🛩Flight footage will be in a separate video! What should I test? Freestyle, cruising, or how the quad feels? Drop your ideas below! You can also check out footage from my Mark5 here: th-cam.com/video/Tj6WDQnKulQ/w-d-xo.html
Great vid. Not my type of wiring/cabling, but was prepared to have an open mind... but then the inconsistency killed me 😭😆 but love seeing how others build regardless! Keep it up!
Thank you very much. It was the first time I had ever used wiring like this. All my builds have different wiring. I'm not sure if I'll do it like this again. What do you mean by “inconsistency”?
Thank you. ~$450 Flight time: 2-5min (it depends on your flight style) range: hard to say. I have never tested it. This is also the wrong setup for long range.
Thanks! I flash the FC with the latest Betaflight version. For quick tuning, I adjust the quad through the OSD by feel. If I have more time, I use PIDToolBox and collect data with the Blackbox for a detailed tune.
Yes, I removed it to show how it works, especially if you're not using the DJI controller and have a receiver on RX1 and TX1. Whenever I include Betaflight setups in my videos, most people skip that part. But if I see more requests for it in the comments, I'll make sure to include it in future videos!
🛩Flight footage will be in a separate video! What should I test? Freestyle, cruising, or how the quad feels? Drop your ideas below!
You can also check out footage from my Mark5 here: th-cam.com/video/Tj6WDQnKulQ/w-d-xo.html
A short freestyle video would be enough for me.
For me cruising Is the best :)
No unnecessary talking, just pure building. You’ve earned a like! 👍🏻
Love my voladors and love seeing others builds with it to compare!
Great vid. Not my type of wiring/cabling, but was prepared to have an open mind... but then the inconsistency killed me 😭😆 but love seeing how others build regardless! Keep it up!
Thank you very much. It was the first time I had ever used wiring like this. All my builds have different wiring. I'm not sure if I'll do it like this again.
What do you mean by “inconsistency”?
dronebuilding asmr.. very soothing :)
Such a nice build 🎉
this year ill build my own drone
tbs sorce 1 v5/ speddybee v4 stack / foxeer reper extreme 2.5w / Xing e pro motor/ratel 2 / foxeer lolipop 4 / 6S TATTU 1400mha/ gemfan huricane 5.2;3,6/ happymodel Ep1 dual//// < reate my shopping list
Do you already have goggles?
@ yes , and a radio master boxer
Nice video, Bro. I like it
Thank you!
That's exactly what I need after New Year's Eve. It's really relaxing to watch you.
Nice build bro. 👍
Your voice wase asmr
I recommend grinderino still.
But why was it so relaxant ? Thanks !!!
I really liked the video.
very cool and varied without a voice, although I like both.
👍🏻 👍🏻🎉
Amazing job, awesome this is, please let me know what total cost of materials and what is range and flight time of this particular built?
Thank you.
~$450
Flight time: 2-5min (it depends on your flight style)
range: hard to say. I have never tested it. This is also the wrong setup for long range.
Joshua bardwell would be proud
Great video and just the frame I want to build too. How do you set it up in Betaflight, just drop a preset PID tune on it?
Thanks! I flash the FC with the latest Betaflight version. For quick tuning, I adjust the quad through the OSD by feel. If I have more time, I use PIDToolBox and collect data with the Blackbox for a detailed tune.
Hi, if i would like to use dji controller i just need to not plug the elrs transmitter ?
Btw nice build ❤
Exactly, if you want to use the controller, you need this wire.
Which background music are you using? Cause it reminds me of a game "The last day on Earth" by @kefir
The song is called “drifting at 432 hz”
Removed sbus for demo? Im slow....idk
What about the next part.....betaflight setup and all
Yes, I removed it to show how it works, especially if you're not using the DJI controller and have a receiver on RX1 and TX1. Whenever I include Betaflight setups in my videos, most people skip that part. But if I see more requests for it in the comments, I'll make sure to include it in future videos!
I would like to buy the same frame, so with 03 will props be seen on camera?
Yes, you can see the props in the camera
@fpv-geek gotchu, bro, do you have telegram messenger?
Nope, but you can write to me on instagram
@@fpv-geek okk
Nice build video! And could we all just take a moment to admire those well kept fingernails? lol.. I'm joking and really good job on this!
Haha, thanks a lot! Gotta keep the nails on point for the build shots, right? 😂 Glad you enjoyed the video!
nice build i built the same frame but i used xt30 instead of xt60 a little bit of a weight reduction
Thank you!
If all my batteries weren’t XT60, I might have gone for an XT30 as well.
Hi man, great video , could you tell me the name of your electric scewdriver please?
Thank you!
Vastar electric screwdriver
I'm afraid to power the drone with a lipo because during my first build my esc burned and I don't know how to stop being afraid.
Did you insert the capacitor?
@@mlisb0n yes
Did you use a Smoke Stopper? It’s a great way to protect your components and ease your mind when powering up for the first time!
@@fpv-geek No, but today i continued it and it works perfectly just i have to order the dji goggles 2 and i can fly with my first 5''
Hey th-cam.com/video/xZmtsxbUQKg/w-d-xo.html what filament is it? colors is it?
tropical mix tpu
@@fpv-geek thanks :)
che zozzeria!!! una pulta
All of weight is still over 250
Yeah, unfortunately. To get under 250g, you'd have to strip quite a bit. But for me, staying under 250g isn't a priority.
Your voice wase asmr
Joshua bardwell would be proud