Thanks for the video. I have an XMEYE NVR with 16 IP cams connected to a 16-channel PoE. Occasionally, some 8 cameras go offline (no link on the NVR screen) and I have to switch all the appliances (NVR and PoE switch) off and on again to see all cameras. What could be the issue - is it IP related?
What's the software for hikvision on both pc and mac. Can you tell me, can you provide links to download? I want to have the software to view cameras on both pc and mac.
Thanks for this great tutorial. But I was wondering, what would be the step if we use a wireless camera/hikvision or not/ instead of the Dahua. Do we connect the wireless camera to a wireless access point and then to the NVR? or is there another way?
I use wireless bridges to extend the network the NVR is on. For instance, if I have a detached garage. I put a bridge on the house that is connected to the same router or modem as the NVR. Then, at the garage, I plug the receiving bridge into a PoE switch with a couple of cameras and manually add them to the NVR. It doesn't matter if it is a Hikvision or Dahua camera.
I am replacing an 8 channel Hikvision NVR with a new 16 channel Hikvision NVR. When I go through the set up process using the wizard, I cannot get the new NVR to see the existing 8 cameras that were used on the older NVR. Any recommendations?
@@WentworthCCTV that answers my question. I was referring to the order in which I wire my ethernet cable from NVR to the cameras. If say I cross those wires and DC current goes in the wrong way into the camera ethernet port. Thanks!
i still cant figure this out because i have hik vision thermal bullet heat camera nvr style model ds-2td2117-3/v1 no recorder the pc wont accept the tiny disc the camera is discontinued so i cant get help. i dont know what numbers to do where on mine you did the numbers for dahua. can you do one for hikvision only that is either net to connect? i only have a day or so left before i have to ship it back so i dont lose the $500.00 i had to spend for a camera that wont work for me. what number would i need to use type in the ip to get in my camera?
Have you downloaded the SADP tool to locate the camera? Use that and log into the IP address it gives you. You download it from Hikvision website, those disks stink. th-cam.com/video/WW9HL4hPUsg/w-d-xo.html
Absolutely. Just hardwire each IP camera to the series of PoE switches. You daisy chain or loop the switches together using the uplink port. At the end, one of the PoE switches must be plugged into the same router and the NVR and you just network everything together.
Hi, I'm hoping you can help, I'm desperate. I have a bunch of analog cctv cameras I have removed from a store. I have run a coaxial cable (power to psu, twist cable to dvr) both to the cameras. Some camera models work and some models do not. I'm literally moving the 2 cables from a working camera to a different camera and it shows no video. I would assume its because the camera is broken, but I've tried 6 cameras from the shop and they all show no signal. Yet 4 are showing an image. Most are hikvision cameras but slightly different models. All poc. Thank-you in advance!
What manufacturer/ model number is the DVR and what kind of cameras are you trying to connect to it. Some older cameras are 24V not 12V. If you are using a 12V power supply, that may be the issue. Also, if the recorder is old and D1 and the cameras are AHD, that wont work either. It really is impossible to help unless you give the DVR and camera specs.
can i connect a panasonic ip camera (ethernet )directly to my internet providers smart modem ? it has a LAN port. do i just need open/or port forward? thanks
What's the software for hikvision on both pc and mac. Can you tell me, can you provide links to download? I want to have the software to view cameras on both pc and mac.
Thx for this great video. I followed every step to try to connect to my laview r18 (I have 3 of them). When I type their IP on my browser (ms edge). I got the message 'refused to connect". They work great on my cell phone though. Any clue?
I’m trying to setup remote view offsite but the stream only runs for about 5 mins and then I have hit play again to have it play. I tried multiple things but nothing seems to be working. Any suggestions or videos on how to fix this. I’m using guarding vision for viewing for desktop view.
hi, can you explain the camera it is working till i have broadband internet, once i unplug cable from computer, it stop revording, not even letting view video on my phone, or if plug still in computer, but turn off broadband router, it stopped working camera, so camera will work only if i have broadband internet? without internet - i need NVR box recoder correct? any explanation will help me, i want instal in my car on the roof. with second battery. thank you
I need to find someone who can really go into detail on the topology of Hikvision setup. Can both sides of the NVR (LAN and Cameras) be set to the same IP address range? My router is set to 192.168.3. xxx and the NVR LAN side is set to 192.168.3.10 but when I set cameras to 192.168.3.21 and 192.168.3.23 and the Internal NIC to 192.168.3.20 I get an error message "IP Address Conflict". But setting the cameras to 192.168.3.xx is the only way they are visible in ivms4200. When I set cameras and Internal NIC address to 192.168.4.xxx I don't get an error message but the cameras are not visible in ivms4200.
Boring, matching brands and doing the automatic construction will work but how do I know it’s not visible to everyone in China and everyone with a flipper zero?
I'm having problems my reolink Rlc-520 camera accessing remort location canera connecting with poe switch if i stay same wifi i can connected my camera but when i'm not i can't connected my any solutions from you please
Good information. But just confusing when u talk about other brands . In my option as frist time setup up for me is confusing and keeps going off the set up track. I dont want to make life hard and add different brand cameras. How did you even find out how to login to make it work. I am lost in space now. Can you do just a step-by-step using Hikvison and how to make it secure. Is there a app. Thanks
@@justhereforthetakeoff6041 It would depend on the model of the camera, but we made a video on the process of resetting one of the ones we install. th-cam.com/video/bS-xLGQsedo/w-d-xo.html
U are great teacher ❤
Thanks for the video. I have an XMEYE NVR with 16 IP cams connected to a 16-channel PoE. Occasionally, some 8 cameras go offline (no link on the NVR screen) and I have to switch all the appliances (NVR and PoE switch) off and on again to see all cameras. What could be the issue - is it IP related?
What frame rate and kbps are the cameras at? Sounds like a bitrate issue.
@WentworthCCTV checked nvr, all cameras online/offline are at 4M resolution, bitrate of 3316 kb/s and framerate 20 FPS. What could be wrong?
what is the NVR model number?
I learnt so much in 18mins thanks bro. Do you offer Hikvision class?
No, we don't do classes just the videos
What's the software for hikvision on both pc and mac. Can you tell me, can you provide links to download? I want to have the software to view cameras on both pc and mac.
What is the IP software you mentioned? I couldn't find it. Thanks in advance.
To find IP addresses? Advanced IP Scanner www.advanced-ip-scanner.com/
Advance IP Scan Found it works really well and is free!
@@cstanley2207 Yes, it works great. Glad it worked!!
Thanks for this great tutorial. But I was wondering, what would be the step if we use a wireless camera/hikvision or not/ instead of the Dahua. Do we connect the wireless camera to a wireless access point and then to the NVR? or is there another way?
I use wireless bridges to extend the network the NVR is on. For instance, if I have a detached garage. I put a bridge on the house that is connected to the same router or modem as the NVR. Then, at the garage, I plug the receiving bridge into a PoE switch with a couple of cameras and manually add them to the NVR. It doesn't matter if it is a Hikvision or Dahua camera.
I am replacing an 8 channel Hikvision NVR with a new 16 channel Hikvision NVR. When I go through the set up process using the wizard, I cannot get the new NVR to see the existing 8 cameras that were used on the older NVR. Any recommendations?
Is there any way we need to wire the cables that travel from the NVR to the cameras so we don't fry the cameras with the PoE?
I'm not following the question. A PoE switch will not fry your cameras. Neither will the built in PoE of the NVR.
@@WentworthCCTV that answers my question.
I was referring to the order in which I wire my ethernet cable from NVR to the cameras. If say I cross those wires and DC current goes in the wrong way into the camera ethernet port. Thanks!
What if my nvr is 8 port and I have 16 cameras.
I'm guessing I would have to buy an additional 8 port or 16 port nvr
does any hikvision camera work with a hikvision nvr ?
yes
i still cant figure this out because i have hik vision thermal bullet heat camera nvr style model ds-2td2117-3/v1 no recorder the pc wont accept the tiny disc the camera is discontinued so i cant get help. i dont know what numbers to do where on mine you did the numbers for dahua. can you do one for hikvision only that is either net to connect? i only have a day or so left before i have to ship it back so i dont lose the $500.00 i had to spend for a camera that wont work for me. what number would i need to use type in the ip to get in my camera?
Have you downloaded the SADP tool to locate the camera? Use that and log into the IP address it gives you. You download it from Hikvision website, those disks stink.
th-cam.com/video/WW9HL4hPUsg/w-d-xo.html
Can please explain how to connect NVR to 4 PoE switch because I need to connect 30 cameras
Absolutely. Just hardwire each IP camera to the series of PoE switches. You daisy chain or loop the switches together using the uplink port. At the end, one of the PoE switches must be plugged into the same router and the NVR and you just network everything together.
I have a laview LV-PWL2-W wifi camera ,how can I view this on a computer ?
www.laviewsecurity.com/cms/download/
Hi, I'm hoping you can help, I'm desperate.
I have a bunch of analog cctv cameras I have removed from a store. I have run a coaxial cable (power to psu, twist cable to dvr) both to the cameras. Some camera models work and some models do not. I'm literally moving the 2 cables from a working camera to a different camera and it shows no video.
I would assume its because the camera is broken, but I've tried 6 cameras from the shop and they all show no signal.
Yet 4 are showing an image. Most are hikvision cameras but slightly different models.
All poc.
Thank-you in advance!
What manufacturer/ model number is the DVR and what kind of cameras are you trying to connect to it. Some older cameras are 24V not 12V. If you are using a 12V power supply, that may be the issue. Also, if the recorder is old and D1 and the cameras are AHD, that wont work either. It really is impossible to help unless you give the DVR and camera specs.
can i connect a panasonic ip camera (ethernet )directly to my internet providers smart modem ? it has a LAN port. do i just need open/or port forward? thanks
need a poe solution otherise it doesn't get enough power
What's the software for hikvision on both pc and mac. Can you tell me, can you provide links to download? I want to have the software to view cameras on both pc and mac.
Its right on the Hikvision website www.hikvision.com/us-en/support/download/software/
Thx for this great video. I followed every step to try to connect to my laview r18 (I have 3 of them). When I type their IP on my browser (ms edge). I got the message 'refused to connect".
They work great on my cell phone though.
Any clue?
MS Edge is difficult browser with IP cameras. Are you running Edge in Legacy mode? If not, try that.
I’m trying to setup remote view offsite but the stream only runs for about 5 mins and then I have hit play again to have it play. I tried multiple things but nothing seems to be working. Any suggestions or videos on how to fix this. I’m using guarding vision for viewing for desktop view.
Can we connect the dahua ip camera directly to hikvision Poe NVR?
you need to select protocol ONVIF
hi, can you explain the camera it is working till i have broadband internet, once i unplug cable from computer, it stop revording, not even letting view video on my phone, or if plug still in computer, but turn off broadband router, it stopped working camera, so camera will work only if i have broadband internet? without internet - i need NVR box recoder correct? any explanation will help me, i want instal in my car on the roof. with second battery.
thank you
Can ip camera display image without connecting a local area network(lan)
Hi, Set two IP cameras in NVR in order to show the conflicts in HTTP RTSP and SERVER port. How corect this situation.
Thanks.
Hi Went, I would like to know how to manage on second screen monitor
Just perfect 👍🏾
Glad the video helped out!
Hi, will hikvision nvr will work without internet? Will it work as plug in play? Or need to configure it?
Yes, a Hikvision NVR can be used without internet. You just wont be able to remote view.
I need to find someone who can really go into detail on the topology of Hikvision setup. Can both sides of the NVR (LAN and Cameras) be set to the same IP address range? My router is set to 192.168.3. xxx and the NVR LAN side is set to 192.168.3.10 but when I set cameras to 192.168.3.21 and 192.168.3.23 and the Internal NIC to 192.168.3.20 I get an error message "IP Address Conflict". But setting the cameras to 192.168.3.xx is the only way they are visible in ivms4200. When I set cameras and Internal NIC address to 192.168.4.xxx I don't get an error message but the cameras are not visible in ivms4200.
Thank you sir, God bless you ❤❤
love the way you jest explained.
Hi please I need ur help
Thank you
Boring, matching brands and doing the automatic construction will work but how do I know it’s not visible to everyone in China and everyone with a flipper zero?
I can't setup hikvision network camera. Can u give me full solution
ditch that camera and get ya an axis camera, and use axis companion(free).
Thanks
you are welcome!
I need to know more about ip camera and nvr
What happens when it is an old camera same name but used in a different setting lost the password???
Reset camera to factory defaults. Then it will connect.
I'm having problems my reolink Rlc-520 camera accessing remort location canera connecting with poe switch if i stay same wifi i can connected my camera but when i'm not i can't connected my any solutions from you please
Thank you.
Your welcome!
thanks a lot
your welcome
Very helpful
Good information. But just confusing when u talk about other brands . In my option as frist time setup up for me is confusing and keeps going off the set up track. I dont want to make life hard and add different brand cameras.
How did you even find out how to login to make it work.
I am lost in space now.
Can you do just a step-by-step using Hikvison and how to make it secure. Is there a app.
Thanks
Excellent video
Hi What Is solution if you do forget the administrator Username or Password?
Its a Dahua CCTV Camera system
@@justhereforthetakeoff6041 It would depend on the model of the camera, but we made a video on the process of resetting one of the ones we install. th-cam.com/video/bS-xLGQsedo/w-d-xo.html
just locate the reset button and hold it in while powering it up..should factory reset the camera
what about dahua nvr
What about Dahua? The process is the same. What can't you do specifically?
Great explanation
thanks
Add Hikvision cameras to Uniview Nvrw
CN you help me set up mine
💫💫💫💫💫💫💫💫
Thank you!
what is the default password ?
There are no default passwords anymore. You have to create a password when you activate the camera.
chyaaaa kasto hawa geet...