RCerveryday.com Shop Truck Tire and Wheel Fitment Guide
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- Trying out custom wheels on the rceveryday.com shop truck chassis!
My affiliate link for Boomracing and asiatees.com
www.asiatees.c...
If you like shopping with Amain, please help support the channel and use the link below!
www.avantlink....
Check out my Amazon influencer store page for some of these products and help support the channel!
amzn.to/2NMKTtX
You definitely got it going on bro man you know what you're doing you think that somebody would just specialize in this type of stuff as far as wheels and tires
I think you have spoken to Alberto from Ampro Engineering about tamiya stuff before. Maybe it's worth talking to him about some wheel design for these trucks. I know he has designed a lot of his own wheels. Not to mention the redesigned lights for these Chevy bodies.
Put a a hex on a rear shaft put your wheel on the put it in your drill or drill press get a sharp blade turn on drill and put your blade on to wheel,and part off what ever you need off the wheel ..that’s how I cut most of my stuff down ,bolts etc I’ve turned scale spray cans and bottles in a drill using it like a lathe ..
Awesome video Josh as always. Great
guide. Can't wait till you do the Winnie videos.
Tire science!!!! Ok you donin did it, gotta tub a body for that build!!!.....
Someday I'll get one. I have to finish a couple other builds first.
I figured that you would of put a bench seat in those they would look extremely better for low riders. I think the buckets look good in the K5’s jacked up with big mud tires ! I dropped the shrink rc bench in my blue K10 and painted it With Tamiya light sand. I’m not much of a low rider , although they look super sweet , I like jacking them up 😭
I plan on doing the interior in all of them eventually. Just too many projects at the moment
I got my volume maxed out, and can barely hear you... my ears probably need cleaned, but i dont have this problem with other people's videos, just yours. I gotta hold the phone up to my ear and than i cant see the screen... anyone else experiencing the same?
This is the first Ive heard, playback audio is fine on my phone and computer
Would the BRX70 with 4mm offset on the jellybean Probuilds work,?
Your setup was BRX80 with 0mm offset, and had to trim the fender. (inner side of the outer fender.?)
BRX80 = 162mm
BRX70 = 146mm
That would be a 16mm difference, or 8mm on each side.
I think it may work with the 70. Might need a wider hex to center it up.
@@RCeveryday i could try, just waiting for stuff to get back in stock, rc4wd's stock of body and transmission is 0 atm.
Which Flysky transmitter you using?
Im still using spektrum
For now
Great video 👍
Thanks for putting together this video! Nice to have a run down on the fitment of the different wheels. I have a set of the 3dscale wheels on order, anxious to see them in person!