Free Plans, Parts, Wiring Diagrams, Instructions to build the board for in a tech school classroom! www.acservicetech.com/post/hvac-electrical-training-board-for-wiring-components-wiring-diagrams-troubleshooting
Wow this is legendary stuff here. Took me 6 months in learning the hard way and I just got it when you explained it so thoroughly and actually showed what you were doing clearly. Awesome job and thank you for teaching all of us younger techs how to handle service calls like a pro. 👍💯
Amazing material and well transmitted years of sweat, tears and working glory of knowledge condensed into bite sizes within a short video … BRAVO! That is what PROS do…generate another generation of PROS! 👍🏼
my grandson failed one of his hvac tests or maybe it was an exam. I showed him this site hopefully he'll do better. Thanks so much for sharing your knowledge!
@@acservicetechchannel 🙏 I second that...your videos are gold just like the sun. They’ve helped me with my job and I’m now using what I’ve learned with more confidence. Thank you and God Bless you🙏
This is really amazing stuff, so many scenarios, explained really well and shown everything, this must've taken some time to setup and do, thank you for the vid, one of the best channels on youtube.
I've wanted to make something like your little demo board for a while. If you put it in a closed box with it set for heating, that light bulb might actually get it to a reasonable setpoint.
Watching your videos I realized I have a problem. I have a old 1992 carrier furnace with a two wire thermostat. My problem is I noticed my blower motor comes on First. Over the years my pilot light kept going out. Now I know why. What do you think the problem is. Is it wired incorrectly. I am stumped. Any help would greatly be appreciated. Your videos are very educational Thank you
Late night release schedule? ;) Would you want to do a video collaboration for fun at some point? Our channels are similar so it might work out well. Blessings, Ben
Hey so I’m new to the HVA/C 2 month in class actually and we’re going over the wiring and I have one main question with the thermostat. Would you need the system on and running and power going to it to trouble shoot any problem that can occur in the thermostat? If you need the system off would you turn it off from the breaker or would it technically turn off when you take the face plate but power would still be going to it so you can trouble shoot? Or is it depending on what problem is being trouble shooted? Thanks
My method is to turn it off at the breaker if I need it off. A long time, I chased my tail when someone turn the thermostat down while I was in a crawlspace.
Hey Craig. Are you doing any early spring promos in your store anytime soon? Im eyeing a few things and wasn't sure of you do that? Also awesome job sir always great content!
can someone explain why we measure voltage between common and any other terminal? and how exactly does measuring voltage work please if someone can explain thank you
Hello love your videos, i hear you on the videos you saying that you teach the students, do you have classes where you teach hvac? Because im interested.
Have you done any videos on oil traps in refrigeration systems? What there purpose is and how they work.. Use of traps in vertical/long line sets.. I was unable to locate any videos on the topic.
Question sir, why is the purpose of checking for ohms. I know it has to do with resistance, but what does that tell us. when checking for ohms power must always be off?
Omhs is also able to tell you if your wire is connected/not broken solid wire will read a very low ohms value depending on the length of the run. Broken wire will read OL
Shouldn’t the fan comes on first then the heating element after in heating mode And when the heating mode is turn off the reverse should happen meaning the heating element is close while the fan remains running until the heating element comes down to an acceptable level before shutting off
Free Plans, Parts, Wiring Diagrams, Instructions to build the board for in a tech school classroom! www.acservicetech.com/post/hvac-electrical-training-board-for-wiring-components-wiring-diagrams-troubleshooting
Wow this is legendary stuff here. Took me 6 months in learning the hard way and I just got it when you explained it so thoroughly and actually showed what you were doing clearly. Awesome job and thank you for teaching all of us younger techs how to handle service calls like a pro. 👍💯
That is very encouraging Max, thanks!!!
Amazing material and well transmitted years of sweat, tears and working glory of knowledge condensed into bite sizes within a short video … BRAVO! That is what PROS do…generate another generation of PROS! 👍🏼
Thank you so much Benjamin!
Yes, outstanding! Much appreciated.
You don't have to help, but you do. Thanks so much for your time and knowledge.
Dude you rocked it on this display board set up. Very nicely done. And I know it took a bit of time designing and assembling. Really nicely done.
my grandson failed one of his hvac tests or maybe it was an exam. I showed him this site hopefully he'll do better. Thanks so much for sharing your knowledge!
That is awesome Craig. Great way for people to learn by building and testing at home. That's always the best way to learn.
This guy has a god given talent of explaining things👍Keep up the great work man!
Thank you so much and I do thank the Lord for being able to share with others so that they can grow, thanks!
@@acservicetechchannel 🙏 I second that...your videos are gold just like the sun. They’ve helped me with my job and I’m now using what I’ve learned with more confidence. Thank you and God Bless you🙏
This is really amazing stuff, so many scenarios, explained really well and shown everything, this must've taken some time to setup and do, thank you for the vid, one of the best channels on youtube.
@acservicetechannel you should publish a book with trouble shooting it’ll be great to have for beginners
Thank you 🙏
You are the best, I feel i am in the best school ever. Thank you again
How are you introducing the faults? This is an awesome all in one instructional system! Great Job!
We just set them ourselves for the vid while the power was off, thanks!!
I really appreciate all of your videos
This is very useful video sir
Thank you so much!
What a heart of a teacher. Thank you Craig. What size of fuse is that?
That is a 3 amp lil popper breaker. I have the model numbers of each of the components at the website, thanks!
Wow your amazing teacher and u make it all make sense
Thanks so much for your encouragement!!!
Display board is dope! Good stuff
Love this
Dave, glad you enjoyed it!
This is beautiful
Thank you
I do so use hot lines for switches on series parallel circuits, much much more than a neutral on a switch!
You are the best, thanks
Nice presentation!!
Great video. Heck I even watched it twice. Thanks for sharing.
Thank you...for this great video...
Glad you enjoyed it Robert!
Great Job....
Thanks a lot Paul!
This a great video. Thanks a lot also for the free downloadable plans of this project.
Thank you!
Great hvac diag video
I've wanted to make something like your little demo board for a while. If you put it in a closed box with it set for heating, that light bulb might actually get it to a reasonable setpoint.
Can you please make a tutorial about 2 stage units diagnostic and refrigerant charging.
Can you make more borders with different diagrams because i like it a lot what you doing
I can not thank you enough
Awesome video Craig.
Great Mock Up And Vid Thanks Very Much for Sharing
Great training. Thanks
It’s very nice explanation great video
This video made me subscribed 💪🎯
Very niece sir ❤❤❤
Excellent!
Good video, thanks for the information
Ty so much I learn a lot
The lamp needs to be fixed?
Great information video
Good job
That imaginary setup is the system from hell! 😬🤯
This is you useful video sir
Great video.
Very educational, thank you! What gloves are you using during the demonstration?
Good troubleshooting techniques. Thanks Craig.
Watching your videos I realized I have a problem. I have a old 1992 carrier furnace with a two wire thermostat. My problem is I noticed my blower motor comes on First. Over the years my pilot light kept going out. Now I know why. What do you think the problem is. Is it wired incorrectly. I am stumped. Any help would greatly be appreciated. Your videos are very educational Thank you
Always great content thanks you again
Late night release schedule? ;)
Would you want to do a video collaboration for fun at some point? Our channels are similar so it might work out well.
Blessings,
Ben
Love your videos💜😃
Hey Benjamin, thanks for the invite! Can you send over your contact info to info@acservicetech.com thanks!
That would be great !!...
And Thank you guys for all the FREE A/C videos .
Blessings.
That would be great !!...
And Thank you guys for all the FREE A/C videos .
Blessings.
Hey so I’m new to the HVA/C 2 month in class actually and we’re going over the wiring and I have one main question with the thermostat. Would you need the system on and running and power going to it to trouble shoot any problem that can occur in the thermostat? If you need the system off would you turn it off from the breaker or would it technically turn off when you take the face plate but power would still be going to it so you can trouble shoot? Or is it depending on what problem is being trouble shooted? Thanks
My method is to turn it off at the breaker if I need it off. A long time, I chased my tail when someone turn the thermostat down while I was in a crawlspace.
Hey Craig. Are you doing any early spring promos in your store anytime soon? Im eyeing a few things and wasn't sure of you do that? Also awesome job sir always great content!
Good job. What's the price of the platter??
Can you do 1 for heat pump
I accidentally twisted Common and R an blew the transformer once. Why does that not happen when you touch Common to R with the multimeter probes ?
Your awesome
can someone explain why we measure voltage between common and any other terminal? and how exactly does measuring voltage work please if someone can explain thank you
Hello love your videos, i hear you on the videos you saying that you teach the students, do you have classes where you teach hvac? Because im interested.
Have you done any videos on oil traps in refrigeration systems? What there purpose is and how they work.. Use of traps in vertical/long line sets.. I was unable to locate any videos on the topic.
Great video, thanks.
Do you have electrical diagram for this whole system, would be extremely helpful to read electrical diagram
Absolutely we do! Its over at our website at www.acservicetech.com in the respource section thanks!
Question sir, why is the purpose of checking for ohms. I know it has to do with resistance, but what does that tell us. when checking for ohms power must always be off?
Omhs is also able to tell you if your wire is connected/not broken solid wire will read a very low ohms value depending on the length of the run. Broken wire will read OL
@@uppy8862 thank you for the reply
Thanks for teh video =)
So we can use this on all havac troubleshooting?
Shouldn’t the fan comes on first then the heating element after in heating mode And when the heating mode is turn off the reverse should happen meaning the heating element is close while the fan remains running until the heating element comes down to an acceptable level before shutting off
Great video though
Very informative indeed
Keep up the good work
Just to let you know I learned series circuits, parallel circuits and series/ parallel circuits!
Thanks Craig. Question what if you removed the t-stat and the fan is still running? What’s the issue?
Blower fan relay
There has to be an easier way.
❤👍
1
Good video except you aren't seeing your troubleshooting techniques through the eyes of an apprentice.
David. what do you suggest? i am just showing so techs know how i would go through this, thanks!