What’s awesome is when you spend a weekend tearing it down then putting it back together only to realize the lower bracket is on backwards so you get to do it again.
Do you do a package deal ?? Or promo codes one of Shock Therapy videos lead me here... I wanna get the gusset kit and shock tower and bushings but want to keep my whole front end all TMW
Yes the gusset kit does work with thw TMW CanAm X3 pre runner front bumper. If you watch the TMW X3 prerunner bumper install video you will see them both installed together.. th-cam.com/video/VjKzo1MOXLA/w-d-xo.html
YES YOU CAN USE OEM WINCH OFF THE RC OR WITH OEM MOUNT. WE ALSO SELL A WINCH BUMPER HERE IS THE LINK tmwoffroad.com/collections/canam/products/x3-front-winch-bumper
We make a winch bumper that works perfect with our bulk hand kit.. Here is the link www.tmwoffroad.com/collections/canam/products/x3-front-winch-bumper
Great Video, really learned a lot. Can you guys offer any advice on removing, or especially re-installing, the ball Joints? I noticed you used the dead blow to get the 1 side off but really didn't talk about them, it seems this would be 1 of the more difficult parts of the job. Any specific tool recommendations or regular techniques you use would be really appreciated, thanks keep up the great work!
Thank You for this install video! The video was thorough enough that you convinced me that it's easy enough for me to do myself I recently ordered one of these off of the internet from SuperATV, they sent me a gusset kit that looks like this but it is stamped HCR. Did HCR recently buy out your gusset kit design?
Just put 5000 miles on my 2021 can am x3 in one year. Glad I put your gusset kit, shock tower brace and front bumper. Time for new bushings.
I installed this kit on mine and i love it. Also did the shock tower brace as well. Seems super solid now. You wont be disappointed..
Did you guy’s re used the wear plates?on the a arms?
No we do not re use the wear plates most are damaged and cause damaged and start eating up the bushings..
What’s awesome is when you spend a weekend tearing it down then putting it back together only to realize the lower bracket is on backwards so you get to do it again.
That is no fun hopfully the instrcutional video was helpful?
sorry you have more work to do...
@@tycorhino1 Everything is good now, certainly a well built strong kit. imo the best out there.
@Daniel B yes use stock torque spec and Blue Loctite
Did you have cut any part or modify anything to get the lower mount in?
Great video, will be ordering this as well as the bumper as soon as we take delivery of our new 2022 XRS RR
hopefully you get yours soon most guys waiting for ever for the 2022
Do you do a package deal ?? Or promo codes one of Shock Therapy videos lead me here... I wanna get the gusset kit and shock tower and bushings but want to keep my whole front end all TMW
Do you have to remove the bulkhead if you ever need to remove the lower a arms,since the rear of the bottom a arms use the factory bolts?
No the bulk head can stay in place when you remove the A-arms. But the lower rear gusset piece will come off and on with the lower A-arms ..
does this work with the can am "prerunner" bumper? i also have a winch.
Yes the gusset kit does work with thw TMW CanAm X3 pre runner front bumper. If you watch the TMW X3 prerunner bumper install video you will see them both installed together.. th-cam.com/video/VjKzo1MOXLA/w-d-xo.html
What is the recommended torque lb-ft for each of the a-arm bolts?
Can you still add a winch with that kit on?
YES YOU CAN USE OEM WINCH OFF THE RC OR WITH OEM MOUNT. WE ALSO SELL A WINCH BUMPER HERE IS THE LINK tmwoffroad.com/collections/canam/products/x3-front-winch-bumper
Install video for the rear gusset plate?
Does anyone make a bulkhead bumper with winch plate ?
Or can I just mount any bumper to the after market bulkhead
We make a winch bumper that works perfect with our bulk hand kit.. Here is the link www.tmwoffroad.com/collections/canam/products/x3-front-winch-bumper
How much do you guys charge to install these?
$599 labor to install
@@tycorhino1 I believe u guys are in SoCal?? not too far I might need u guys to install mine
I'm busy busy. I got the parts
@@monstermind4286 we are in Mesa AZ but we are happy to install
Does it work with the 2019 can am RC turbo R with the winch mounts ?
Will the bulkhead kit work on a '19 XMR with a winch/winch bumper?
Yes this will work with all X3 models XRS, XMR and RC with or with out winch bumpers.
To bad Can Am doesn’t build the machine right the first time:(
Great Video, really learned a lot. Can you guys offer any advice on removing, or especially re-installing, the ball Joints? I noticed you used the dead blow to get the 1 side off but really didn't talk about them, it seems this would be 1 of the more difficult parts of the job. Any specific tool recommendations or regular techniques you use would be really appreciated, thanks keep up the great work!
I also would like to know. I plan on installing the kit soon.
What floor jack is that
Pro Eagle
So if the holes are all whopped out, how do you properly align the plate before drilling?
If its that bad sometimes you need to break out the tape measure and make sure you get Bulkhead centered before drilling.. Hope this helps
Nice video. What kind of wheel setup is that?
What size tires?
these were 35" Tensor tires
Great video. Definitely not buying an X3🤣 $35k don't get you much these days.
Thank You for this install video!
The video was thorough enough that you convinced me that it's easy enough for me to do myself
I recently ordered one of these off of the internet from SuperATV, they sent me a gusset kit that looks like this but it is stamped HCR.
Did HCR recently buy out your gusset kit design?
We make them for HCR and put there name on them.. They wanted a Private label set up. Great company Love HCR..
!
~