Thank u so much. As a woman I found this easy enough to take off and out on. Only cost £36 in today's prices, an absolute bargain. Garages were charging me up to £60 a wing mirror to fix and MOT due next week. Thank you so much 😃😃
Thanks a lot for this short, to the point video. I replaced both indicators in 5 minutes (unsing the Bison dynamic 28-LED replacement, which is infinitely better than the weak 3 LED original)! Most importantly, I did not break anything! Big hug, Paul!
Thank you so much for this video, best one on here for this particular job. I followed your instructions - both indicators done in less than 20 minutes, and you saved me a bundle! Thanks again!👍
Mate you are a total legend after some m0r0n in a van hit it and denied he was at fault when cutting the corner. I've replaced the casing on my one from an old faulty mirror the same colour and its as good as new. Thanks once again and you've got a new sub :)
I just ordered the LED replacement part, then I'll try to follow your method. Thanks! I saved about 100GBP compared to what official Honda shop asked me :-)
Nice one many thanks, a job ive got to tackle this year before the MOT. Do you know if the replacement parts are handed for a particular side or do the just flip upside down?
Seems easier and less fiddly then taking the mirror out and pry with screwdrivers in holes to unclip, but also less possible to break tabs with the brute force I saw from someone i saw replacing SOD's
TBH, you are better off taking the mirror out so you can undo/move the clips with a flat head screw driver. Forcing it the above video way you may break your clips and then you will need a new cover. Taking the mirror out only takes seconds. Also if you have not got the little tool a credit/plastic card is fine to get underneath.
You are removing the cover wrong. !. 1. remove mirror glass my lifting up from the bottom of the glass and pull glass out, mirror glass will unclip. 2. Access to the clips is now easily accessible release clips using pointy nose pliers and the back cover will come off with no damage and no risk of cracking or scratching.
Just cracked my nearside indicator as some idiot in an SUV thought they'd be able to fit past two parked cars and mine on a narrow road. Looked up on forums and they all said pull off the mirror glass and fiddle around trying to undo the clips. Much easier this way with a trim removal tool! Any idea what size the torx screws are and what grease did you use? Thanks!
Chris Loftus Hi Chris, sorry I can't remember what torx size. Just buy a set it's good practice to have them ready. The grease, any grease will do as it's not near any heat, etc
DONT FOLLOW THIS you will damage the clips, you remove the mirror glass it just pulls off, then you can pop the clips from the inside with no damage. this creator shouldn't have made this video it will damage you mirror cap.
The safest and easiest way to do it rather than yanking it like other instructional videos. Thanks for this!
The best instructions for this job. Well done and thank you
Thank you for posting this video! Halfords Autocentre quoted me £110 for this part and job! I did it in 5minutes 😁
This is also the easiest way to replace the mirror cover which I had to do. Thank you Paul
Thank u so much. As a woman I found this easy enough to take off and out on. Only cost £36 in today's prices, an absolute bargain. Garages were charging me up to £60 a wing mirror to fix and MOT due next week. Thank you so much 😃😃
Thanks a lot for this short, to the point video. I replaced both indicators in 5 minutes (unsing the Bison dynamic 28-LED replacement, which is infinitely better than the weak 3 LED original)! Most importantly, I did not break anything! Big hug, Paul!
A great video, I bought replacements from The Wing Mirror Company and had both replaced in under 30 minutes. Thanks Paul!!!!
Thank you so much for this video, best one on here for this particular job. I followed your instructions - both indicators done in less than 20 minutes, and you saved me a bundle! Thanks again!👍
New to honda, seen some dynamic black indicators on ebay. So time to upgrade. THANK YOU.
thanks for this - saved me a packet today as quoted by a garage and the replacement LED part was only £20 on ebay as well. Result!
DoctorBamberSTFC mate what honda do you have?
catalingaga 2008 civic hatch.
Thank-You. New indicator mod done in 15 mins. Perfect 👍👍👊👊
Nice one mate nice easy job swapping out the oe ones for tinted dynamic ones 👍
Much clearer than the Haynes manual I have and it only cost me £20. Thanks!
Very informative video, you just saved me from buying a complete mirror 👍
Mate you are a total legend after some m0r0n in a van hit it and denied he was at fault when cutting the corner. I've replaced the casing on my one from an old faulty mirror the same colour and its as good as new. Thanks once again and you've got a new sub :)
Haynes manual says "remove the mirror glass first"😂😂😂😂
Surprised that the book didn't say "remove the rear seats"...😂😂😂
I just ordered the LED replacement part, then I'll try to follow your method. Thanks!
I saved about 100GBP compared to what official Honda shop asked me :-)
Thanks soo much just changed my repeaters to Ali express specials :)
Brilliant thanks. Lovely accent, you should get a job presenting on Top Gear!
Thank u soo much..
For your kind information
Thanks, very useful as mine needs to be replaced
Thanks a lot it's easy when you know how,other methods on YT are too much work.. or impossible without breaking something..
John Smith thanks for the comment
Very helpful well done thanks for posting 👍
Nice one many thanks, a job ive got to tackle this year before the MOT. Do you know if the replacement parts are handed for a particular side or do the just flip upside down?
This has just saved me a load of money you are a hero. Am@z0n selling spare parts now for 27 quid, needed two
Seems easier and less fiddly then taking the mirror out and pry with screwdrivers in holes to unclip, but also less possible to break tabs with the brute force I saw from someone i saw replacing SOD's
TBH, you are better off taking the mirror out so you can undo/move the clips with a flat head screw driver.
Forcing it the above video way you may break your clips and then you will need a new cover.
Taking the mirror out only takes seconds. Also if you have not got the little tool a credit/plastic card is fine to get underneath.
You are removing the cover wrong. !. 1. remove mirror glass my lifting up from the bottom of the glass and pull glass out, mirror glass will unclip. 2. Access to the clips is now easily accessible release clips using pointy nose pliers and the back cover will come off with no damage and no risk of cracking or scratching.
Thank you brother, stay safe
Just cracked my nearside indicator as some idiot in an SUV thought they'd be able to fit past two parked cars and mine on a narrow road. Looked up on forums and they all said pull off the mirror glass and fiddle around trying to undo the clips. Much easier this way with a trim removal tool! Any idea what size the torx screws are and what grease did you use? Thanks!
Chris Loftus
Hi Chris, sorry I can't remember what torx size. Just buy a set it's good practice to have them ready.
The grease, any grease will do as it's not near any heat, etc
Did some digging and it's a T20. Just bought a torx set off eBay. Cool, thanks!
Hope you like my video
thx for the video man.
Where did you get the part from?
Hey Paul I need to buy one pair of this item
Please help n mail imtiazabdul@hotmail.com
I have to do the same on my 2013 Honda jazz is it the same procedure
Hey what’s up u have a video how to install the led mirrors to the car thanks
does this work for USDM models
DONT FOLLOW THIS you will damage the clips, you remove the mirror glass it just pulls off, then you can pop the clips from the inside with no damage. this creator shouldn't have made this video it will damage you mirror cap.
What size torque spanner to take off the internal torque screws?
Many thanks
Where can you find this replacement part for cheap on ebay??? Plz post a link somenone...
is this the same process on honda city 09?
Is there a specific bulb type?
What is the name of that very handy yellow plastic tool mate?
Auto Trim Removal Tool, you will usually find them in sets
it is the same on honda civic sedan?
So there is no light bulb you can change??Good video btw👍
Cliff Lackovic .....Hi, no light bulb as it's a sealed unit. There are original replacements as well as pattern copies available on internet