very nice explanation of (and tribute to) Rob Cosman's method~! I discovered his channel a few years ago and wished that I'd known about him much sooner. The man is the Yoda of Dovetails~! I have a few of his tools and love using them. Also his sharpening method has completely changed the amount of effort I put into getting great edges on my tools~! Again, wished that I'd discovered him earlier on. Thanks James for all the great content you produce~!
Good summary on Rob’s technique on dovetail cutting. I started to try cutting dovetails and have been watching Rob channel. Your video clears some of the areas that I missed. Thank you for sharing.
There is most certainly an eloquence to the way you speak and demonstrate your craft. Absolutely I admire your work. You remind me much of another you-tuber Essential Craftsmen, in your delivery of information.
I've watched Rob's videos on this stuff, but I enjoy it being explained by someone else who has a lot more knowledge of woodworking than I do. It's just nice to see what you came out with, and what I should focus on. Thanks!
Thanks for this video James. I wasn't aware of Rob Cosmans method until I saw it here. I have to say that it's made a huge difference to the outcome of my projects.
I'm so impressed. My respect for you just jumped a big notch. By bringing great content to your chanel, even from other channels, you make yours better for me. By crediting Rob, your earn my respect. By speaking the virtues of what Rob is doing, I respect you so much more. Thank you. Btw, I watch you both, every video. You added new things for me, that I didn't get/notice on Rob's videos.
Hi James few years ago I got Rob cosman phone number off of the back of one of his videos. We talked for about 45min was a pretty interesting conversation didn't know him and his wife have ten kids wow. I bought directly from him one of his dovetail saws and glad I did because it has become my favorite for cutting dovetails. But for starting the kerf I use a kerf starter from Glen Drake tools which actually may help you to cut vertical. Also after cutting out bulk of the waste before any chiseling I cut the marking gauge line in deeper with a sharp utility knife. Then I will use the chisel horizontal to make a small rabbet before actually chiseling.
I want to thank you for your, videos and professional demeanor. You have grown over the years. Your responses are spot on to the soothsayers. Sometimes I think of my Grandfathers beliefs, “if we can’t say something nice about someone then don’t say anything at all”. You and Rob are my go to videos. Thank you.
Super video, James. You and Rob Cosman are. by far, my favorite woodworkers. It's cool to see you discussing and recommending Rob's techniques. Now, if only one of you would have the other as a guest...
Excellent video! I’m a vet that was lucky enough to take Rob’s course. By the end of the first day I was cutting dovetails. The course was very well taught and a lot of fun. On the course are 6 veterans and 6 civilians.
James thanks for the video. I've watched Rob's videos on cutting dovetails. I never quite got it. Watching this, I think everything becomes much more clearer... I support Rob online and have some of his tools. I think I may just get the DT saw. Thanks for a great tutorial; and thanks for spreading Rob's work and support of vets. I'm a DAV myself and appreciate the support we get from folks like you and Rob.
Due to Stumpy's recommendation of Cosman I subscribed to his channel. BEHOLD! he made a controversial post about sharpening, all the while misquoting the the actual comment involved, then then CharlieSierra had the balls to disable comments on it. Unsubing a dingbat is to innocuous an activity.
@coldrunner Quote which part is obscure and I will clarify. A problem w/ replies is that yt does not highlight exactly which irem you are referring to.
Great video James, accurate descriptions of Robs tools and techniques. Rob has packaged his dovetailing tools into kits that gives you everything you need to get started, or you can purchase them individually. I own most all of these and they work great and are top quality. They also work for other traditional methods.
Ive recently began woodworking in an effort to overcome anxiety issues that Ive dealt with most of my life. Its sometimes so prominent that it triggers depression and what I would describe as nerve and joint type growing pains all over my body. These extreme times cause many days and weeks of limited sleep that only magnifies the problems I am dealing with. Ive found that working in the shop gives me something positive to focus on and even channels my OCD into a positive result. Im certainly no expert, but have been enjoying the process of adding to my knowledge and skill level.
I’ve watched this video a dozen times. I love your whole channel. I’ve been afraid to try dovetails, but I’m now making a plan to give it a go and follow your video step by step. Thank you so much for this and all you do.
James, this is one of the times I regret that TH-cam only grants one thumbs up! Great video, great effort and lots of respect for you and for Rob Cosman. Greeting from The Netherlands.
I have only tried my hand at dovetails once, and it was not pretty but it worked. LOL. After watching this video (and following up with Rob's video), I will try my hand again at them! I won't be buying Rob's saw, but I will go buy a wheel marking gauge and a better saw for dovetails than what I currently have (Canadian Tire $10 backsaw). Thank you for making this video!!! I love your channel and check things out here regularly!
Such a clear and well presented video and a very generous recognition of Rob Cosman's work. I wish I lived in the US - our tools are so expensive over here in the UK: a Dewalt 745 worksite saw is $675 (equivalent) in the UK!!!!
I am a long time fan of both you and Rob's. I like his videos of dovetailing. You did a great job though of condensing and explaining parts of his methods. Both of you keep it up.
I'm currently learning carpentry and the dovetail joint was the most difficult endeavour I had faced. This video has blown my mind and will definitely help me in the future. Thank you.
Well done James, and thanks for giving the shout outs to Rob Cosman's other videos rather than repeating too much. Nice concise video with just the right amount of detail and references. I love what Rob Cosman is doing with his channel and the Purple Heart Foundation, and I've been following his channel for some time now. He's doing some great work (you too BTW).
James, another great video. Beyond being a dovetail genius, Rob is q great guy that I know and consider a friend. His PHP has helped numerous combat wounded vets and is supported only by Rob and outside donations. Our East TN Luthiers Guild built a guitar that we are currently doing a silent auction on, with all proceeds going to the PHP.
Thank you! Saving this for a rewatch and will follow the links to learn more from the master himself. I’m below new when it comes to hand-tool woodworking if there is such a thing…but love the idea of a sawdust-free garage…so this is a great video to see!
Roy Underhill was a real in-fighter in the wood shop... man kept broken bottles around and would use em at the drop of a spoke-shave. Concaving the concealed portions of the cuts also produces a volume that wood glue will fill creating a much stronger glue bond.
I love Rob Cosman he is IMO the best out there and his teaching style draws me in. I must say, I have been having a hard time with the dovetails and truly understanding his method even though when I would watch him do it I would feel as if I did understand, once I got to the the shop and started I found myself still struggling to figure it out. Until I watched this video. The way you broke down why he did things the benefits of each of Rob's tips and tricks finally made me actually understand and was able to cut my first well fitting Dovetail after about 20 attempts in the past! Thank you and well done video it has taught me a lot.
great video and yea, the WOW factor took my breath away at the prices on Rob's page but, I understand too, quality is not cheap and in the long run, is worth the investment. Now....what I enjoyed the most...was the plug at the end for veterans and wounded veterans. Classy that is off the charts!!! You did not have to include that....that you did, is worthy of a salute! I'll give you TWO!!
Great ideas on cutting the inside rabbet and on the offset marking with the marking gauge! Regarding the cutting angles for the tails, I've trimmed that down to one - straight up by moving the board so that the angled lines orient vertically - as it's alot easier cutting up and down. Also ala Chris Becksvoort - I also lightly tap the scribe line on the outside of the pin waste with a chisel and cut a small shoulder to keep that line crisp and horizontal.
Jonathan Katz-Moses has some great tips too and a wonderful guide tool. You had some great tips here Stumpy! Thanks for sharing your knowledge with us.
Best video I’ve seen for ages, so practical and new tips. Fine tuning a technique that I still find difficult so I’ve got some new ideas to help me. Thanks very much, and also for the link to a new innovator too.
I watch Rob frequently, also Paul Sellers. After cutting hundreds of dovetails tails first I viewed Frank Klausz doing pins first. Give it a try, it really simplifys the process.
You bring me back to watching New Yankee Workshop with my Dad! Great explanation! I haven't done any dovetails myself yet but hope I can remember your video when I do!
James, great summary! I've interacted with Rob in person more than once. Everything you stated is true. His tools really do help, but more importantly the techniques make the biggest difference. He is also truly passionate about vets, including his family. I had the opportunity to watch him teach blind dovetails in person, with lots of explanation at each point. He still finished a show-piece quality blind dovetail joinery in 8-10 minutes. I also watched a person clone his method and use a very thin plane shaving as a shim for an extra tight joint. His very first dovetails looked amazing. There is one thing I didn't hear mentioned that really should have been. Rob can sharpen a tool so that it performs like a razor. Yes, his techniques really work. I did several things opposite to see if I could find a better way. Patiently, Rob was always right. I get nothing for saying this. He's a genuinely good person with serious skill. Put an IBC blade in your existing planes. Pick up an IBC chisel too. Learn how Rob sharpens and you'll reach for hand tools before power tools.
I wanted to learn dovetails. watched rob's videos. Bought that marking knife, really nice, and a Katz Moses dovetail guide. Didn't take long to start getting nice looking joints. Not perfect but an excellent start without out tearing my hair out
Glad you mention time and practice. To get going I make some random boxes and used dovetails in projects that don't really need them. Doing each operation accurately gives me excellent results. Having Bad Axe an hour away from me hurt my wallet pretty bad but I feel they're that good. I bought them to reward myself for making decent dovetails.
Excellent ideas in this video especially on transferring your saw cut and offsetting your cut! I have often wondered why some woodworkers do not dove tail the back of the drawer? They just do the front to the sides but no back to the sides.
I believe it is mostly due to the fact that the front needs the support for pulling the drawer out. The back simply follows the pull of the drawer. Not sure if that is clear enough?
Excellent video. One big mistake I see is folks using a coping saw and thinking it is a fret saw. Once you use a fret saw you will see what a difference it makes. Good work on bringing this to some folks who have never heard of Rob Cosman. My plan for my first week of retirement is to go take his class. Yes his tools are expensive but they fit in the life time investment category and can be past down for generations. They are extremely well built with high quality components.
I, a complete novice, followed Paul Seller's advice to file a "progressive rake" in the first two inches of teeth. Simple to do and it works great. Likewise he recommends taming the set a bit and shows how to do that. But that offset bit is new to me and very cool.
Rob Cosman and Frank Klausz are the two best dovetailers I have ever seen, hands down. That's not a knock on Sellers. He's far better than most. But Cosman and Klausz are savants.
Paul Sellers’ videos on preparing a new saw and sharpening with progressive rake are excellent. m oc is referring to his saw sharpening skills, rather than his dovetailing. A dovetail saw prepared the way he shows would work really well for the methods shown here, without spending a lot of money on a saw.
It's a great technique that Glen Drake introduced using a feeler gauge to offset the thickness of the blade. I actually like using the marking gauge like Rob does.
I’m new to wood working and watch a lot of your videos love the content , being a dis able vet with ptsd and tbi my memory sucks so I have to rewatch your vids to learn things , I don’t have many hand tools or funds to buy new hand planes on my wish list is an old jointer plane no 7 I think it is and a good scrub plane , love you hand tool wall it’s my dream to have a few of them old beautiful things Keep up the good work and I appreciate you informative videos
@Robert faith Rob Cosman works with Vets just like you in the same situation. I strongly suggest you go to his site. They try to help as much as possible, including helping you off with some start off tools. It's not guaranteed but you have great chance based on ur short story. I believe it is like an application so you have to be willing to share ur story. Good luck and thanks for your service
According to Rob’s application form on his web-site, there is no requirement to be a recipient of either Purple Heart or Sacrifice Medal. They like to know if you are but it is not required to apply.
pakster 99 wife just reminded me that they are up north I’m in Texas so with my ptsd the flying is out for me , also there is folks that are way worse off then me , I just keep plugging along and keep trying to get better and let those that are more worthy to go
I have been scared to death of doing hand carved dovetails. This video really made me feel alot better about trying it. Needless to say it will be seen if I can actually do it lol. Thanks for the video and info.
Thanks for sharing, as a Vet I find wood working quite therapeutic (until it all goes wrong and looks like a 2 year old cut the joint). I'll definitely be looking at his video and likely the tools as well, if I can squeeze them into a pretty darned tight budget.
What is the first practical item a wood crafter should make for his workshop? Thank you for your hard work you put into your content .from across the pond ..God bless you and your family..Lee
Another excellent tutorial. I've been enjoying your videos for a decade. I wanted to ask you about the rabbet on the tails board. Wouldn't that do these two things: 1) shorten the width of the drawer or box and 2) make the pins proud of the tail board? The amount of shortening would be tiny, just 2x the rabbet depth, so probably insignificant. But making proud pins means you have to use some kind of notched caul to set the joint, and then plane away the pins' end grain once you assemble the joint. Care to enlighten us on that? Many thanks!
This is common sense and brilliant. I had considered making a metal jig to make dovetails fast, easy, and accurate. However this is so fast, easy, and accurate I won't need a jig.
![ลองสุ่มไอโฟน 990 โกงมั้ย? [ โกงมั้ยครับ ep.101 ] | DOM](http://i.ytimg.com/vi/bfsWe0j492k/mqdefault.jpg)
PLEASE READ BEFORE COMMENTING: I have no financial interest in Rob Cosman's website or tools. As I said, you can use any tools, and dismissing this video simply because you don't like the tools I use will cause you to miss some excellent dovetailing tips. Rob's tool are priced higher than some would like because many are made or modified by hand, and because he uses a great deal of the proceeds to support charitable causes. Rob has made videos showing how to use and modify your own tools. So please refrain from slandering him or me just because you think his saw is expensive
Keep on doing what you do, very much enjoy everything you share.
You say it like it truly is; a rare quality today. Thanks for the introduction to Rob Cosman and the good that he does.
I've been using Rob's method for some time, but the only tool I use that's the same is the fret saw and marking guage. I use Japanese pull saws with magnetic dovetail guides, Narex chisels, and a shoulder plane. As you said, the important technique is the offset and marking. Great video!
I hope that isn't what you thought I was doing....
Stumpy Nubs “They are too pricey” is code for “I’m too broke to afford it.”
I’m part of the Rob’s Bench Brigade - we build benches for the veterans that attend Rob’s classes - Rob is a great guy and teacher. Love all your videos - keep up the great work!
My comment is to say I admire the respect you show to other woodworkers it is very commendable. It is something all of you finer video makers share and kudos for sharing the wounded heart project
True class supporting another craftsman
Stumpy
You do a great job with your videos. Everything is clear as can be and well presented.
As is your enthusiasm.
And to anyone who questions Cosman tools and approach, let me tell you this.I'm a moderately skilled woodworker with about 10 years of experience and I could not cut a dovetail to save my life. Then I invested in RC's equipment and instruction. On my second attempt, I cut nearly perfect through dovetails in red oak. No gaps at all. With good equipment and good instruction, this joint turned from a mythical creation available only to highly skilled super Craftsmen to an entirely achievable joint that even a hack like me can turn out.
Keep on doing what you're doing, sir.
I had the opportunity to act as Rob's assistant at a few classes that he held at the Woodcraft store at which I worked. My head almost wasn't big enough to contain all that I learned. Thanks for the refresher!
This is the best dovetail tutorial I’ve ever watched. I’ve been watching dovetail videos for about 6 months now. This has the most useful ideas condensed into one video. Aside from some unusual creative tips that help occasionally, this is the one stop video to get started and get good with minimal wasted wood and time.
Great video James. I have watched several of Rob Cosman’s videos and decided to purchase one of his fret saws. Several days after I ordered the saw I receive a phone call from Rob informing me he shipped my saw. We talked for a little bit and he is as nice as he appears on his videos. I am a veteran and I told him I appreciate what he does for veterans. I did meet you James at the Atlanta woodworking show and you were just as nice as you are on your videos. Thank you.
Thanks for serving
All of Robs offerings are fantastic. He’s a hell of guy and a visit to his site is worth it.
What a brilliant system. You gotta love someone who can see ways to improve on centuries-old tasks.
I was an incredibly lucky winner of a tool giveaway that Rob Cosman does regularly. I was trying to figure out dovetails at the time and getting no where fast. Once I received a dovetail saw, marking gauge, and marking knife (won them all in a dovetail package) I tried again. I think he said you'd have it by the 2nd or 3rd one. He wasn't kidding. Perfect dovetails from hacking at it with previous methods. BTW, if I'm not mistaken Robs purple heart charity gives free woodworking seminars to the wounded vets. I think they're about 5 days long. LIke you said, extremely generous. As usual, great video James!
The saw was a game changer for me. It is worth every penny.
Wow. I've watched at least 500 vids on dovetailing. And, my dad was a traditional cabinet-maker. This got my attention. You're very generous in both your knowledge and sharing others. Need more folks like you. Rob, I'm coming after your vids and tools right now.
watched about ten of your videos now. they're not good. they are by far the best most informative and pedagogical, well structured and produced on the subject. i'm laying in bed with a broken arm now but i'm sure when back to my shop my carpentry will improve thanks to you a hundred folds. THANKS and keep up the good work!!!
Hi, I think it’s fantastic that you took the time to make this video about Rob Cosman - his method and tools. I employ as many of his methods as my skills with allow and I own many of his tools. They are expensive especially when shipping to Ireland. His teachings and tools are the best money can buy. My hand made dovetail before were good but now I proudly show them off.
Great information Jame’s , it’s great to see the woodworking community support one another, what @RobCosman does for Veterans is very admirable, as a disabled vet myself (not combat wounded) I appreciate the acknowledgment from Rob and others in the woodworking community’s support for our brothers and sisters who served our respective nations. Thanks you for bringing our veterans to the forefront and all that you do on your channel. God bless.
Valuable info, thanks, James. And kudos to you for being unafraid to tout someone else's website.
Yep, I discovered this technique about a month ago, when a Rob Cosman video popped up on my recommended viewing list. Brilliant for beginners and old hands alike!
I've been binge-watching your channel and I consider it like at least a technical degree in carpentry thanks for the knowledge I'm not done watching probably will see them twice. thank you and your crew for teaching me carpentry. wish you guys all the success in the world in all your ventures
Very nice explanation of (and tribute to) Rob Cosman's method~! I discovered his channel a few years ago and wished that I'd known about him much sooner. The man is the Yoda of Dovetails~! I have a few of his tools and love using them. Also his sharpening method has completely changed the amount of effort I put into getting great edges on my tools~! Again, wished that I'd discovered him earlier on.
Thanks James for all the great content you produce~!
Big fan of Rob Cosman, especially what he's doing for our veterans. Very informative and well edited video. Subscribed!
Good summary on Rob’s technique on dovetail cutting. I started to try cutting dovetails and have been watching Rob channel. Your video clears some of the areas that I missed. Thank you for sharing.
There is most certainly an eloquence to the way you speak and demonstrate your craft. Absolutely I admire your work. You remind me much of another you-tuber Essential Craftsmen, in your delivery of information.
I've watched Rob's videos on this stuff, but I enjoy it being explained by someone else who has a lot more knowledge of woodworking than I do. It's just nice to see what you came out with, and what I should focus on.
Thanks!
Thanks for this video James. I wasn't aware of Rob Cosmans method until I saw it here. I have to say that it's made a huge difference to the outcome of my projects.
Watched one of Rob’s video. The one I saw was over an hour. Glad your tips are available. Go Buck!
I'm so impressed. My respect for you just jumped a big notch. By bringing great content to your chanel, even from other channels, you make yours better for me. By crediting Rob, your earn my respect. By speaking the virtues of what Rob is doing, I respect you so much more. Thank you.
Btw, I watch you both, every video.
You added new things for me, that I didn't get/notice on Rob's videos.
An excellent presentation and important shout-out to Rob Crosman!
I went to Cosman's seminar at the Hamilton Woodworking Show ... it was outstanding. He answered questions afterwards. A very nice fellow.
Hi James few years ago I got Rob cosman phone number off of the back of one of his videos. We talked for about 45min was a pretty interesting conversation didn't know him and his wife have ten kids wow. I bought directly from him one of his dovetail saws and glad I did because it has become my favorite for cutting dovetails. But for starting the kerf I use a kerf starter from Glen Drake tools which actually may help you to cut vertical. Also after cutting out bulk of the waste before any chiseling I cut the marking gauge line in deeper with a sharp utility knife. Then I will use the chisel horizontal to make a small rabbet before actually chiseling.
I want to thank you for your, videos and professional demeanor. You have grown over the years. Your responses are spot on to the soothsayers. Sometimes I think of my Grandfathers beliefs, “if we can’t say something nice about someone then don’t say anything at all”. You and Rob are my go to videos. Thank you.
What's a toothsayer?
Super video, James. You and Rob Cosman are. by far, my favorite woodworkers. It's cool to see you discussing and recommending Rob's techniques. Now, if only one of you would have the other as a guest...
Excellent video! I’m a vet that was lucky enough to take Rob’s course. By the end of the first day I was cutting dovetails. The course was very well taught and a lot of fun. On the course are 6 veterans and 6 civilians.
James thanks for the video. I've watched Rob's videos on cutting dovetails. I never quite got it. Watching this, I think everything becomes much more clearer... I support Rob online and have some of his tools. I think I may just get the DT saw. Thanks for a great tutorial; and thanks for spreading Rob's work and support of vets. I'm a DAV myself and appreciate the support we get from folks like you and Rob.
I'm a fan of Rob Cosman, Paul Seller, and Stumpy Nubs!
Due to Stumpy's recommendation of Cosman I subscribed to his channel. BEHOLD! he made a controversial post about sharpening, all the while misquoting the the actual comment involved, then then CharlieSierra had the balls to disable comments on it. Unsubing a dingbat is to innocuous an activity.
@coldrunner Quote which part is obscure and I will clarify. A problem w/ replies is that yt does not highlight exactly which irem you are referring to.
@coldrunner ?
@@brucewelty7684 Rob Cosman sucks!
Me too!
Again i say it, You are the best, greetings from the wood whistlers workshop in the philippines, teaching young men the passion of wood work.
Great video James, accurate descriptions of Robs tools and techniques. Rob has packaged his dovetailing tools into kits that gives you everything you need to get started, or you can purchase them individually. I own most all of these and they work great and are top quality. They also work for other traditional methods.
Ive recently began woodworking in an effort to overcome anxiety issues that Ive dealt with most of my life. Its sometimes so prominent that it triggers depression and what I would describe as nerve and joint type growing pains all over my body. These extreme times cause many days and weeks of limited sleep that only magnifies the problems I am dealing with. Ive found that working in the shop gives me something positive to focus on and even channels my OCD into a positive result. Im certainly no expert, but have been enjoying the process of adding to my knowledge and skill level.
I myself suffer from severe OCD caused anxiety. Woodworking, especially with hand tools is excellent therapy.
Well done. Nice to see great craftsmen supporting each other.
👍👏
I’ve watched this video a dozen times. I love your whole channel. I’ve been afraid to try dovetails, but I’m now making a plan to give it a go and follow your video step by step. Thank you so much for this and all you do.
James, this is one of the times I regret that TH-cam only grants one thumbs up! Great video, great effort and lots of respect for you and for Rob Cosman. Greeting from The Netherlands.
I have only tried my hand at dovetails once, and it was not pretty but it worked. LOL. After watching this video (and following up with Rob's video), I will try my hand again at them! I won't be buying Rob's saw, but I will go buy a wheel marking gauge and a better saw for dovetails than what I currently have (Canadian Tire $10 backsaw).
Thank you for making this video!!! I love your channel and check things out here regularly!
Rob is a class act, and I’d say the same about you. Great video and I’m sure Rob will be flattered ~
Thanks Stumpy. Rob is a great guy. Been in his online classes for a couple years now.
Such a clear and well presented video and a very generous recognition of Rob Cosman's work. I wish I lived in the US - our tools are so expensive over here in the UK: a Dewalt 745 worksite saw is $675 (equivalent) in the UK!!!!
I am a long time fan of both you and Rob's. I like his videos of dovetailing. You did a great job though of condensing and explaining parts of his methods. Both of you keep it up.
I'm currently learning carpentry and the dovetail joint was the most difficult endeavour I had faced. This video has blown my mind and will definitely help me in the future. Thank you.
James, This may be the best video of yours that I have ever watched. Excellent.
James, spent a week with Rob a few years back learning from the master glad to see his techniques repeated through your talents.
Well done James, and thanks for giving the shout outs to Rob Cosman's other videos rather than repeating too much. Nice concise video with just the right amount of detail and references. I love what Rob Cosman is doing with his channel and the Purple Heart Foundation, and I've been following his channel for some time now. He's doing some great work (you too BTW).
Nice video James and good on you for giving props to Rob's PHP.
James, another great video. Beyond being a dovetail genius, Rob is q great guy that I know and consider a friend. His PHP has helped numerous combat wounded vets and is supported only by Rob and outside donations. Our East TN Luthiers Guild built a guitar that we are currently doing a silent auction on, with all proceeds going to the PHP.
thank god for your channel. i love these tips that make my life easier.
Thank you so much! I watch Rob's video twice but didn't fully understand it until now!
Thank you! Saving this for a rewatch and will follow the links to learn more from the master himself. I’m below new when it comes to hand-tool woodworking if there is such a thing…but love the idea of a sawdust-free garage…so this is a great video to see!
Excellent video James. Thank you.
I'm sure Rob Cosman appreciates this as well.
I'll stick with my pull saw for dovetails, already own the magnetic jig that works best with a pull saw.
Okay, that offsets idea blew my mind. I've always re-measured. Very nice.
Roy Underhill was a real in-fighter in the wood shop... man kept broken bottles around and would use em at the drop of a spoke-shave.
Concaving the concealed portions of the cuts also produces a volume that wood glue will fill creating a much stronger glue bond.
Many thanks for this extremely helpful video and also for helping Rob with his generous work.
I love Rob Cosman he is IMO the best out there and his teaching style draws me in. I must say, I have been having a hard time with the dovetails and truly understanding his method even though when I would watch him do it I would feel as if I did understand, once I got to the the shop and started I found myself still struggling to figure it out. Until I watched this video. The way you broke down why he did things the benefits of each of Rob's tips and tricks finally made me actually understand and was able to cut my first well fitting Dovetail after about 20 attempts in the past! Thank you and well done video it has taught me a lot.
Rob Cosman is a master genius at his craft! Awesome video! Thanks.
This video stands out to me as the more significant of your collection!
You do a great job of explaining the how and why. Thanks!
Thanks James, another excellent video. I’m a great fan of Rob Cosman and have had the pleasure of meeting him.
great video and yea, the WOW factor took my breath away at the prices on Rob's page but, I understand too, quality is not cheap and in the long run, is worth the investment. Now....what I enjoyed the most...was the plug at the end for veterans and wounded veterans. Classy that is off the charts!!! You did not have to include that....that you did, is worthy of a salute! I'll give you TWO!!
Great job. Rob is a true craftsman. Again great job
Great ideas on cutting the inside rabbet and on the offset marking with the marking gauge! Regarding the cutting angles for the tails, I've trimmed that down to one - straight up by moving the board so that the angled lines orient vertically - as it's alot easier cutting up and down. Also ala Chris Becksvoort - I also lightly tap the scribe line on the outside of the pin waste with a chisel and cut a small shoulder to keep that line crisp and horizontal.
Great tips James. I too follow Rob and totally agree with his methods. Thank you for sharing. Have a great day and stay safe.
Jonathan Katz-Moses has some great tips too and a wonderful guide tool. You had some great tips here Stumpy! Thanks for sharing your knowledge with us.
I learned so much watching this video. You are an excellent teacher. Thank you
Best video I’ve seen for ages, so practical and new tips. Fine tuning a technique that I still find difficult so I’ve got some new ideas to help me.
Thanks very much, and also for the link to a new innovator too.
With a little practice this technique eliminates the need to fine tune the joint. They will fit right off the saw.
Really great presentation. Dovetails are a challenge, but so rewarding!
I watch Rob frequently, also Paul Sellers. After cutting hundreds of dovetails tails first I viewed Frank Klausz doing pins first. Give it a try, it really simplifys the process.
Thank you for taking your time to invite others that may not know Rob and you did awesome job explaining Robs technic!
You bring me back to watching New Yankee Workshop with my Dad! Great explanation! I haven't done any dovetails myself yet but hope I can remember your video when I do!
James, great summary! I've interacted with Rob in person more than once. Everything you stated is true. His tools really do help, but more importantly the techniques make the biggest difference. He is also truly passionate about vets, including his family. I had the opportunity to watch him teach blind dovetails in person, with lots of explanation at each point. He still finished a show-piece quality blind dovetail joinery in 8-10 minutes. I also watched a person clone his method and use a very thin plane shaving as a shim for an extra tight joint. His very first dovetails looked amazing. There is one thing I didn't hear mentioned that really should have been. Rob can sharpen a tool so that it performs like a razor. Yes, his techniques really work. I did several things opposite to see if I could find a better way. Patiently, Rob was always right. I get nothing for saying this. He's a genuinely good person with serious skill. Put an IBC blade in your existing planes. Pick up an IBC chisel too. Learn how Rob sharpens and you'll reach for hand tools before power tools.
I wanted to learn dovetails. watched rob's videos. Bought that marking knife, really nice, and a Katz Moses dovetail guide. Didn't take long to start getting nice looking joints. Not perfect but an excellent start without out tearing my hair out
Glad you mention time and practice. To get going I make some random boxes and used dovetails in projects that don't really need them. Doing each operation accurately gives me excellent results. Having Bad Axe an hour away from me hurt my wallet pretty bad but I feel they're that good. I bought them to reward myself for making decent dovetails.
Excellent ideas in this video especially on transferring your saw cut and offsetting your cut! I have often wondered why some woodworkers do not dove tail the back of the drawer? They just do the front to the sides but no back to the sides.
I believe it is mostly due to the fact that the front needs the support for pulling the drawer out. The back simply follows the pull of the drawer. Not sure if that is clear enough?
I watched a few Rob Cosman's videos years ago, but I didn't see this tips in that videos. Thanks for sharing !
Excellent video. One big mistake I see is folks using a coping saw and thinking it is a fret saw. Once you use a fret saw you will see what a difference it makes. Good work on bringing this to some folks who have never heard of Rob Cosman. My plan for my first week of retirement is to go take his class. Yes his tools are expensive but they fit in the life time investment category and can be past down for generations. They are extremely well built with high quality components.
the tip of using the wheel marking gauge is super helpful thanks !
Love rob’s videos.. ive learned a ton from him.. and is devotion to vets is admirable
I, a complete novice, followed Paul Seller's advice to file a "progressive rake" in the first two inches of teeth. Simple to do and it works great. Likewise he recommends taming the set a bit and shows how to do that. But that offset bit is new to me and very cool.
m oc rob cosman seems a few levels above Paul Sellers! Both good but robs in another league!
Rob Cosman and Frank Klausz are the two best dovetailers I have ever seen, hands down. That's not a knock on Sellers. He's far better than most. But Cosman and Klausz are savants.
Paul Sellers’ videos on preparing a new saw and sharpening with progressive rake are excellent. m oc is referring to his saw sharpening skills, rather than his dovetailing. A dovetail saw prepared the way he shows would work really well for the methods shown here, without spending a lot of money on a saw.
I learned so much from Paul Sellers, that I have the urge to buy him a beer next time I'm back in Blighty.
What metric are you judging that by?
I have only just discovered you and I could listen to you talk for Hours.
It's a great technique that Glen Drake introduced using a feeler gauge to offset the thickness of the blade. I actually like using the marking gauge like Rob does.
Thanks for the insight and links to Rob's efforts. You rock!
🎉 thanks for the solid and straightforward explanation!!
I’m new to wood working and watch a lot of your videos love the content , being a dis able vet with ptsd and tbi my memory sucks so I have to rewatch your vids to learn things , I don’t have many hand tools or funds to buy new hand planes on my wish list is an old jointer plane no 7 I think it is and a good scrub plane , love you hand tool wall it’s my dream to have a few of them old beautiful things
Keep up the good work and I appreciate you informative videos
@Robert faith Rob Cosman works with Vets just like you in the same situation. I strongly suggest you go to his site. They try to help as much as possible, including helping you off with some start off tools. It's not guaranteed but you have great chance based on ur short story. I believe it is like an application so you have to be willing to share ur story.
Good luck and thanks for your service
Ya I tried that but I’m not a Purple Heart recipient
According to Rob’s application form on his web-site, there is no requirement to be a recipient of either Purple Heart or Sacrifice Medal. They like to know if you are but it is not required to apply.
pakster 99 wife just reminded me that they are up north I’m in Texas so with my ptsd the flying is out for me , also there is folks that are way worse off then me , I just keep plugging along and keep trying to get better and let those that are more worthy to go
Apply for his online classes. Free for wounded vets.
Thanks James this is valuable!info for me. Thanks always for sharing. Cheers from BC!
One of the coolest videos you've presented... and the marking knife is brilliant. Thanks again for practical solutions & methods for real projects!
I have been scared to death of doing hand carved dovetails. This video really made me feel alot better about trying it. Needless to say it will be seen if I can actually do it lol. Thanks for the video and info.
Thanks for sharing, as a Vet I find wood working quite therapeutic (until it all goes wrong and looks like a 2 year old cut the joint). I'll definitely be looking at his video and likely the tools as well, if I can squeeze them into a pretty darned tight budget.
Awesome video - I have not watched my Cosman vids for a long time but this has whetted my appetite, thanks!
I love that you did this video!!! Love Rob and his work!!
James, you just summarized Rob’s approach better than Rob does! Great video.
I need to try this immediately I'm not even sure I can wait until the end of the video ahhhhhhhhhh!
I love the way you explain things!!
What is the first practical item a wood crafter should make for his workshop? Thank you for your hard work you put into your content .from across the pond ..God bless you and your family..Lee
Another excellent tutorial. I've been enjoying your videos for a decade. I wanted to ask you about the rabbet on the tails board. Wouldn't that do these two things: 1) shorten the width of the drawer or box and 2) make the pins proud of the tail board? The amount of shortening would be tiny, just 2x the rabbet depth, so probably insignificant. But making proud pins means you have to use some kind of notched caul to set the joint, and then plane away the pins' end grain once you assemble the joint. Care to enlighten us on that? Many thanks!
This is common sense and brilliant. I had considered making a metal jig to make dovetails fast, easy, and accurate. However this is so fast, easy, and accurate I won't need a jig.