thanks , just did a screen replacement and thought it wasn't charging, i gave it a little time like you and hey presto it came to life, you taught me the benefit of a little patience. Thank you for the vid.
Tech tip... apply a coat (or two) of nail polish just above the point on your needle probe and you'll be a lot less likely to cause a short when probing around crowded tight places!
Did you use metal tools to open iPhone and also unplug battery? Brave ! I'm using plastic, hoping it wont leave Mark's on that aluminium body and wont short out bord while going close to power related connector. Yes I'm old school. Great job , like from me !
This was a great video. Even thou its not the kind of video you are shooting for, It great to see you solve the problem. The steps to figuring it out are always cool to see. I say even if its not a board related issue, you should post videos on you troubleshooting anyway. I mean it is important and im sure it will help a lot of people in the long run. Plus you filmed it, so you might as well. Anyway I appreciate it. Im trying to figure out why my moms Iphone 6 wont charge, and you've shown me some great tips and tests I can do that I didnt even know about. So thank you. Hope your staying safe out there. ✌ ✝ ❤
Thank you for the compliments! This is good feedback for sure. I'm planning to post more non-repair videos in-between the repair videos I normally upload. Good luck with your mom's phone! I hope you all are staying safe as well.
Do you know which line from Tristar gives the ok to Tigris to charge the battery? Trying to read the schematic but Apple makes it confusing from standard schematics I'm used to
*This battery reconditioning program exceeded my presumptions. It worked on any drill battery, several AA and AAA batteries, **batery.repair** and any camera battery. The steps are simple and the act itself is exciting to do. No matter what type of battery you`ve got, it is sure to function again!*
Fantastic! You answer my questions before i ask. The pins on the multimeter. Brilliant. I would like to know how you reset that shorted battery. Then i have one question about the iPhone 6. i have one that oddly connects to apple and fully restores (2.8 gigs) just by pressing and holding the home button ONLY. Other than it just sits here, shows a boot screen for 7.6 secs and a black screen 3.2 secs. Thanks for your videos, man. I would not have tried a fix without them.
Hi Jason, great video learnt a lot from this. I have a question. I have fixed several iPhone 6S tristar ICs. Most every time they charge fine after the repair but all the time they drain fast like 1% every minute. The weird thing is that they only drain like that when using the phone but on stand by they don’t drain. I use 320c with airflow at 55 when desoldering the ic when soldering back on the new ic I use less air flow at 45 but same temp. I am using a quick 861DW solder station. Any input of what I might be doing wrong would be greatly appreciated. Thanks!
I'm using 0.7 mm mechanical pencils with 0.68 mm pogo pins soldered into for multimeter probes and for poking while soldering. I really like the way that give me haptic feedback so maybe you'll want to give that a try, too.
That's an awesome idea! I recently bought some new probes but this sounds neat. I've used graphite rods for conductors in quite a few projects but never thought of pencils for probes - I bet mechanical pencils make good probes, plus you can mark with them when needed. cool! Thanks :)
I on the other hand didn't think of using the leads as conductors. I just measured and it might even work when the lead is short. Pogo pins are spring loaded needles used to interface test pads in automated testing. Really cheap,too. The springiness allows to compensate some shakiness and limits the force applied. Really neat for removing the rubbery overcoat or general poking. And they loosely fit mechanical pencils.
I've got a 6 plus that when using an USB Current Monitor is not showing any amps being pulled. Does this mean it's the charging port? I believe it may be, but I was readying and saw that it may be a chip on the board that is the issue. How can you tell the difference if its the chip or just the charging port?
Great video man! Love your work! Learning so much from your videos! You explain so much more then I've seen on other videos, and I don't mind that you repeat yourself haha, it helps drill the information into my brain! That multimeter sure is doing well!! Best Christmas present ever!!
Did you explain the boot loop??? If theres a fully powered battery why would there be a boot loop. wouldntit be the best test before you connect a new charging dock. If I am wrong here could you explain. Is it the case that the charging dock is just to charge the battery. It seeems logical to use a battery thats full 1st. but your was on 3% and dropping power. your answer could get me on my way to a fix. I wait in anticipation for your response. thumbs up.
Hey, i have a question. I took my 5s apart because the phone wont charge or turn on and only showed the battery level on the screen. I opened up the phone and took out the battery and read the battery voltage. It read 2.5 volts. I then connected the battery to a lipo charger and charged it to 3.9 volts. I put it back into the phone and its still doing the same thing. Im thinking its the battery. What are your thoughts?
I have a iphone 6s I had it about a year like a month ago I got battery problems such as leaving it on the charger for a hour and it didn't charge and yes I abused it by using it while it was low now it does nothing will not even cut on you think it's the battery?
I'm somewhat new to repair and am currently preparing to troubleshoot an iPhone 6 with a possible bad charging port as well. This will be my first time using a multimeter (which I've ordered and is on its way) to be sure its a bad port before I go ahead and order any parts. In this phone's case, it will not charge at all. I was told the owner kept having to fiddle with the cable in all sorts of ways to get it to work ever so slightly until it just refused to work altogether (I've tried different cables, so that rules that out) What kind of reading can I expect from the board if the phone is connected and there is absolutely no power flowing through the charging port? The minimum for the battery? Nothing at all? What if I test the battery? What kind of reading should I expect there if its healthy or if its bad? If it turns out to be a board issue, I won't carry through with the repair as I'm not yet that experienced and I lack the proper equipment for it. But a bad battery and/or charging port I can do just fine. I'm good with switching out parts, but this will be my first time reading voltages to diagnose bad parts.
my phone died before and it was fine but this time when i charge it it charges a lil then the logo comes then it becomes a loop after can u help me plz
Hey do you replace logic boards. Apple diagnosed it and all it said is phone won't turn on. All I get is the white screen with the apple logo for 5 seconds then goes off. IPhone 6 Plus. Any thoughts!? Really need your help here man
Can you show a video on how to tell if a iPhone 6 or iPhone 6 Plus battery will "work 100 percent properly"..I have a issue that sometimes after i install the battery, the customer complains that the battery is defective. Either it will not rise in charge or it dies very quickly. Basically how can I predetermine, prior to selling the battery. If the battery is going to work properly. How can I troubleshoot a few things WAY before...so that when the battery is ready to go out the door. I can REST assured that it is 100 percent perfect! And not take a gamble, BASICALLY hopeing for the best. I want to be able to do some tests and look for certain reactions the battery does..when I introduce it to power!
How do you check the voltage going into the display on an iPhone 6s. I recently replaced the battery and charging port on it but it still won’t turn on. The phone definitely had some water damage to it. Any suggestions?
i have the same issue as this on your video, so its more likely the dock connector thats causing the problem? i've replaced the battery and the percentage is increasing but when i leave it on, the percentage is going down while charging. i will purchase an extra dock connector and see what happens when i diagnose it with my multimeter.. if you have any tips it would be very handy so i can fix this iphone 6. thanks in advance.
Troubleshooting iPhone 6/6+ charging issues has proven to be challenging. Sorry, I can't be much help - there's a very good chance that is the Tristar IC or the Tigris IC if battery and dock connector don't fix.
Hello my iPhone 6 does not ignite and does not re-know itunes. I changed the battery(drum kit) and the screen but that does not still work. I tested the motherboard, there is of the tension. what you think that it is the motherboard?
hey I have an iPhone 6 plus that starts up to the apple logo then goes into a boot loop if the battery is dead it will show the charging symbol and the lightning symbol if i unplug the charger, I've already tried different charging flex cables and sometimes it will not go into a boot loop but boot normally and on those times the apple logo shrinks slightly...any ideas?
Hi I have an iPhone 6 that needs repair. I fell in the pool while the phone was on:( it initially worked once out of the pool. I turned it off and let it dry then cleaned it out. Sadly it's refusing to come back to life. Can I have it repaired with you? If so please provide your postage details or directions. Cheers Alejandro
This seems to be one of those videos where they make things so complicated and undesirable to attempt because of the complexity of disassembling and reassembling. You don’t want to deal with it yourself.
A guy I use to know , he talked a good game , could rap off all kinds spec of this that an the other . But usually he just replaced parts till it worked, An then tell the Customer that He rebuilt the phone as it so many issues
sir after i DIY my iphone 6 when i charge it the charge icon appears and boots up and continues to the passcode screen, but suddenly our town got some rotation brown-out. and then after that the current is On but it appears the iphone 6 do not display anymore. theres a charging sound but no display sir
Hiya, I am repairing an iphone 6 and it doesnt appear to be taking a charge. Initially it appeared to be boot looping however I managed to restore the device as somehow it seemed to have taken a little charge. However it does not display any battery icon when off and charging. So it would appear it isnt charging right? Any ideas? Many thanks
I'm assuming that after you succeed in shorting it out you just leave it sit? I wish there was a small explanation as far as that goes. I understand this isn't your specialty nor do I actually know what the hell I'm doing with circuit boards in general
Hi my battery came for iPhone 6s was wrong one too wide but already got old one out punctured it ha.so another comes but phone won’t power up tried other battery too.left charging overnight but nothing iTunes recognises 6s on MacBook but nothing on phone.hAd meter on battery 3.2 volts new one is that enough?
Hi, just subbed to you channel, I've got a iPhone 6 that was plugged in to a car USB double socket,I was charging the phone off one &a a battery pack off the other, cut a long story short the battery pack let out a puff of smoke, and iphone stopped charging, ended up having to get a new lead for phone, it now charges normally up to 100%, but if left on standby it dies after about 7 hours... Any ideas what this could be...I have renewed the battery, but the issue remains..thanks in advance...martin
+Martin The Tristar IC is most likely at fault since you noticed this battery drain immediately after the smoking charger incident. Chargers pop those little ICs in one way or another all the time even without smoke. A very common symptom is battery drain. There are lot of other things it could be though.
i had a charging case on my iphone 6s and dropped it. when i picked it up the screen was off and wont come on or charge or even connect to itunes any suggestions?
I have an iphone 6s that suddenly shuts down, and it wont turn on even if i connect it to wall charger, battery logo doesnt even show. Just dead. I plan on buying a new battery, but i just want to know what do you think is the problem. Hope you answer. Thanks
I dropped my iphone 6 and it went off, after that i turned it on,, the battery level was fluctuating from 21% to 15 % like that in inreasing and decreasing order...The phone was going on and off in between... After that i left it as it was....My phone went off n now it wont charge,, just stuck on 1% or 2, 3 % and it goes off.... Battery level doesnt seem to increase.. What can the problem here?? Any thoughts??
my iPhone 6+ ,is responsive ,it use too power on but now its ruin ,I guess the mother board is a complete teardown ,can I iPhone still power on if ,its teardown...?plus help
Hi fr i have a program my i pbone 6 . When i charging 16 if remove cable charge come 15then maybe 2, or 4 seconds automatic switch off and re start phone then charge in tha screen 1%... Before i change battary. Inside charging cable can u help me what is tha problem
my iphone charges however, it gets warm when i use it and it discharges really really fast, in standby mode and normal usage. I've changed the battery twice now and no difference. What could possible be the problem? is it perhaps a board related problem?
i have an issue where iphone 6 shows it charging then boots to apple logo then goes back to charging symbol and does this over and over , things ive tried to rule out replaced battery and charging port used new original apple cable but cannot restore it as it cant connect to a laptop tried all the old tricks of holding power and home button tricks and even holding just home button then connect to laptop once itunes has loaded none of it works, and finally tried the power and volume up button still no joy is it possible its the tri star that has gone as its had tri star repair last year and was warned by the repair person to get rid as soon as he carried out the repair
Hi there, I've got an iPhone 6 that does not power on. I opened the phone and noticed that the dock connector at the motherboard seems a bit damaged, though I can see all the pins straightened. I get no voltage at all at the battery connector on both the motherboard and the battery. Could this be an IC problem or a connector replacement? Thanks.
Yes it is more likely an IC problem or a short to ground somewhere. From there I normally apply battery voltage from an external supply to the battery terminals and see what the amperage draw is. If it's above 0 amps with the phone off, something is draining the battery.
Well it seems apple likes to update the usage on the battery + charging cuz bifore my ipad culd charge using PC usb after it say laddar inte ;-; but my phone can.... so it can be hard to charge it up again
My iPhone 6 gets hot with battery drain even if I plug the charger... can you tell me what’s wrong with it... I think there may be a short somewhere on the board because phone showing charging but it drains the battery and the logic board is getting heated
my iphone 6 battery charge light stays on and wont rebot! took it to apple store they said its shot, i have 7k pics on it and not backed up! my bad! can i send the phone to you to see if you can salvage fix and replace whats needed?
100% SOLUTION: Remove the phone from it's protective case and place the phone face up on top of a hot oven for 5 mins while plugged in. (Optional: Blow a hairdryer onto the back of the phone) Phone will soon turn itself on automatically.
Oh yeah !!! Thumbs up for the soldered pins !!!! But, just in case you wonder - Fluke TP-88 will do it for you ! )))) it's lead tips extenders, they are kinda long though, I got them for 18$ ebay. Don't know if I will utilize them though, I might just solder sewing needles on my leads.
plug it in to a computer, open device manager, i do this to see if the phone is being detected by the computer.....also..plug in the charger...feel the phone if its warm....warm means power is moving around inside...if its always cold and shows no signs of life...it may be the charger port..thats the cheapest 1st thing to replace...
Hi. I recently replaced the battery in my iPhone 6s and rather stupidly reconnected the battery connector BEFORE I reconnected the digitizer and other screen connectors. When I tried to turn the iPhone on after reassembly, nothing happened. The iPhone was dead. I left the phone on charge overnight, but it is still dead. I tried to see if the iPhone would show in iTunes, but it didn't. I am hoping that my stupidity just killed the battery, but am really concerned I might have shorted the mainboard. Any ideas thoughts on this or how to get the phone working again? Thanks
Just to add to my previous post, I swapped the battery again today and the iPhone booted with everything working - except the Home Button & Touch ID. Happy as I am to have my iPhone 6s back, I am gutted the Home Button & Touch ID are not working. If anyone has any fix for this, please let me know! Thanks. K.
Sorry I'm just reading all of this.. There are a lot of things that it could be. I would really be taking shots in the dark without seeing it though.. it would have to be something around the connector or maybe long screw damage I would think. Hopefully you figured out a solution by now!
hi! i still have an iphone 4s, and i'm kinda having trouble with it.., when i charge it up to 100%, and then disconnect it, but then it starts to drop very fast.... and when the battery drains, and i plug the charger cable and it doesn't charge, it goes in a loop, the apple logo comes on screen and the comes off....i replaced the battery and the dock connector by the way..... do you have any idea of what could it be?
I have a phone that charges to 47 then stops and no higher....Ii then went down a bit 35% and when I plug the charger back I see the lighting bolt indicator but the charge wotn go up.. I replace the power connecter 2 times (I thought the1st one was defective) ... I have installed 3 batteries still the same issue. I want fishing and I'm wonder is salt mist did some damage but I change the charge port because I though it may have been the culprit any ideas..? also I notice my Verizon charger that has a red light indictor that goes red or on for a while the shuts off but the bolt symbol is always there tricking me into thinking it is still charging
My iPhone 6 after connect cable showed charging icon only one. After disconnect and connect again ever more showed this battery charging icon. I exchange the usb port to new one and still nothing. I ve neasured battery. Has 4,8 v
Sir,i’ve iphone 6s there is a problem related to charging,when i connect charging wire to iPhone it’s battery percentage drop by 2% and when remove charging wire from iphone then it’s battery increases by 2% it’s also not charging battery but symbol of charging shows…so i kindly request you to make a video on this issue….
Hi When I test my batteries level it show 2.8. The phone keep try to power up but doesn’t work and go back on the batteries charging screen. Little help ?
I have a question. I replaced my iphone6 battery it worked fine but not is coming on and I get nothing on display even when I try to charge it, the screen is black and does not show anything
Hello! I have a problem that I need some guide, I have an iphone 6 not charging a flat battery but charging the one with current in. I have change Trista ic but no solution. I checked and the is no vcc main voltage in when I plugged the charger cable, but when I connect a power supply of 3.5v, it shows charging? Can some one help with this?
I have an iPhone 6 that charges to 100% as long as phone is powered off. Does not even pick up charger at all, if phone is on. I was thinking 3S problem.
hey, i have a question i have an iphone 6 that will go to the apple boot logo then the screen goes black then the apple logo comes back again and it does it over and over again. Any ideas what it might be ?
I have an iphone 6 plus that wont charge. I connect the charger and it appears to charge but wont power on , when i disconnect the charger it shows on screen to connect the charger. I changed the usb bock port and still have the problem. Im going to buy a new battery to see if thats the problem.
Great Video! Have a question, I plugged 12V into my iphone 6 plus and fried the changing port. However after I put in a new changing port, it still won't charge. Any advice which components should I check? Thank you.
iPhone 6 have charging problem I have full charging my mob but after I can’t Pickup my mob but 5 6 hours iPhone remove all charging so what can I do please help me ?
Hi, i just replaced the screen on my iphone 6 and its not charging. I did lose one on the screws for the plate that goes over the screens ribbon connectors. Will this short curcuit it?
hai, my iPhone 6 cannot turn on and I don't know why. This morning it still okay but I forgot to charge it and I try to charge its back it couldn't open
I am having the same issue with my iphone 6s once I pluged to the charge it is climbing then suddenly it is 2% while it was 10% so I am taking it to the repair shop :( I'v tried to brush the dust and also tried to plug it with another charger !! btw thanks for posting this video :)
Hi! I have a iphone 6 plus. suddenly my phone died. Thought it might be the battery since it was on 0 volt. changed the dock connector and a new battery. The phone is powering on now with new battery, but wont charge. Any ideas?
change tristar ic this should fix your problem, in the future only use orignals USB cables, avoid using car chargers as much is possible that chargers sometimes give you more voltage than normal and fried some ics like tristar ic
thanks , just did a screen replacement and thought it wasn't charging, i gave it a little time like you and hey presto it came to life, you taught me the benefit of a little patience. Thank you for the vid.
Ok
OMG! It works! My iphone 6s cant be open for almost 4 months now. Thank God i see your video. I already opened my phone. Thank you ❤️❤️❤️
What was your volt meter setting you used to test for voltage. and where did you ground the other lead
Great video man!! I was actually researching this problem XD
Tech tip... apply a coat (or two) of nail polish just above the point on your needle probe and you'll be a lot less likely to cause a short when probing around crowded tight places!
Did you use metal tools to open iPhone and also unplug battery? Brave ! I'm using plastic, hoping it wont leave Mark's on that aluminium body and wont short out bord while going close to power related connector.
Yes I'm old school.
Great job , like from me !
This was a great video. Even thou its not the kind of video you are shooting for, It great to see you solve the problem. The steps to figuring it out are always cool to see.
I say even if its not a board related issue, you should post videos on you troubleshooting anyway. I mean it is important and im sure it will help a lot of people in the long run.
Plus you filmed it, so you might as well.
Anyway I appreciate it. Im trying to figure out why my moms Iphone 6 wont charge, and you've shown me some great tips and tests I can do that I didnt even know about. So thank you.
Hope your staying safe out there.
✌ ✝ ❤
Thank you for the compliments! This is good feedback for sure. I'm planning to post more non-repair videos in-between the repair videos I normally upload. Good luck with your mom's phone! I hope you all are staying safe as well.
Do you know which line from Tristar gives the ok to Tigris to charge the battery? Trying to read the schematic but Apple makes it confusing from standard schematics I'm used to
Can anyone tell me what he is using at 12:50. And what is the purpose of this step. Thanks
*This battery reconditioning program exceeded my presumptions. It worked on any drill battery, several AA and AAA batteries, **batery.repair** and any camera battery. The steps are simple and the act itself is exciting to do. No matter what type of battery you`ve got, it is sure to function again!*
Fantastic! You answer my questions before i ask. The pins on the multimeter. Brilliant.
I would like to know how you reset that shorted battery. Then i have one question about
the iPhone 6. i have one that oddly connects to apple and fully restores (2.8 gigs) just by pressing and holding the home button ONLY. Other than it just sits here, shows a boot screen for 7.6 secs and a black screen 3.2 secs. Thanks for your videos, man. I would not have tried a fix without them.
Hi Jason, great video learnt a lot from this. I have a question. I have fixed several iPhone 6S tristar ICs. Most every time they charge fine after the repair but all the time they drain fast like 1% every minute. The weird thing is that they only drain like that when using the phone but on stand by they don’t drain. I use 320c with airflow at 55 when desoldering the ic when soldering back on the new ic I use less air flow at 45 but same temp. I am using a quick 861DW solder station. Any input of what I might be doing wrong would be greatly appreciated. Thanks!
Dude! Your video really helped me!! Thanks so much for making it and giving me hope!
This vid helps a lot. I disconnected the battery 🪫 and connected it back. Battery 🔋 came right up
I'm using 0.7 mm mechanical pencils with 0.68 mm pogo pins soldered into for multimeter probes and for poking while soldering. I really like the way that give me haptic feedback so maybe you'll want to give that a try, too.
That's an awesome idea! I recently bought some new probes but this sounds neat. I've used graphite rods for conductors in quite a few projects but never thought of pencils for probes - I bet mechanical pencils make good probes, plus you can mark with them when needed. cool! Thanks :)
I on the other hand didn't think of using the leads as conductors. I just measured and it might even work when the lead is short.
Pogo pins are spring loaded needles used to interface test pads in automated testing. Really cheap,too. The springiness allows to compensate some shakiness and limits the force applied. Really neat for removing the rubbery overcoat or general poking. And they loosely fit mechanical pencils.
Ahhh I see! I understand now.
I've got a 6 plus that when using an USB Current Monitor is not showing any amps being pulled. Does this mean it's the charging port? I believe it may be, but I was readying and saw that it may be a chip on the board that is the issue. How can you tell the difference if its the chip or just the charging port?
Great video man! Love your work! Learning so much from your videos! You explain so much more then I've seen on other videos, and I don't mind that you repeat yourself haha, it helps drill the information into my brain! That multimeter sure is doing well!! Best Christmas present ever!!
Did you explain the boot loop??? If theres a fully powered battery why would there be a boot loop. wouldntit be the best test before you connect a new charging dock. If I am wrong here could you explain. Is it the case that the charging dock is just to charge the battery. It seeems logical to use a battery thats full 1st. but your was on 3% and dropping power. your answer could get me on my way to a fix. I wait in anticipation for your response. thumbs up.
I went to check the voltage of my battery and when I touched the spot it sparked. I get a apple logo boot loop
Is there on market place a simple charging port rigid where you can just plunk the set I whether I Phone or I Pad similar to the days of the I Pods?
I meant a charging dock... to slide your phone down on it thanks .🤷🏼♂️
Hey, i have a question. I took my 5s apart because the phone wont charge or turn on and only showed the battery level on the screen. I opened up the phone and took out the battery and read the battery voltage. It read 2.5 volts. I then connected the battery to a lipo charger and charged it to 3.9 volts. I put it back into the phone and its still doing the same thing. Im thinking its the battery. What are your thoughts?
I would try the battery first but there is a lot of stuff that can cause them to not charge properly.
Z.A.K. RC most of the time that I see a battery with enough voltaje to turn on but it just won't turn on. replacing the battery does it.
Yered Martinez yeah, that did the trick, got a new battery and it works like new.
if it persistsafter replacement, its a faulty U2 IC Chip failure.
I have a iphone 6s I had it about a year like a month ago I got battery problems such as leaving it on the charger for a hour and it didn't charge and yes I abused it by using it while it was low now it does nothing will not even cut on you think it's the battery?
hey Janson nice work to find out what's the exact problem. bro where your mic
Hi , which spray or chemical did you use on the circuit pls?
Freeze Spray...gokimco.com/blog/using-compressed-air-to-trouble-shoot-circuit-boards-freeze-sprays/
Was that a fluke 11 or 12. I use one too. Best ever. Had to replace LCD connections. Thanks for video champ
I'm somewhat new to repair and am currently preparing to troubleshoot an iPhone 6 with a possible bad charging port as well.
This will be my first time using a multimeter (which I've ordered and is on its way) to be sure its a bad port before I go ahead and order any parts.
In this phone's case, it will not charge at all. I was told the owner kept having to fiddle with the cable in all sorts of ways to get it to work ever so slightly until it just refused to work altogether (I've tried different cables, so that rules that out)
What kind of reading can I expect from the board if the phone is connected and there is absolutely no power flowing through the charging port? The minimum for the battery? Nothing at all?
What if I test the battery? What kind of reading should I expect there if its healthy or if its bad?
If it turns out to be a board issue, I won't carry through with the repair as I'm not yet that experienced and I lack the proper equipment for it. But a bad battery and/or charging port I can do just fine. I'm good with switching out parts, but this will be my first time reading voltages to diagnose bad parts.
I have an iPhone it's completely unresponsive. Won't charge, icon won't come on or anything. Is it battery problem for sure?
Same issue, did you get yours fixed?
I ordered a battery hopefully its the battery with mine.
same problem did anyone figure it out?
It doesn't help
Same i had my battery replaced. But a few weeks after it was completely unresponsive
i like the simple fixs too, still learning.
my phone died before and it was fine but this time when i charge it it charges a lil then the logo comes then it becomes a loop after can u help me plz
Same
At what terminals you were checking the voltage
my iphone 6 sometimes it charge i allready clean where the conector goes any ideas the cable is original from apple thank you
Add me on Whatsapp if you are interested in buying iPhone or fix damage phone chat me on Whatsapp +2348057897455
Hi sir I have iPad A1566 model.ats not charging on stak one parsant.but I chang u2 ic but same same.any sajetion.thanks
What is the dot protector? My phone had the same problem.
Look at the dock connector 4:07 it seems damaged. Look closely
boss do you have video for how to test mobile phone using multi meter ?
continuity
resistance
Hey do you replace logic boards. Apple diagnosed it and all it said is phone won't turn on. All I get is the white screen with the apple logo for 5 seconds then goes off. IPhone 6 Plus. Any thoughts!? Really need your help here man
Valter Medeiros Gotta reball the NAND or CPU depending on the circumstances. They are not making good connection does making it reboot
Is there serial number somewhere inside the case?
how would you test the voltage on an iphone 5s. There doesn't seem to be a place to put my meter.
So what happens if you have ZERO power at the little dot by the battery connector where you are probing?
Can you show a video on how to tell if a iPhone 6 or iPhone 6 Plus battery will "work 100 percent properly"..I have a issue that sometimes after i install the battery, the customer complains that the battery is defective. Either it will not rise in charge or it dies very quickly. Basically how can I predetermine, prior to selling the battery. If the battery is going to work properly. How can I troubleshoot a few things WAY before...so that when the battery is ready to go out the door. I can REST assured that it is 100 percent perfect! And not take a gamble, BASICALLY hopeing for the best. I want to be able to do some tests and look for certain reactions the battery does..when I introduce it to power!
Raffaele Santoro buy an oem batteries.
Have you tried using a load tester?
How do you check the voltage going into the display on an iPhone 6s. I recently replaced the battery and charging port on it but it still won’t turn on. The phone definitely had some water damage to it. Any suggestions?
Same problem me to service center said mother borad should replace
i have the same issue as this on your video, so its more likely the dock connector thats causing the problem? i've replaced the battery and the percentage is increasing but when i leave it on, the percentage is going down while charging. i will purchase an extra dock connector and see what happens when i diagnose it with my multimeter.. if you have any tips it would be very handy so i can fix this iphone 6. thanks in advance.
Troubleshooting iPhone 6/6+ charging issues has proven to be challenging. Sorry, I can't be much help - there's a very good chance that is the Tristar IC or the Tigris IC if battery and dock connector don't fix.
Hello my iPhone 6 does not ignite and does not re-know itunes.
I changed the battery(drum kit) and the screen but that does not still work.
I tested the motherboard, there is of the tension.
what you think that it is the motherboard?
hey I have an iPhone 6 plus that starts up to the apple logo then goes into a boot loop if the battery is dead it will show the charging symbol and the lightning symbol if i unplug the charger, I've already tried different charging flex cables and sometimes it will not go into a boot loop but boot normally and on those times the apple logo shrinks slightly...any ideas?
Hi I have an iPhone 6 that needs repair. I fell in the pool while the phone was on:( it initially worked once out of the pool. I turned it off and let it dry then cleaned it out. Sadly it's refusing to come back to life. Can I have it repaired with you? If so please provide your postage details or directions. Cheers Alejandro
thank you for your help video was very helpful
Like this video clear and precise thanks
Thanks for watching and commenting :)
This seems to be one of those videos where they make things so complicated and undesirable to attempt because of the complexity of disassembling and reassembling. You don’t want to deal with it yourself.
A guy I use to know , he talked a good game , could rap off all kinds spec of this that an the other . But usually he just replaced parts till it worked, An then tell the Customer that He rebuilt the phone as it so many issues
sir after i DIY my iphone 6 when i charge it the charge icon appears and boots up and continues to the passcode screen, but suddenly our town got some rotation brown-out. and then after that the current is On but it appears the iphone 6 do not display anymore. theres a charging sound but no display sir
How much is it to get it fixed??
Just in time! Thanks
np! I've had Tristar IC issues behave this way too but this one wasn't the case.
Hiya, I am repairing an iphone 6 and it doesnt appear to be taking a charge. Initially it appeared to be boot looping however I managed to restore the device as somehow it seemed to have taken a little charge. However it does not display any battery icon when off and charging. So it would appear it isnt charging right? Any ideas? Many thanks
I'm assuming that after you succeed in shorting it out you just leave it sit? I wish there was a small explanation as far as that goes. I understand this isn't your specialty nor do I actually know what the hell I'm doing with circuit boards in general
Hi my battery came for iPhone 6s was wrong one too wide but already got old one out punctured it ha.so another comes but phone won’t power up tried other battery too.left charging overnight but nothing iTunes recognises 6s on MacBook but nothing on phone.hAd meter on battery 3.2 volts new one is that enough?
Hi, just subbed to you channel, I've got a iPhone 6 that was plugged in to a car USB double socket,I was charging the phone off one &a a battery pack off the other, cut a long story short the battery pack let out a puff of smoke, and iphone stopped charging, ended up having to get a new lead for phone, it now charges normally up to 100%, but if left on standby it dies after about 7 hours... Any ideas what this could be...I have renewed the battery, but the issue remains..thanks in advance...martin
+Martin The Tristar IC is most likely at fault since you noticed this battery drain immediately after the smoking charger incident. Chargers pop those little ICs in one way or another all the time even without smoke. A very common symptom is battery drain. There are lot of other things it could be though.
i had a charging case on my iphone 6s and dropped it. when i picked it up the screen was off and wont come on or charge or even connect to itunes any suggestions?
Bro i have a question i hope you can help me i have iphone 6 plus and it does not go upto 87 charge @STS Telecom
I have an iphone 6s that suddenly shuts down, and it wont turn on even if i connect it to wall charger, battery logo doesnt even show. Just dead. I plan on buying a new battery, but i just want to know what do you think is the problem. Hope you answer. Thanks
I dropped my iphone 6 and it went off, after that i turned it on,, the battery level was fluctuating from 21% to 15 % like that in inreasing and decreasing order...The phone was going on and off in between... After that i left it as it was....My phone went off n now it wont charge,, just stuck on 1% or 2, 3 % and it goes off.... Battery level doesnt seem to increase.. What can the problem here?? Any thoughts??
Fix it?
my iPhone 6+ ,is responsive ,it use too power on but now its ruin ,I guess the mother board is a complete teardown ,can I iPhone still power on if ,its teardown...?plus help
Hi fr i have a program my i pbone 6 . When i charging 16 if remove cable charge come 15then maybe 2, or 4 seconds automatic switch off and re start phone then charge in tha screen 1%... Before i change battary. Inside charging cable can u help me what is tha problem
my iphone charges however, it gets warm when i use it and it discharges really really fast, in standby mode and normal usage. I've changed the battery twice now and no difference. What could possible be the problem? is it perhaps a board related problem?
i have an issue where iphone 6 shows it charging then boots to apple logo then goes back to charging symbol and does this over and over , things ive tried to rule out replaced battery and charging port used new original apple cable but cannot restore it as it cant connect to a laptop tried all the old tricks of holding power and home button tricks and even holding just home button then connect to laptop once itunes has loaded none of it works, and finally tried the power and volume up button still no joy is it possible its the tri star that has gone as its had tri star repair last year and was warned by the repair person to get rid as soon as he carried out the repair
Hi there, I've got an iPhone 6 that does not power on. I opened the phone and noticed that the dock connector at the motherboard seems a bit damaged, though I can see all the pins straightened. I get no voltage at all at the battery connector on both the motherboard and the battery. Could this be an IC problem or a connector replacement? Thanks.
Yes it is more likely an IC problem or a short to ground somewhere. From there I normally apply battery voltage from an external supply to the battery terminals and see what the amperage draw is. If it's above 0 amps with the phone off, something is draining the battery.
I've went ahead and fed power to the battery connector and it powers up normally, could it just be the dock connector?
After further review (hehe). I'll send it in.
Well it seems apple likes to update the usage on the battery + charging cuz bifore my ipad culd charge using PC usb after it say laddar inte ;-; but my phone can.... so it can be hard to charge it up again
I have a question I have a iPhone 6s it won't turn on or show the charging symbol what do u think the problem is
My iPhone 6 gets hot with battery drain even if I plug the charger... can you tell me what’s wrong with it... I think there may be a short somewhere on the board because phone showing charging but it drains the battery and the logic board is getting heated
my iphone 6 battery charge light stays on and wont rebot! took it to apple store they said its shot, i have 7k pics on it and not backed up! my bad! can i send the phone to you to see if you can salvage fix and replace whats needed?
toastopia1 did you get your phone fixed?
100% SOLUTION:
Remove the phone from it's protective case and place the phone face up on top of a hot oven for 5 mins while plugged in. (Optional: Blow a hairdryer onto the back of the phone) Phone will soon turn itself on automatically.
Oh yeah !!! Thumbs up for the soldered pins !!!! But, just in case you wonder - Fluke TP-88 will do it for you ! )))) it's lead tips extenders, they are kinda long though, I got them for 18$ ebay. Don't know if I will utilize them though, I might just solder sewing needles on my leads.
Thanks! :D
STS Telecom. My iphone 6 will not charge or even turn on I need advice
plug it in to a computer, open device manager, i do this to see if the phone is being detected by the computer.....also..plug in the charger...feel the phone if its warm....warm means power is moving around inside...if its always cold and shows no signs of life...it may be the charger port..thats the cheapest 1st thing to replace...
Hi. I recently replaced the battery in my iPhone 6s and rather stupidly reconnected the battery connector BEFORE I reconnected the digitizer and other screen connectors. When I tried to turn the iPhone on after reassembly, nothing happened. The iPhone was dead. I left the phone on charge overnight, but it is still dead. I tried to see if the iPhone would show in iTunes, but it didn't. I am hoping that my stupidity just killed the battery, but am really concerned I might have shorted the mainboard. Any ideas thoughts on this or how to get the phone working again? Thanks
Just to add to my previous post, I swapped the battery again today and
the iPhone booted with everything working - except the Home Button &
Touch ID. Happy as I am to have my iPhone 6s back, I am gutted the
Home Button & Touch ID are not working. If anyone has any fix for
this, please let me know! Thanks. K.
Sorry I'm just reading all of this.. There are a lot of things that it could be. I would really be taking shots in the dark without seeing it though.. it would have to be something around the connector or maybe long screw damage I would think. Hopefully you figured out a solution by now!
my battery die very fast on my iphone 6 i change the battery still the same do you think is the u2 chip,or something else?
baftijari u2 chip. i had the same problem
i just stop everything like location on,background app refresh and is ok now ;)
It WORKED FOR ME THANK U SO MUCH THANK U THANK U
i have a question, serkan from norway
My phone only goes to .70 volts. Any thoughts
hi! i still have an iphone 4s, and i'm kinda having trouble with it.., when i charge it up to 100%, and then disconnect it, but then it starts to drop very fast.... and when the battery drains, and i plug the charger cable and it doesn't charge, it goes in a loop, the apple logo comes on screen and the comes off....i replaced the battery and the dock connector by the way..... do you have any idea of what could it be?
Add me on Whatsapp if you are interested in buying iPhone or fix damage phone chat me on Whatsapp +2348057897455
I have a phone that charges to 47 then stops and no higher....Ii then went down a bit 35% and when I plug the charger back I see the lighting bolt indicator but the charge wotn go up.. I replace the power connecter 2 times (I thought the1st one was defective) ... I have installed 3 batteries still the same issue. I want fishing and I'm wonder is salt mist did some damage but I change the charge port because I though it may have been the culprit any ideas..? also I notice my Verizon charger that has a red light indictor that goes red or on for a while the shuts off but the bolt symbol is always there tricking me into thinking it is still charging
sounds like a logic board issue. you changed battery, and charger port...last step is tristar
My iPhone 6 after connect cable showed charging icon only one. After disconnect and connect again ever more showed this battery charging icon. I exchange the usb port to new one and still nothing.
I ve neasured battery. Has 4,8 v
you are the best bro
I have a 6s that itunes reads, shows its charging but the battery drains instead of charging amp meter show 0
Sir,i’ve iphone 6s there is a problem related to charging,when i connect charging wire to iPhone it’s battery percentage drop by 2% and when remove charging wire from iphone then it’s battery increases by 2% it’s also not charging battery but symbol of charging shows…so i kindly request you to make a video on this issue….
Hi
When I test my batteries level it show 2.8. The phone keep try to power up but doesn’t work and go back on the batteries charging screen. Little help ?
Hey, it really shouldn't try to power up at 2.8. I would be willing to bed that it's a bad battery. Did you try a battery?
I have a question. I replaced my iphone6 battery it worked fine but not is coming on and I get nothing on display even when I try to charge it, the screen is black and does not show anything
Mehrdad Nankali same smh
Its the u2 charging chip when u can inly charge it with phone turned on then its the chip not the battery mine is fix now
Hello! I have a problem that I need some guide, I have an iphone 6 not charging a flat battery but charging the one with current in. I have change Trista ic but no solution. I checked and the is no vcc main voltage in when I plugged the charger cable, but when I connect a power supply of 3.5v, it shows charging? Can some one help with this?
I have an iPhone 6 that charges to 100% as long as phone is powered off. Does not even pick up charger at all, if phone is on. I was thinking 3S problem.
hey, i have a question i have an iphone 6 that will go to the apple boot logo then the screen goes black then the apple logo comes back again and it does it over and over again. Any ideas what it might be ?
Roosted Turkey. mine do the same did you get yours fixed yet ?
l have the Same
My phone completely dosent turn on or it doesn’t charge will putting a new battery in help
Jaweria Hussain did you get an answer? I have same issue.
same
I have an iphone 6 plus that wont charge. I connect the charger and it appears to charge but wont power on , when i disconnect the charger it shows on screen to connect the charger. I changed the usb bock port and still have the problem. Im going to buy a new battery to see if thats the problem.
WTF_NENE did a new battery work
Great Video!
Have a question, I plugged 12V into my iphone 6 plus and fried the changing port. However after I put in a new changing port, it still won't charge. Any advice which components should I check? Thank you.
tristar ic, any iphone only you must put on it 3.8 to 4.2V as maximum otherwise you will fried more components on motherboard
hwis that when the standard apple block is 5v 1a?
I'v same problem with my iphone 6 i changed charging flex but fault not solved.. what can i do for solve it???
I learned nothing in this video.
Too bad
Me too..
iPhone 6 have charging problem I have full charging my mob but after I can’t Pickup my mob but 5 6 hours iPhone remove all charging so what can I do please help me ?
Hi, i just replaced the screen on my iphone 6 and its not charging. I did lose one on the screws for the plate that goes over the screens ribbon connectors. Will this short curcuit it?
Losing a screw wouldn't hurt anything but putting a screw back in the wrong place could cause it.
I love yours job!
My iPhone 6 charges but does not get recognized by any computer. Also Tristar ?
hai, my iPhone 6 cannot turn on and I don't know why. This morning it still okay but I forgot to charge it and I try to charge its back it couldn't open
Thanks for posting.
Thanks for watching! :)
I am having the same issue with my iphone 6s once I pluged to the charge it is climbing then suddenly it is 2% while it was 10% so I am taking it to the repair shop :( I'v tried to brush the dust and also tried to plug it with another charger !!
btw thanks for posting this video :)
You're welcome :) I bet that winds up being your battery. Hopefully they get it fixed for ya!
Hi!
I have a iphone 6 plus. suddenly my phone died. Thought it might be the battery since it was on 0 volt. changed the dock connector and a new battery. The phone is powering on now with new battery, but wont charge.
Any ideas?
change tristar ic this should fix your problem, in the future only use orignals USB cables, avoid using car chargers as much is possible that chargers sometimes give you more voltage than normal and fried some ics like tristar ic
thank you =)
Sorry Sir Haugen, I overlooked this one. I see you registered. I will do my best to help :)
thank you so much :)