I'm going to attempt to wrap my hood 2 different colors. Black with a carbon fiber center overlay wrap where the hood has a bump following the body lines of it. Technically my whole hood will be black with center carbon fiber. Can you make a video on something like that doing overlay with knifeless tape? I believe it will be a 3 piece job and center being the last to apply if I'm not mistaken?
This is one of those times I would use regular vinyl over wrap vinyl, it'll just last that much longer on a horizontal plane. Nice DIY though. Glad to see you doing well.
Mother just bought a mini cooper coupe and the racing strips on that one were jacked. The person who installed the silver used a razor and damaged the paint. The next person covered that with a wider blue. Sucks that they didn’t use your method. That vinyl they used was garbage. The car looks better without it. Now we have cut marks to fix.
What a great looking end result! Really enjoyed seeing that. With vinyl on vinyl are there and lifting issue or is it just as good as straight on paint? When measuring out the lines are you using anything to mark your distances or putting the tape down as you measure? Thanks for another cool video.
I have a black on black Benz amg sport and I've had it for 2 year I got about 50,000 miles hopefully going to have her for a while . Been thinking about putting a either stripe just like this one. I was wondering tho do you thing it would look better or more aggressive black with the stripe in the middle and 2 pin stripes instead of one like it shows on this video. Looks good btw I was just curious if down the middle would look better then continue it on the back And maybe some dashes on top where applicable? Also thinking of perhpas making the stripe red same description just. Solid red down the middle and 2 pin stripes running up the side ? LMK
Tape has a lower surface energy than the vinyl or paint underneath, meaning the vinyl you lay over the top won't stick as easy to the tape. Makes for easier removal of excess film.
I just wanted to thank you for providing these awesome wrap videos. If it weren't for your videos I wouldn't have been able to complete the DIY hood stripes I just did on our Durango SRT. I have to confess, I had tried to install stripes on the SRT hood without using air release vinyl and knifeless tape and both times were huge fails. This hood just has way too many compound curves. Using wrap and knifeless tape saved me on this project. It probably took me four times longer to do the job than it would have taken you but I'm really happy with the end results. Thanks again and here's a link to my DIY video th-cam.com/video/nC8RuI3aM70/w-d-xo.html
I just paid someone to put black Racing stripes and red pin stripes on my cat the red stripes is overlapping the black is this something I can just Peel off or would it affect the black Vinyl stripes?
Great series of videos, super informative for those of us trying this for the first time. But.. and maybe only because I work in video production that I see it, please turn off the auto focus or what ever is making the lens "pulse" in and out constantly. It's so distracting that I can't even pay attention. Set the shot up, focus on where you'll be and then shut auto off. Thanks again for sharing these! Edit: Only the wide shot at the beginning and end was it bad.
What happened to Christian? what did you do with him? where did you find tri-line tape in your garage...? Woah, that 3M guy really did a number on you, huh? hahah. because, well...I recall mentioning in the workshop back in July that, "I feel like you could save some time + a few measurements by just using either of the tri-lines for a bunch of different stripe sets..." and you said you'd just rather "stick to using the normal knifeless since...I dunno, tri-line just doesn't seem right to me...I'm a finish line guy..." So, good to see you finally came around to the ways of tri-line haha. Definitely seems like the 3M guy showed you a nice bundle of tips/tricks...But I gotta say, I'm a bit worried though too, I'm not gonna get a youtube notification one day to find you announcing your brand new "3M certification & 3M preferred status, and that vvivid is total meh" one of these days I hope, right? Promise me you aren't thinking about making any drastic and/or rash choices here... I'm worried about you; it's a slippery slope man. Be careful out there.....hahah but for real though, glad to see a bunch of new vids from your neck of the woods again. Hope you've been doing well! +Mike
Thanks Mike, just showing other ways to do things. There is always more than one way to wrap a car. So as I learn new things I try to share them. I've been aware of Tri line but never invested time into making a video using it. For some people using this will be easier and for others they'll stick to the ways they know. Whatever one you choose it's up to you. Tri line is a good product, it isn't necessary though. We can always achieve results using different products and techniques
@@CKWraps Haha yeah I know, just like givin you a hard time....seeing you using tri-line, never thought I'd see the day....plus obviously, mad respect to finally see a vid made about tri-line that isn't an antiquated 3M instructional vid w narration by Justin Pate, so that's a major bonus. But for real, I'm just hoping not see some vid in the near future from you that's like "HERE'S WHY I'M DITCHING VVIVID TO GO BACK TO 3M, FOREVER"....it would flip my world upside down....although it probably wouldn't reposition it after that though. .....I know you see what I did there ;) Hope everything has been good in your neck of the world!
If your not cutting put the knife down! It's a bad habit I've seen you do in a few videos. Tugging on those strings with the blade pointed at the car makes me nervous.
![ตีสิบเดย์ [FULL] | เปิดใจ "อาจารย์ เบียร์ ฅนตื่นธรรม" นักสนทนาธรรมสายดุดัน!](http://i.ytimg.com/vi/vqaBI_mnoDk/mqdefault.jpg)
takes me back this, when i started learning about wrapping, racing stripes is the 1st thing i experimented on, how to use knifeless tape, etc..
do u still do it? make money out of it?
Much respect my brudah. You made this look way too easy. Thanks alot.
You make it look so simple, can't wait to get a garage so I can do some of these things you've shown us through ur vids.
Am I the only person that thought the yellow stripe looked pretty nice on that car? 🤔
I really like it on the flat black.
No my Fren that's the one I order thanks your comment made my thoughts 100% change was thinking to get orange instead but yellow would look sick
I'm looking to pinstripe a guitar, and this video may have been what I needed to convince myself I can do it. That knifeless tape is genius.
I'm going to attempt to wrap my hood 2 different colors. Black with a carbon fiber center overlay wrap where the hood has a bump following the body lines of it. Technically my whole hood will be black with center carbon fiber. Can you make a video on something like that doing overlay with knifeless tape? I believe it will be a 3 piece job and center being the last to apply if I'm not mistaken?
This is one of those times I would use regular vinyl over wrap vinyl, it'll just last that much longer on a horizontal plane. Nice DIY though. Glad to see you doing well.
Looks sharp! Thanks for posting!
Does the customer tell you what he wants or where he wants tje lines or you help them decide ?
What makes that easy peel stripe stick to car so it doesn’t fly off in high wind?
Awesome video man, I’d really like to see you do an intricate printed wrap in the future👍
What kind of black colour ist that Mercedes??? I like it
How long will it last?
With wear and tear +washing
Mother just bought a mini cooper coupe and the racing strips on that one were jacked. The person who installed the silver used a razor and damaged the paint. The next person covered that with a wider blue. Sucks that they didn’t use your method. That vinyl they used was garbage. The car looks better without it. Now we have cut marks to fix.
Which single filament tape do you think is better the design line or the finish line?
Design line has a cleaner cut
Finish line is stronger
What a great looking end result! Really enjoyed seeing that. With vinyl on vinyl are there and lifting issue or is it just as good as straight on paint?
When measuring out the lines are you using anything to mark your distances or putting the tape down as you measure?
Thanks for another cool video.
You can use a crayon to mark the spot. It will wipe off easily as long as you don't push too hard
Does this affect the paint job after time?
I have a black on black Benz amg sport and I've had it for 2 year I got about 50,000 miles hopefully going to have her for a while .
Been thinking about putting a either stripe just like this one.
I was wondering tho do you thing it would look better or more aggressive black with the stripe in the middle and 2 pin stripes instead of one like it shows on this video.
Looks good btw
I was just curious if down the middle would look better then continue it on the back
And maybe some dashes on top where applicable?
Also thinking of perhpas making the stripe red same description just. Solid red down the middle and 2 pin stripes running up the side ?
LMK
What is the point on the yellow tape?
You don't have to hit it with some heat?
I'm a DIY'er learning how to do this. thnx for the vids.
Tape has a lower surface energy than the vinyl or paint underneath, meaning the vinyl you lay over the top won't stick as easy to the tape. Makes for easier removal of excess film.
Bro this masking tape you use is paper? 🤔
Big hug from Portugal... 👍🏼👌🏼😉🙂🙏🏼📿
where can i get the triline tape? your link its not getting me there. Thanks
I have to learn many things about car design/tuning...
I just wanted to thank you for providing these awesome wrap videos. If it weren't for your videos I wouldn't have been able to complete the DIY hood stripes I just did on our Durango SRT. I have to confess, I had tried to install stripes on the SRT hood without using air release vinyl and knifeless tape and both times were huge fails. This hood just has way too many compound curves. Using wrap and knifeless tape saved me on this project. It probably took me four times longer to do the job than it would have taken you but I'm really happy with the end results. Thanks again and here's a link to my DIY video th-cam.com/video/nC8RuI3aM70/w-d-xo.html
Can I use Avery HP750 on my car?
Does all vinyl wrap have orange peel or is it mainly gloss??
What is proper size roll to get to do stripes on a Dodge Charger? I want to make sure I have enough the first time.
I just paid someone to put black Racing stripes and red pin stripes on my cat the red stripes is overlapping the black is this something I can just Peel off or would it affect the black Vinyl stripes?
If they're laid on top then it should remove. You will have to be cautious so that you don't damage or accidentally remove the black ones.
This rocks!
mine wrinkled in the edges where knifeless tape was… why would that happen?
How long will it last before replacing?
Superb work man, keep it up.
is the vehicle wrapped? if so was it xpel stealth or matte black vinyl?
thanks
It's wrapped in satin black
Looks awesome mate....cheers
What did you do to that car that makes it look like that?
How do you avoid wrinkles when wrapping around say the bottom of a wheel well?
relief cuts
I’d like to see that in yellow
The yellow masking tape looks better than the black. lol
Amazing 😍😍😍😍😍
Great series of videos, super informative for those of us trying this for the first time. But.. and maybe only because I work in video production that I see it, please turn off the auto focus or what ever is making the lens "pulse" in and out constantly. It's so distracting that I can't even pay attention. Set the shot up, focus on where you'll be and then shut auto off. Thanks again for sharing these!
Edit: Only the wide shot at the beginning and end was it bad.
Wow u make it look easy lmao
Knifeless tape always gives me problems lol. They hate us.
Nice
Good
so easy 15 people missed the like button
请问 绿色的那卷是什么？
3m knifeless tape
Nice Movado
I thought the yellow tape was the stripe 😭
Kim
What happened to Christian? what did you do with him? where did you find tri-line tape in your garage...? Woah, that 3M guy really did a number on you, huh? hahah. because, well...I recall mentioning in the workshop back in July that, "I feel like you could save some time + a few measurements by just using either of the tri-lines for a bunch of different stripe sets..." and you said you'd just rather "stick to using the normal knifeless since...I dunno, tri-line just doesn't seem right to me...I'm a finish line guy..." So, good to see you finally came around to the ways of tri-line haha. Definitely seems like the 3M guy showed you a nice bundle of tips/tricks...But I gotta say, I'm a bit worried though too, I'm not gonna get a youtube notification one day to find you announcing your brand new "3M certification & 3M preferred status, and that vvivid is total meh" one of these days I hope, right? Promise me you aren't thinking about making any drastic and/or rash choices here...
I'm worried about you; it's a slippery slope man. Be careful out there.....hahah
but for real though, glad to see a bunch of new vids from your neck of the woods again. Hope you've been doing well!
+Mike
Thanks Mike, just showing other ways to do things. There is always more than one way to wrap a car. So as I learn new things I try to share them. I've been aware of Tri line but never invested time into making a video using it. For some people using this will be easier and for others they'll stick to the ways they know. Whatever one you choose it's up to you. Tri line is a good product, it isn't necessary though. We can always achieve results using different products and techniques
@@CKWraps Haha yeah I know, just like givin you a hard time....seeing you using tri-line, never thought I'd see the day....plus obviously, mad respect to finally see a vid made about tri-line that isn't an antiquated 3M instructional vid w narration by Justin Pate, so that's a major bonus. But for real, I'm just hoping not see some vid in the near future from you that's like "HERE'S WHY I'M DITCHING VVIVID TO GO BACK TO 3M, FOREVER"....it would flip my world upside down....although it probably wouldn't reposition it after that though. .....I know you see what I did there ;)
Hope everything has been good in your neck of the world!
wtf......
All that noise in the back. Damn
this trick without plotter wastage of vinyl i can see vinyl pieces wastage not a good idea
Black stripes on a black car.
If your not cutting put the knife down! It's a bad habit I've seen you do in a few videos. Tugging on those strings with the blade pointed at the car makes me nervous.
Great work as always but don’t like it
Just paint,looks amateur
Wow u make it look easy lmao