@lmfscrew yep DT shocks still has some in stock, one of the best upgrades i did. - doetsch-shocks.com/collections/lift-kits-1/products/ford-f150-2wd-2-to-3-lift-upper-control-arms-1997-2003-pair?variant=32232258863190
Very nice truck and a very good job that you did when lifting the truck, it looks more perona, now change the tapestry of the awning so that it looks more presentable inside
Looking good! Simple clean...... Hey was wondering if you could make a vid on larry's headliner.. like reaplace the fabric. Like what's the best glue an how to apply it
hey man ik this is a old video, but i have an 02 f150 with a lean like this, i just have coil spacers stacked atm, im planning on taking one off on each side. my question was were u able to get an alignment after doing this?
You think a 2in spacer wouldn’t affect a body lift even thou you got a 3in spindle lift??? Because IF I purchase the 2in spacers I would be going from 6in to 8in. Or would I have to buy something else to help those spacers out???
Looks good. I don’t care for the squatted look but that’s just me. I had two of the tenth generation Fords and they are good trucks. I met a guy who had 550,000 kms his with the 4.0 L engine ! Good video !
I have the same truck with the same lift but my clearance is different than yours. I have 8 1/4 from tire to fender and only 18 1/4 from the ground to the bumper. I wonder if it’s your rims and tires that make it taller than mine?
Hey man I need some help I've been watching your videos for a while and the same setup you put on this truck from the beginning I did to mine but I don't know if I'm having trouble with the ball joint angles if it's right or they are wrong can you please help me to fix the problem
I bought some 2.5" spacers and now can't find a shop to put them on. One shop told me spacers don't work on these model trucks because you can never get the alignment right after that. I called bs and went to a different shop and they said yeah the spacers will work but I need new shocks. That makes sense because it will be taller and the shocks on there aren't that tall. I don't have a lift on it, just want to level it.
Literally made my night, I was watching your video earlier when you reveiwed the spindles, and I was hoping you would put some puks in and here we go😅😅
Loving the GMC, really really nice truck. I want to see cold air intake, exhaust and maybe different wheels and tires. Love your content. Keep up the great work.
I just added the spindle lift 3inch and want to go higher and go with 2 inch coil springs, will you need to add longer shocks if I were to go that route?
I was gonna get the same 2in lift to put on my truck so it would level my truck. But people are saying it won’t fit a 2wd supercrew. If it fits a Supercab why would it not fit supercrew
I have a 2003 f150 RWD and have done 3.5 spindle lift a 1.5 spring spacer, total 5in lift. Replaced the upper control arms with factory replacements and no having trouble with tires toed in at the top. Camber is maxed out of adjustment. What did you do to get your alinement correct? Can’t find longer control arms for lifted 2003.
Be careful now driving it with those UCA's at that angle because the upper ball joints will be trash soon and possibly brake while driving it. Raise the rear end up to and make it level.
Take a yellow or any bright sharpie next time with springs and mark where it’s at the first time then put it back in the same spot so u don’t have to move it
Larry got free tire shine in the beginning 😅
Put a chrome grill it would look amazing
Just the inserts
Agreed
I like how Larry is now 💯
Needs lift upper control arms to fix the ball joint angles
@lmfscrew yep DT shocks still has some in stock, one of the best upgrades i did. - doetsch-shocks.com/collections/lift-kits-1/products/ford-f150-2wd-2-to-3-lift-upper-control-arms-1997-2003-pair?variant=32232258863190
Love Larry, you should definitely get a sound system for it
Larry needs pa’s and subs bad
@@jonathanduncan9684 compression drivers and subs
put blocks in the back it’ll look so good
Yes yes yes
boyshutyobitchassup
0:14 dog pissing on the wheels and tire😂
Headliner and stars for larry would be sick
Fix the headliners now
This was my first truck at 16 and I did mine before TH-cam how-to videos were a big thing. It’s very easy in these trucks
Merry Christmas man. You helped me and my friends out with your install videos keep it up!
Leave it sqautted looks dope Larry is perfect
And Larry deserves some headliner come on now
Very nice truck and a very good job that you did when lifting the truck, it looks more perona, now change the tapestry of the awning so that it looks more presentable inside
god i love this truck, nothing like a this generation ford, im a dodge fan but these fords have a special place in my heart🤣
I dont think any changes need to be made, Larry is looking great! Nice job brother 👍
Hahahaha, I like the truck names. I have a powerstroke I call George, a cummins named Frank, and a mustang named Sally.
I think you should install the rear blocks
It would look a lot better in my opinion
A bigger lift on Larry is so sick. Love the content man keep it up!
Truck looks killer man glad that you can show how to make something out of an older truck
Oh yesssss this is what Larry needed!
Larry looks perfect!
Even the dog didn't like the half-lift. LOL
Did you have any camber in the driver side I can’t seem to get my wheel straight
Looking good! Simple clean...... Hey was wondering if you could make a vid on larry's headliner.. like reaplace the fabric. Like what's the best glue an how to apply it
That roof panel looks like it got in a fight with a raccoon
hey man ik this is a old video, but i have an 02 f150 with a lean like this, i just have coil spacers stacked atm, im planning on taking one off on each side. my question was were u able to get an alignment after doing this?
sorry the shock absorbers are the original ones or did you change them for longer ones
You think a 2in spacer wouldn’t affect a body lift even thou you got a 3in spindle lift??? Because IF I purchase the 2in spacers I would be going from 6in to 8in. Or would I have to buy something else to help those spacers out???
Larry do be lookin clean
Leave it how it is now , looks great !!
Perfect amount of lean Larry is dumb clean keep up the great work
Looks better this way,🎉🎉
Looks good. I don’t care for the squatted look but that’s just me. I had two of the tenth generation Fords and they are good trucks.
I met a guy who had 550,000 kms his with the 4.0 L engine !
Good video !
I have the same truck with the same lift but my clearance is different than yours. I have 8 1/4 from tire to fender and only 18 1/4 from the ground to the bumper. I wonder if it’s your rims and tires that make it taller than mine?
Tha'd be my guess
im really wondering if there are any aftermarket upper arms to relieve some of that upper ball joint stress
Same
Why do all those body styles have a dent in the middle of the front bumper? My 02 king ranch does and my older 98 and 00 had it also
Satisfied with Larry now 😂
Looks a lot better
Hey man I need some help I've been watching your videos for a while and the same setup you put on this truck from the beginning I did to mine but I don't know if I'm having trouble with the ball joint angles if it's right or they are wrong can you please help me to fix the problem
I bought some 2.5" spacers and now can't find a shop to put them on. One shop told me spacers don't work on these model trucks because you can never get the alignment right after that. I called bs and went to a different shop and they said yeah the spacers will work but I need new shocks. That makes sense because it will be taller and the shocks on there aren't that tall. I don't have a lift on it, just want to level it.
might get a 4 inch one to stack with a 3-4 inch suspension lift later on. do you need new shocks with the spring spacer lifts?
I can put I 3.5" Lift Front Spindle and I 3 inch coil spacer at the same time without change the control arms ?
Cuestion, How much money did you spend in parts,and how many hours of labor,?
installing my spacers today do you need new cam bolts for the spacer or no
Literally made my night, I was watching your video earlier when you reveiwed the spindles, and I was hoping you would put some puks in and here we go😅😅
Looks good man. Larry is just TOUGH now
How is your upper control arms mine is bent pretty bad same set up with spindle
Larry looking good man leanin pretty hard really like it man
Just out of curiosity why did u go spacer instead of a full leveling coil spring
What kind of upper control arms do you have. My 99 expedition has a 2 inch spring lift and 3.5 spindle lift but the arms sre almost not long enough
Debadge larry!! Keep up the awesome vids
Rear lift and some ford replicas would look sick
I love larry
Why did u add that spacer? It looks like it just added more pressure to the springs i dnt think that help with the height
Loving the GMC, really really nice truck. I want to see cold air intake, exhaust and maybe different wheels and tires. Love your content. Keep up the great work.
Where did you get the spiked lugs for those wheels?
Should be from custom offsets but if its not and you’re looking for some check out custom offsets 👍🏼
I got mine from amazon
@@owenpullen6356 nice, either is fine I got mine from custom offsets, just a matter of looking around 👍🏼👍🏼
@@mannyon24s74 that’s where I got mine they were $59 for mine
@@buddyrouse3439 pretty cheap mod but makes a nice difference
😳...why does it look like Freddy Krueger went ape shit on the headliner?
Is the top of the spring housing supposed to go in the top of the spacer itself?
I’m looking for front shocks for my 2000 f150 same lift what model are they
I just added the spindle lift 3inch and want to go higher and go with 2 inch coil springs, will you need to add longer shocks if I were to go that route?
Yessir, you finally did it lol. I have the coils but I’m sure the spacer will be better with your setup
I was gonna get the same 2in lift to put on my truck so it would level my truck. But people are saying it won’t fit a 2wd supercrew. If it fits a Supercab why would it not fit supercrew
I think the tire rubs.
I have a 2003 f150 RWD and have done 3.5 spindle lift a 1.5 spring spacer, total 5in lift. Replaced the upper control arms with factory replacements and no having trouble with tires toed in at the top. Camber is maxed out of adjustment. What did you do to get your alinement correct?
Can’t find longer control arms for lifted 2003.
Following
Just put a 3in spacer coil spacer and camber bolts on my 2000 f-150
How u get the camber straight
@@trevormock5105 camber bolts off Amazon
Leave Larry looks good
What size bore is are flake reps and how do I find the right adapters and bore rings?
I'm doing the 3 inch spindles and coil spacers on my gmc sierra would I need long shocks?
Are those flakes if not what are you running rim and tire?
man , those wheels look lovely! you got ole lare lookin rite , bring the back up a couple inches an hell be MINT!!
What wheels are those? They look pretty good on there!
Looks good leaning like that
Yes yes yes. 😍😍
Did you have to change your break lines?
Looks good 👍
What did you do to get it from leaning I did the same to mine and I got that problem too
Keep it like that it look good
Where can i find for the obs because we have the same truck and i don’t want to buy a new lift kit
I have a 7.5 inch rough country lift could I add extra lift to that make it about 10inches of lift??
Be careful now driving it with those UCA's at that angle because the upper ball joints will be trash soon and possibly brake while driving it. Raise the rear end up to and make it level.
So good! I’d like to see how it looks with lift blocks but the lean is perfect! Bet the 22x12s would look a lot better on it now too
Quick question, did you remove the factory foam piece that belongs on top of the coil?
I left mine in! My spacers came from Torch Offroad! 03 F150 V6 5spd reg cab shortbed, oh and 2wd lol!
should i just get torsion keys for my cateye or should i just buy a whole lift?
I love it
Please tell me what rims and tires you have they look really really nice
Headliner needs to be redone now
Hey bro how much do spend on all you did in your truck?
Try it out with the rear blocks for s&g
I have a Silverado 2wd sitting on a 4” readylift. Thinking about adding a 3” spindle to reach 7” any suggestions?
Love your channel 🤙🏼
Leave it leaning like that it looks good
LLLAAARRYYYY MEANNNN
Leave it like it is
What brand of whip antenna is on ole Larry?
How close were they able to get your alignment?
Did u have alignment issues too? I think I got 98% alignment
Are you going to get another diesel truck? The Duramax you sold last year was very clean.
Take a yellow or any bright sharpie next time with springs and mark where it’s at the first time then put it back in the same spot so u don’t have to move it
did you have to get an alignment after wards?
Did you run into any alignment/control arm issues stacking like that?
Ball joints wear way faster
I just blew my 5.4 up in desert this week, busted valve. Time for remanufactured engine soon.
You should throw a billet grille insert on Larry and Earl
I’m about to put the same lift kit you got on my 2000 f150 2w