How to change fuel filter on Audi A6 Diesel 2016

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ส.ค. 2024

ความคิดเห็น • 19

  • @ryanh3285
    @ryanh3285 ปีที่แล้ว +4

    Definitely best to prime the filter and pump before starting with vcds ,obd eleven or manually but good video

  • @sorinmedrea4201
    @sorinmedrea4201 2 ปีที่แล้ว +2

    Thanks for you video!!👍

  • @Cll859
    @Cll859 ปีที่แล้ว

    Do bmw f10 have automatic bleeding ? On and Off ignition after replacing

  • @peterchajewski8065
    @peterchajewski8065 3 ปีที่แล้ว +3

    You dont need to bleed the fuel system? It automaticly?

    • @hotstonemedia376
      @hotstonemedia376  3 ปีที่แล้ว +1

      Yes. The lift pump will pump the fuel for 3 seconds as soon as you turn on the ignition and will continue to pump while the engine is running.

  • @saltyorange100
    @saltyorange100 3 หลายเดือนก่อน

    Do you need to close a valve for the fuel anywhere? Or does it not drain the fuel tank when you remove the filter?

    • @hotstonemedia376
      @hotstonemedia376  3 หลายเดือนก่อน

      As long as everything is switched off and the key is not in the ignition or engine is not running then the tank won't drain out.

  • @louiswitt1019
    @louiswitt1019 2 ปีที่แล้ว +2

    Did you have a operating condition or sputtering that required the filter change?

    • @hotstonemedia376
      @hotstonemedia376  2 ปีที่แล้ว +2

      Fuel filter is a service part that you suppose to replace as maintenance. Best to replace it once every 2-3 years in order to keep the fuel system clean if your here in the UK. If your in other countries where the fuel is not as clean then you may have to replace it more often.

    • @louiswitt1019
      @louiswitt1019 2 ปีที่แล้ว +1

      @@hotstonemedia376 Thank you for the reply!

  • @66Pipes66
    @66Pipes66 2 ปีที่แล้ว +4

    This is wrong. You must bleed the system or you could damage the high pressure fuel pump because you ran it dry.

    • @hotstonemedia376
      @hotstonemedia376  2 ปีที่แล้ว

      Your comment applies to vehicles that don't have a lift pump. This vehicle has a lft pump in the fuel tank.

  • @petricfabian3684
    @petricfabian3684 ปีที่แล้ว

    Hey, i have an audi a4 b8 2011 how do i know my car have an automatic pump ?

    • @hotstonemedia376
      @hotstonemedia376  ปีที่แล้ว +1

      You should be able to hear the sound of fuel flow in the filter for few seconds when the ignition is switched on and engine is not running.

  • @A1948C
    @A1948C 4 หลายเดือนก่อน

    Use hose clamp pliers on hose and use vcds to take the air out of the filter and just then fit the filter and take the clamps out of the tubes. That's so wrong how you did it...

  • @davidredmond1982000
    @davidredmond1982000 ปีที่แล้ว +2

    100% wrong, took a big chance without bleeding the fuel system, just because time car started doesn't mean you won't do damage, high pressure pump run dry is a costly mistake

    • @hotstonemedia376
      @hotstonemedia376  ปีที่แล้ว +3

      You are 100% right when it comes to vehicles without automatic bleeding. You are 100% right about causing damage to high pressure pump if run dry this is why you have to prime the system by turning the ignition on & off before starting the engine on vehicles with automatic bleeding. And this vehicle has automatic bleeding. Therefore you have 100% wrong ly misunderstood the video and all the previous messages.

    • @IIIIIIPETEIIIIII
      @IIIIIIPETEIIIIII 6 หลายเดือนก่อน +1

      @@hotstonemedia376so by cycling the ignition key, the system automatically primes? How many times do you need to do this to refill the system and purge all of the air?

  • @jusko111
    @jusko111 ปีที่แล้ว

    Goood