Steam Deck OLED ABXY Dpad FACE CLICKY Installation Guide
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- Make your Steam Deck OLED ABXY and Dpad respond more flexibly and accurately!
Solder NOT required!
This is the installation guide for the eXtremeRate Steam Deck OLED FACE clicky kit. The installation is medium-low, you need to deal with some screws and flex cables.
Shop Links:
Amazon US: exr.gg/3yltiTK
Amazon CA: exr.gg/3wD3dyT
Amazon MX: exr.gg/44IxDMX
Amazon DE: exr.gg/44FdHKG
Amazon UK: exr.gg/3JZ1I12
Amazon FR: exr.gg/44EZj5e
Amazon IT: exr.gg/3QJhH7i
Amazon ES: exr.gg/44KVDyL
Amazon AU: exr.gg/44JsDrq
Amazon JP: exr.gg/3K1BzyI
eXtremeRate: exr.gg/4dDIPOG
Aliexpress: exr.gg/44DQQPN
eBay: exr.gg/3ygKutB
Walmart: exr.gg/3QLZO7H - เกม
i bought the kit and went for it. ..i did the dpad only, not the abxy buttons, and the dpad is excellent now, it's perfectly accurate and the difference is huge
Hey there, I am planning on only changing the Dpad as well. What steps did you skip from before the dpad section, if any?
Thanks!
@@LittleWingedKuribo i powered off my steam deck, removed the sd card and then took off the back cover of the steam deck. i didn't disconnect the battery. i then went straight to the section of this video called 'dpad clicky button installation' (6:39) and i then followed the video guide except i didn't heat the original dpad button fpc because it peels off without any problems, ..it just requires a firm pull/peel. Removing the trigger (6:41) feels weird because it feels like it's going to break, it's an odd motion but i managed it eventually despite it feeling like it was going to be damaged. The improvement to the dpad from stock to clicky is wonderful with regards to accuracy and feel but be aware the click of the dpad buttons is a bit loud, i wish it was a bit quieter but it's still a brilliant dpad upgrade anyway
I just got my clicky kit plus transparent orange face buttons and triggers..nervous and excited to get home from work n get started..so far I've only replaced sticks with hall effect so this would b my 2nd time doing surgery thanks for this instruction I feel pretty good about my chances now with screwing anything up
I'm in awe in how good the instructions are. To not only explain in very clear detail what to do, but also including graphics for screw locations, images of the screws, and biggest of all, including small reminders on where someone could make a mistake. So excellent.
Thank you!
I have had hard time removing the trigger; ended up using included spudger, as seen in iFixit's instruction. Also for ABXY I've applied just enough amount of kapton tape across the back of buttons in order to eliminate rattling. overall super happy with the kit!
I HAVE been waiting for this
i finally installed them removing the triggers had me scared i thought i would brake them but the installation is so worth it
nice video! one thing you should know: no one says "FPC" in the west - they say "PCB".
Thanks for let us know, FPC means flex printed circuit while PCB is printed circuit board, we get used with them to distinguish the soft or hard board
@@ExtremeRate oh yeah, in that case the usual term being used is FlexPCB. It's just a matter of what people are used to, that's all.
@@cheater00 I've never once heard anyone say FlexPCB in the USA at least. Always FPC or PCB.
This is a great guide! I just wanna replace the ABXY buttons for Nintendo's format, but I'm happy I found this!!
Hello, ExtremeRate. Are you planning to release Clicky Kit for BDM-040?
Hi, we've released the FACE clicky kit for BDM040, and for the triggers clicky, we plan to release it in July, please stay tuned!
@@ExtremeRate Cool! Thanks for the reply :)
Wait too
Can you guys make a silent button version? That's way too loud for me
Exciting! Cant wait for more oled stuff
The next will be the shell and buttons for OLED, please stay tuned!
@@ExtremeRate Been waiting on the shell since the oled sd came out, appreciate the communication here and on the discord.
Always wanted to replace the awful stock orange power button
I'm so excited for more OLED customization to come! Great video
Thank you! More to come!
please bring led mod for buttons or/and (hall effect)sticks and oldshcool xbox 360 color buttons ABXY for steamdeck lcd and oled
It's great to see parts for the OLED start rolling out. If these are more responsive than the stock buttons, then how about a silent version? In addition, when are the custom buttons and shells coming?
We are studying on the silent version since even we find a suitable silent switch, the noise from the button hit the shell when it rebond still there. Replacemnet shell and buttons will hopefully come out in July, or August.
@ExtremeRate Thanks for the reply. Can't wait for the shells and buttons to hit the market. I like the green shell, however, Emerald Green is a little to light for my taste. How about a dark green? Like the green on the Translucent Green OG Xbox, or even a Jungle Green like on a N64? Those would look pretty damn sick.
the dpad is imporve but the button I feel too hard so i dont use the ABXY just dpad
I have buttons and d-pad I originally bought for the LCD model. Can I install them in the OLED model? Or will ExtremeRate be coming out with OLED compatible buttons?
Can you please do mouse click triggers ps5 bdm 040
Yes and hopefully will release in July, please stay tuned!
Can someone tell me if this solves the looseness on xyab buttons on oled version? It is driving me crazy. TY
Hola , me gustaría hacer una colaboración, dónde me puedo contactar
Ordering this right now. Im so over The muschy abxy Buttons. 😂
lol
where isthe all click kit for dual senve edge, been waiting
Please stay tuned!
I have a question I recently purchased the clicky triggers for bdm 020 controller and after install the L2 and L1 aren’t working do you have any idea why that is ? I would really appreciate some help/feedback
Sorry for the issue. Please contact our customer service via email at info(at)extremerate.com, we will send you a new part of the L1L2 to try.
Can we get Led Lights mod strips for ps5 Slim
We are working on it, pelase stay tuned
Extreme rate in gonna ask you a question
What kind of freak would want face buttons this clicky. Lol
Me im that freak
me
Someone who likes to game on their own....
How much better is the responsiveness than the stock pads? And if they are better any chance of coming out with a silent kit?
We are studying on the silent version since even we find a suitable silent switch, the noise from the button hit the shell when it rebond still there.
i didn't heat the original dpad button fpc (shown at 8:47), i just tried to peel it off without heat and it peeled off with very little effort and nothing was damaged plus no old glue remained. ...so in my opinion you can skip the heat part
Thanks so much i was wondering this myself
I need to be convinced the D-Pad will be more responsive, especially for retro gaming. Can anyone help? Is it worth the hassle? Thank you.
hell yes it's definitely worth it for retro gaming or any gaming, ..my dpad is now brilliant accurate responsive etc. it's pretty easy to do and works perfectly
finally can change my squeshy dpad and keys bought it now
Wish it wasn't so loud
If anybody buys this, only do your D-Pad, I’ve had these for about 3-4 months & I don’t press my buttons hard, all is working fine but the A button doesn’t really click anymore
If you need any after-sale support, please contact us by email and we will send you a new replacement - retail@extremerate.com
Hey extremerate, I’m asking if you could make trigger clicky kit and face button click kits for the bdm 040 ps5 controller thank you 👍
This video really helps me a looot. Now I have finished my buttons mod. Thank you!!
What are the plastic adhesive star things for that are jn the kit.
Why do they give you 2 PVT sticky sheet things?
When r the steam deck oled shells and buttons coming out? I really want the gold one and red clear buttons
Watch the video bro. They are for the D-Pad
Does doing this affect warranty?
It absolutely does - in case you haven’t done it
awesome
Very nice Guide, love that mod so much :)
Glad you enjoy it!
Bring Ps vita shell
We will try!
@@ExtremeRate can you guys make custom sliding ps vita shell for ps vita 2000 model, like the psp go but with round corner rectangular shape. I think it will be easy for you guys because the ps vita display size and other components are already in perfect position.