Hi, what differences in install would there be between the LC and the GX550 Overtrail+? I just got the GX. Also, does the rack have good clearance at the rear for the radio fin that sticks up? I assume so, just checking. Finally, my garage door is tight! from the roof how high is the top of the rack. I need to measure. The GX550OT+ factory rails clear with a couple inches to spare so I'm pretty sure your roof rack will as well. Thank you,
Question: the t slots on the racks don’t seem to have a wider indentation to put on T-slot mounts. So how do you put t slot mounts on the cross bars? Take the bar off, slide in the mount, and then put them back on?
I’d guess removing the 2 end bolts and slighting lifting would make quick work of this. Agree, would be nice to the openings on the end to slide bolts in without removing cross bar mount bolts.
Looks good, but those spacers where the rack sits look a little questionable. Maybe a single plastic block spacer would inspire some more confidence as far as durability goes.
@@OceansideCreations the crazy thing is we machine the spacers from a solid billet piece of round stock. Sad thing is the spacer holds more weight than the roof. The roof rack holds more weight than the roof as well.
Are there no cutouts in the T-slots to drop/slide studs and nuts in? I'm hoping this video was based on a prototype version? It would be good to know what size extrusion you're using as well so we can order matching T-slot hardware for mounting our RTTs and other accessories. Thanks
@@n1tr0kt we use the same size cross bars as Prinsu and Sherpa. We all use a 47” long bar that is 2” x 1” and they use a 1/4-20 T nut. They can be bought on mcmastercarr.com they make ones that just drop into the bars that lock into place. And to answer your questions. This is a production roof rack.
I love the rack but you should of tried the bottle opener on the LC because it don't work I've called several times to ask why but still no response. Wrong angle four sure. Looks nice just non effective. I live in Peoria right down the street.
@@linework11 I will look into it and see. Thank you for letting me know. You can always call me direct on my cell phone. They phone rings off the hook🤦♂️. Call me any time. Thanks again, Jeff Westcott 480-703-2440
I brought up the concern because the clamps on roof top carriers need space between the traditional bars and this multi-bar setup can prevent the space needed - I would like to see this validated before purchasing- thanks
@@dkdjszudbdiiusushajjjaauu2644 the front visor is designed to sit on the roof in the front to keep air from getting underneath it. It has a rubber strip on it to prevent it from scratching the paint.
Your videos are better than half the shows out there! Nicely done. Westcott Designs never misses!
@@EdgarRuiz thank you! We are trying to do a better job ever day. So thank you for noticing🙏
Niiiiiiice. Can you share the wheel size/offset and tire size? love that setup... Also, will you be offering a cutout for a 40" light bar?
Do you folks plan on making a 3/4 rack or basket style rack for the LC?
Nice work guys, looking forward to more mods for my LC from you guys.
Please make a short version 🙏would be perfect for sunroof + 60" side opening RTT
When will a wine bottle opener version be available?
Hi, what differences in install would there be between the LC and the GX550 Overtrail+? I just got the GX. Also, does the rack have good clearance at the rear for the radio fin that sticks up? I assume so, just checking. Finally, my garage door is tight! from the roof how high is the top of the rack. I need to measure. The GX550OT+ factory rails clear with a couple inches to spare so I'm pretty sure your roof rack will as well.
Thank you,
Question: the t slots on the racks don’t seem to have a wider indentation to put on T-slot mounts. So how do you put t slot mounts on the cross bars? Take the bar off, slide in the mount, and then put them back on?
I’d guess removing the 2 end bolts and slighting lifting would make quick work of this. Agree, would be nice to the openings on the end to slide bolts in without removing cross bar mount bolts.
Looks good, but those spacers where the rack sits look a little questionable. Maybe a single plastic block spacer would inspire some more confidence as far as durability goes.
@@OceansideCreations the crazy thing is we machine the spacers from a solid billet piece of round stock. Sad thing is the spacer holds more weight than the roof. The roof rack holds more weight than the roof as well.
@@westcottdesigns nice well that is good to know
@@westcottdesigns What's the weight limit on the roof with your rack installed?
Are there no cutouts in the T-slots to drop/slide studs and nuts in? I'm hoping this video was based on a prototype version?
It would be good to know what size extrusion you're using as well so we can order matching T-slot hardware for mounting our RTTs and other accessories. Thanks
@@n1tr0kt we use the same size cross bars as Prinsu and Sherpa. We all use a 47” long bar that is 2” x 1” and they use a 1/4-20 T nut. They can be bought on mcmastercarr.com they make ones that just drop into the bars that lock into place. And to answer your questions. This is a production roof rack.
I love the rack but you should of tried the bottle opener on the LC because it don't work I've called several times to ask why but still no response. Wrong angle four sure. Looks nice just non effective. I live in Peoria right down the street.
@@linework11 I will look into it and see. Thank you for letting me know. You can always call me direct on my cell phone. They phone rings off the hook🤦♂️. Call me any time.
Thanks again,
Jeff Westcott
480-703-2440
Can you put a Thule carrier on this rack with all the cross bars?
@@brianhumphrey8494 you could👍
I brought up the concern because the clamps on roof top carriers need space between the traditional bars and this multi-bar setup can prevent the space needed - I would like to see this validated before purchasing- thanks
How long start to finish on building/installing this?
@@samuelgatton you can do in within 2 to 3 hour. 2 people a hour in a half.
@@westcottdesigns Tysm!
Does the Rack Touch the paint somewhere on the roof?
@@dkdjszudbdiiusushajjjaauu2644 the front visor is designed to sit on the roof in the front to keep air from getting underneath it. It has a rubber strip on it to prevent it from scratching the paint.
perfect