Budget Chevy Nova Engine Install

แชร์
ฝัง
  • เผยแพร่เมื่อ 29 ต.ค. 2024

ความคิดเห็น • 71

  • @Godsy_Garage
    @Godsy_Garage 2 ปีที่แล้ว +2

    Nice Brother !! I just put my Engine in my Nova too!! :)

  • @after5auto133
    @after5auto133 2 ปีที่แล้ว +3

    It’s really hard to build a car and work a full time job. Mine has taken me a year, but it’s almost done. Great video John

  • @itseithergonnaworkoritaint7852
    @itseithergonnaworkoritaint7852 2 ปีที่แล้ว +1

    You got a lot done in roughly 15 minutes and made it look WAY to easy! LOL Good job.

  • @gatorunleashed275
    @gatorunleashed275 2 ปีที่แล้ว +1

    I did part of this yesterday and the rest here in a few minutes, good stuff.

  • @twistedjeeper1
    @twistedjeeper1 2 ปีที่แล้ว +1

    Glad to see you back at it consistently.

    • @Shop209
      @Shop209  2 ปีที่แล้ว +1

      Thanks! I’m trying to get a lot more out.

  • @Charlie_Prinz
    @Charlie_Prinz 2 ปีที่แล้ว +1

    Awesome video. Someone is going to get a super cool project Nova !!!!

  • @joe-hp4nk
    @joe-hp4nk 2 ปีที่แล้ว +2

    We use to just stick a styrofoam coffee cup in the back of the trans to keep it from leaking. Also I use 50psi fuel hose for my trans lines. A lot easier to feed it through the chassis. But it's not stock appearing.

    • @Shop209
      @Shop209  2 ปีที่แล้ว

      Yeah. I have a set of transmission plugs but there’s only a little fluid in it so I wasn’t too worried.

  • @SurlyMike
    @SurlyMike 2 ปีที่แล้ว +1

    Looking good now.

  • @juanpalos3657
    @juanpalos3657 2 ปีที่แล้ว +1

    One step closer to getting it sold my friend… excellent work like always . You sure do make it look easy big shout out to you from Mexico buddy.

  • @edsmachine93
    @edsmachine93 2 ปีที่แล้ว +1

    Your car is coming together.
    Always amazing when the engine goes in it seems like half of the battle is won. Will be nice to hear it run.
    Take care, Ed.

  • @ripnliptightlines5092
    @ripnliptightlines5092 2 ปีที่แล้ว

    Thank you! I’m not a mechanic and I’m trying to get a 350 into a 69. I needed this video.

    • @Shop209
      @Shop209  2 ปีที่แล้ว

      Awesome!!

  • @rickilynnwolfe8357
    @rickilynnwolfe8357 ปีที่แล้ว +1

    Beautiful can’t wait to hear it run

  • @fergusonfirearms473
    @fergusonfirearms473 2 ปีที่แล้ว

    It's been awesome watching you build this. My daughter and I are working on her 68 Nova and watching your videos to keep us motivated.

    • @Shop209
      @Shop209  2 ปีที่แล้ว

      Awesome! I have a lot more content coming soon!!

  • @lordsauto
    @lordsauto 2 ปีที่แล้ว +1

    Excellent John ur always helpful 👍

  • @danboutin8700
    @danboutin8700 2 ปีที่แล้ว +1

    Great video can’t wait to see more!!!! 👍🏻as always

    • @Shop209
      @Shop209  2 ปีที่แล้ว

      Thanks!!

  • @carpartsink4577
    @carpartsink4577 2 ปีที่แล้ว

    Thank you for posting these videos, they help a lot. They have guided me on some of my decisions when purchasing parts and working on my Nova.

    • @Shop209
      @Shop209  2 ปีที่แล้ว

      Awesome!! Thanks for watching.

  • @jaimecervantes3896
    @jaimecervantes3896 2 ปีที่แล้ว +2

    I wish I had the money to buy that nova. I love your videos I was wondering when you was going to work on the nova again 😁

    • @Shop209
      @Shop209  2 ปีที่แล้ว +1

      Thanks! I’m going to be working hard on it for next few weeks.

  • @hippiemiller
    @hippiemiller 2 ปีที่แล้ว +1

    Good job bro 👍👍

  • @bradstaffotd4715
    @bradstaffotd4715 2 ปีที่แล้ว +1

    Another Great video nice job 👍

  • @TonyGeneseo
    @TonyGeneseo 2 ปีที่แล้ว

    Cool ! Looking forward to that wiring harness install ! Take care John ! 🍺

  • @markbly7062
    @markbly7062 2 ปีที่แล้ว +1

    nice to see some progress.. i think i would have up graded them engine to the newer type clamshell version 1974-newer just my thoughts.. btw..keep on posting them great nova build video's !!

    • @Shop209
      @Shop209  2 ปีที่แล้ว

      Thanks. Although I didn’t think about using them the headers I’m using won’t fit with the clamshell style mounts.

  • @rockeyfranks4504
    @rockeyfranks4504 2 ปีที่แล้ว +1

    Good video as always

  • @thehoule70
    @thehoule70 2 ปีที่แล้ว +1

    Good vid 👍🏼

  • @booiedeus8539
    @booiedeus8539 2 ปีที่แล้ว +1

    Nice man👍

  • @joe-hp4nk
    @joe-hp4nk 2 ปีที่แล้ว +2

    You showed the intake before and after in a short. How did you get it cleaned?

    • @Shop209
      @Shop209  2 ปีที่แล้ว +1

      I washed and scrubbed it with purple power. Then painted it.

  • @davidwaters4044
    @davidwaters4044 2 ปีที่แล้ว

    It's always good to put a quart of atf in the torque converter before putting it in plus on the snout just a suggestion

    • @Shop209
      @Shop209  2 ปีที่แล้ว

      That converter was full. It was in my other nova until three weeks ago.

    • @davidwaters4044
      @davidwaters4044 2 ปีที่แล้ว

      @@Shop209 sorry

    • @Shop209
      @Shop209  2 ปีที่แล้ว +1

      Don’t be. I thought I mentioned it in video. Probably exited that part out. Don’t need to be teaching people wrong way. Lol

  • @dylanosterberg1439
    @dylanosterberg1439 2 ปีที่แล้ว +1

    Hey I have a question abt motor mounts. So on a 74 the research I’ve done says that I need clamshell type mounts on the frame side? But I can’t seem to find a definite answer on what to use for the motor side? Bought the car with no mounts it was originally a 6cyl and it’s going 350

    • @Shop209
      @Shop209  2 ปีที่แล้ว

      Ok. So the 73-up cars had clamshell mounts. It has a rubber frame mount with just a big metal bowl looking piece for the engine side. I’ll try to get a pic posted on my community page when I get home later.

  • @sintruder
    @sintruder 2 ปีที่แล้ว +1

    Did you forget to bolt up the converter, or was that just not recorded? Been a mechanic a long time, I almost never have the luxury of doing a motor with the front clip out of the way. LOL

    • @Shop209
      @Shop209  2 ปีที่แล้ว

      I didn’t before I put it in. Easier to have the car holding up the engine and trans while turning it. I usually wait until I have distributor installed to put converter bolts in since I set it up to TDC before I set it in car.

  • @Sams_garage284
    @Sams_garage284 2 ปีที่แล้ว

    Hey man I have looked all over TH-cam and can’t find anything on this. I have a 1977 nova 350 with 700r4 and when I put the headers on it hits the trans crossmember just wondering if you have had this problem

  • @christinar7864
    @christinar7864 2 ปีที่แล้ว

    Awesome work John. Bet it’s a pain to do all the work AND run the camera. Probably slows down the entire process.

    • @Shop209
      @Shop209  2 ปีที่แล้ว

      Thanks!! Definitely. Especially when I say something dumb and have to start over. Lol.

  • @jonathansmith875
    @jonathansmith875 2 ปีที่แล้ว

    Which rebuild kid did you get for your th350 and how much was it? Also have you tried it yet?

  • @medicinalcultivations9301
    @medicinalcultivations9301 ปีที่แล้ว

    Hey John, I'm a new subscriber and am enjoying your channel. Did you finish the budget build? Not sure if I missed something but was looking forward to the completion.
    Thanks

    • @Shop209
      @Shop209  ปีที่แล้ว

      I haven’t yet but working on it right now. Will have more videos on it in next week.

  • @MRobichaud99
    @MRobichaud99 2 ปีที่แล้ว

    Hey, great video! I own a 74 Hatchback and currently its in restoration mode. Looking forward tp when it's this far along. Also, are you looking to sell the left hand quarter panel up on the shelf?? Just wondering,, Keep up the great vids!

    • @Shop209
      @Shop209  2 ปีที่แล้ว

      Thanks! That quarter is a spare for my 73.

  • @boduke8297
    @boduke8297 2 ปีที่แล้ว +1

    Hey bud, can you put a 71 front clip and 71 tail panel on a 73 body and not tell the difference? I ask because my "buget" 71 is turning into nightmare. Found a solid 73 very little to no rust under 3gs complete

    • @Shop209
      @Shop209  2 ปีที่แล้ว

      I have a video for converting both. The quarter windows are still gonna be different though

    • @boduke8297
      @boduke8297 2 ปีที่แล้ว

      @@Shop209 ill check them out. Thanks

  • @DavidHernandez-fk1xo
    @DavidHernandez-fk1xo 2 ปีที่แล้ว

    Hey man I saw your video on the starter and I need some help Becuse my mechanics said they are not sure the motor will work is there a way you can go back to the starter motor in the nova ans reply to my comment on what I should do??

  • @clarkstone-bear7742
    @clarkstone-bear7742 2 ปีที่แล้ว

    Another great video man!!
    I have a question, iv been trying to Research it but it's geting me no where. So my 74 buick apollo has what appears to be a starter relay under the hood bolted to the firewall. I checked it, it is hot. However even with the Ignition on it doesn't start my car. And it doesn't appear to do anything. Even if I take it out there no difference. So I was wondering if you or someone here would know what it's used for. It's bolted to the firewall right above the brake Master cylinder. The relay it self I'd black, and has a rubber push button beside the word start. The bracket that it's attached to is orange. 🤷‍♂️

    • @Shop209
      @Shop209  2 ปีที่แล้ว +1

      Ok. So that is a seat belt starter interlock. One year only. It was designed to allow you to bump the starter from under the hood without the seat belt connected. Once. Lol. Then you had to reset by connecting seat belt to reset it. Or something like that.

    • @clarkstone-bear7742
      @clarkstone-bear7742 2 ปีที่แล้ว

      @@Shop209 oh.. ok! Hahaha Thanks man. I was completely stumped.

  • @jerryrichter4904
    @jerryrichter4904 2 ปีที่แล้ว +1

    cool

  • @jonscriffignano
    @jonscriffignano 8 หลายเดือนก่อน

    what kind of mounts did you use? im looking to use factory frame mounts and solid motor mounts and idk if they fit

    • @Shop209
      @Shop209  8 หลายเดือนก่อน

      I used the factory crane and engine mounts. Some of the solid mounts are really tight.

    • @jonscriffignano
      @jonscriffignano 8 หลายเดือนก่อน

      @@Shop209yeah i might try the factory steel mounts and my morosso solids hopefully they fit

  • @joeestes9172
    @joeestes9172 2 ปีที่แล้ว

    Is the automatic transmission crossmember different from the manual shift? Iam installing a 400 turbo and a 383 small block but it looks like it's to far forward? Just wondering if that's what's going on or the mounts are different. Thanks

    • @Shop209
      @Shop209  2 ปีที่แล้ว +1

      The TH400 crossmember is different than the th350/Muncie/powerglide. It is offset to the passenger side two inches as well as set back some for the transmission mount.

    • @joeestes9172
      @joeestes9172 2 ปีที่แล้ว

      @@Shop209 thanks so much I really appreciate it

  • @oldmanintheshopbuiltnotbou8726
    @oldmanintheshopbuiltnotbou8726 2 ปีที่แล้ว

    is the nova for sale ive got a friend wanting a project nova

    • @Shop209
      @Shop209  2 ปีที่แล้ว

      Yep. As soon as I get it driving I’m selling it.

  • @kjamesjr
    @kjamesjr 2 ปีที่แล้ว

    Where you find all these novas?

    • @Shop209
      @Shop209  2 ปีที่แล้ว

      They find me usually. Lol

  • @goneplatinumpaintlessdentr3102
    @goneplatinumpaintlessdentr3102 2 ปีที่แล้ว +1

    I have your money !!!!