Just successfully finished this project on a resurrected Cetus X. Thanks for this awesome video....followed it step by step (including the mount from RDQ) and it worked very well.
What are the flight times before and after and with out the camera connected does it still drain that much battery without accounting for aero dynamics and a little extra weight
I have since 2023-04 an antenna mod video. In my opinion the perfect antenna for the Cetus X FPV kit suitcase and for other quads with a circular antenna ! As an example: If you want to fly another drone with the kit, such as the Happymodel Crux35.
Thanks for the idea! I have a question. Is it possible to solder the FC wire going to the camera so that there was not only the power but also the on / off video recording control, which is set for the buttons in the "betaflight configurator"? Sorry if this is a stupid question, this is my first drone and I have not figured it out yet)
Hi, thanks for this video, i want to do this for better footage but i just got the cetus x and a eachine 800d analog goggles, this camera is only for recording or it turns the drone into a digital system?
I tried a similar setup on Geprc Thinking P16. I got a reduction in flight time from 7 minutes to 4 indoors, strong vibrations when flying through doorways. Do you plan to tell how you will set up pids?
is this on the cetus fc version or the betaflight version, I have a frsky remote instead of elrs and I think the elrs version has more vtx. If I could get any pointers that would help a lot.
Looking for advice. Would you get the Cetus X and Thumb 4k, or the GEPRC TinyGo 4k? What is the better choice? The better video quality is the priority for me.
@@thegerisz The TinyGo, and I was happy with it. Decent, not terrific, video quality. Unfortunately, I lost it yesterday. I got a bit throttle happy, flew it too high and wind took it away. Spent 3 hours looking for it in the crowded park, but no luck. I mention this because I think I will replace it, because I was happy with it.
@@thegerisz Forgot to mention, if you get Tiny Go 1.3, it has a black box, and it provides gyro data (.gcsv) in sd card. Mine did, and was advertised as 1.3. If you buy directly from GEPRC it will definitely have it. The older versions might not, but even then it can be added rather easily.
Great upgrade. thanks for the video. What the difference in flight time with runcam thumb and without it? what do you think about setting runcam thumb on cetus pro, will the power of pro be enough to flight with added cam? thanks. good day.
Bro, the standard video system antenna is very weak, how far can you fly away and what about the obstacles? According to my feeling, I constantly see interference at a very close distance.
Excelente idea , que voy a poner en marcha , pero , y como graba ? tiene ranura para tarjeta ? , como se pone en marcha y para la grabación? , como se enciende la camara ??
Dope.i want to do that on my aquila 16.can you suggest a proper solution to fix the runcam thumb pro on the aquila 16.i doesnt find anything and iam not in the 3dprinting stuff.
Great video, I'll be doing this. A real surprise to see you flying around my town's common, I usually go up behind the junior high school. I live up by the train station. I subscribe the other day, looking forward to the next video.
![กิโลเมตรที่ 0 เดินทางรอบโลกไม่ใช้เครื่องบิน [Around The World Ep. 1]](http://i.ytimg.com/vi/toJG9oofLFY/mqdefault.jpg)
Just successfully finished this project on a resurrected Cetus X. Thanks for this awesome video....followed it step by step (including the mount from RDQ) and it worked very well.
very excited to see the drone tour with this setup! With the decreased size it think you could get even more creative gaps
What are the flight times before and after and with out the camera connected does it still drain that much battery without accounting for aero dynamics and a little extra weight
Curious if you were able to get the wobbles out with a better PID tune? Thinking of doing this as my first entry into FPV.
I have since 2023-04 an antenna mod video. In my opinion the perfect antenna for the Cetus X FPV kit suitcase and for other quads with a circular antenna ! As an example: If you want to fly another drone with the kit, such as the Happymodel Crux35.
for example which modol for cetus x?
Thanks for the idea! I have a question. Is it possible to solder the FC wire going to the camera so that there was not only the power but also the on / off video recording control, which is set for the buttons in the "betaflight configurator"? Sorry if this is a stupid question, this is my first drone and I have not figured it out yet)
I ordered a thumb for the cetus x and a thumb pro-w for my 3,5" quad. I gonna use the naked thumb (only pcb no case) on the cetus x.
What’s your lipo autonomy ?
1 or 2 min ?
Great work !
I was wondering if you are flying with Cetus, you are watching with the standard camera, right? Meanwhile the 4k camera is recording the video, right?
Yes
No, the video you saw cones from the 4k camera... 100%
R u new
That's exactly what he said
what screws did you use?
What are those new screws? Can we use the ones that comes with runcam?
The longer camera screw where u got those
hello. I am a beginner who just started FPV in Korea. I also have CETUS X, but I want to get RUNCAM THUMB MOUNT. How can I get it?
doesnt fpv camera move forward and backward spontaneously by the weight of the Thumb camera ?
WIll this work on the Cetus Pro model?
What's that neat screwdriver your using, looks great
Great video. I have the Cetus X and plan to follow your advice and make this build. Did you happen to find a better pid tune?
@w613 345 I did this build and have multiple vids flying the cetus x on my channel, feel free to check them out! It's a great quad.
@w613 345 thanks man. I am doing a version 2 of my build of this. It will have a pid tune
@@2J.Racinghow has the flight time changed witce the camera connected?
How long was your flight time before and after installing the camera?
aaahhh but the GEPrc tiny go is similar in price and does 4k built in
If you have dvr googles then yeah but those cost more than the drone i think or maybe lower but still expensive
Thanks for your video, your Flight controller is a Cetus or a Betaflight?
Hi, thanks for your video! Does the RunCam Thumb Pro 4k or the drone capture audio like the GepRC tinygo? THX
Thank you for this awesome video! After watching it I immediately bought a Run cam thumb pro for my cetus x)
can you give feedback on flight time with it ? :)
@@plop386 depends on the pace of flight and the degree of novelty of the batteries, usually with me it takes 3 minutes
Thank you! Can you please advise whar screws will I need? Is ut m2 x16?
Thanks!
Havn't you tryed uart controll? As I understood thumb has a support of it's own protocol in betaflight
literally was looking for this mod and lo and behold. nice!
@TRONCAT FPV were you able to get more stable 4k footage with the thumb? was it due to windiness or PID adjustment?
Where can I get the fixation mount for the cam?
did you change pids or other settings in betaflight for flying with a thumb pro?
Is it gonna display on the goggles ?
Why not use the Insta360 go 3 for a better stabilization ?
Hi, thanks for this video, i want to do this for better footage but i just got the cetus x and a eachine 800d analog goggles, this camera is only for recording or it turns the drone into a digital system?
Hello! How long was the flight with the camera installed?
That what we all want to know
I tried a similar setup on Geprc Thinking P16. I got a reduction in flight time from 7 minutes to 4 indoors, strong vibrations when flying through doorways. Do you plan to tell how you will set up pids?
@@TrueNorthZero Just like in this video. 5v from the flight controller.
is this on the cetus fc version or the betaflight version, I have a frsky remote instead of elrs and I think the elrs version has more vtx. If I could get any pointers that would help a lot.
how much shorter is the battery life?
Looking for advice. Would you get the Cetus X and Thumb 4k, or the GEPRC TinyGo 4k? What is the better choice? The better video quality is the priority for me.
I'm looking at the same question myself.. leaning towards the Cetus X and Thumb 4k, because of gyro stabilization. Which one did u end up going for?
@@thegerisz The TinyGo, and I was happy with it. Decent, not terrific, video quality. Unfortunately, I lost it yesterday. I got a bit throttle happy, flew it too high and wind took it away. Spent 3 hours looking for it in the crowded park, but no luck. I mention this because I think I will replace it, because I was happy with it.
@@eraldylli thanks! Expensive 3 hours, sorry to hear it!! 😢
@@thegerisz Forgot to mention, if you get Tiny Go 1.3, it has a black box, and it provides gyro data (.gcsv) in sd card. Mine did, and was advertised as 1.3. If you buy directly from GEPRC it will definitely have it. The older versions might not, but even then it can be added rather easily.
Great upgrade. thanks for the video. What the difference in flight time with runcam thumb and without it? what do you think about setting runcam thumb on cetus pro, will the power of pro be enough to flight with added cam? thanks. good day.
Привет, i'm also wondering. if you find out let me know.
i think i will give it a go next month anyway, so i can tell :D
Bro, the standard video system antenna is very weak, how far can you fly away and what about the obstacles? According to my feeling, I constantly see interference at a very close distance.
Good morning. what to be the maximum range of use of the cetus ?
Is it possible to just replace the existing camera with this and just have this camera and you see through this camera in the goggles
Great idea, but I would chose the Insta360 GO2 for this. You don't have to solder anything, because the insta is autark
True you won't have to solder, but the Go 2 weighs about double the runcam thumb.
Plus it doesn't film in 4k.
@@TRONCATFPV ok only 2k, thats true.
But the weight is 21g I think.
But yeah, 16g is really lightweight!
Do you have a suggestion for motor upgrade?
Excelente idea , que voy a poner en marcha , pero , y como graba ? tiene ranura para tarjeta ? , como se pone en marcha y para la grabación? , como se enciende la camara ??
You're awesome dude, keep it up!
🙌🙌🙌
III JUST GOT THE CETUS AND I AM DOING THAT ALSO!
and how much your flight time decreased ? :)
Nice little set up!
ids he using the cetus FC or the betafligth FC
I have the cetrus fpv pro does this work too?
Nice mod. Thanks for the video and the idea. 😊
At 8:13 is the camera/drone vibrating or is it rolling shutter issue?
in which mode are you flying? manual or not?
Hey you wouldn’t know what may cause the drone to go full throttle once I push up ! It’s stuck
which electric screwdriver are you using ?
This is amazing. Love your vids.
Dope.i want to do that on my aquila 16.can you suggest a proper solution to fix the runcam thumb pro on the aquila 16.i doesnt find anything and iam not in the 3dprinting stuff.
since the aquila is 1s it probably stuggels a bit more with the weight
Nice video 👍What is the music you used?
Great video, I'll be doing this. A real surprise to see you flying around my town's common, I usually go up behind the junior high school. I live up by the train station. I subscribe the other day, looking forward to the next video.
I used to fly at the Marshall Middle school all the time! That abandoned building down the railroad tracks over there is a pretty fun spot too 🙌
i just build it and its super fun but hard to fly, specialy with lets thann 50% of battery, the 16 grams really affect the litlle drone
分かり易い取付け方ありがとうございます 非常に参考になりました。JAPAN
when you have the rates can you please share them?
will do 👍
how long do you fly with the camera on?
there's an option for the mounting the insta360 go 2 ?
Consigo fazer esse mesmo procedimento de instalação no cetus pró? Quero por a runcam ...
Vou por o fio vermelho no 5v e o preto no GND ...
can I use the normal runcam thump the 1080p on that 3d print
I saw some jello, is this footage gyro stabilized already?
It was mainly due to wind and stock pids
Great tutorial. Thanks!😊
how can I attach a camera to aquila 16?
I think i will give up my plan to change the frame to a 2,5" carbon. Because I will use it as a Cinewhoop for save 4K flights close to people...
can u make that camera into aquila16?
Do you think that would be possible with a cetus lite?
I tested it for y'all, it doesn't. Either with cetus from the normal kit. It work with cetus X tho
It is versión cetus fc or bêta flight fac ?
Thank You very much! I Need this hack
What is the maximum distance of Cetus?
Does this 3d model work for insta360?
Hey did you ever find an answer to this? I'm also interested since I have the go 2
Nice. I gonna try the same.
is cetus lite fit to this setup?
The mount that I designed for this is specific for the cetus x
Awesome!
nice, thanks for the video
can you attach this on a cetus pro?
like i mentioned in the video, this mount is made only for the cetus X
Can I get a mount?
ありがとう😊♫
Nice
trop de jello
Muito bom amigo
норм
Will this mount also work with the insta360?
Insta 360 go has 2-3 x more weight so maybe to heavy...