Some of my subscribers hit the dislike button too fast, the poor man will be outraged because I no longer upload Euro Truck Simulator 2 mods , I have a few more with that problem with me, NOOBS 🤣🤣🤣🤣
⚠⚠⚠⚠⚠⚠⚠⚠⚠ WARNING ❗❗❗❗❗❗❗❗❗❗ I decided to redo the engine of my Venox to obtain extra reliability and some power, but I have had surprises that in the end has become a serious repair, so I have it in the operating room, the problems are the following: - Camshaft bearings out of tolerance - Crankshaft bearings protrude above block, causing excessive crankshaft clearance. - Excessive crankshaft axial clearance. - Rusty water pump and liners. - Excessive clutch bell clearance. - Worn rear piston (the cylinders are perfect, they still have the machining marks) - Head threads somewhat damaged. Some things I already have solved, others I'm working on it! These are things that happen when you buy a used bike/car, everything may seem fine, until one day you open the engine to improve it and find the lack of maintenance that the previous owners made.
Don't buy a venox, when buying second-hand spare parts you only find things in poor condition due to lack of maintenance and with scratches in important areas such as the cylinder head plane, camshafts bearings clearances due to lack of lubrication, and sometimes cracks in the rear cylinder head support due to accidents.. I tell you from experience, I love this engine, but it's something to keep in mind, I'm currently rebuilding my engine to make it as perfect as possible, it cost me a lot to find 2 cylinder heads in good condition, and still had to skim and adjust cam bearings 🤣🤣🤣🤣🤣🤣🤣🤣
@@Alexa_SuperSprint620R well thats to be expected kinda, at the end its not a yamah or honda that is widely known, and i have some experience with machining this stuff, boring out cylinder head ports and all that so that wouldnt be an issue really
@@szypki_zygi For example, you can buy new cylinder heads and camshafts on Aliexpress for the Yamaha Virago 250, it's something that I love about that bike, and that is missing in the Kymco 😭😭 Soon I will upload a video rebuilding the engine of my Venox with new pistons, mirror finish exhaust ports, modified oil pump, polished cams, inox cylinder head threads, all gaskets, 0.10mm head skimming, remove carbon, oil circuit cleaning, conrod bearings.... I'm still waiting for the gearbox seal and crankshaft bearings to arrive from Taiwan 🤔🤔🤔🤔 My unit suffered overheating with its previous owner due to rust in the radiator and poor oil maintenance, this is very common in these bikes because their owners don't love them as much as other more expensive bikes.... cylinder, piston rings, camshaft lobes & rockers are perfect after almost 30,000km and a lot of abuse, almost like new, that's why I think it's a strong engine 😄😄 If you are going to buy one, I recommend that you do the same as me, and you will have a new and reliable engine, don't trust units with unknown maintenance, avoid them! 😁😁😁😁
@@t.k.7719 Starter REF: 31210-KED9-90 (You can find on Google, Ebay,... some dealers) www.ebay.es/itm/255340267300?hash=item3b73774724:g:EMsAAOSwv4xfrXcd In general, the gearbox is not changed entirely, only the broken or out-of-tolerance parts, have you identified the problem?
Con un poco más de práctica se puede alcanzar los 100kmh en 9 segundo o algo así. Está muy bien por una moto 250cc pesada. ¿Qué opinas, debo comprar una para usar todos los días? No hay autopistas en mi país, solamente bypass.
What's your country? In Spain this is the best site to buy, includes schematics and all reference numbers of any component, available for all countries according to what it says on the page ➡ partsss.com/kymco/recambios/custom/venox-250/ra50ac/pid24314.html
Venox full engine rebuild video: th-cam.com/video/NyqgySumo58/w-d-xo.html
Some of my subscribers hit the dislike button too fast, the poor man will be outraged because I no longer upload Euro Truck Simulator 2 mods
, I have a few more with that problem with me, NOOBS
🤣🤣🤣🤣
Para mí, la mejor Custom de 250cc.
Buen vídeo 👍👍
Awesome video thanks 😊
⚠⚠⚠⚠⚠⚠⚠⚠⚠ WARNING ❗❗❗❗❗❗❗❗❗❗
I decided to redo the engine of my Venox to obtain extra reliability and some power, but I have had surprises that in the end has become a serious repair, so I have it in the operating room, the problems are the following:
- Camshaft bearings out of tolerance
- Crankshaft bearings protrude above block, causing excessive crankshaft clearance.
- Excessive crankshaft axial clearance.
- Rusty water pump and liners.
- Excessive clutch bell clearance.
- Worn rear piston (the cylinders are perfect, they still have the machining marks)
- Head threads somewhat damaged.
Some things I already have solved, others I'm working on it!
These are things that happen when you buy a used bike/car, everything may seem fine, until one day you open the engine to improve it and find the lack of maintenance that the previous owners made.
Venox full engine rebuild video: th-cam.com/video/NyqgySumo58/w-d-xo.html
Эх, хорошо!
it has some pep for a 250, maybe i should get one beside my gixxer? :) before suzi i had kymco so i like the brand
Don't buy a venox, when buying second-hand spare parts you only find things in poor condition due to lack of maintenance and with scratches in important areas such as the cylinder head plane, camshafts bearings clearances due to lack of lubrication, and sometimes cracks in the rear cylinder head support due to accidents..
I tell you from experience, I love this engine, but it's something to keep in mind, I'm currently rebuilding my engine to make it as perfect as possible, it cost me a lot to find 2 cylinder heads in good condition, and still had to skim and adjust cam bearings 🤣🤣🤣🤣🤣🤣🤣🤣
@@Alexa_SuperSprint620R well thats to be expected kinda, at the end its not a yamah or honda that is widely known, and i have some experience with machining this stuff, boring out cylinder head ports and all that so that wouldnt be an issue really
@@szypki_zygi For example, you can buy new cylinder heads and camshafts on Aliexpress for the Yamaha Virago 250, it's something that I love about that bike, and that is missing in the Kymco 😭😭
Soon I will upload a video rebuilding the engine of my Venox with new pistons, mirror finish exhaust ports, modified oil pump, polished cams, inox cylinder head threads, all gaskets, 0.10mm head skimming, remove carbon, oil circuit cleaning, conrod bearings.... I'm still waiting for the gearbox seal and crankshaft bearings to arrive from Taiwan 🤔🤔🤔🤔
My unit suffered overheating with its previous owner due to rust in the radiator and poor oil maintenance, this is very common in these bikes because their owners don't love them as much as other more expensive bikes.... cylinder, piston rings, camshaft lobes & rockers are perfect after almost 30,000km and a lot of abuse, almost like new, that's why I think it's a strong engine 😄😄
If you are going to buy one, I recommend that you do the same as me, and you will have a new and reliable engine, don't trust units with unknown maintenance, avoid them! 😁😁😁😁
Hello, there are not many parts of this engine in turkey, is there a site where i can find it or a few foreign sites
Tell me what you need, I will look for the references and check possible stock 🤔🤔
@@Alexa_SuperSprint620R thank you for your attention my friend , I need starter motor and gearbox
@@t.k.7719 Starter REF: 31210-KED9-90
(You can find on Google, Ebay,... some dealers) www.ebay.es/itm/255340267300?hash=item3b73774724:g:EMsAAOSwv4xfrXcd
In general, the gearbox is not changed entirely, only the broken or out-of-tolerance parts, have you identified the problem?
PS: It's rare that the starter does not work, it's probably a Bendix problem... (a cheaper repair than changing the starter)
Con un poco más de práctica se puede alcanzar los 100kmh en 9 segundo o algo así. Está muy bien por una moto 250cc pesada. ¿Qué opinas, debo comprar una para usar todos los días? No hay autopistas en mi país, solamente bypass.
Si es de carburación y está en buen estado, si! 😁
@Antonio GR Si, evítalas 😀 Siempre carburador! 😁😁
What happened to Your Suzuki Gsxr?
Sleeping in the garage
🤣 my back prefers a custom bike right now
😁😭
@@Alexa_SuperSprint620R have a nice sleep to Gixxer 😂
@@muratcanozbek 🤣🤣🤣🤣🤣🤣
@@Alexa_SuperSprint620R köksal baba'nın sana selamı var 😂
Whered you get that Speedo in black?
It's the original from 2006 model 😄
I like venox to much but spare parts are problem in my country :( i dont buy because of it
What's your country? In Spain this is the best site to buy, includes schematics and all reference numbers of any component, available for all countries according to what it says on the page ➡ partsss.com/kymco/recambios/custom/venox-250/ra50ac/pid24314.html
@@Alexa_SuperSprint620R Turkey
Ne aldın peki
@@Troohinus u can use parts from Honda rebel 250 :)
Tiene el escape libre?
Lleva arandelas entre los Db Killers, tres por remache para ser exacto 😁
How tall are you?
70'' 😄
Top speed??
140km/h 🤔
155 kmh
I apologize for Taiwan, we sell these wackass bikes.