its nice to see the trucks being worked on at a pace - instead of the ole, tear down, paint match, wrap, re-assemble cookie cutter recipe. Props to you for these vids
I still love my 06 color matched mirrors(blue-granite metallic). I do like the boost auto mirrors, but I like the original better. That’s just me though 🤷♂️
Check your crash sensor on the front, being up north corrosion gets into the sensor and makes it bulge up and causes that light. Get a new sensor and it should fix it right up
Normally the airbag light won’t set unless a connector comes loose. work at a dealership, seen it many times there are also impact sensors in the front and rear bumpers that go bad. Scan tool should give you a code, look into the code online and it should lead you to the problem
I just did the Kryptonite upper A arms, DMax Store lower arms with Kryptonite ball joints, Kryptonite sway bar end links, and new GM torsion bars. I already had changed the steering gear and idler/pitman arms along with new PPE stage 3 tie rod ends a couple years ago. Your video was pretty much spot on with one discrepancy I noticed. That was when you said to turn on the key to unlock the steering wheel. You don’t need to turn the key on because those trucks don’t have a steering wheel that locks.
For me, it was a choice between Redhead and PSC. I did a ton of research, and I found quite a few guys that had lots of issues with Redhead boxes. I went with PSC, and this thing is solid. I'd highly recommend PSC gears.
Great video. I haven't had any luck with Kryptonite. I went through 2 set of ball joints, 2 pitman arms, and passenger side death grip tierods with in 2 years. They honor their warranty in replacements no problem. I have a 07 lbz, 6" lift with 35's.
Check the code, my 2009 had a bad impact sensor causing an airbag light. It was a 20 minute job, sensor was in a weird spot but easy enough to replace.
My truck had the same light. Look under the carpet on driver side where the wiring harness is. I had some corroded wires. Fixed those and the light went off. Should be a yellow and green wire twisted together.
I did the alignment on this after it was done, for real guys, if you're driving a classic style you gotta do this to your steering! It's so tight and feels like a car instead of a sloppy truck!! It's amazing! Jake pull codes, that'll tell you which sensor needs addressed!
May need to replace the clock spring, when you change the batter and the different batteries have different voltages I will mess up some of the electrical stuff
Love my redhead feels amazing especially since my 05 had about 270xxx miles when I changed it especially paired with the kyptonite idler and pitman just need to do tie rods and all that fun Jaz yet.
I did this exact swap on my 05 LLY. the Kryptonite kit and the redhead gear box are awesome. I'm glad I went this route. Question, did you paint the idler support bracket? That thing will rust FAST, especially in the rust belt.
Loved the video, this some of the content we all (at least myself ) enjoy seeing.. Everyday, run-of-the-mill, good ole truck maintenance...... Good stuff.
I have one question. Why work on the ground if the truck is on a lift? Raise that thing up and stand up to work. You can move a lot faster if you do that.
Look into doing the LML hydro boost upgrade. Also look into stainless power steering lines. It’s a great upgrade to what you are already doing. PS: I’ve done everything you have with the addition of a 4.5 BDS, Kryptonite upper control arms, and dual shock hoop. 👍🏼. Keep up the great work.
Amsoil easy packs. I'm telling you guys, you'll never use anything else to fill a diff once you try those. So much easier than the hand pumps, It takes longer to cut the cap open and pop the seal than it does to squeeze a quart of fluid in!
The upper and lower ball joints didn’t need love? My uppers were original (133k on my 06)were shot, and I replaced everything. I used a blue top box though. I couldn’t find a PSC with a search warrant when I did mine. I love the color of the the truck Jake
What’s his wheel and tire set up on the lbz? Looks pretty dope. I have an 06 stock lbz and looking to run a similar stance that he has. Any info helps, thanks
I would just like to say for such truck enthuzst you guys are and me lol, and your using valvoline oil and fram thats bottom of the barrel. I still like the trucks though😉
I love y’all and the channel but it kills me when y’all don’t actually use the lift and still work on the ground like it’s on jack stands and Jake brother your truck doesn’t have a “rack” just the steering box and you’ll need to use a scanner the will connect to the air bag stuff to see which sensor needs to be replaced or if it’s just got corrosion at the plug
its nice to see the trucks being worked on at a pace - instead of the ole, tear down, paint match, wrap, re-assemble cookie cutter recipe. Props to you for these vids
Jake it's time to get some BoostAuto mirrors with some paint match for the LBZ👌
Nah those stock color matched mirrors are just 🤌🏻😙
@@gploghoft it’s in his name lmao
I still love my 06 color matched mirrors(blue-granite metallic). I do like the boost auto mirrors, but I like the original better. That’s just me though 🤷♂️
Right!! He got everything done but his mirrors
Check your crash sensor on the front, being up north corrosion gets into the sensor and makes it bulge up and causes that light. Get a new sensor and it should fix it right up
Yup look up @truckmaster video on his lbz
Normally the airbag light won’t set unless a connector comes loose. work at a dealership, seen it many times there are also impact sensors in the front and rear bumpers that go bad. Scan tool should give you a code, look into the code online and it should lead you to the problem
It great seeing Jake take control of the video killer energy I see why ya too are like brothers
Airbag lite is one of the 2 sensors along the bottom of the radiator support either broken or exposed wire
I just did the Kryptonite upper A arms, DMax Store lower arms with Kryptonite ball joints, Kryptonite sway bar end links, and new GM torsion bars. I already had changed the steering gear and idler/pitman arms along with new PPE stage 3 tie rod ends a couple years ago. Your video was pretty much spot on with one discrepancy I noticed. That was when you said to turn on the key to unlock the steering wheel. You don’t need to turn the key on because those trucks don’t have a steering wheel that locks.
For me, it was a choice between Redhead and PSC. I did a ton of research, and I found quite a few guys that had lots of issues with Redhead boxes. I went with PSC, and this thing is solid. I'd highly recommend PSC gears.
When Jake takes over he keeps the content rolling to gotta love it
Thanks for participatetion and comment♥️
you have been randomly selected
among winer's for today hit me up🔝🔝🔝to claim your reward 📦
Great video. I haven't had any luck with Kryptonite. I went through 2 set of ball joints, 2 pitman arms, and passenger side death grip tierods with in 2 years. They honor their warranty in replacements no problem. I have a 07 lbz, 6" lift with 35's.
the sickest sounding LBZ with that stealth 64 turbo Jake it gives me goosebumps every time I hear it on the channel 😃😃
The airbag sensors behind the front bumper
Check the code, my 2009 had a bad impact sensor causing an airbag light. It was a 20 minute job, sensor was in a weird spot but easy enough to replace.
I know their is a sensor under the front bumper prone to cracking. The check wiring under your passenger seat for the air bag light
Thats how my lmm steering is. Have new control arms, cv axles, idler arm/ idler arm bracket, and tie rod ends
My truck had the same light. Look under the carpet on driver side where the wiring harness is. I had some corroded wires. Fixed those and the light went off. Should be a yellow and green wire twisted together.
Thanks for participatetion and comment♥️
you have been randomly selected
among winer's for today hit me up🔝🔝🔝to claim your reward 📦📦.
That airbag light should be the front impact sensors, both went bad on my 05. They corrode over time. Super easy fix!
I did the alignment on this after it was done, for real guys, if you're driving a classic style you gotta do this to your steering! It's so tight and feels like a car instead of a sloppy truck!! It's amazing!
Jake pull codes, that'll tell you which sensor needs addressed!
Thanks for participatetion and comment♥️
you have been randomly selected
among winer's for today hit me up🔝🔝🔝to claim your reward 📦📦.
May need to replace the clock spring, when you change the batter and the different batteries have different voltages I will mess up some of the electrical stuff
Used bluetop gearbox and love the tight steering with all kryptonite upgrades
Best Chanel by far
The airbag light 9/10 is a cracked sensor on the front bumper or wiring for the sensors
Love my redhead feels amazing especially since my 05 had about 270xxx miles when I changed it especially paired with the kyptonite idler and pitman just need to do tie rods and all that fun Jaz yet.
I did this exact swap on my 05 LLY. the Kryptonite kit and the redhead gear box are awesome. I'm glad I went this route. Question, did you paint the idler support bracket? That thing will rust FAST, especially in the rust belt.
Check the clocking spring
My truck has the airbag light on, too. I got it to turn off once by changing a blown fuse. Lasted a few weeks. Not sure why it came back on
I put red or blue top steering boxes in all my trucks. Upper and lower control arms powder coated to match the ladder bars, why not ?
to fix the airbag light, replace the front impact sensor, had the same problem on my 05GMC many moons ago.
Thanks for participatetion and comment♥️
you have been randomly selected
among winer's for today hit me up🔝🔝🔝to claim your reward 📦📦.
Check the sensors in the front. You can see them through the bumper. One on each side.
2500HDs only have one impact sensor in the center of the rad support
Loved the video, this some of the content we all (at least myself ) enjoy seeing..
Everyday, run-of-the-mill, good ole truck maintenance......
Good stuff.
Thanks for participatetion and comment♥️
you have been randomly selected
among winer's for today hit me up🔝🔝🔝to claim your reward 📦📦.
I have one question. Why work on the ground if the truck is on a lift? Raise that thing up and stand up to work. You can move a lot faster if you do that.
Some good ol lbz content! Sometimes this is what you need! She sounds like a baaaadddd machine! Great video!
Thanks for participatetion and comment♥️
you have been randomly selected
among winer's for today hit me up🔝🔝🔝to claim your reward 📦
Look into doing the LML hydro boost upgrade. Also look into stainless power steering lines. It’s a great upgrade to what you are already doing. PS: I’ve done everything you have with the addition of a 4.5 BDS, Kryptonite upper control arms, and dual shock hoop. 👍🏼. Keep up the great work.
Jake, check the wiring behind the kick panel on the drivers side. Sometimes when I just kick that panel my air bag light shuts off.
It’s a fake giveaway
This isn’t just for the LBZ or Duramax’s this is good to do for people with Tahoe’s Hummers etc
Front driver side passenger crash sensor easy fix hope that helps ya
the airbag light isnt a problem with your actual airbag most likely its your crash sensor on the front
Could you put all the parts you ordered in the description? I'd like to update my lb7
That Turbo noise 🤤
Amsoil easy packs. I'm telling you guys, you'll never use anything else to fill a diff once you try those. So much easier than the hand pumps, It takes longer to cut the cap open and pop the seal than it does to squeeze a quart of fluid in!
2:11 dude Maryland did the same
Jake if you could read the code, it might be as simple as an impact sensor
Thanks for participatetion and comment♥️
you have been randomly selected
among winer's for today hit me up🔝🔝🔝to claim your reward 📦
if i remember correctly its that clock spring inside the steering wheel
This is definitely on my list of things to do to mine too! Awesome
Good to see you Jake! Love seeing the lbz getting some love
Love this channel so much always staying tuned for more great content!
Thanks for participatetion and comment♥️
you have been randomly selected
among winer's for today hit me up🔝🔝🔝to claim your reward 📦
Love seeing the lbz on the channel🔥🔥
Im watching this video with my beats studios and It caught the whistle of the LBZ on point
Thanks for participatetion and comment♥️
you have been randomly selected
among winer's for today hit me up🔝🔝🔝to claim your reward 📦
Sensor on front of truck for the airbag light.
Great timing vid lol I’m about to re do my front end
You should do a video of taking the flares off the lbz to see how rust free it actually it is I'd live to watch that on
That start up though!!💪🏼💯🔥
Thanks for participatetion and comment♥️
you have been randomly selected
among winer's for today hit me up🔝🔝🔝to claim your reward 📦📦.
Hey the air bag light is most likely one of the sensors in the front of the truck behind the bumper probably Corded
Thanks for participatetion and comment♥️
you have been randomly selected
among winer's for today hit me up🔝🔝🔝to claim your reward 📦
It’s a fake giveaway
So is this really a must I have a lly but not running wide wheels
Which redhead gear box did you get? I have a 03 lb7 and looking to replace mine
The upper and lower ball joints didn’t need love? My uppers were original (133k on my 06)were shot, and I replaced everything. I used a blue top box though. I couldn’t find a PSC with a search warrant when I did mine. I love the color of the the truck Jake
Thanks for participatetion and comment♥️
you have been randomly selected
among winer's for today hit me up🔝🔝🔝to claim your reward 📦📦.
Whats the lift/fitment on this truck? Looking to do the same for my cateye
I prefer these kinds of videos
The LBZ is lookin good bud. Great video
Thanks for participatetion and comment♥️
you have been randomly selected
among winer's for today hit me up🔝🔝🔝to claim your reward 📦📦.
What’s his wheel and tire set up on the lbz? Looks pretty dope. I have an 06 stock lbz and looking to run a similar stance that he has. Any info helps, thanks
Air bag light might be the airbag clock spring. I just changed mine and my LBZ and my airbag light went off.
Thanks for participatetion and comment♥️
you have been randomly selected
among winer's for today hit me up🔝🔝🔝to claim your reward 📦
What level kit are you using with the fox shocks
Any reason why you won’t mention the wheel and tire size?
Should’ve gotten the upper control arms as well
Can’t wait to watch this episode! 6 minutes in
Hell yeah great vid 👍🏼
@Jake - are you running stock foglights on that truck? Have you had issues with them letting moisture or water in? If so any solutions?
I wonder if the service the airbag on your dash has anything to do with the light being on. Hopefully it's a simple fix
Thanks for participatetion and comment♥️
you have been randomly selected
among winer's for today hit me up🔝🔝🔝to claim your reward 📦📦.
We need more videos of bandit
It's a sensor under the passenger seat mine is 160 dollars at autozone
Thanks for participatetion and comment♥️
you have been randomly selected
among winer's for today hit me up🔝🔝🔝to claim your reward 📦📦.
Good video with jake
How much was all the parts in total with tax?
psc big bore box and be done with ut
get a exhaust tip for the LBZ
Can you make a list on the mods you did, would like to do that to my lly
What color is that LBZ?
Change the sensor behind bumper
Thanks for participatetion and comment♥️
you have been randomly selected
among winer's for today hit me up🔝🔝🔝to claim your reward 📦📦.
Are you getting that duramax ready to handle 4wd launches or what
what size wheels??
Jake your LBZ is so dope
Thanks for participatetion and comment♥️
you have been randomly selected
among winer's for today hit me up🔝🔝🔝to claim your reward 📦
I would just like to say for such truck enthuzst you guys are and me lol, and your using valvoline oil and fram thats bottom of the barrel. I still like the trucks though😉
Thanks for participatetion and comment♥️
you have been randomly selected
among winer's for today hit me up🔝🔝🔝to claim your reward 📦📦.
I just bent the rear axle on my 98 ram 1500 😆
Thanks for participatetion and comment♥️
you have been randomly selected
among winer's for today hit me up🔝🔝🔝to claim your reward 📦
Forgot your ball joints/upper control arms daddy
Whats the wheel and tire set up on that beauty?
Thanks for participatetion and comment♥️
you have been randomly selected
among winer's for today hit me up🔝🔝🔝to claim your reward 📦
You should strip the frame and paint it
Looks like you need a fancy $800 steering wheel now my good sir
This the earliest I’ve ever been
Thanks for participatetion and comment♥️
you have been randomly selected
among winer's for today hit me up🔝🔝🔝to claim your reward 📦
Right on jake keep up the good work you are getting pretty good with the vlog responsibilities 👌
Thanks for participatetion and comment♥️
you have been randomly selected
among winer's for today hit me up🔝🔝🔝to claim your reward 📦
What kind of radio is that
Thanks for participatetion and comment♥️
you have been randomly selected
among winer's for today hit me up🔝🔝🔝to claim your reward 📦📦.
Blue top steering box > red head all day
I thought a 727 was flying pass in the beginning 😆
Thanks for participatetion and comment♥️
you have been randomly selected
among winer's for today hit me up🔝🔝🔝to claim your reward 📦📦.
You should get rid of the 2006 truck and gmc jack
Thanks for participatetion and comment♥️
you have been randomly selected
among winer's for today hit me up🔝🔝🔝to claim your reward 📦
Why do you guys work on the ground? Raise that lift up
Thanks for participatetion and comment♥️
you have been randomly selected
among winer's for today hit me up🔝🔝🔝to claim your reward 📦📦.
Nice
I guess I missed who is the new guy
Bro😍😍😍
First how u doing
I’m doing good
Hernandez Betty Clark Steven Jones Joseph
I always here bad things about red head for these
Thanks for participatetion and comment♥️
you have been randomly selected
among winer's for today hit me up🔝🔝🔝to claim your reward 📦
I love y’all and the channel but it kills me when y’all don’t actually use the lift and still work on the ground like it’s on jack stands and Jake brother your truck doesn’t have a “rack” just the steering box and you’ll need to use a scanner the will connect to the air bag stuff to see which sensor needs to be replaced or if it’s just got corrosion at the plug
Thanks for participatetion and comment♥️
you have been randomly selected
among winer's for today hit me up🔝🔝🔝to claim your reward 📦📦.
Jack u couldn’t of found a better wing man brother