How to Build A Freestyle Quadcopter // Holybro Kakute F4 V2 , Tekko32, , GEPRC Mark2
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- Beware of Scammers Please Contact Only through My Email mesh.drone@gmail.com
The Maiden Flight
• Holybro kakute AIO V2 ...
The Holybro Bundle I used
www.banggood.c...
The Motors
www.banggood.c...
GepRC mark 2 frame
GepRC Mark2
www.banggood.c...
Runcam Swift Alternative same sensor as good
www.banggood.c...
The FPV antenna
www.banggood.c...
------------------------------------
I highly recommend these boards over 2 months of testing best money can buy
Racerstar StarF4S
goo.gl/GeiaW1
Racerstar Star F3s
goo.gl/adcc2P
amzn.to/2A4J4Cl
---------------------------------------------------------------
The HEX driver I recommended which i bought 2 sets of (Must have if your into building)
goo.gl/mHW9HW
Batteries I use
www.banggood.c...
Camera I use
amzn.to/2iQHCwV
Standoffs I find to be the best
www.banggood.c...
Xt60 Premade I use
www.banggood.c...
Heat shrink I mentioned
www.banggood.c...
Soldering station
www.banggood.c...
Checkout the website for more details on the reviews
Website updated 2 to 4 days after the release of the video
dronemeshlab.com
Follow me on Facebook
/ dronemesh
Consider Following me and supporting on Patreon for Big giveaways.
/ dronemesh
Contact: mesh.drone@gmail.com
---------------------
Song Used
/ living-in-stereo
------------------------------------
Song Used info
Track was provided by NoCopyrightSounds
Paul Flint - Savage [NCS Release]
• Paul Flint - Savage | ...
Paul Flint
• / paulflintmusic
• / paulflintmusic
• / paulflintmusic
• / paulflintmu. .
• Mastering by redwolfmasterin...
Song: Distrion & Alex Skrindo - Lightning [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Distrion & Alex Skrind...
Download/Stream: ncs.io/LightningYO
ID: dj2938hd298hflahsknckdfhsidufh9398
good vid, except what you refer to as the Buzzer + pin is actually vbat and your camera wire should go there. just so you know since you seem to want to keep it neat. The buzzer plugs into the buzzer - and 5v right next to it... says so in the manual ;)
yeah awesome vid as always! and lol yes i noticed that too as i am soldering it now :P, Drone Mesh maybe you can make above a sticky post please ? as it might lead some people to make a mistake.
I dig your build bruh and how you stayed on topic is the way to teach us newbies.
BRAVO 2 YOU my MAN.
now put it in the air and don't forget to show us what you did in betaflight but please take your time...remember we are newbies.
If you insert cable before soldiering then you solder it from back side it’s better
Thank you for taking the time to post such an informative video. I’m also in the middle of a 6” 3km range Flynocerous Aether frame Kakute F4 V2 build and can confirm UART 3 (T3 & R3) can also be used for a Crossfire receiver. It seems UART 3 can auto-detect whether to invert or not. Very cool ! I now need to figure out if I can use the SP pad (UART 1) for Smart Audio to control a TBS Unify. That then leaves UART 4 for GPS and UART 6 for Runcam control and UART 5 (Rx pad) for ESC telem. Happy flying ...
How the results ?
I got a Chubby looking at this one. Jesus that's a sick build. I bet if flies like butter.
that thing looks so damn good that i don't want the video to end
Fantastic build meshman. Been waiting for this six inch build. Looks mean as hell. Can't wait for the video. That camera twist might mess with you. We will see. Keep em comin
if you want to put a wire through a hole and solder it you should try to put the wire in the hole and then aply heat and solder, and if its hard then try to do it under the FC witch the wire comes out the hole.
dont just add solder on a pad with a hole and block the hole for the wire.
I was thinking, since people make comments about you using a large soldering tip for every pad... you could have one of your other portable irons set up with a smaller tip for the signal pads. I’m guilty of never changing my tip size either to be honest. Keep up the great videos! 👍🏻
Sometimes im lazy to change sometimes i want to troll a bit with it.
Awesome build! Love your channel! I'm using kakute v2 in my build as well. I routed the vtx/cam differently though, and I'm having some noise and flickering osd issues. Could you help me out? I power the cam from the VTX 5v output. And the VTX power lead is connected to the B+ pad next to the 5v pad instead of the battery. Might this be an issue? And also I think the problems started when i switched the VTX power to the higher settings (600mw).
One more question, what temp. is set on your soldering iron?
Thanks in advance!
Nice build. Got all the parts for a 210 build, just got to get up the confidence to solder her all together. 👍
Dronography-Aerial Meditation my advice is to have about 4 cups of coffee and maybe even a red bull right before you solder. The uncontrollable shakes really adds to the challenge of soldering lol
3 cups down, may have to go in there and give it a shot. LOL
Am I the only one that see's the camera is crooked? I know you said that you had a problem with mounting it, but I don't know if I could fly with it that way. I am already going cross-eyed when flying FPV...LOL Otherwise, great build! I have yet to build a six inch and I think it's about time. I want it for distance and some free style... Thanks for the video's! Keep up the good work!
Hi Drone Mesh, question about the Tekko32 esc's i got 5 wires coming out to my board, + / - / TX / White one / Blue one / Gnd . Where is that last one GND going ? i see you leave it without wiring ?
Nice Job that quad came out really nice.
Another beautiful build!!! I expect nothing less anymore! Thanks for the video!!!
wish the f7 aio had the thru holes for the buzzer like this ,mine has crappy little pads ,the second i touched it with the iron it came off lol
Nice build, NOW I have another way to build my chameleon
That video antenna is sweet, I use them and they are great!
Can't wait to see it fly.
Awesome build as always! Gotta get some of those Tekko32;s!
First time builder question...
For the Tekko32, you only solder the (white) PWM to M[n] and (blue) Tx to Rx5 pins, but not the ground?
Any reason why not (since they seem to include a smaller black wire in the stack kit)? :)
cheers!
If you use a multimeter, you find continuity between both GND pads, therefore it is OK to leave the one next to the TX pin
GadgetFPV Indeed, I just realized that while swapping a broken ESC, cheers :)
Sweet quad, man! Beautiful job!
Nice clean build, very informative as usual!
Very nice
👍👍👍
Not trying to nit pick, love your vids and have subbed for a long time. Atlatl is pronounced at-laddle which is an ancient spear throwing device.. I can't drop drone knowledge as you're already 100 times more adept than I am but the atlatl is a now in your vocabulary..youre welcome😆
2stroke Me it's and extremely effective weapon...
QUADBOT FPV indeed it was, I'm actually surprised to see that vtx named after such an obscure part of history. Neat, I'm buying one just for their creativity!
That thing is awesome . Nice build.
hey bud i love the videos u put out, could you add some dvr or gopro, just add it with these vids even if its a short clip when u fly with dvr capability, you will get more interaction and longer views hence more youtube points/ revenue love your info u put out!!
just came across your channel, subscribed to it, very good tutorial for the Kakute and tekko esc, if possible kindly tell me what gauge wires did you use on various places like for example wire gauge used in wiring the esc telemetry etc, thank you
Looks great. It's gonna be fast
Hi there! I am quite a beginner, and I wonder: ground signal for for ESC is not required?
And if it does so (in my case maybe haha), do we have to join GND (small port GND next to PWM and TX in the video) of alll ESCs and then put it on GND of the board?
Well done I love it I think it will be a beast for sure
Damn, that looks so awesome. Indeed, like you said: ready to tear your head off! XP Great upload, thanks for sharing.
Awesome VIDEO!!!
I need one of them in my life
Nice work man! One single question...how the amp current works with you? I cant put it working on my kakutes...
Love this frame
Hey mate. You also don't solder the ground of the esc signal. Is it even possible? I don't find any place for the ground. It is kind of important. Thanks.
If you use a multimeter, you find continuity between both GND pads, therefore it is OK to leave the one next to the TX pin
The only thing that I would like to have is pads for all the connectors. that is the reason why I am not getting this F4
hey, the Tekko32 have such beautiful LEDs and you hide this with heat shrink tubing?
If I had a 4in1 kakuta esc could i use it with a cl racing f4 flight controller
Which port is use for signal wire in i-bus in this flight controller???
would love to see some flight footage from you
For this build do you Need a capacitor 25v 1000uf ??? Thank you so much. the Channel is very powerful for us :)
The Maiden Flight
th-cam.com/video/_53VcBNmnzo/w-d-xo.html
Oh boy, that was a fast video release :D
Btw, I'm interested (but I'm not a 5$ pat)
Funny how you say every quad you build is a “beast”. It kinda waters it down a bit. But nice vid man!
Your vids are very helpful for a nube like me, thanks! Just a quick question, I have the opportunity to get an ImpulseRc Warpquad 230 Acro complete with Cobra 2204/1960kv motors. Is this a decent quad for freestyle?
I have a question which only you might be able to answer - I have a Holybro Kakute, and when I plug in the USB both the power light and the status light light up - but when I plug it into betaflight I can't connect at all?
Did you check your drivers?
@@DroneMesh i did and unfortunately the FC doesnt get recognised as a USB device in Zadig at all.
I was looking to see where you were gonna put capacitors, and you did not put any....
Man love all your vids but i have tell you some... This ESC is piece of art and you hide them like they will be kiss ESC :D. GET SOME TRANSPARENT HEAT SHRINK. I order them after you review and i dont see the LED so sad.
Great job anyway
So no need to soft mount the fc right? Can you soft mount it anyway if you want?
Hi Eric. Yes on the Kakute F4 and F4 v2 the Gyro is already soft mounted. So you really don't need to soft mount it further. You can do it still if you want though...
Beautiful
I REALLY REALLY love your videos. THANK YOU SO MUCH ! I am interested in buying your kwads. PLEASE let me know ..Thank You !
V-bat is to left pad
The frame is 260mm?
Can you compaire this vtx with the tx526 ?
Any used esc's?
Thanks
Funny way of antennas placing
what is with audio ?
What temp are you using when soldering the small pads.
Kemonric Little I have it set to 370c
Nice
Amazing video
If you have fatshark you want sale it I want order it
hey r u still selling all ur stuff?
You see and ultimate 6inch 😂
Hey whats up. Did you only mean you was selling your stuff to 5 dollar patreons only?
Yooo ...
Lol, you are pretty fast builder 😂
But I'm faster !
After the tenth 'insane' I had to stop watching..
Agree... this bug has been fixed in later uploads.. Hope you understand ;)
Pateron over $5 tier 😩😩
Howdy!!! First yooo
First :D :D
Nebojsa Maksin Holy crap your fast
I have buy the same combo , only difrent motors camera and frame. Ty so much for this build it will help me alot when i build mine. :)
Nebojsa Maksin I wish I could see the exact time cause I refreshed and didn’t see any other comments and then did again and there was like 4
Mini Quads Mega Fun he commented within 2 seconds of me pressing publish.
Did i win something ? :D hehe