Creality K1 vs K1C | Which 3D Printer is Worth your Money!?

แชร์
ฝัง
  • เผยแพร่เมื่อ 17 พ.ค. 2024
  • The Creality K1C! The new kid on the block! Is it better than its slightly cheaper, barely less capable older brother? Let’s find out while we compare these 2 VERY similar 3D Printers from Creality!
    ▼ MENTIONED IN VIDEO
    Websit: bit.ly/3OY0Ix1
    Amazon: amzn.to/3uHKgu0
    ▼ SOCIAL MEDIA / CONTACT
    Inquiries | bit.ly/3xQmgAS
    Instagram | / frankly_built
    TikTok | / frankly_built
    Twitch | / frankly_built
    Twitter | / frankly_built
    Facebook | / franklybuilt
    Reddit | / njtricker609
    Discord Community | / discord
    ▼ SUPPORT THE CHANNEL!
    Patreon | / franklybuilt
    My Etsy | www.etsy.com/shop/FranklyBuilt
    Frankly Built Merch | bit.ly/3AechHF
    ▼AFFILIATE AND DISCOUNT CODES!
    ELEGOO| tinyurl.com/yvf6v6cm
    ☞ Visit Elegoo for my favorite FDM 3D printers, from entry
    level to advanced!
    CREALITY | bit.ly/3gV8iIo
    ☞ Visit Creality for a variety of FDM 3D printers, from entry
    level to advanced!
    EPAX 3D | epax3d.com?ref=25
    ☞ Visit EPAX 3D for my favorite resin 3D printers!
    Use code “franklybuilt” for 10% off of E10 Series Resin Printer
    DO3D | bit.ly/3zWo8tC
    ☞ Use Code “FBT20” at checkout for 20% off awesome
    3D models and files!
    AMAZON | www.amazon.com/shop/franklybuilt
    ☞ Visit my Amazon Store Front and explore my favorite printers,
    filaments, build supplies and more!
    SUNLU FILAMENT | bit.ly/3gXbSAo
    ☞ Use Code “VQLDTFWBMQ” at checkout for 10% off filament!
    Disclaimer- This video is sponsored by Creality. Honesty is very important to me and my channel- all thoughts and opinions mentioned are my own. This video is NOT sponsored by any of the other brands mentioned above or throughout this video. The links provided above are affiliate links. Affiliate links allow me to make a small commission from purchases made on my recommendations, with no additional cost to the customer!
    Thank you for supporting me!
    ▼TIME STAMPS
    0:00- Intro

    #3dprinting #3dprinted #review
  • บันเทิง

ความคิดเห็น • 127

  • @Logan3Dprints
    @Logan3Dprints 28 วันที่ผ่านมา +20

    My TechED teacher bought a original K1 and it worked fine for about a week. The amount of time I've been in that TechED room trying to figure out what was wrong with the printer is crazy.

  • @Willeumleeper
    @Willeumleeper 27 วันที่ผ่านมา +35

    Frank can i call you frank anyways i just wanted to say thank you from the bottom of my heart thank you I'm 14 and I'm struggling with a deep depression but your videos got me into 3d printing which was bean almost better then therapy for me so i just want to thank you even if you didn't know for saving me.

    • @JonLaRue
      @JonLaRue 27 วันที่ผ่านมา +1

      You’re awesome. I like you. Never stop, never stopping.

    • @Willeumleeper
      @Willeumleeper 27 วันที่ผ่านมา

      @@JonLaRue thanks

    • @Willeumleeper
      @Willeumleeper 27 วันที่ผ่านมา

      my printer has ben broken for almost a year tho

    • @georgetickner3080
      @georgetickner3080 16 วันที่ผ่านมา

      ​@@Willeumleeper no way dude, I'm 14 and just fixed my ender 3 that's crazy

  • @daledon69
    @daledon69 28 วันที่ผ่านมา +11

    i got my k1c about a month ago and been printing non stop, with PLA, Silk and CF. This is my very first 3d printer and as a complete noob to 3d printing the k1c hasn't failed me at all besides the usual user fault issues, Its been a very good experience coming into the 3d printing world because of the k1c. I definitely recommend to anyone new that wants to get into 3d printing.

    • @RichM1967
      @RichM1967 27 วันที่ผ่านมา +1

      Same experiance for me. Out of the box it works fine, Usually its just download the STL, set the right filament in Orca slicer or the new Creality Print 5 and print.

  • @AmTrey
    @AmTrey 27 วันที่ผ่านมา

    You helped me make my decision! I’ve been debating between the two of these for a while. Thank you!

  • @AndyRC
    @AndyRC 28 วันที่ผ่านมา +8

    And one thing that you did not mention is that the k1c has a different set of smaller pulleys and smaller motors. This was done to improve the VFA issue the k1 has. Cheers take care

  • @trenttownsend4948
    @trenttownsend4948 26 วันที่ผ่านมา

    Hey Frank, you’ve absolutely inspired me as someone about to start life in a new stage going on to University- watching your content gave me something to hang onto through some stressful experiences and gave me a new hobby which I’ve begun to love so much. Great stuff man, appreciate you so much

  • @Janue_
    @Janue_ 9 วันที่ผ่านมา +1

    I got the K1 as my very first 3D printer after they fixed the issues for $349 on Black Friday. I upgraded my hotend to a Micro Swiss FlowTech and added the AI camera. I’ve had issues with under extrusion at 1 corner, but I just lower retraction and increase the extra prime amount. I’ve also noticed that the print quality is affected by the stability of the surface it’s sitting on. I wasted time changing values and running calibration tests when all I had to do was sit it on something sturdy. I also reduced the travel and jerk speeds a bit since they seemed unnecessarily high.

  • @u2cantsee
    @u2cantsee 26 วันที่ผ่านมา +2

    I'm a newbie to world of 3D printing. I've been reading and watching as much TH-cam videos to determine which printer I want to purchase. I'm leaning toward a enclose system to keep the smell down to a minimum and not to worry about temperature control for the open systems. My question is "Would you recommend replacing the nozzle on the Creality K1 or the Creality K1 Max by Microswiss FlowTech Hot end? " So not having to heat the nozzle up to remove it and then replace the nozzle, plus torque it in place so not to leak. That way you can change the nozzle when it is cold. Looks like Microswiss FlowTech Hot end makes it for other manufacturers also.

  • @AndyRC
    @AndyRC 28 วันที่ผ่านมา +2

    I love my k1 and have updated the extruder, hot end, added camera and did a few things like level bed and rooted it. It prints like a dream and paired with Orca it is a beast. I never really cared for creality before and have 3 other printers from other brands. But now my k1 is my go to printer. I have over 1000 hours on it and up to now its been great. We'll except for the exploding door. Lol. But creality was great and is sending me a replacement door and dealing with them was easy. I was surprised. Love these kinds of videos.

    • @blue-steel7177
      @blue-steel7177 26 วันที่ผ่านมา

      my k1 has ringing and vfc. I have replaced the hot end with the micro swiss.

  • @basarix
    @basarix 28 วันที่ผ่านมา +1

    Hey frank....very enlightening piece....should do one for the Bambu PS1/X1C (if you have those machines)....

  • @Antstar12
    @Antstar12 28 วันที่ผ่านมา +2

    Frank are you looking forward to the K2 Plus + CFS? Looks like XL format printer and mutlicolour might be getting a lot more afforable and coming before bambu release their large format printer. Hoping you do a video on those when they release!

  • @bentenerson0833
    @bentenerson0833 28 วันที่ผ่านมา +3

    I love your video!

  • @dezaina9961
    @dezaina9961 28 วันที่ผ่านมา +2

    Another one to add to the collection.

  • @void8240
    @void8240 28 วันที่ผ่านมา +1

    great video, would you ever consider doing a review on the new sv08 from sovol once they get shipped out? looks like a pretty cheap massive core xy printer

  • @acgamingpresents9070
    @acgamingpresents9070 28 วันที่ผ่านมา +11

    1:26 I understood that reference.

    • @RiderManX0
      @RiderManX0 28 วันที่ผ่านมา +2

      Uncle jesse is never going to live that down lol

  • @Mathewadventure
    @Mathewadventure 21 วันที่ผ่านมา +1

    Bro I wish I could meet the man, he is a legend in the 3d printing community

  • @thomaswalker9277
    @thomaswalker9277 28 วันที่ผ่านมา +1

    I was looking at a K1Max as my next printer. But got wind of the K2 Plus coming. So I am waiting to see how that one performs.

  • @viteksmerak5304
    @viteksmerak5304 19 วันที่ผ่านมา +1

    Hey Frank, i have printed an ironman helmet in 110% scale and was wondering if that meant that i should scale the motorization kit to 110%? Since the one part that holds the servo needs to be the right size and what about the holes?

  • @Adurna.
    @Adurna. 27 วันที่ผ่านมา +1

    Hello Frankly built. It’s a great video but I still have a question. Which iron man helmet file did you have in this video. The one from Akira yunning or are you using different files? The files I downloaded are never compatible with motorization wich is very frustrating. Anyways great video like always very informative and nice to watch

  • @hansencustomcreations5355
    @hansencustomcreations5355 28 วันที่ผ่านมา +2

    Hey Frank I just got a k1 max yesterday I was wondering on what your thoughts on putting it on kilpper is if it’s really needed or not ? Awesome video as always 👍👍

    • @exakelgaming
      @exakelgaming 27 วันที่ผ่านมา

      you don't, it already runs on klipper from the factory. all you need to do is root it.

    • @michelvangent3683
      @michelvangent3683 22 วันที่ผ่านมา

      Just root it and do a proper inputshaper. Out of the box it does inputshaper in the x axis and uses that value for the y axis also. I have a k1 since december and i already had the newer extruder in it. Only added the webcam and rooted. After rooting i run the guilloz script to get the input shaper good. The printer is great. Only thinking of changing the pulleys for smaller ones to get rid of the vfa. Already have them just need to put them in the printer 😁

  • @Kdude216
    @Kdude216 26 วันที่ผ่านมา +1

    Frank, question specific to these faster FDM printers. I saw that Creality came out with their new hyper PLA. Do you actually need a different kind of PLA for the faster printing printers?

  • @zahaesli4o209
    @zahaesli4o209 28 วันที่ผ่านมา +1

    Hey Frank! Tell me please how you care about the safety of your garage? Is there any fire system there or something like that? What is the chance of printer ignition? Have you come across this?

  • @danielblackwell5577
    @danielblackwell5577 27 วันที่ผ่านมา

    any chance you can discuss different media for printing? I've been having significant issues with the Sunlu PLA+ White. Even after performing tests to determine temperature and speed.

  • @dia_beast
    @dia_beast 28 วันที่ผ่านมา +1

    You should 3D print Firestorm. It’s a shardblade from The Stormlight Archives

  • @RJcreations3D
    @RJcreations3D 28 วันที่ผ่านมา +1

    Stay awesome Frank

  • @natezarate6004
    @natezarate6004 19 วันที่ผ่านมา

    Hi frank, i am looking to get into 3d printing and i am not sure what types of filaments i will print for the most part but i wanted to get a machine that can print many types so i wont have to upgrade in the future. I have seen the creality k1, k1c and k1 max as being good options however people also say that bamboo lab printers like the p1p, p1s and x1 carbon are better and more intuitive for beginners. I was wondering if you could recommend a printer for someone looking to get into 3d printing that is versatile enough to print tough filaments, comes enclosed or has an option to be enclosed such as the upgrade kit for the p1p, and is easy enough for a beginner to use. Also a plus if the machine has a print bed that is standard and or can be upgraded to use multiple filaments. Thanks!

  • @jasonbell1900
    @jasonbell1900 25 วันที่ผ่านมา +1

    How do these compare to say a Bambu P1S for overall use and quality?

  • @dkev001
    @dkev001 28 วันที่ผ่านมา +1

    My K1C is my dragon printer. I mostly print silk dragons on it.

  • @mrgtoyz
    @mrgtoyz 25 วันที่ผ่านมา +1

    I got two K1 used from a Facebook marketplace seller and one has been great and the other a mess. The seller hadnt tested that one for months and left ABS in the nozzle for all that time. Now its causing issues with the prints because something is happening with the new nozzle and hot end after i had to replace the nozzle and small tube because of the clog.

  • @Apekr
    @Apekr 27 วันที่ผ่านมา +1

    Great Video! I am planning to buy a Creality K1 MAX as my first printer, but I have read that it has a lot of complaints. Do you think it is a good 3D printer?

  • @colincampbell3679
    @colincampbell3679 28 วันที่ผ่านมา +1

    The problem with the K1 or K1 C is the Creality idea that you must only buy their own K1 type Nozzles and that are pricey! You can't buy any nozzle of that type for them only theirs.
    I stick to my Qidi X-Plus-3 thanks, it has a bigger build size and a better system than the K1 or K1 C. And the newer Q1 Pro by Qidi blows any other Core XY out of the water.
    Even better than my Qidi X-Plus-3. any company who makes 3D printers should not only open source the Klipper system their use ( Which Creality did not do on the K1 series )
    until the users moaned at them for not doing it per the Klipper terms and conditions said,
    But any company doing the printers should also make the volcano type nozzles used be ones we all can buy from anyone not just them?
    And I agree that Elegoo's mega sized Orange Storm Giga needs a smaller version around say a 300 square one & 500 square print area core xy as we can't all get the giga one due to the cost?

  • @michaiahledwith5153
    @michaiahledwith5153 23 วันที่ผ่านมา +1

    So is this gonna be the new ender 3 where creality just keeps releasing new versions with slight changes?

  • @conboy28
    @conboy28 26 วันที่ผ่านมา +1

    Hey frank, can you make a katana for inosuke ccddi know you havent made a sword in quiet a while for youtube but i really liked those videos.
    Actually im trying to make my first prop but i have isues to find the right files to print the katana of inosuke and idkhow to make a sheat so im figuring that out rn so im trying to find some tutorials on youtube so i just wanted to ask you if you can make one bc you make one of the best tutorials on youtube keep up the good work :)

  • @Shaerky
    @Shaerky 28 วันที่ผ่านมา +1

    MY IDOL UPLOADED!!

  • @jaypouw2280
    @jaypouw2280 25 วันที่ผ่านมา +1

    Only grip i have with the k1 is the hot end aready have had to replace it twice in 6 months and the same this for the ender 3ve ke

  • @gv100_blitz
    @gv100_blitz 28 วันที่ผ่านมา +3

    It feels like he’s channeling Emily 😂

  • @webnyoung
    @webnyoung 8 วันที่ผ่านมา

    Thank you I was regretting buying the K1 the very next week the K1C came out. I've already bought the camera, replaced the extruder and installed a harden nozzel. SO beside the unicorn nozzel I guess I have a K1C

  • @1hotrod
    @1hotrod 28 วันที่ผ่านมา +1

    I think the main complaint was vfa on the K1...can you print out a test on both to prove what came out?

  • @JustJCCosplay
    @JustJCCosplay 28 วันที่ผ่านมา +1

    K1 Carbon, do you say this off the cuff or write it down, either way that joke got a solid chuckle outta me. Thanks for the info and breakdowns per usual Frank, always look forward to these videos

  • @Brabbs
    @Brabbs 28 วันที่ผ่านมา +1

    What printer is good for printing lego?

  • @jakk-f7586
    @jakk-f7586 20 วันที่ผ่านมา

    can i ask sir frank where did you get your file in devil fruit gomu-gomu?
    and what is the filamen did u use thank u in advanced

  • @VRboyz555
    @VRboyz555 27 วันที่ผ่านมา +1

    is the elegoo nepune 3 pro good

  • @acgamingpresents9070
    @acgamingpresents9070 28 วันที่ผ่านมา +2

    Are you still happy with how the Neptune 3 Max is working for you?

  • @blue-steel7177
    @blue-steel7177 26 วันที่ผ่านมา

    My k1 is okay, I bought in dec and got the original extruder and hot end. I put a 3rd gen extruder and micro swiss hot end. I still get ringing and vfa. So if the k1c has fix that its worth the extra money. Remember the k1c has replaced the pullies

  • @terryfang
    @terryfang 28 วันที่ผ่านมา +1

    Love u Frank

  • @Optikification
    @Optikification 27 วันที่ผ่านมา

    Your table is wobbly ;-)

  • @mattnelson1366
    @mattnelson1366 12 วันที่ผ่านมา

    Great video, miss the outro... but TH-cam knows best. (sigh)

  • @nijaljiggetts4749
    @nijaljiggetts4749 28 วันที่ผ่านมา +1

    So there's the K1, K1C, and K1 Max? I didn't realize there were three. I thought it was just the K1 & K1 Max.

  • @MrRgx
    @MrRgx 28 วันที่ผ่านมา +1

    for a £1000 budget, would you reccomend the creality k1c, max or just go all out for the bambu lab?

    • @FranklyBuilt
      @FranklyBuilt  27 วันที่ผ่านมา +3

      Bambu p1s

    • @MrRgx
      @MrRgx 27 วันที่ผ่านมา

      @@FranklyBuilt thank you!

    • @CMDR.Gonzo.von.Richthofen
      @CMDR.Gonzo.von.Richthofen 9 วันที่ผ่านมา

      ​@@FranklyBuilt I'm REALLY struggling with the same question. Could you please elaborate a little on why?

  • @GarrettGross-ph6sp
    @GarrettGross-ph6sp 23 วันที่ผ่านมา +1

    Can you make the symbiot spider man helmet from do3d please

  • @lucayau6282
    @lucayau6282 28 วันที่ผ่านมา +2

    I just bought a k1 😅

  • @bstephens9819
    @bstephens9819 27 วันที่ผ่านมา

    Unfortunately, I have been really disappointed with my K1 Max. Mine gave up on me after about a month of printing pretty simple things. Still haven’t been able to get it fixed and Creality hasn’t responded to anything I’ve sent. On the other hand, my Bambu Lab P1S I got to replace it has been phenomenal and it has handled much more complicated prints with ease.

  • @lucayau6282
    @lucayau6282 27 วันที่ผ่านมา +1

    1:28 I just broke the door glass,so you gays need to be careful when the door are open 😢

  • @SinkyYT
    @SinkyYT 24 วันที่ผ่านมา +1

    For the small difference in price I'll just get a K1C.

  • @emmanuelskolinos1361
    @emmanuelskolinos1361 7 วันที่ผ่านมา +1

    Can you share with us your slicer

  • @thebeeker9194
    @thebeeker9194 24 วันที่ผ่านมา +1

    Hey Frank I would love it if you would mabey do some (Lord Of The Rings) prints. All I'm asking is that you think about it. Thank you for your time. And God bless you and your family.

  • @Alex-The-Engineer.
    @Alex-The-Engineer. 28 วันที่ผ่านมา +1

    What you should do to see if it is the same printer is to make the gcode for the k1 and put it into the k1c.

    • @FranklyBuilt
      @FranklyBuilt  28 วันที่ผ่านมา +1

      I did. It works fine

  • @KAKAFU
    @KAKAFU 28 วันที่ผ่านมา +1

    I have the K1C in Shopping cart lol

  • @rat600
    @rat600 28 วันที่ผ่านมา +2

    Is the k1 max better than the k1C

    • @FranklyBuilt
      @FranklyBuilt  28 วันที่ผ่านมา +1

      It’s the same but bigger

  • @Andyah
    @Andyah 28 วันที่ผ่านมา +1

    the bed are updated on the k1c..should be better?

    • @FranklyBuilt
      @FranklyBuilt  28 วันที่ผ่านมา

      Same bed

    • @Andyah
      @Andyah 28 วันที่ผ่านมา

      @@FranklyBuilt but the whole design is diffrent..why is that? looks more like the bambu lab..just looks?

  • @mrbigphil22
    @mrbigphil22 27 วันที่ผ่านมา

    hey dude, thanks for the review! the real question is though, k1 or k1 max? haha!

  • @unitedsupreme7979
    @unitedsupreme7979 28 วันที่ผ่านมา +1

    nice

  • @Chrisisthebest28iy
    @Chrisisthebest28iy 28 วันที่ผ่านมา +1

    What did you model in at 7:36

    • @FranklyBuilt
      @FranklyBuilt  28 วันที่ผ่านมา

      TinkerCAD

    • @Chrisisthebest28iy
      @Chrisisthebest28iy 23 วันที่ผ่านมา

      You should do a video on the basics on 3d modeling

  • @xRaptorScreamx
    @xRaptorScreamx 28 วันที่ผ่านมา +1

    ... or get a Qidi printer, if exterior design isnt a major factor

  • @Skott62
    @Skott62 28 วันที่ผ่านมา +1

    Now Creality needs to make this printer with a 325mm x 325mm x 350mm build.

    • @leeball4
      @leeball4 28 วันที่ผ่านมา +1

      K2 Plus coming soon, 350x350x350 with multicolor system

    • @Skott62
      @Skott62 28 วันที่ผ่านมา

      @@leeball4 Oh! Sweet!

    • @petercallison5765
      @petercallison5765 13 วันที่ผ่านมา

      @@leeball4 Thanks I have never seen a mention of the size. Custom dictates that a Max model is bigger than a Plus model. I feel that Creality is just messing with us now.

  • @yadascht513
    @yadascht513 26 วันที่ผ่านมา

    Next try. Pleaassseeee we need a ironman Video 😢

  • @seekertosecrets
    @seekertosecrets 27 วันที่ผ่านมา

    Wait, on the music or the content?

  • @danielmills3945
    @danielmills3945 26 วันที่ผ่านมา +1

    Have you had any issues with ghosting on any of the K1 series printers? My K1 Max has crazy ghosting problems and Creality customer service has been as useful as a poo flavored lollypop...
    I've adjusted belt tension, cleaned the gantries, and rooted the printer and still get bad ghosting...

    • @petercallison5765
      @petercallison5765 13 วันที่ผ่านมา

      Root klipper and you will get better input shaping.

    • @danielmills3945
      @danielmills3945 12 วันที่ผ่านมา

      @@petercallison5765 I did that and still get really bad ghosting... it's like my input shaper just doesn't work in one axis

  • @dakonx7049
    @dakonx7049 28 วันที่ผ่านมา +1

    Thats pretty much the same as X1C and P1S (yes, i do know about the better screen and the lidar but stay with me): you wanna print carbon fiber? Get the p1s and spend an extra 40 bucks for the all hardened steel extruder

    • @FranklyBuilt
      @FranklyBuilt  28 วันที่ผ่านมา +1

      Agreed

    • @dakonx7049
      @dakonx7049 28 วันที่ผ่านมา

      Glad to hear 🦾

  • @army310
    @army310 27 วันที่ผ่านมา

    I just bought a k1 max from amazon last week and I got a v1 extruder..... Just found out that is bad

    • @petercallison5765
      @petercallison5765 13 วันที่ผ่านมา

      Contact Creality and they may send a new, particularly if you say it isn't printing properly.

  • @Buddasticks
    @Buddasticks 28 วันที่ผ่านมา +1

    its got different sized motor pulleys

  • @envt
    @envt 27 วันที่ผ่านมา +1

    K2c?

  • @normanbarud
    @normanbarud 16 วันที่ผ่านมา +1

    K1 max or elegoo max 3

    • @petercallison5765
      @petercallison5765 13 วันที่ผ่านมา +1

      They are very different machines, but if you go with Elegoo then get the Neptune 4 Max.

  • @noxin75
    @noxin75 28 วันที่ผ่านมา +1

    Neither, wait until the K1 Neo Plus Pro is released. Creality's standard operating system is to release junk for 3 to 5 iterations of the product line.

    • @FranklyBuilt
      @FranklyBuilt  28 วันที่ผ่านมา +1

      You’re not wrong lol

    • @my63stingray
      @my63stingray 28 วันที่ผ่านมา

      In my experience they just release junk for all iterations making small changes but never fixing the printer completely. Then a year later the new iterations start coming out.

    • @petercallison5765
      @petercallison5765 13 วันที่ผ่านมา

      @@FranklyBuilt It creates plenty of work for reviewers.

  • @nhahtrebor91
    @nhahtrebor91 27 วันที่ผ่านมา +1

    Get the max, next question.

    • @FranklyBuilt
      @FranklyBuilt  27 วันที่ผ่านมา +1

      Not really? Lol it’s almost triple the price at times lol

    • @nhahtrebor91
      @nhahtrebor91 27 วันที่ผ่านมา

      @@FranklyBuilt Wow really for me there's only a few hundred difference, which is alot of money to be sure but alot more build volume.
      I'm biased ofc cause I want either the bigger volume, or the AMS from the P1.

    • @petercallison5765
      @petercallison5765 13 วันที่ผ่านมา

      @@FranklyBuilt Unlike Bambu you can get very big discounts on Creality printers.

  • @seanvoysey8360
    @seanvoysey8360 28 วันที่ผ่านมา +1

    Can’t you just put a better nozzle on the K1 max and get all the benefits of the K1c?

  • @user-ie9vl3lj2r
    @user-ie9vl3lj2r 28 วันที่ผ่านมา +1

    noice

  • @D_studdios
    @D_studdios 27 วันที่ผ่านมา +1

    every like is one simpsons episode i watch

  • @eyal_the_goat
    @eyal_the_goat 28 วันที่ผ่านมา +1

    Second

  • @mikesbasement6954
    @mikesbasement6954 27 วันที่ผ่านมา

    Neither. They are made by Creality and therefore are the lowest quality one can possibly buy.

    • @astrophysicistguy
      @astrophysicistguy 27 วันที่ผ่านมา

      Yeah, probably should just buy a PRUSA ... lol

    • @FranklyBuilt
      @FranklyBuilt  27 วันที่ผ่านมา

      Yeah that’s not true anymore. At all lol

    • @FranklyBuilt
      @FranklyBuilt  27 วันที่ผ่านมา

      I mean yeah if you want to waste money

    • @astrophysicistguy
      @astrophysicistguy 27 วันที่ผ่านมา

      @@FranklyBuilt do your have one? i do and it blows the socks off anything my maker friends have. While they are tinkering to no end doing upgrades and constantly tweaking I just send prints to teh machine & it cranks them out. And the 5 head machine is miles above other versions of 'multi filament' machines. Filament changes take less than 3 secs with no waste filament. And the 360 x 360 x 360 print volume is a cosplayer's dream. I get that most can't afford this machine but they really a cut above the rest. It's l;Ike saying a Honda and a BMW are both cars so it doesn't matter which one you get but if you've ever driven or owned a BMW you understand there is a difference. Ever notice how many YTers who have print frames are running PRUSAs. Even Adam Savage is running PRUSAs -- there's a hint in there somewhere ... lol

    • @mrPurplexedYT
      @mrPurplexedYT 25 วันที่ผ่านมา

      ​@@astrophysicistguy you clearly don't understand the target audience of this channel or the purpose of Frank's videos. He knows PRUSA's are great, they are just overkill or way too expensive for the size and things people who watch his videos want to print

  • @crazzzyization
    @crazzzyization 15 วันที่ผ่านมา +1

    pedaras