L…A…R…R…Y…!!! He looks absolutely incredible, been a long time and I’m so glad Larry finally has his lift! I say 37s with a 10-12 wide at max but I would love any old school look as you mentioned!! Keep up the amazing work!👍
Larry looks sick! Definitely 2inch spacer in rear and swap the grill and front bumper from Big Red. Then 37 Grapps on 03 f150 FX4 stocks, or 24x14's on 35's!
Recently just bought a 2005 crew cab Silverado with a 5.3 in it and I love to see chomper content gonna have to go back and look at what u did love the videos keep it up
Just throwing this idea out there. I think you should do a giveaway with Larry after you get it completed! 🤷🏽♂️ 25-50 dollar mystery boxes one box has the keys. That would be pretty cool.
I say do an old school style look. I think all the options you said would be sick. But I think some 16x12 or 16x14 or even a 16x10 and go really big on tires would look sick
16:43 could be camera angle but it kinda looks like the rear axle ain’t centered in the opening just figured id mention it bc it could cause issues when you go to a big boy tire. I know some lift blocks have off center alignment pins. Larry looks dope btw keep ‘em coming.
For future reference it’s a lot easier to lift the truck from the rear diff, undo the u-bolts then take two pieces of wood (like the one you stacked on the jack but bigger) and put them under the leaf springs on each side of the wheel hub then lower the truck onto those blocks it will then separate the space you need to remove the old block and replace with new one then Jack the axle back up to put ubolts back in. ALWAYS jack the truck from the rear diff when changing blocks and do one side at a time it will avoid messing up rear alignment.
Do you have aftermarket control arms on as of when you put the lift on??? Tried to put coil overs on my 2000 2wd and it wouldn’t clear with my stock uppers.
I went with the 5” lift but my wheels have negative camber and are adjusted to the max they can go, did u do anything about it? Change upper control arm?
16s and 38" mud grapplers on old Larry! Keep it classic with the late 90s early 2000s.
Yea that’s the only way to go hope he does that
I agree!
And not that gangster shit
Time to put some 37 mud grapps on it now
38x15.50 graps!!
Only on 24 foes 😂
Hell no he already did mud grapplers you idiots
38x15.50
Nah wides
Definitely should do the bullet holes and mud graps bc they go so well with the look of the 10th gens
Larry lookin hard!!!
Love the idea of 37s and bulletholes
L…A…R…R…Y…!!!
He looks absolutely incredible, been a long time and I’m so glad Larry finally has his lift!
I say 37s with a 10-12 wide at max but I would love any old school look as you mentioned!!
Keep up the amazing work!👍
Bud loving the content, putting out bangers.i think 37s and 12 wides would look🔥
The way he is doing the truck make it look so hard
it looks so good love the vids man.If nothin else you’re getting to know the front end of the truck super well 😂
Looks awesome man. Sitting perfect
the shorty headers for the ole 2 valve 5.4 would wake this truck up and make it sound like a beast Shorty headers are a must
Larry looks sick! Definitely 2inch spacer in rear and swap the grill and front bumper from Big Red. Then 37 Grapps on 03 f150 FX4 stocks, or 24x14's on 35's!
Recently just bought a 2005 crew cab Silverado with a 5.3 in it and I love to see chomper content gonna have to go back and look at what u did love the videos keep it up
24x14 chrome wheels with 37 inch tires would be the perfect setup
Yes Larry! Finally! That looks so effin good dude! I agree with goin old school with it!
I think 37’s on 24x14’s would look nice. Nothing crazy but also kinda crazy at the same time.
That’s what I was gonna say cause 35s even with offset is way to small
24's? them some blackie rims lol not enough tire
“Nothing crazy”
Love seeing you include Lauren in the vids! Keep the posts coming brother, I watch them as soon as they release
Gotta find a set of 16.5x14 welds with 35x16 boggers
I thoroughly enjoyed this upload, Good job man 💪🏽💪🏽🔥🔥
Gon be looking so good luv Larry's upgrades he looked better before but even better now🔥💪🏾
I have been waiting for this video since the first time I saw ol larry great job man
I am agreeing with you I wanna see that old Larry look with the bullet holes and mud graps.
Og 16x12’s and 35s would look awsome. Nice work man!
35x14.50 Boggers on 15x12 bullet holes.👌
My 10th Gen wants to be living like Larry, looks awesome man 🤙🏾
Sickkkkkk bro!! So happy for you man keep up the badass content!
Larry is lookin good, I’m more of a Chevy guy but he looks good. Can’t wait to see what wheel and tire setup you go with.
Looks good. You may think about adding a 2” spacer to the rear the front sticks out more than the rear just how them knuckles do when put on
Done put ole Larry in the clouds. 😮. I dig it man.
Looks great ready to see it on some gladiators again
Just throwing this idea out there. I think you should do a giveaway with Larry after you get it completed! 🤷🏽♂️ 25-50 dollar mystery boxes one box has the keys. That would be pretty cool.
loving the squat
Such a badass truck. New front end grille/bumper swap & complete respray would be🔥🔥
Great video trucks looking good
Love the vid keep up the great work #straightpipelife
brooo i’m loving it!
Looks good brother!! BFTough!!
Think it would look pretty good with the Mickey Thompson classic 3’s 16x12 with a decent 35 or 37 mud grip. It would have a good old school look.
Duuuddddeeee, this has gotta be the best Larry has ever been. By far my favorite so far. I hope sides are in its future 😅
Can't wait until Larry is fully done it would look soo good you have a good taste in trucks I tell you what
Lookin good brother 🤙
I like the welds idea, but definitely wide is the way to go
Man I wanna learn how to do my own work. Clean truck
Looks badass!!
I think you should put ssr swampers and bullet hole to keep it classic.
Looking awesome! don't go higher
Looks soooo darn good😍
Looks perfect maybe biggest tires now all that’s left is to go mudding
39.5 swampers on some old school wide welds would be 🔥
CHASEEE, amazing video.
We need Larry chopping too!! Maybe a cam for Larry? Been watching for years always loved your videos and Ole lare bear💪🏼💪🏼💪🏼
The squat looked so good though 😢
26x14s would be insane. I say find some 22x12 or x14 forged wheels that fit that lug pattern and run some 35 boggers would be sick
16x10 or 12 on 38s on mud graps
37in mud grapps wit 20in 2016 stocks would be 😮💨
I will forever be on the search for this fabtech lift 😅
I just bought one at a junkyard
I just bought a kit and it came with break line extensions, if you get any id love to see a how to video, keep up the larry videos 🔥
It looks so good!!!
Beadlocks with 37’s would looks sweet
Larry looks good
Bro I have been waiting forever for this video
I say do an old school style look. I think all the options you said would be sick. But I think some 16x12 or 16x14 or even a 16x10 and go really big on tires would look sick
I think the old school look would look amazing on it
I really like the idea of a small, wide wheel and some graps
Also, at 0:00 is a phrases I’ve never heard before
Perfect man 🤝
16:43 could be camera angle but it kinda looks like the rear axle ain’t centered in the opening just figured id mention it bc it could cause issues when you go to a big boy tire. I know some lift blocks have off center alignment pins. Larry looks dope btw keep ‘em coming.
I saw that too, I'm glad I'm not the only person who saw that.
Looks amazing brother…any problems with your rear drive shaft angles?
For future reference it’s a lot easier to lift the truck from the rear diff, undo the u-bolts then take two pieces of wood (like the one you stacked on the jack but bigger) and put them under the leaf springs on each side of the wheel hub then lower the truck onto those blocks it will then separate the space you need to remove the old block and replace with new one then Jack the axle back up to put ubolts back in. ALWAYS jack the truck from the rear diff when changing blocks and do one side at a time it will avoid messing up rear alignment.
Looks nice man, do you have to change the upper arms with the new lift?
She’s so beautiful😍😍😍😍
Larry’s really giving me prerunner vibes so I think it would look sick if you went with a prerunner style wheel and tire setup
Great video what kinda of exhaust would you recommend for a Dodge 1500 4.7 v8 I have dual exhaust on it now but just want it a little louder
Do you have aftermarket control arms on as of when you put the lift on??? Tried to put coil overs on my 2000 2wd and it wouldn’t clear with my stock uppers.
Looks like larry is ready for 37s on stocks
I think you should definitely do a og bullet hole setup. 16x14 on 35” boggers
16x14 bullet holes 👌🏻👌🏻
Larry is clean SON!
Forsure gonna have to regear to some 4.33’s or 4.56’s to keep your transmission from burning out
Yea only gonna be at 5k rpm at 60
Nice hey man where can I get that impact looks really handy?
Love Larry man def gotta say no to ex comps on it tho
Looks great can’t wait till those factory wheels are GONE 👍🏻
I wish you would do a ram build
Old school with 37s no doubt 🤞🏼
I think some wide welds would be bad ass
Larry sittin pretty a set 14 wides would tie it together
Spoiler at the end? Lol looking good it needs some slightly bigger wheels like some 18" wheels on 34s. Keep up the good work!
Put Baugher’s on him bro. It looks amazing.
Gotta do the bubba set up
I went with the 5” lift but my wheels have negative camber and are adjusted to the max they can go, did u do anything about it? Change upper control arm?
12 wides on boggers or 16s and 38 Grapps have my vote👍
Put 24-14 on it or 26s reps splits looked amazing on it
I love it
20x10s and graps😮
“it looks and feels absolutely massive”
It would look amazing on some 24s 13g
37s and 12 wides is what it really needs
If you could you can put Step ladders on there if you want to the ones that come down luv larry🔥🐐
Nice
hey men, can you tell me where did you buy this kit? i have a truck similar and i like the results
looking good but you gotta find some 14 wides