12 Useful Upgrades for Your Ender 3 Pro // engineericly
ฝัง
- เผยแพร่เมื่อ 9 มิ.ย. 2024
- 12 Useful Upgrades for Your Ender 3 Pro
Here is how you can upgrade and modify your Ender 3 Pro for cheap price :)
• FOLLOW US
- Instagram ➙ / engineericly
- TikTok ➙ / engineericly
• RECOMMENDATIONS
Buy your new 3D Printer using following links to help the channel:
Ender 3 ➙ geni.us/cr-ender3
Ender 3 Pro ➙ geni.us/ender3-pro
Ender 3 V2 ➙geni.us/ender3-v2
Ender 3 MAX(the most recommended) ➙ geni.us/Ender-3-MAX
• CREDITS
- 3D Models to upgrade your Ender 3 Pro:
0:00 - Introduction to 12 Useful Upgrades for Your Ender 3 Pro
0:30 - Ender 3 Pro Vent Ring:
thingiverse.com/thing:4724529
1:18 - Ender 3 Pro Filament Guide:
thingiverse.com/thing:3434928
2:45 - Ender 3 Pro Damping Feet:
thingiverse.com/thing:2913473
3:25 - Ender 3 Pro Rail Cover:
thingiverse.com/thing:3196302
4:12 - Ender 3 Pro Bed handle:
thingiverse.com/thing:2957507
5:04 - Ender 3 Pro Full PCB cover with drawers:
thingiverse.com/thing:4570890
6:23 - Ender 3 Pro Extruder knob:
thingiverse.com/thing:2776404
6:48 - Ender 3 Pro Spatula holder:
thingiverse.com/thing:3094723
7:27 - Ender 3 Pro Knob cap:
thingiverse.com/thing:3611103
7:49 - Ender 3 Pro Power supply silencer:
thingiverse.com/thing:4631303
8:11 - Ender 3 Pro Dual drawer:
thingiverse.com/thing:4059742
9:32 - Ender 3 Pro Carry handle:
thingiverse.com/thing:4088938
10:00 - Final look
- Music:
Music by: Alexander Nakarada
1. • ♩♫ Epic Music ♪♬ - Rap...
2. audionautix.com
3. • Rain
• DISCLAIMER
- All extraordinary acts in this video were done by video editing.
- We don't own the 3D printed models in this video, They belong to their respectful owners.
- Printing times given for prints may vary for you, as they were recorded directly from slicer software not after actual prints
• TAGS
#engineericly #ender #ender3 - วิทยาศาสตร์และเทคโนโลยี
Who knows better upgrades for Ender 3 Pro? 😊
And, which upgrade did you like the most? 😅
Buy your new 3D Printer using following links to help the channel😊:
Ender 3 Pro ➙ geni.us/ender3-pro
Ender 3 V2 ➙geni.us/ender3-v2
Ender 3 Pro ➙ geni.us/cr-ender3
The bearing spool holder is pretty good used it for a year no problems at all
+ the flexi filament extruder mod( printable) and the top mounted tool holder
The drawers
Can you make'Pendulum'
I am eleven years old
The damping feet are a great idea but you're meant to level the base before you assemble it so it doesn't wobble like that..
Took his power supply and made a cover to direct the exhaust into the intake. Genius!!
lol
yeah, he really should have turned the holes 90 degrees, i think it might be because the file on thingiverse must have been made for the 3 but the 3 pro PSU has its holes different, just to be different i guess.
that is the "Ender 3" version... that is so wrong lol
He's trying to create an oven
Genius ki ulaad
He is my son😊👍
😊😊😊
The prodigal dad!
Such a lovely family relationship
Based dad
Ppl p
the damping feet are good for silencing vibrations, but you should definately still square up your 3D printers frame :P
That music and the sounds from the plastic leaving the surface are so calming.
"Hey, I bought a 3D printer!"
"Cool. What do you print with it?"
"Mods for my 3D printer. Duh."
Lmfao 🤣🤣🤣
Thank you for adding the time to print for each item!
Hello. Very satisfying printing. I bought Ender 3 pro and i decided to use some of these upgrades. 🌞
The time lapse scenes are sick. Well done
I'm currently running some of these mods in the same green. thanks for this video!!
Strangely satisfying to watch
Awesome!!
I struggle a little with the language, but nice video! Thanks for sharing!
Just ordered my Ender 3, and ironically can't wait to print upgrades for it! Great video
Ironically means something other than what you seem to think it means
@@fluxpistol3608 hmm, isn't that ironic?
a machine making parts for itself. im doing the same currently. have fun
07:45 LOL work LOL...
awesome , well done
I would never pick up my printer by the top beam. That risks misaligning the metal extrusions and plus, all that weight is being held by those 4 bolts
very beautiful and creative inventions, the irony is to print them all and use them for printer.
Irony means something other than what you seem to think it means
@@fluxpistol3608 Bro I'm Turkish man, sorry for my English
When I printed my filament guide, the bearing was not spinning freely. My gears seem to be stuck together. 🤔 any suggestions how to make them spin freely? My printer prints the base to snap off but I see you didn’t have that. Could that be my issue? I’d appreciate the help. This is my 3rd day out here idk... idk.. (lil Uzi voice)
What slicing software were you using and what settings were you using?
Thankss !!
Very Great 😍❤️
Really like the green on these wonderful mods
What driver set is that your using? Can I have the link to purchase one?
Wow they are awesome upgrades. Which filament did you use to make those things?
probably pla, i wouldnt use abs in an open style printer
i think pla or petg maybe?
@@filip8985 Not sure how well the air flow for the nozzle will do with PLA. It's pretty warm down there and mine warped before I even started printing. Just went back to stock. Everything else should be fine tho. ABS prints fine on the ender 3 but you should have good ventilation. Creality actually gives you a small amount for the sample prints on the USB flash card they provide.
Ficou até mais bonita, a comunidade Ender 3 esta de parabéns.
Obrigado pelo seu comentário amável :)
Neat ideas but I'm going a different route on all the designs. Glad you had fun, that is what it is about.
И каков же ваш путь?
Great film. When this will be a series, that you have 1M subscribes!
Those are great parts! I would try Cheps Cura profile your prints will look alot better
what filament material did u use?
Very cool.
Nice Video it's PETG or PLA?
Amazing work😮
My Enders 3 V2 has stopped lifting wallet prints after only two weeks. Can it be stepper motor is going bad already? I'm not abusing it. I've reached out to the manufacturer and so far been ignored. Any help or advice would be appreciated.
Do these also apply to the v2?
Danke
Hey all do you have the files for for all these upgrades feel as if the main machine should come with all these included love the storage ideas
Thanks 😊
Cool job
Hello, thank you :)
Did you do something to get your extruder knob to fit? Mine looks differently.
i imagine its just a tight fit, if yours is loose you could glue it
No drag chains? Thats what I would like to see next.
Cool stuff guys,which upgrades your Ender.
So the feet for the ender 3 caused significant echoing in my prints. But they’re successful for others. It’s a quick print, so test it out!
yeah those feet looks wonky haha
Isnt it bad to carry your printer from the cross bar at the top? Like how was shown here with the handle you can print. Isn't that just asking to throw it off of square?
Yep
I was thinking this. The cross bar is only for keeping the Z beams rigid and never intended to hold the weight of the hole machine. You should always pick up a printer from its base.
Even then, printers like this (Ender/Prusa) That are just a frame and a base are verry much a set and forget type deal. Moving it from where it was built always has a chance of nocking something askew, and may require adjusting when replanted.
Nice .........love long vids ❤️
Glad you like them!
Where'd you get that screwdriver from?
This is awesome! I can highly recommend micro Swiss direct drive best upgrade ever!
Have you done this upgrade, please can you tell me how is the printing results after the upgrade?
@@engineericly It's awesome. It gives better retractions and prints Flexi filaments easy no issues, I have it with the all-metal hot end for micro swiss and the print quality is amazing it has improved in my opinion, for me at least it gave me better print quality better retraction, and the ability to print flex filament with the great quality I did a 20x20 cube and quality was awesome and every side was 20,00mm except for one which was 20,02mm.
Hey i recently got the ender-3 Pro, and whenever i try printing something, it starts from the side and then messes everything up, it does print properly.
but when i print the project they gave (the one in the sd card from shiping) it print properly.
Can you please tell me why this is happening?
Thanks
What color filament was used?
@engineericly is the extruder already modified? i printed the knob but i cant stick it on since i dont have the piece of metal sticking out above the golden one
Creality changed the stepper motor, it no longer has a shaft.
I printed 5 handles and everyone had issues until I did it with supports then I was sanding the 5th one and it broke the 6th one I made tonight really THREW my bed way off and I can NOT get it balanced now!! Any help???
I printed and installed a dual drawer for my ender,but my y axis wheel(under the bed) bumped into the surface of drawer when printing….I can’t figure out the reason?Is the file wrong?
Very good job
Great video only thing I wouldn’t do is that Filament guide. because there are a lot more simple filament guides that take a lot less filament!
I thought that was the coolest filament guide ima definitely try printing it
😍 definitely I should update my ender 3 like this
Will you share images then? 😅
@@engineericlysure.i will tag you 😊
Can someone help me I printed the tool box installed it and now a wheel screw under my bed hits the top of the box
Can the screw be shortened or moved up?
Hi mate.
I would like know how can you measurement exactly to get fit ( I measurement correctly but it was wrong size after I printed it out. Could you please share to me.
Thanks mate
if your not using calipers i recommend that, but you just be able to download files that shud fit right
did u calibrated ur printer there is a calibration settings u can do it with printing a calibration cube
What brand and exact color green is that?
The power supply silencer is not supposed to be oriented to blow into the intake. This is how you kill a PSU.
Nice video, but please never shoot black devices on black backgrounds...
Hello I have a question these upgrades are also compatible with the printer
ENDER 3 MAX ???
Some of them!
What filament is this?
Amazing work🔥😍❤👍
Thank you! 😊
@@engineericly ❤👍
More hack videos!
I think Ender 3 is one of the best budget 3D printer
Yes, maybe the most customized 3D Printer ever 😅
Nice upgrade 😀👍!!!
This very very pro...because they printed thing that upgrade the printer...
Thanks 👍
No bright green cable clips?
Link for filament?
I just got the AnyCubic Vyper and it has ALL THISand MORE!!! STOCK out of the box!!
I see your knob cover wasn’t tight either! A bit of double sided tape fixed that.
Elinize emeğinize sağlık teşekkürler :)
Brilliant video but the best thing is you give times for the prints
Noted!
Well, the times for the print can change if you change the slicer config, I printed the drawers with the 1 mm nozzle instead of the default 0.4 mm, so it took like half the time, but it is something you learn as you print.
Where do I find these mod download
So right around 68 hours?
Anything for ender 3 v2
Do you use Ender 3 v2?
No its my dream printer .....
And creality cr 6 se too ❤️ and biqu b1❤️ ....
Oh they all are so good 😳
still can't own one 😭😢
Btw why are you asking so? 😅
@@sapnarani2095 konsa hai apke pas?
@@BassBoostedWorld koi bi nii 😂😂
@@sapnarani2095 you can get one for under $200 from comgrow sometimes
Did you do all those prints in PLA?
I’ve printed some upgrades for another printer on pla and they work great unless you try to print abs then I wouldn’t recommend but there also higher heat resistant pla so you can get that but I still wouldn’t try to print abs in an enclosure with them
is this a projector?
Holy crap! What are your print speeds? I must be printing in turtle mode. My drawer took 4 and half hours at 100 speed
How? What are your printing speeds? And how do you change it? Thanks
First
Edit:-For real
Yes, I saw you were the first again, Congrats brothers 😊
I wish I also had 3d printer. 😭😭
These are not upgrades, it is just to complete the things that the company is missing ! Thank you.
Thanks for the info! :)
and some of them actually are bad for the printer, like the power supply fan silencer. It makes the intake for the fan right next to the exhaust
отвод тепла не в ту сторону, надо вправо чтобы теплый воздух обратно не всасывался
Wow
Wie geil is das denn,wow....👍👍👍
That was amazing
Thank you!
Which upgrade did you like? 😊
@@engineericly filament guide and bed handle gonna have to print those soon
I just discovered that my Ender 3 Pro does not have an extended bolt on the extruder. ☹️ So I can't use a filament knob.
I just got the ender 3 pro last week and found mine to be the same :/
That filament guide isn't good. Friction will make it so it's uneven. Ball bearing devices are much smoother.
you put the base plate under the LCD in backwards
My Ender Pro 3 has developed a PROBLEM. When a print job is initiated...the Nozzle temperature now defaults to 240C instead of the original 200C. HOW CAN I FIX THIS???????????????????????????????
Have you tried updating its firmware?
where did you get the STL files of Creality ender 3 pro parts to therefore design your own upgrades ? Do you mind sharing your resources as I didn't find them
i dont know if you noticed, but print quality is really bad, this printer has much more potential. You should ditch all "upgrades" and figure out what is causing problems, printer is good on its own.
@@themblue8236 this is not slicer problem, it is physical. Cura is nice as a first slicer but prusa has way more freedom + you can run custom code to produce even more tailored .gcode
Will the new part cooling fan upgrade melt if it is printed in PLA?
Hello, yes, print with any material that is durable for heat
Ended 3 and pro uses the same parts?
It depends on the part, some parts are identical, so do a check before printing
I printed one of the drawer systems. Didn’t fit. The screws to the bed hit the back of the drawer.
Just need to take the table off and flip the screws upside down (nuts on top and button heads on the bottom) if you don't want to print it again. There is a remix of the drawer with the screw notch too if you want to print it again.
Nice Video Dude, what kind of filament is this?
Hello, thank you for your comment, it is just a green filament, nothing special :)
@@engineericly PLA? PETG? ASA? greetings from germany
@@TobiSchneider1982 pla
Hello beautiful your creations but I wanted to ask you if you have any intentions in the future to make your sculptures for the Snapmaker 2.0
Modular 3-in-1 3D Printers
Hello, I would love, but I don't own that machine :(
I also used ideaMaker in the Ender 3 Pro but the Cura slicer prints much better !!!
This is one the best Ender 3 pro upgrade videos ! Time to print!
Hello, thank you for your kind comment :)
@@engineericly thank you for your work man, it’s printing as we speak))
Great video,,
I seen on thingyverse someone make a big character with the rail slots built into it so it can sit on top rail.
Problem is the actual character will take 2 days to do.
If I shrink the character down in height will the rail slots stay the same size?im a noob at this if not you know where I can look for others?thanks man
if you shrink the whole thing at once then the rails wont work, youll need to edit the file so only the character is smaller, or you could slice it so one print is just the rails at full size and the other slice is your character at reduce its size, then glue it on
see if you can make two copies of the file, where you “crop out” each shape. one with the railings and one with only the character. (i use tinkercad) and then shrink the character and line it back up with the railings again.
wow amazing
Thank you for your attention!
Very good 👍