Hi, something strange happened to me, I recorded my mix from cubase to wing USB, when I listened to it again it was mono, yet before doing the mixdown I felt all stereo and open, even the wing's vectroscope on the main main out displayed the open and stereophonic mix, why am I wrong? Thank you
@@btsipsheim First of all thank you for the tutorials you are sharing also because we use the same Daw Regarding the USB issue, in the meantime I solved it! I had not activated the main outputs on Usb rec Now I record in wet without problems! However, I take this opportunity to ask you another 3 questions 1) If Wing has only 48 in and 48 out via usb to be able to do a virtual mix, as I do if my Cubase 11 project has 70 tracks, even if I create them on Cubase then in the Wing as I route the signals to make a virtual mix, is there a way to do this or specific hardware to overcome this limit? 2) How can I create a group like in Cubase (example Drum, Bass etc ....), I have created DCAs which I think are the same as Cubase's VCAs, but in these you cannot insert effects I would like to create a group of drums to insert a compressor to do for example a New York compression 3) Is there a way to hear before or after the mix done, like for example the bypass on the cubase console, a before and after Dry / Wet or Wet / Dry? If I want to ask you other questions where can I send them? I can't wait for you to release the other installment of how to mix with Wing Thanks so much
@@ciccio7239 Hi, send your questions to info@bastistonservice.de. Here are your answers: 1) A possible way would be, to connect cubase to the WING by using DANTE. Then you get 64x64 channels. But you have only 48 channels at WINGs surface. So you can't route all sources to a channel at the same time. 2) Use the Bus-Groups as Subgrous. In my Video th-cam.com/video/_7asnoe65FI/w-d-xo.html I show how to create. 3) Yes, there are various options. You can change the tab of your listing bus, you can change the solo mode or you can listen to a band solo at the equalizer. It's also possible to bypass the whole effect chain of a channel.
Hallo Basti, schönes Tutorial wieder, lass dich von Behringer ordentlich bezahlen ha ha. Habe dein Workflow mal bei mir auf der Wing übernommen und bin gut gefahren. Wie kann man die Recordlautstärke im USB Recorder einstellen. Wollte das Mainsignal auf Stick aufnehmen aber komme nicht weiter als -12db ohne die Abhörlautstärke zu erhöhen. Beim X32 konnte man das im USB Recordermenü.
Hallo Dirk, ich hab eben mal geschaut: Aktuell kann man das Level, das in den USB Recorder geht, nicht mehr ändern. Ich würde dir empfehlen entweder getrennte MAINs für Recorder und Mix zu verwenden, oder nochmal über eine Matrix zu gehen. Gruß
Thanks for the video.
Hi, something strange happened to me, I recorded my mix from cubase to wing USB, when I listened to it again it was mono, yet before doing the mixdown I felt all stereo and open, even the wing's vectroscope on the main main out displayed the open and stereophonic mix, why am I wrong?
Thank you
Hi, thats very hard to say. There are more opportunities for error with along the signal chain. Sorry...
@@btsipsheim First of all thank you for the tutorials you are sharing also because we use the same Daw
Regarding the USB issue, in the meantime I solved it!
I had not activated the main outputs on Usb rec
Now I record in wet without problems!
However, I take this opportunity to ask you another 3 questions
1) If Wing has only 48 in and 48 out via usb to be able to do a virtual mix, as I do if my Cubase 11 project has 70 tracks, even if I create them on Cubase then in the Wing as I route the signals to make a virtual mix, is there a way to do this or specific hardware to overcome this limit?
2) How can I create a group like in Cubase (example Drum, Bass etc ....), I have created DCAs which I think are the same as Cubase's VCAs, but in these you cannot insert effects
I would like to create a group of drums to insert a compressor to do for example a New York compression
3) Is there a way to hear before or after the mix done, like for example the bypass on the cubase console, a before and after Dry / Wet or Wet / Dry?
If I want to ask you other questions where can I send them?
I can't wait for you to release the other installment of how to mix with Wing
Thanks so much
@@ciccio7239 Hi, send your questions to info@bastistonservice.de. Here are your answers:
1) A possible way would be, to connect cubase to the WING by using DANTE. Then you get 64x64 channels. But you have only 48 channels at WINGs surface. So you can't route all sources to a channel at the same time.
2) Use the Bus-Groups as Subgrous. In my Video th-cam.com/video/_7asnoe65FI/w-d-xo.html I show how to create.
3) Yes, there are various options. You can change the tab of your listing bus, you can change the solo mode or you can listen to a band solo at the equalizer. It's also possible to bypass the whole effect chain of a channel.
Hallo Basti, schönes Tutorial wieder, lass dich von Behringer ordentlich bezahlen ha ha. Habe dein Workflow mal bei mir auf der Wing übernommen und bin gut gefahren. Wie kann man die Recordlautstärke im USB Recorder einstellen. Wollte das Mainsignal auf Stick aufnehmen aber komme nicht weiter als -12db ohne die Abhörlautstärke zu erhöhen. Beim X32 konnte man das im USB Recordermenü.
Hallo Dirk, ich hab eben mal geschaut: Aktuell kann man das Level, das in den USB Recorder geht, nicht mehr ändern. Ich würde dir empfehlen entweder getrennte MAINs für Recorder und Mix zu verwenden, oder nochmal über eine Matrix zu gehen. Gruß