$30 Drone - Eachine E017 Review & FPV mod
ฝัง
- เผยแพร่เมื่อ 18 มิ.ย. 2024
- Eachine E017 - www.banggood.com/custlink/33K...
AIO Camera/VTX - www.banggood.com/custlink/Gm3...
FPV Screen - www.banggood.com/custlink/GKK...
Blu-tak - amzn.to/3T6yyiX
__________________________________________________________________________
Support the channel by clicking these affiliate links when purchasing parts at these sites!
RDQ - www.racedayquads.com?aff=58
GetFPV - bit.ly/3RroJf8 (5% off Coupon - 0KC6D3YB02RN)
BetaFPV - betafpv.com?sca_ref=1435233.qFHxUmh5f2
Banggood - www.banggood.com/custlink/v3G...
Insta360 - www.insta360.com/sal/one_rs?i...
__________________________________________________________________________
Just getting into FPV?
This kit includes everything you need to get started!
bit.ly/3Denags
Frames
5”: RDQ Sourceone V3: bit.ly/3vCnPDC
5”: iFlight XL5: bit.ly/3wfgwTr
3”: Shendrone Squirt V2: bit.ly/3bu3zNQ
2.5”: Betafpv Pavo25: bit.ly/3Nhmet7
Flight Controllers
Mamba F7 MK4 Stack: bit.ly/3zUDPU9
Speedybee F405 V3 Stack - bit.ly/3L4SpMJ
26x26 (Whoop) iFlight Beast AIO: bit.ly/3oQ8KdR
Motors
Xilo Stealth Motors - bit.ly/3x7se2o
Emax ECO II Motors: bit.ly/34QovLv
HGLRC 3600kv Motors: bit.ly/3SnakRY
Digital DJI System
DJI FPV Goggles V2: bit.ly/3qfTEzr
Caddx Polar Vista: bit.ly/3tsqTSp
Runcam Link Pheonix: bit.ly/3eBGGJp
TX/RX
TBS Ethix Mambo: bit.ly/3L2kXGx
TBS Crossfire: bit.ly/3qnUKbZ
Batteries:
6s Tattu 1050: bit.ly/3ztaJJZ
6s GNB 1100: www.banggood.com/custlink/G33...
4s CNHL 650: bit.ly/3zUOFti
4s BetaFPV 750: bit.ly/3Sq8MXq
Recommended Budget Gear:
Controller - www.banggood.com/custlink/vKD...
Goggles - www.banggood.com/custlink/GKK...
Other Equipment:
Torvol Backpack: bit.ly/3zU9G7j
Electric Multi-tool: www.banggood.com/custlink/GDK...
Naked GoPro Hero 8 Case & BEC: bit.ly/3yuWjI5
DJI Air 2 S: bit.ly/3QERAfJ
GoPro Hero 9: amzn.to/349z9Ju
GoPro Hero 10: amzn.to/3ILPAyC
Sony A7iii: amzn.to/3QvV82L
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I will receive a small commission. This helps support this channel and allows me to continue to make videos like this. Thank you for your support! - วิทยาศาสตร์และเทคโนโลยี
0:48 is the most amazing and important thing
I total dig you're bringing it back to the basics because this is really where FPV started for many and are true to our hearts I still fly my tiny whoop all the time much respect to a bro
Ive tried looking in the link he provided but it says there all out. Do you have any possible alternatives?
@theloser2575 inductrix or inductrixfpv fc for spektrum.. depends on what protocol u want!
Oh ok cool thanks! But I meant the screen, sorry about that.
It’s small innovative ideas like this that make dads look like genius inventors. Thanks!
I picked up one of these as my first drone and it's a ton of fun. I plan on doing the FPV mod as soon as a I have a monitor for it.
That’s rad. Thanks for doing something creative with this little guy
I order a couple after watching Nick's video. They arrived today and are super fun already. Thanks for a great summary, your instructions were a lot simpler than trying to figure out what the manual really means. Now just have to wait for the NTSC version of the little camera comes back into stock. Too bad the little monitor now seems to be $70 (CDN), maybe a deal will come on.
WOW! That's a very stable drone. It even hovers so well!
yea I was surprised at how well it actually held its position!
Thanks I’ll be making one soon as the post arrives
Always impressed with your solder joints, always perfect..
haha they haven't always been this clean. Definitely takes practice!
@@TRONCATFPVand some flux
Done this alot of times. Changed out the motors with higher KV ones.. The flightcontroller/ESC can take a lot of abuse.
I started out with those things.
Can we see you dorne colection
I like this idea. I'll add it to my queue of video ideas, thanks!
Fu
Dude that was sweet, been wanting to set up something like that for my RC truck.
GR8!!!! Thanks Mate....Luvit!!
I've just dine this myself after watching Nick Burns video. Just stumbled on yours.
Enjoyed it.
I think it would be nice to have this hover setting for angle mode in betafight...Great for beginners.
I noticed that we posted our review videos on this drone a couple hours apart haha
Glad the video(s) helped ya!
and yes agreed, I was surprised at how well this drone actually held its position.
Thanks for watching!
Nice Video!
Nice video I'll recommend to my starter friend
You can take the pcb of a phone connect the camera of the phone to pc with ip and and a small battery to keep the camera working. The additional weight is the pcb and a tine battery
omg tysm for showing me how to make a fpv drone for that cheap
Really cool!
Depending on your ambient temp and the camera used the heat might (will) loosen the bluetak, also the bluetak can insulate board components from airflow and over heat them. NOT a good idea. I use a tiny plastic baseplate superglued to the PCB edges of the AIO to retain air gaps and then double sided foam tape (industrial strength). Can be lighter, too 🙂
For a drone this size you really don't have to worry about heat. The drone hasn't gotten hot at all, the VTX is on 25mw and generates almost no heat either.
Removing the canopy will help with air flow if anything.
I did it so many times, I threw on some tri-blades and an eachine txo sometime lol. It was such a great beginner fpv drone for me, and I have crashed mine hundreds of times lol , I highly recommend , now I fly regular 5-7” Fpv drones and tinywhoops
can i use 250mW vtx without external battery supply?how long it could go before the juice juns out?is that a good idea?or should i buy a 25mW?
@@mehedihassan8944 I’d say it would fly about a good 2 minutes indoors
@@Legacy2.00 what about 25mW flight time?
At least 3 min( from my experience) sometimes flight lasts almost 4 or even five minutes, I made the mistake of having a camera that drew way to much power, I soldered the came straight to the drone ! But it’s a good investment, like a gateway drone.
@@Legacy2.00 thanks man
Finally a budget fpv drone
Do you have any suggestions for selecting extra replacement/upgtade batteries?
Wonder how the range is with the video transmission before it starts to really break up?
What was the runtime with the camera attached?
Make a video trying to put a elrs receiver on it LOL. I could maybe fit, in with some nano receivers.
What Protocol is required on the transmitter to bind with this drone?
How do i look at its camera? Tutorial please or an explanation for my project
I want to buy the camera and the drone but how do you save the drones video to gallery on your phone
Great video! I just bought a DJI Avata (my first ever drone) and practice on various "games" on steam on a PS4 controller. I really appreciate you list in the text for all the various gear recommendations. I bought a E017 since I got a tip this was a really good cheap drone to pratice with. Still waiting for it to be delivered. But your video showed a really cool way to step it up.
So thank for a good info./video.
#sub:bed
Extra question. What are you filming with when you did this video?
The E017 is definitely a solid affordable practice drone. add the FPV camera and you've got a pretty quick little FPV drone.
I use a Sony a7iii to film my videos. I was using my iPhone up until a few months ago lol. Glad the video helped! 🤙
Is it possible to connect the camera to the phone instead?
Hi .. your video is very interesting .. I have a question .. i just bought a cheap drone .. but the camera was not good enough .. if I change the the camera .. is there anthings else that I should change too.. ?
I’ve tried looking in the link for the screen, but it says there all out. Do you have any possible alternatives?
there is the automatic landing with a button on the controller?
Lol not the cinewhoop build I was hoping for but I’ll take it great video as always
Haha this coming friday 😉
The parts list and some other goodies are up on my newly set up patreon 🤘 - bit.ly/3eh8ZNv
@@TRONCATFPV sweet can’t wait
@@TRONCATFPV yeah that build looks amazing can’t wait
can i use 250mW vtx without external battery supply?how long it could go before the juice juns out?
Pardon my newb question but I'd actually like to try my hand at making my first fpv. When I checked your link for the camera, I see it has two wire harnesses, not one (w/2wires) like you had. I'm guessing the 4 wire harness is for audio? Shall I simply un-soldier those 4 wires?
those 4 wires are for camera control I believe. The only wires you really need are the power and ground 👍
Do it need skydroid
How do you make it into a freestyle
that board looks very similar to the e011 from eachine that i was hacking silverware onto. have you tried reflashing? is it possible? thanks!
its a shame they dont make those anymore, there used to be tons of little toy drones that you can hack and they came with better motors.
these days I guess that e017 is all you get
Nice
Hi, is there any way that we can mod eachine E017 to acro mode?
I already have Eachine TX06 700TVL FOV 120 Degree 5.8Ghz but i dont know what kind of receiver i need that is compatible, any idea about "Eachine ROTG01 Pro UVC OTG 5.8G 150CH Full Channel FPV Receiver W/Audio For Android Smartphone?"
where to get extra or upgrade props?
are these durable and easy enough for a 5 year old to fly?
perfetto per chi inizia
Can we see it fly outdoor.
What is that for a screen?
Nice. Can this drone be bound with Spektrum DXs controllers?
If you've got money to waste on overpriced Spektrum gear, why would you be interested in this toy???
Can you bind to jumper jp4in1 broo?
"E017" protocol.
You gonna make a case
Great capable bit of kit but Anyone got this working with multi protocol module?
As I've added elsewhere "E017" is now available.
my camera is 5g, and it causes the drone to go all the way up, anyway to counteract this?
Adding a 5gram camera won't make your E017 "go all the way up" - UNLESS you have been dumb enough to block the little hole in the barometer unit on the flight board! 😉
Also it would be better to try to center the added weight (or slide the battery back) to equalize the extra load on the motors if you want them to last.
noice
Can you bind this to any remote?
i'm not really sure, there are additional pads on the flight controller so i bet you could solder up an ELRS receiver or something!
How much it will cost a FPV camera and a screen like you
The FPV camera is $16 and that screen I believe is like $30
Included some links to those products in the description 🤘
You make soldering looks easy 😧
haha thank you, it takes practice!
Check out some of my older videos from a couple years ago, my soldering was VERY janky lmao
am i supposed to select PAL or NTSC?
If you're in the US choose NTSC
EU choose PAL
@@TRONCATFPV thanks
What’s the difference
Can You Use A Phone As A FPV SCREEN?😀😀😀😀
If only it could go full acro
Hi
Bruh am about to butcher this cheap $45 temu drone amd turn it into a fpv drone wish me luck
cant you solder in crossfire? 🤣🤣
maybe I can also thro on an 800mw VTX and take it out for some long range tests lmao
I would never do this and try this ever in my life it's just physically so bad and trash