Great review! Yeah, I have the aputure strip box and upon first assembly I knew I was going to have to keep them assembled for local shoots. This strip box sounds legit!
I owned two Godox soft boxes and I've almost torn the fabric getting the rods inside. In fact, they were such a b*tch to put together, I just left them assembled. Unfortunately, leaving them assembled takes up a great deal of space. The quick-release on the SmallRig soft boxes are a MUST!
I bought the strip box after this review. Sent it back same day. ( today) When I took it out of the box the material was pulling out from under the ring that holds it. It took me a good 20-30 minutes to take it apart and get it back together right. I tightened the screws as tight as they could go without stripping. When I got it all assembled again the material pulled out a second time. I would not recommend these to anyone. Very poor design and the material should have had something more to be punched by the assembly ring it mounts under.
![[FINALE] 💸ที่แท้พ่อเป็นผู้ถือหุ้นบริษัทพันล้าน เขากลับใจตอนนี้ก็สายไปแล้ว🙇🏻♂️#ละครคุณธรรม #short](http://i.ytimg.com/vi/yFwgjTFISUI/mqdefault.jpg)
Great review! Yeah, I have the aputure strip box and upon first assembly I knew I was going to have to keep them assembled for local shoots. This strip box sounds legit!
Thanks Michael for the info. I own and use the Smallrig 0ctagon quickfold D55 and also reckon quickfold is the ONLY way to go.
Absolutely!
Hello! Smallrig strip comes with grid?
I owned two Godox soft boxes and I've almost torn the fabric getting the rods inside. In fact, they were such a b*tch to put together, I just left them assembled. Unfortunately, leaving them assembled takes up a great deal of space. The quick-release on the SmallRig soft boxes are a MUST!
Yeah leaving light boxes assembled is not ideal
You should have spin the 6090 90 degrees to get softer light as a keylight
where are yu from
Too bad that the speed rings are not swapable. I have Alienbees, Norman and Photogenic Strobes all with non-Bowen mounts !
you can get adapters for them, I believe the Alienbees need a balcar to bowens adapter
I bought the strip box after this review. Sent it back same day. ( today) When I took it out of the box the material was pulling out from under the ring that holds it. It took me a good 20-30 minutes to take it apart and get it back together right. I tightened the screws as tight as they could go without stripping. When I got it all assembled again the material pulled out a second time. I would not recommend these to anyone. Very poor design and the material should have had something more to be punched by the assembly ring it mounts under.